Regulatory effects of Trichinella spiralis serpin-type serine protease inhibitor on endoplasmic reticulum stress and oxidative stress in host intestinal epithelial cells.

Endoplasmic reticulum stress (ERS) and oxidative stress (OS) are adaptive responses of the body to stressor stimulation. Although it has been verified that Trichinella spiralis (T. spiralis) can induce ERS and OS in the host, their association is still unclear. Therefore, this study explored whether T. spiralis-secreted serpin-type serine protease inhibitor (TsAdSPI) is involved in regulating the relationship between ERS and OS in the host intestine. In this study, mice jejunum and porcine small intestinal epithelial cells (IECs) were detected using qPCR, western blotting, immunohistochemistry (IHC), immunofluorescence (IF), and detection kits. The results showed that ERS- and OS-related indexes changed significantly after TsAdSPI stimulation, and Bip was located in IECs, indicating that TsAdSPI could induce ERS and OS in IECs. After the use of an ERS inhibitor, OS-related indexes were inhibited, suggesting that TsAdSPI-induced OS depends on ERS. When the three ERS signalling pathways, ATF6, IRE1, and PERK, were sequentially suppressed, OS was only regulated by the PERK pathway, and the PERK-eif2α-CHOP-ERO1α axis played a key role. Similarly, the expression of ERS-related indexes and the level of intracellular Ca2+ were inhibited after adding the OS inhibitor, and the expression of ERS-related indexes decreased significantly after inhibiting calcium transfer. This finding indicated that TsAdSPI-induced OS could affect ERS by promoting Ca2+ efflux from the endoplasmic reticulum. The detection of the ERS and OS sequences revealed that OS occurred before ERS. Finally, changes in apoptosis-related indexes were detected, and the results indicated that TsAdSPI-induced ERS and OS could regulate IEC apoptosis. In conclusion, TsAdSPI induced OS after entering IECs, OS promoted ERS by enhancing Ca2+ efflux, and ERS subsequently strengthened OS by activating the PERK-eif2α-CHOP-ERO1α axis. ERS and OS induced by TsAdSPI synergistically promoted IEC apoptosis. This study provides a foundation for exploring the invasion mechanism of T. spiralis and the pathogenesis of host intestinal dysfunction after invasion.

Enabling Long-Lived Polymeric Room Temperature Phosphorescence Material in Abominable Solvent.

Long-lived polymeric room temperature phosphorescence (RTP) materials have drawn more attention due to their convenient preparation process and equally efficient phosphorescence performance in recent years. As the polymer matrix is sensitive to air and humidity, some non-covalent interactions in the matrix are easily decomposed in water or air, which means that it is difficult for this material to be stored stably for a long time in the atmospheric environment or under harsh conditions. In this work, polymer powder mBPipQ contains aromatic and piperidine rings that are designed and synthesized successfully. Then the polymer is uniformly dispersed into epoxy resin matrix to form long-lived polymeric RTP material with efficient afterglow properties. The stiff backbone structure of mBPip and dense molecular arrangement of epoxy resin provide a rigid environment to stabilize triplet excitons, the RTP performance is greatly enhanced. The lifetime of mBPipQ in epoxy resin is 2 times higher than that of small molecule chromophore in that one. Interestingly, after soaking in strong acid or alkali solution for 10 days, the material can still emit stable and efficient long-lived phosphorescence. It is thanks to the hard matrix after full curing, which can provide a protective layer to prevent external quenchers from interfering with phosphorescence emission. Utilizing the efficient phosphorescence emission and excellent abominable-solvent resistance of this RTP material, multilevel information encryption has been successfully demonstrated. This work broadens the application scope of polymeric RTP materials in harsh environments and provides a new idea for achieving efficient RTP emission.

Stereogenic-at-Cobalt(III) Complex Catalyzed Halocyclization of Alkynes: Enantioselective Access to Axially Chiral ortho-Halo-C2-indoles.

Here, we report an anionic stereogenic-at-cobalt(III) complex catalysis strategy for the enantioselective halocyclization of ortho-alkynylanilines using N-halosuccinimide (NXS) as the halogen source. This protocol provides a distinct atroposelective approach to access the axially chiral ortho-halo-C2-indole skeletons in excellent yields with good to high enantioselectivities (up to 99% yield, 99:1 er).

First report of Meloidogyne javanica infecting Bletilla striata in Yunnan, China.

Bletilla striata (Thunb. ex Murray) Rchb. F. (Orchidaceae) is an endangered traditional Chinese medicinal plant and has been traditionally used for hemostasis and detumescence in China (Wang et al. 2022). In March of 2021, during a field survey in Xuanwei city, Yunnan province, China, some B. striata plants with symptoms of plant dwarfing and leaf yellowing were observed. Roots of diseased plants presented numerous galls, typical symptoms of root-knot nematodes (RKNs) infection. The diseased area was approximately 66667 m2, showing a patchy disease distribution pattern. To identify the species of RKNs, females and eggs were isolated from galled tissue, and second-stage juveniles (J2s) were collected from eggs hatched. Nematodes were identified through comprehensive morphological and molecular methods. The perineal pattern of females is round to ovoid with a flat or moderately high dorsal arch and has two conspicuous lateral line striae. Morphological measurements of females (n=20) included body length (L) = 702.9 ± 70.8 (556.2-780.2) µm, body width (BW) = 404.1 ± 48.5 (327.5-470.1) µm, stylet length = 15.5 ± 2.2 (12.3-18.6) µm, distance from base of stylet to dorsal esophageal gland opening (DGO) = 3.7 ± 0.8 (2.1-4.9) µm. The morphometrics of J2s (n=20), L = 438.4 ± 22.6 (354.1-464.8) µm, BW = 17.4 ± 2.0 (12.9-20.8) µm, stylet length = 13.5 ± 0.4 (13.0-14.2) µm, DGO = 3.2 ± 0.6 (2.6-4.7) µm, and hyaline tail terminus = 12.3 ± 1.9 (9.6-15.7) µm. These morphological characteristics were similar to the original descriptions of Meloidogyne javanica (Rammah and Hirschmann 1990). DNA extraction was done 60 times, each from a different single females following the method of Yang et al. (2020). Amplification of ITS1-5.8S-ITS2 region of rDNA and the coxI region of mtDNA was done by using primers 18S/26S (5'-TTGATTACGTCCCTGCCCTTT-3'/5'-TTTCACTCGCCGTTACTAAGG-3') (Vrain et al. 1992) and cox1F/cox1R (5'-TGGTCATCCTGAAGTTTATG-3'/5'-CTACAACATAATAAGTATCATG-3') (Trinh et al. 2019) respectively. The PCR amplification program followed the method described by Yang et al. (2021). The ITS1-5.8S-ITS2 gene sequence (768 bp, GenBank Accession No. OQ091922) showed 99.35-100% identical to the known sequences of M. javanica (GenBank Accession Nos. KX646187, MW672262, KJ739710, KP901063, MK390613). The coxI gene sequence (410 bp, OQ080070) showed 99.75%-100% identical to the known sequences of M. javanica (OP646645, MZ542457, KP202352, KU372169, KU372170). Furthermore, M. javanica species-specific primers Fjav/Rjav (5'-GGTGCGCGATTGAACTGAGC-3'/5'-CAGGCCCTTCAGTGGAACTATAC-3') were used for PCR amplification. An expected fragment of approximately 670 bp was obtained, which was identical to that previously reported for M. javanica (Zijlstra et al. 2000). To verify pathogenicity of this nematode on B. striata, six 1.6-year-old tissue culture seedings of B. striata were maintained in 10-cm-diameter × 9-cm-high plastic pots containing a sterilized mixed soil (humus soil: laterite soil: perlite=3:1:1), and each plant was inoculated with 1000 J2s hatched from eggs of M. javanica. Three non-inoculated B. striata were used as the negative controls. All plants were placed in a greenhouse at approximately 14～26 ℃. After 90 days, the inoculated plants presented symptoms of leaf yellowing, and the roots with root knots identical to those observed in the fields. The root gall rating was 2 according to the 0-5 RKNs rating scale (Anwar and McKenry, 2002) and the reproductive factor (RF= final population/initial population) was 1.6. No symptoms or nematodes were observed on control plants. The nematode was reisolated and identified as M. javanica by morphological and molecular methods as above. To our knowledge, this is the first report of infection of M. javanica on B. striata. The infection of this economically important medicinal plant with M. javanica could pose a great threat to B. striata production in China, and further research will be necessary to develop control strategies.

Palladium-Catalyzed Stereoselective Cleavage of C-P Bond: Enantioselective Construction of Atropisomers Containing a P-Stereogenic Center.

The transition-metal-catalyzed C-P bond cleavage has emerged as a powerful tool for the formation of both C-C and C-P bond. However, the transition-metal-catalyzed stereoselective cleavage of C-P bond is still undeveloped. Herein, we report a palladium-catalyzed stereoselective cleavage of C-P bond for the construction of P-stereogenic phosphines and stereogenic axis. This protocol enables the quick synthesis of atropisomers bearing a P-stereogenic center in high yields, diastereo- and enantioselectivities of up to 98 % ee, >25 : 1 dr. The product is able to serve as chiral catalyst in phosphine catalyzed [3+2] cycloaddition of allenoates to imines, showing the great potential of the present methodology.

Tunable polarization-sensitive, long-wave infrared MDM subwavelength grating structure with wide-angle, narrow-band, and high absorption.

This paper proposes a polarization-sensitive, metal-dielectric-metal (MDM) subwavelength grating structure based on surface plasmon resonance that achieves wide-angle, narrow-band, and high absorption in the long-infrared region. The resonance characteristics of the MDM structure, excited by magnetic resonance (MR), cause the transverse magnetic (TM) and transverse electric (TE) modes to polarize. A model of the inductor capacitor (LC) circuit is also presented. Structural simulations demonstrate a near-perfect absorption characteristic (99.99%) at 9 µm center wavelength. For TM polarization with incident angles ranging from 0° to 89°, the MDM grating structure produced absorption rates over 90%, 81%, and 71% for incident angles of 66°, 73°, and 77°, respectively. The absorption peaks in the long-wave infrared band can be adjusted by varying the duty cycle or period, without adjusting structural parameters. The spectral absorption curve shows a red shift and maintains high absorption, with wide-angle and narrow-band, across various azimuth angles (0-90°), during an increase in duty cycle or period. This method reduces the difficulty and complexity of micro-nano processing, and enables multiple absorbers in the long-infrared band (7.5-13 µm) to be processed and prepared on the same substrate surface.

Regenerative and protective effects of calcium silicate on senescent fibroblasts induced by high glucose.

Diabetic wounds are a common complication of diabetes and therefore a pressing issue for clinicians. High-glucose (HG)-induced fibroblast senescence is mainly responsible for delayed wound healing. Calcium silicate (CS), a kind of bioceramic, is thought to have regenerative properties. The aim of this study was to determine the regenerative and protective effects of CS on senescent fibroblasts induced by HG. Fibroblasts were passaged five times and treated with HG and CS. Compared with the normal glucose (NG) group, the proliferation, migration, and differentiation capacity of HG-induced fibroblasts significantly decreased (P < .05). After treatment with CS, the functions of HG-induced senescent fibroblasts were partly restored (P < .05). The mechanism of the regenerative and protective effects of CS may be related to the decreased reactive oxygen species generation, improved senescent state (SA-ß-gal expression decreased), up-regulated expression of Smad2 and phosphorylated Smad2, and down-regulated expression of p16, p21, and p53. An in vivo experiment also demonstrated that CS had a therapeutic effect on diabetic wounds via differentiation of fibroblasts into myofibroblasts and enhanced collagen deposition. These results indicate that CS may be a promising candidate for diabetic wound therapy.

Illumination uniformity improvement in digital micromirror device based scanning photolithography system.

Illumination uniformity in photolithography systems determines the dimensional difference across the entire lithographic substrate. However, traditional lithography system relies on expensive and complex illumination system for achieving uniform illumination. In this paper, we propose a simple and cost-effective method based on the modulation of digital micromirror device to improve illumination uniformity. The modulation according to a digital mask achieved via an iteration program improves the uniformity to be above 95%. We demonstrate the effectiveness of the method by experimentally fabricating a linear grating. By implementing this method, the maximum dimensional difference is decreased from 3.3µm to 0.3µm. Further simulations indicate that higher uniformity is achievable once the field of view on the DMD is divided into smaller subregions.

Single-pulse writing of a concave microlens array.

This work developed a method of femtosecond laser (fs-laser) parallel processing assisted by wet etching to fabricate 3D micro-optical components. A 2D fs-laser spot array with designed spatial distribution was generated by a spatial light modulator. A single-pulse exposure of the entire array was used for parallel processing. By subsequent wet etching, a close-packed hexagonal arrangement, 3D concave microlens array on a curved surface with a radius of approximately 120 µm was fabricated, each unit lens of which has designable spatial distribution. Characterization of imaging was carried out by a microscope and showed a unique imaging property in multi-planes. This method provides a parallel and efficient technique to fabricate 3D micro-optical devices for applications in optofluidics, optical communication, and integrated optics.

A Hybrid Fault Diagnosis Approach for Rotating Machinery with the Fusion of Entropy-Based Feature Extraction and SVM Optimized by a Chaos Quantum Sine Cosine Algorithm.

As crucial equipment during industrial manufacture, the health status of rotating machinery affects the production efficiency and device safety. Hence, it is of great significance to diagnose rotating machinery faults, which can contribute to guarantee the running stability and plan for maintenance, thus promoting production efficiency and economic benefits. For this purpose, a hybrid fault diagnosis model with entropy-based feature extraction and SVM optimized by a chaos quantum sine cosine algorithm (CQSCA) is developed in this research. Firstly, the state-of-the-art variational mode decomposition (VMD) is utilized to decompose the vibration signals into sets of components, during which process the preset parameter K is confirmed with the central frequency observation method. Subsequently, the permutation entropy values of all components are computed to constitute the feature vectors corresponding to different kind of signals. Later, the newly developed sine cosine algorithm (SCA) is employed and improved with chaotic initialization by a Duffing system and quantum technique to optimize the support vector machine (SVM) model, with which the fault pattern is recognized. Additionally, the availability of the optimized SVM with CQSCA was revealed in pattern recognition experiments. Finally, the proposed hybrid fault diagnosis approach was employed for engineering applications as well as contrastive analysis. The comparative results show that the proposed method achieved the best training accuracy 99.5% and best testing accuracy 97.89%. Furthermore, it can be concluded from the boxplots of different diagnosis methods that the stability and precision of the proposed method is superior to those of others.

Cyclopentene Annulations of Alkene Radical Cations with Vinyl Diazo Species Using Photocatalysis.

A direct (3+2) cycloaddition between alkenes and vinyl diazo reagents using either Cr or Ru photocatalysis is described. The intermediacy of a radical cation species enables a nucleophilic interception by vinyl diazo compounds, a departure from their traditional electrophilic behavior. A variety of cyclopentenes are synthesized using this method, and experimental insights implicate a direct cycloaddition instead of a cyclopropanation/rearrangement process.

Nano-ablation of silica by plasmonic surface wave at low fluence.

Formation of ripples by ablation of surfaces of laser-irradiated materials is an example of ultrafast energy delivery. Herein, we report on fs-laser optical imprinting of periodic nano-grooves on silica substrate at only 25% of the laser ablation threshold via an interface plasmonic light localization at the ZnS film (top) interface with silica (bottom) by plasmonic surface wave. The nano-grooves were formed throughout ZnS with the same period and orientation imprinted onto the underlying silica. Based on a detailed account of the multi-photon and avalanche ionization using the Drude model, laser-induced plasmonic ablation describes quantitatively the energy deposition from the top ZnS to the substrate of silica.

Multilevel phase-type diffractive lens embedded in sapphire.

Herein, we report a kinoform phase-type lens (KPL), which is fabricated by femtosecond (fs)-laser-induced refractive index change inside sapphire crystal. By fabricating volume phase gratings in sapphire and measuring the energy ratio of the grating's first and second diffraction orders, the refractive index change in sapphire induced by fs-laser modification was obtained. Then a four-level KPL was designed and fabricated inside sapphire following the experimentally established scaling of the refractive index change and fs-laser power. Importantly, the KPL has unique UV focusing and imaging capability as well as a stable optical performance in different refractive index environments. The KPL embedded in sapphire has the same optical performance after a high-temperature (1050°C) annealing for 30 min. The KPLs in sapphire have great potential to increase light extraction efficiency in GaN blue-UV light-emitting diodes and can be used in micro-optical sensor applications in chemically harsh and high-temperature environments.

Fabrication of an anti-reflective microstructure on sapphire by femtosecond laser direct writing.

Herein, we report a facile approach for the maskless production of subwavelength-structured antireflective surfaces on sapphire with high and broadband transmittance in the mid-IR: femtosecond laser direct writing assist with wet etching. With this method, inverted pyramid and cone arrays with a pitch of about 2 µm and a total height of near 900 nm on the sapphire were produced. The resulting subwavelength structures greatly suppress specular reflection at normal incidence. The transmission measurements between 3 and 5 µm are in agreement with the simulations performed using VirtualLab, and the transmittance reached a maximum value of 92.5% at 4 µm. The sapphire with subwavelength structures also exhibits angle-independent transmittance characteristics up to a high θ=60°. Therefore, these subwavelength structures on sapphire are of great technological importance in mid-IR optics, especially for the harsh-condition-applicable windows of military mid-IR devices.

Meta-Selective C-H Arylation of Aromatic Alcohols with a Readily Attachable and Cleavable Molecular Scaffold.

The first example of meta-selective C-H arylations of arene alcohol-based substrates is described. The strategy involves the combination of the transient norbornene strategy with the quinoline-based acetal scaffold to achieve the formation of biaryl compounds. Both a two-step meta-arylation/scaffold cleavage process and a total telescoping procedure are described, highlighting the convenient attributes of attachment, removal, and recovery of the acetal scaffold. Moreover, the meta-arylated compounds can be further derivatized via ortho-selective functionalizations. These processes establish a foundation for catalytic polyfunctionalization of alcohol-based compounds.

Will stem cells bring hope to pathological skin scar treatment?

Pathological skin scars, such as keloids, aesthetically and psychosocially affect patients. The quest for scar reduction and the increasing recognition of patient satisfaction has led to the continued exploration of scar treatment. Stem cells are a promising source for tissue repair and regeneration. The multi-potency and secretory functions of these cells could offer possible treatments for pathological scars and have been examined in recent studies. Here, we analyze the factors that influence the formation of pathological skin scars, summarize recent research on pathological scar treatment with stem cells and elaborate on the possible mechanisms of this treatment. Additionally, other effects of stem cell treatments are also presented while evaluating potential side effects of stem cell-based pathological scar treatments. Thus, this review may provide meaningful guidance in the clinic for scar treatments with stem cells.

Palladium(II)-Catalyzed ortho-Arylation of Aromatic Alcohols with a Readily Attachable and Cleavable Molecular Scaffold.

A palladium(II)-catalyzed C-H arylation process of alcohols has been developed. The strategy utilizes a novel quinoline-based hemiacetal scaffold that can direct the selective C-H bond functionalization. This reaction provides a useful method to construct biaryl compounds of benzyl alcohols in good to excellent yields. The new molecular scaffold can be readily attached, removed, and recovered.

Genome-wide screen for serum microRNA expression profile in mfat-1 transgenic mice.

n-3 Polyunsaturated fatty acids (n-3 PUFAs) contribute to preventing many types of diseases, including cancer; however, a high n-6 polyunsaturated fatty acids (n-6 PUFAs) intake in modern diets has the opposite effect. Previously, we developed a transgenic mouse model that expresses a gene, fat-1, encoding an n-3 fatty acid desaturase, which converts n-6 PUFAs to n-3 PUFAs in vivo. MicroRNAs (miRNAs) in serum are stable, reproducible, and consistent among individuals of the same species and serve as potential biomarkers for the detection of cancers and other diseases. Employing illumina sequencing, we analyzed all the serum miRNAs in wild-type and mfat-1 transgenic mice. Using quantitative real-time PCR (RT-qPCR), we identified 12 miRNAs that were highly expressed in mfat-1 mice. Pathway analysis of targets regulated by these miRNAs revealed a significant number of genes involved in the development of cancer, including phosphatidylinositol 3-kinase (PI3K), mitogen-activated protein kinases (MAPK), and mammalian target of rapamycin (mTOR), which suggested a relationship between n-3 PUFAs and cancer prevention.

Palladium-catalyzed asymmetric amination of allenyl phosphates: enantioselective synthesis of allenes with an additional unsaturated unit.

A highly enantioselective Pd-catalyzed amination of allenyl phosphates generating 2,3-allenyl amines with central chirality has been developed. Under the optimized conditions, chiral 2,3-allenyl amines with or without (an) additional C-C double or triple bond(s) have been prepared at 0 °C with up to 90% yield and 94% ee by identifying (R)-3,4,5-(MeO)3-MeOBIPHEP as the ligand.

Unlocking the potential of senescence-related gene signature as a diagnostic and prognostic biomarker in sepsis: insights from meta-analyses, single-cell RNA sequencing, and in vitro experiments.

Cellular senescence is closely associated with the pathogenesis of sepsis. However, the diagnostic and prognostic value of senescence-related genes remain unclear. In this study, 866 senescence-related genes were collected from CellAge. The training cohort, GSE65682, which included 42 control and 760 sepsis samples, was obtained from the Gene Expression Omnibus (GEO). Feature selection was performed using gene expression difference detection, LASSO analysis, random forest, and Cox regression. TGFBI and MAD1L1 were ultimately selected for inclusion in the multivariate Cox regression model. Clustering based on the expressions of TGFBI and MAD1L1 was significantly associated with sepsis characteristics and prognoses (all P < 0.05). The risk signature served as a reliable prognostic predictor across the GSE65682, GSE95233, and GSE4607 cohorts (pooled hazard ratio = 4.27; 95% confidence interval [CI] = 1.63-11.17). Furthermore, it also served as a robust classifier to distinguish sepsis samples from control cases across 14 cohorts (pooled odds ratio = 5.88; 95% CI = 3.54-9.77). Single-cell RNA sequencing analyses from five healthy controls and four sepsis subjects indicated that the risk signature could reflect the senescence statuses of monocytes and B cells; this finding was then experimentally validated in THP-1 and IM-9 cells in vitro (both P < 0.05). In all, a senescence-related gene signature was developed as a prognostic and diagnostic biomarker for sepsis, providing cut-in points to uncover underlying mechanisms and a promising clinical tool to support precision medicine.