Enhancing Triplet-Triplet Annihilation Upconversion of Pyrene Derivatives for Photoredox Catalysis via Molecular Engineering.

Triplet-triplet annihilation upconversion (TTA-UC) has the potential to enhance photoredox catalysis yield. It includes a sensitizer and an annihilator. Efficient and stable annihilators are essential for photoredox catalysis, yet only a few examples are reported. Herein, we designed four novel pyrene annihilators (1, 2, 3 and 4) via introducing aryl-alkynyl groups onto pyrene to systematically modulate their singlet and triplet energies. Coupled with platinum octaethylporphyrin (PtOEP), the TTA-UC efficiency is enhanced gradually as the number of aryl-alkynyl group increases. When combining 4 with palladium tetraphenyl-tetrabenzoporphyrin (PdTPTBP), we achieved the highest red-to-green upconversion efficiency (22.4±0.3 %) (out of a 50 % maximum) so far. Then, this pair was used to activate photooxidation of aryl boronic acid under red light (630 nm), which achieved a great improved reaction yield compared to that activated by green light directly. The results not only provide a design strategy for efficient annihilators, but also show the advantage of applying TTA-UC into improving the photoredox catalysis yield.

Supplementation with carnosine, a food-derived bioactive dipeptide, alleviates dexamethasone-induced oxidative stress and bone impairment via the NRF2 signaling pathway.

BACKGROUND: Carnosine, a natural bioactive dipeptide derived from meat muscle, possesses strong antioxidant properties. Dexamethasone, widely employed for treating various inflammatory diseases, raises concerns regarding its detrimental effects on bone health. This study aimed to investigate the protective effects of carnosine against dexamethasone-induced oxidative stress and bone impairment, along with its underlying mechanisms, utilizing chick embryos and a zebrafish model in vivo, as well as MC3T3-E1 cells in vitro. RESULTS: Our findings revealed that carnosine effectively mitigated bone injury in dexamethasone-exposed chick embryos, accompanied by reduced oxidative stress. Further investigation demonstrated that carnosine alleviated impaired osteoblastic differentiation in MC3T3-E1 cells and zebrafish by suppressing the excessive production of reactive oxygen species (ROS) and enhancing the activity of antioxidant enzymes such as superoxide dismutase (SOD) and glutathione peroxidase (GPX). Moreover, mechanistic studies elucidated that carnosine promoted the expression and nuclear translocation of nuclear factor erythroid 2-related factor 2 (NRF2), thereby facilitating the transcription of its downstream antioxidant response elements, including heme oxyense-1 (HO-1), glutamate cysteine ligase modifier (GCLM), and glutamate cysteine ligase catalytic (GCLC) to counteract dexamethasone-induced oxidative stress. CONCLUSION: Overall, this study underscores the potential therapeutic efficacy of carnosine in mitigating oxidative stress and bone damage induced by dexamethasone exposure, shedding light on its underlying mechanism of action by activating the NRF2 signaling pathway. © 2024 Society of Chemical Industry.

Atomically Dispersed Ni-N4 Sites Assist Pt3 Ni Nanocages with Pt Skin to Synergistically Enhance Oxygen Reduction Activity and Stability.

Currently, the rarity and high cost of platinum (Pt)-based electrocatalysts seriously limit their commercial application in fuel cells cathode. Decorating Pt with atomically dispersed metal-nitrogen sites possibly offers an effective pathway to synergy tailor their catalytic activity and stability. Here active and stable oxygen reduction reaction (ORR) electrocatalysts (Pt3 Ni@Ni-N4 -C) by in situ loading Pt3 Ni nanocages with Pt skin on single-atom nickel-nitrogen (Ni-N4 ) embedded carbon supports are designed and constructed. The Pt3 Ni@Ni-N4 -C exhibits excellent mass activity (MA) of 1.92 A mgPt -1 and specific activity of 2.65 mA cmPt -2 , together with superior durability of 10 mV decay in half-wave potential and only 2.1% loss in MA after 30 000 cycles. Theoretical calculations demonstrate that Ni-N4 sites significant redistribute of electrons and make them transfer from both the adjacent carbon and Pt atoms to the Ni-N4 . The resultant electron accumulation region successfully anchored Pt3 Ni, that not only improves structural stability of the Pt3 Ni, but importantly makes the surface Pt more positive to weaken the adsorption of *OH to enhance ORR activity. This strategy lays the groundwork for the development of super effective and durable Pt-based ORR catalysts.

Potential of Tamarind Shell Extract against Oxidative Stress In Vivo and In Vitro.

Tamarind shell is rich in flavonoids and exhibits good biological activities. In this study, we aimed to analyze the chemical composition of tamarind shell extract (TSE), and to investigate antioxidant capacity of TSE in vitro and in vivo. The tamarind shells were extracted with 95% ethanol refluxing extraction, and chemical constituents were determined by ultra-performance chromatography-electrospray tandem mass spectrometry (UPLC-MS/MS). The free radical scavenging activity of TSE in vitro was evaluated using the oxygen radical absorbance capacity (ORAC) method. The antioxidative effects of TSE were further assessed in 2,2-azobis (2-amidinopropane) dihydrochloride (AAPH)-stimulated ADTC5 cells and tert-butyl hydroperoxide (t-BHP)-exposed zebrafish. A total of eight flavonoids were detected in TSE, including (+)-catechin, taxifolin, myricetin, eriodictyol, luteolin, morin, apigenin, and naringenin, with the contents of 5.287, 8.419, 4.042, 6.583, 3.421, 4.651, 0.2027, and 0.6234 mg/g, respectively. The ORAC assay revealed TSE and these flavonoids had strong free radical scavenging activity in vitro. In addition, TSE significantly decreased the ROS and MDA levels but restored the SOD activity in AAPH-treated ATDC5 cells and t-BHP-exposed zebrafish. The flavonoids also showed excellent antioxidative activities against oxidative damage in ATDC5 cells and zebrafish. Overall, the study suggests the free radical scavenging capacity and antioxidant potential of TSE and its primary flavonoids in vitro and in vivo and will provide a theoretical basis for the development and utilization of tamarind shell.

Effects of the Separation Distance between Two Triplet States Produced from Intramolecular Singlet Fission on the Two-Electron-Transfer Process.

To harvest two triplet excitons of singlet fission (SF) via a two-electron transfer efficiently, the revelation of the key factors that influence the two-electron-transfer process is necessary. Here, by using steady-state and transient absorption/fluorescence spectroscopy, we investigated the two-electron-transfer process from the two triplet excitons of intramolecular SF (iSF) in a series of tetracene oligomers (dimer, trimer, and tetramer) with 7,7,8,8-tetracyanoquinodimethane (TCNQ) as an electron acceptor in solution. Quantitative two-electron transfer could be conducted for the trimer and tetramer, and the rate for the tetramer is faster than that for the trimer. However, the maximum efficiency of the two-electron transfer in the dimer is relatively low (∼47%). The calculation result of the free energy change (ΔG) of the second-electron transfer for these three compounds (-0.024, -0.061, and -0.074 eV for the dimer, trimer, and tetramer, respectively) is consistent with the experimental observation. The much closer ΔG value to zero for the dimer should be responsible for its low efficiency of the two-electron transfer. Different ΔG values for these three oligomers are attributed to the different Coulomb repulsive energies between the two positive charges generated after the two-electron transfer that is caused by their various intertriplet distances. This result reveals for the first time the important effect of the Coulomb repulsive energy, which depends on the intertriplet distance, on the two-electron transfer process from the two triplet excitons of iSF.

Embedding SnO2 Thin Shell Protected Ag Nanowires in SnO2 ETL to Enhance the Performance of Perovskite Solar Cells.

The energy level mismatching between SnO2 and perovskite and the nonradiative recombination at SnO2-perovskite interface severely degrade the extraction of carriers, reducing the power conversion efficiency (PCE) and stability of planar perovskite solar cells (PSCs) based on SnO2 electron transfer layer (ETL). In the present work, a reinforced SnO2 ETL was successfully developed by embedding SnO2 thin shell protected Ag nanowires (Ag/SnO2 NWs) in traditional planar SnO2 film, which was proved to not only lower the conduction band of SnO2 to adjust the energy level matching, but also significantly reduce the interfacial carrier recombination. Moreover, Ag/SnO2 NWs improved the electrical conductivity of SnO2 ETL, and effectively promoted carrier transport. Benefiting from the use of Ag/SnO2 NWs, our newly designed PSC achieved a significantly increased champion PCE of 19.78%, which is 7% higher than the traditional PSC without Ag/SnO2 NWs embedding, indicating its great application potential in PSCs.

Robust Biological Hydrogen-Bonded Organic Framework with Post-Functionalized Rhenium(I) Sites for Efficient Heterogeneous Visible-Light-Driven CO2 Reduction.

A robust 2,2'-bipyridine (bpy)-derived biological hydrogen-bonded framework (HOF-25) has been realized depending on guanine-quadruplex with the assistance of π-π interaction, which reacts with Re(CO)5 Cl to give a post-functionalized HOF-25-Re. X-ray absorption fine structure spectroscopic study on HOF-25-Re confirms the covalent attachment of Re(bpy)(CO)3 Cl segments to this HOF. Robust and recycled HOF-25-Re bearing photocatalytic Re(bpy)(CO)3 Cl centers displays good heterogeneous catalytic activity towards carbon dioxide photoreduction in the presence of [Ru(bpy)3 ]Cl2 and triisopropanolamine in CH3 CN under visible-light irradiation, with both high CO production rate of 1448 µmol g-1 h-1 and high selectivity of 93 %. Under the same conditions, the experimental turnover number of HOF-25-Re (50) is about 8 times as that of the homogeneous control Re(bpy)(CO)3 Cl. The sustainably regenerated HOF-25-Re via crystallization and post-modification processes shows recovered photocatalytic performance.

Study on the Ultrafast Process of Perovskite Nanoparticles Modified by Different Alkyl Chains.

Three kinds of perovskite nanoparticles encapsulated with different chain lengths of alkylammonium, (CH3NH3)x(CH3(CH2)3NH3)(1-x)PbBr3 (NP-C4), (CH3NH3)x(CH3(CH2)7NH3)(1-x)PbBr3 (NP-C8), and (CH3NH3)x(CH3(CH2)11NH3)(1-x)PbBr3 (NP-C12), are successfully prepared. X-ray powder diffraction experiments demonstrate that these three nanoparticles are all pure cubic phase. However, the compositions of these three nanoparticles are significantly different, as revealed by steady-state absorption spectra. NP-C4 mainly consists of 2D perovskite with m (number of unit cell layers) = 1 and 3D perovskite. Instead, NP-C8 and NP-C12 are mainly composed of 2D perovskite with m = 3, 4, and 5. Time-resolved fluorescence spectra and femtosecond transient absorption spectra suggest the presence of energy transfer from 2D perovskite to 3D perovskite in these three nanoparticles. More importantly, the energy-transfer rate gradually decreases from NP-C4 to NP-C12. This result suggests that the composition of perovskite nanoparticles and their corresponding photophysical properties can be controlled by the chain length of alkylammonium. This provides a new insight for preparing novel perovskite nanoparticles for special applications.

Evaluation of Fused Aromatic-Substituted Diketopyrrolopyrrole Derivatives for Singlet Fission Sensitizers.

Singlet fission (SF) is a spin-allowed carrier multiplication process that has potential to overcome the Shockley-Queisser limit of solar energy conversion efficiency for single-junction solar cells. It is of importance to prescreen appropriate SF candidates for both basic research and practical applications of SF. Besides common polycyclic aromatic hydrocarbons (PAHs), diketopyrrolopyrrole (DPP) derivatives also undergo efficient SF. A series of DPP derivatives with fused aromatic substituents were investigated considering their conjugation length, constitution, and the introduction of terminal substituents. A comparison of SF properties between nonfused and fused aromatic-substituted DPP derivatives was carried out. Detailed analysis focused on elucidating the relationship between the frontier molecular orbital energies, multiple diradical characters, and SF-relevant excited-state energy levels. Compared to nonfused aromatic-substituted DPP derivatives, fused aromatic-substituted DPP derivatives which contain three aromatic units (thiophene or furan) still share more appropriate energy levels for SF sensitizers. Changing the five-membered aromatic units with benzene ring and introducing -F, -OMe, and -COOH as terminal substituents are both effective ways to improve their performance as SF sensitizers. The results of this research help us to understand the SF properties of DPP derivatives deeply and are beneficial for the design of new DPP-based SF sensitizers.

Strong Visible-Light-Absorbing Cuprous Sensitizers for Dramatically Boosting Photocatalysis.

Developing strong visible-light-absorbing (SVLA) earth-abundant photosensitizers (PSs) for significantly improving the utilization of solar energy is highly desirable, yet it remains a great challenge. Herein, we adopt a through-bond energy transfer (TBET) strategy by bridging boron dipyrromethene (Bodipy) and a CuI complex with an electronically conjugated bridge, resulting in the first SVLA CuI PSs (Cu-2 and Cu-3). Cu-3 has an extremely high molar extinction coefficient of 162 260 m-1 cm-1 at 518 nm, over 62 times higher than that of traditional CuI PS (Cu-1). The photooxidation activity of Cu-3 is much greater than that of Cu-1 and noble-metal PSs (Ru(bpy)3 2+ and Ir(ppy)3 + ) for both energy- and electron-transfer reactions. Femto- and nanosecond transient absorption and theoretical investigations demonstrate that a "ping-pong" energy-transfer process in Cu-3 involving a forward singlet TBET from Bodipy to the CuI complex and a backward triplet-triplet energy transfer greatly contribute to the long-lived and Bodipy-localized triplet excited state.

Toward ultrasensitive and fast colorimetric detection of indoor formaldehyde across the visible region using cetyltrimethylammonium chloride-capped bone-shaped gold nanorods as "chromophores".

Plasmonic nanostructures have been broadly used for chemical detections, but their applications are limited by slow detection rates, insufficient visual resolution and sensitivity due to the chemical and structural stability of conventional plasmonic nanomaterials. It is thus essential to develop strategies to enhance the detection kinetics while promoting their excellent plasmonic properties. In this work, a colorimetric assay for HCHO measurement is developed based on the fact that HCHO can react with Tollens' reagent to anisotropically deposit a layer of silver shells onto the bone-shaped gold nanorod (Au NR) cores. Compared to the routine rod-shaped Au NRs, the bone-shaped Au NRs facilitate the deposition of Ag onto the sunken section due to their unique concave structures, giving rise to fast reaction kinetics and detection rate. It is also important to point out that the surface ligand exchange from CTAB to CTAC is helpful to accelerate the deposition of silver onto Au NRs, which significantly shortens the reaction time. The preferential deposition of Ag on the concave Au NRs induces more dramatic morphology changes and therefore promotes the plasmonic shift of the bone-shaped Au NRs and improves the sensing efficiency. Correspondingly, the apparent color of the solution changes from light gray to dark blue, purple, red, orange and finally to yellow as the longitudinal localized surface plasmon resonance (LSPR) band shifts from 710 to 500 nm along with the emergence of a new LSPR band at 400 nm almost covering the full visible region. The colorimetric method developed enables sensitive detection of HCHO with a low detection limit (1 nM), wide linear range (0.1-50 µM), high visual resolution and good specificity against other common indoor gases. It was successfully applied to the detection of gaseous HCHO present in the air collected from a furniture plaza, showing its potential practicality for on-site HCHO analysis.

Surface Modification of Methylamine Lead Halide Perovskite with Aliphatic Amine Hydroiodide.

By spin-coating method, a thin layer of dodecylamine hydroiodide (DAHI) is introduced to the surface of perovskite CH3NH3PbI xCl3- x. This layer of DAHI successfully changes the surface of perovskite from hydrophilic to hydrophobic as revealed by the water contact angle measurement. Significantly enhanced fluorescence intensity and prolonged fluorescence lifetime are found for these modified films in comparison to those of unmodified perovskite films, suggesting that the number of structure defects is reduced dramatically. The compatibility between the perovskite and hole transfer layer (HTL) is also improved, which leads to more efficient hole collection from the perovskite layer by HTL as revealed by the fluorescence spectra, fluorescence decay dynamics, as well as the transient photocurrent measurements. Moreover, the perovskite solar cells (PSCs) fabricated from these modified perovskite films exhibit significantly improved humidity stability as well as promoted photoelectron conversion efficiency (PCE). The result of this research reveals for the first time that the layer of aliphatic amino hydroiodide is a multiple functions layer, which can not only improve the humidity stability but also promote the performance of PSCs by reducing the defect number and improve the compatibility between perovskite and HTL. Because the structure of aliphatic amines can be functionalized with myriad of other groups, this perovskite modification method should be very promising in promoting the performance of PSCs.

Tuning the singlet fission relevant energetic levels of quinoidal bithiophene compounds by means of backbone modifications and functional group introduction.

Efficient singlet fission (SF) has been obtained in quinoidal bithiophene, end-capped with dicyanomethylene groups (QBT). However, QBT suffers from low triplet state energy [E(T1)] because of its biradicaloid nature, which results in a great driving force for SF but also a large loss of energy during the SF process. This is not favorable for the application of SF in solar cells. Modifications to the molecular structure of QBT were performed to optimize the SF relevant excited state energy levels and its diradical character in the present study. This includes chalcogen replacement, the fusing of the heterocyclic ring between the two thiophene rings, and the introduction of side substituents. Detailed analysis focused on the correlation between the molecular structure of the QBT derivatives and their diradical character y0, bond length alternation (BLA), molecular orbitals, and SF relevant excited state energy levels. The results show that electron-donating substituents, particularly groups introduced at the inner ß-positions of the thiophene ring, can increase E(T1) and reduce the energy loss of SF significantly under the premise of exothermic SF. These results would be beneficial to the development of new SF candidates for application in solar cells.

Effects of aromatic substituents on the electronic structure and excited state energy levels of diketopyrrolopyrrole derivatives for singlet fission.

Singlet fission (SF) is a spin-allowed process, which is expected to be a feasible strategy to realize photon downward conversion. To achieve a significant increase in the photoelectric conversion efficiency of solar cells, SF molecules should have not only a high SF efficiency, but also suitable energies of the first singlet excited state [E(S1)] and the first triplet excited state [E(T1)] to act as SF sensitizers in solar cells. Aryl-substituted diketopyrrolopyrrole (DPP) is one of the few organic molecules, which can undergo SF efficiently after photoexcitation. In order to find suitable DPP-based SF sensitizers for solar cells, we designed a series of DPP derivatives by varying aromatic substituents, including changing the conjugation and constitution of aromatic substituents, as well as introducing side-substituents on the aromatic substituents. Detailed analysis focused on the molecular structures, the frontier molecular orbitals, multiple diradical characters, and SF relevant excited-state energy levels. The results indicate that introduction of no more than two aromatic rings and modification of the aromatic rings with side-substituents are both practical ways to get suitable SF sensitizers for solar cells. This work would give a deep understanding of DPP-based SF molecules, and pave the way towards the development of new DPP-based SF sensitizers for solar cells.

Intramolecular singlet fission in a face-to-face stacked tetracene trimer.

A covalently linked tetracene trimer with a "face-to-face" stacked structure was prepared and its molecular structure is characterized by 1H NMR, MALDI-TOF mass spectroscopy, and elemental analysis. The minimized molecular structure reveals that three tetracene subunits within this trimer adopt a partially "face-to-face" stacked configuration. Its absorption spectrum differs significantly from that of the monomeric and dimeric counterparts in solution due to the strong ground state interactions between the neighboring tetracene subunits. Its fluorescence is almost quenched completely. An ultrafast fluorescence decay component is observed in its fluorescence dynamics, indicating the presence of an ultrafast nonradiative decay channel in the trimer. The nonradiative channel is proved to be intramolecular singlet fission (iSF) by femto-second transient absorption studies. Different from the strongly coupled triplet state observed in the corresponding dimer, weakly coupled triplet states can be formed in this trimer. The triplet quantum yield of trimer 4 can reach up to 126% in solution.

Determination of the Absolute Number Concentration of Nanoparticles and the Active Affinity Sites on Their Surfaces.

Number concentration of nanoparticles is a critical and challenging parameter to be identified. Recently, gravimetric strategy is a fundamental method for absolute quantification, which is widely accepted and used by researchers, yet limited by the inaccuracy in measuring related parameters (e.g, density). Hence, we introduced isopycnic gradient centrifugation to determine the nanopartices' density and improved the current gravimetric method for more accuracy. In this work, polymer nanospheres were used as a model to validate this method. Through isopycnic gradient centrifugation, nanospheres finally reached the zone of equal density as them. By measuring the density of the medium solution in this zone, the nanospheres' density was identified. Then, the density was multiplied by the volume of a single nanosphere characterized by transmission electron microscopy (TEM), and the average weight of a single nanosphere was obtained. Using total weight of the nanospheres divided by the unit weight, their number concentration was quantified. Directly using the real density of the nanoparticles achieved more accurate quantification than the current gravimetric method which used the density of the bulk material counterparts for calculation. Besides, compared with the viscosity/light scattering method and the high-sensitivity flow cytometry (HSFCM) method (another two kinds of typical methods respectively based on light measurements and single particle counting), the improved gravimetric method showed better reproducibility and more convenience. Further, we modified the nanospheres with streptavidin (SA) and antibody, and through biorecognition interaction, we determined the amount of the active affinity sites on each biofunctional nanosphere. Moreover, their bioactivity in different storage conditions was monitored, which showed good stability even in PBS at 4 °C over one year. Our work provided a promising method for more accurately determining the absolute number concentration of nanoparticles and the active affinity sites on their surfaces, which would greatly facilitate their downstream applications.

Surface Decorating of CH3NH3PbBr3 Nanoparticles with the Chemically Adsorbed Perylenetetracarboxylic Diimide.

An organic dye-modified organolead halide CH3NH3PbBr3 nanoparticle (cubic) is prepared successfully by using a perylenetetracarboxylic diimide (PDI) bearing an -NH3(+) headgroup as the capping ligand. The nanopartilces are homogeneous with high crystallinity. The photoluminescence of perovskite is quenched completely by the chemically adsorbed PDI molecules. This efficient fluorescence quenching has confirmed that the PDI molecules are anchored on the surface of CH3NH3PbBr3 nanoparticle. The resulting nanoparticles can be dispersed in organic solvents, and the resulting dispersion remains stable for days. This result provides a general guideline for surface engineering of organolead halide CH3NH3PbBr3 nanoparticles.

Synthesis and photophysical properties of a "face-to-face" stacked tetracene dimer.

A covalently linked tetracene dimer has been prepared and its molecular structure is characterized by (1)H NMR and MALDI-TOF mass spectroscopy, and elemental analysis. The minimized molecular structure reveals that the tetracene subunits in a dimer adopt a "face-to-face" stacked configuration. Its absorption spectrum differs significantly from that of the monomeric counterpart in solution, suggesting the presence of strong interactions between the two tetracene subunits. In solution, the fluorescence spectrum is dominated by a band at around 535 nm, due to an oxidative impurity. In the longer wavelength range, a short-lived lower energy emission can be identified as the intrinsic emission of the dimer. In a polystyrene matrix or at low temperatures, the lifetime of the lower energy emission lengthens and it becomes more prominent. We suggest that the interactions between the two tetracene subunits produce a short-lived, lower energy "excimer-like" state. The fluorescence decays show no observable dependence on an applied magnetic field, and no obvious evidence of significant singlet fission is found in this dimer. This research suggests that even though there are strong electronic interactions between the tetracene subunits in the dimer, singlet fission cannot be achieved efficiently, probably because the formation of "excimer-like" states competes effectively with singlet fission.

Covalently linked perylenetetracarboxylic diimide dimers and trimers with rigid "J-type" aggregation structure.

Covalently linked perylenetetracarboxylic diimide (PDI) dimers (D1 and D2) and trimers (T1 and T2) with slipped "face-to-face" stacked structure are prepared and their molecular structures are characterized by 1H NMR, MALDI-TOF mass spectroscopy and elemental analysis. The rigid molecular structures of these compounds make it easier to establish a direct correlation between the aggregate structure and the photophysical properties. The minimized molecular structures of these compounds reveal that they are all "face-to-face" stacked aggregates with large longitudinal displacement. Their absorption spectra show red-shifted bands, suggesting the presence of "J" type excitonic coupling between the PDI subunits in these compounds. However, their steady state and time resolved fluorescence spectra revealed that the emission from the "excimer-like" states dominates the fluorescence of these compounds, this is similar to that of "H-type" aggregates and may be ascribed to the "face-to-face" stacked structure. In the fluorescence spectra of these compounds, a minor "J-type" emission can be identified for the compounds with a relatively large longitudinal displacement. An increase in the number of subunits in one aggregate from 2 to 3 also brings about distinctive changes in their photophysical properties, which can be ascribed to the changes in the stacking structure caused by the steric hindrance.

Effects of heteroatoms of tetracene and pentacene derivatives on their stability and singlet fission.

The effects of the introduction of an sp(2)-hybridized nitrogen atom (═N-) and thiophene ring on the structure geometries, frontier molecular orbital energies, and excited state energies related to singlet fission (SF) for some tetracene and pentacene derivatives were theoretically investigated by quantum chemical methods. The introduction of a nitrogen atom significantly decreases the energies of frontier molecular orbitals and hence improves their stabilities in air and light illumination. More importantly, it is helpful for reducing the energy loss of the exothermic singlet fission of pentacene derivatives. For fused benzene-thiophene structures, the (α, ß) connection pattern could stabilize the frontier molecular orbitals, while the (ß, ß) connection pattern can promote the thermodynamic driving force of singlet fission. These facts provide a theoretical ground for rational design of SF materials.