RESUMEN
BACKGROUND: Porous cages are considered a promising alternative to high-density cages because their interconnectivity favours bony ingrowth and appropriate stiffness tuning reduces stress shielding and the risk of cage subsidence. METHODS: This study proposes three approaches that combine macroscopic topology optimization and micropore design to establish three new types of porous cages by integrating lattices (gyroid, Schwarz, body-centred cubic) with the optimized cage frame. Using these three porous cages along with traditional high-density cages, four ACDF surgical models were developed to compare the mechanical properties of facet articular cartilage, discs, cortical bone, and cages under specific loads. RESULTS: The facet joints in the porous cage groups had lower contact forces than those in the high-density cage group. The intervertebral discs in all models experienced maximum stress at the C5/6 segment. The stress distribution on the cortical bone surface was more uniform in the porous cage groups, leading to increased average stress values. The gyroid, Schwarz, and BCC cage groups showed higher average stress on the C5 cortical bone. The average stress on the surface of porous cages was higher than that on the surface of high-density cages, with the greatest difference observed under the lateral bending condition. The BCC cage demonstrated favourable mechanical stability. CONCLUSION: The new porous cervical cages satifies requirements of low rigidity and serve as a favourable biological scaffold for bone ingrowth. This study provides valuable insights for the development of next-generation orthopaedic medical devices.
Asunto(s)
Disco Intervertebral , Enfermedades de la Columna Vertebral , Fusión Vertebral , Humanos , Porosidad , Análisis de Elementos Finitos , Disco Intervertebral/cirugía , Fenómenos Biomecánicos , Vértebras Cervicales/cirugíaRESUMEN
BACKGROUND: The adverse consequences of medial meniscus posterior root tears have become increasingly familiar to surgeons, and treatment strategies have become increasingly abundant. In this paper, the finite element gait analysis method was used to explore the differences in the biomechanical characteristics of the knee joint under different conditions. METHODS: Based on CT computed tomography and MR images, (I) an intact knee (IK) model with bone, cartilage, meniscus and main ligaments was established. Based on this model, the posterior root of the medial meniscus was resected, and (ii) the partial tear (PT) model, (iii) the entire radial tear (ERT) model, and (iv) the entire oblique tear (EOT) model were established according to the scope and degree of resection. Then, the (v) meniscus repair (MR) model and (vi) partial meniscectomy (PM) model were developed according to the operation method. The differences in stress, displacement and contact area among different models were evaluated under ISO gait loading conditions. RESULTS: Under gait loading, there was no significant difference in the maximum stress of the medial and lateral tibiofemoral joints among the six models. Compared with the medial tibiofemoral joint stress of the IK model, the stress of the PM model increased by 8.3%, while that of the MR model decreased by 18.9%; at the same time, the contact stress of the medial tibiofemoral joint of the ERT and EOT models increased by 17.9 and 25.3%, respectively. The displacement of the medial meniscus in the ERT and EOT models was significantly larger than that in the IK model (P < 0.05), and the tibial and femoral contact areas of these two models were lower than those of the IK model (P < 0.05). CONCLUSIONS: The integrity of the posterior root of the medial meniscus plays an important role in maintaining normal tibial-femoral joint contact mechanics. Partial meniscectomy is not beneficial for improving the tibial-thigh contact situation. Meniscal repair has a positive effect on restoring the normal biomechanical properties of the medial meniscus.
Asunto(s)
Enfermedades de los Cartílagos , Traumatismos de la Rodilla , Lesiones de Menisco Tibial , Humanos , Lesiones de Menisco Tibial/diagnóstico por imagen , Lesiones de Menisco Tibial/cirugía , Análisis de Elementos Finitos , Fenómenos Biomecánicos , Traumatismos de la Rodilla/diagnóstico por imagen , Traumatismos de la Rodilla/cirugía , Meniscos Tibiales/diagnóstico por imagen , Meniscos Tibiales/cirugía , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugíaRESUMEN
Swine enteric coronavirus (SeCoV) causes acute gastroenteritis and high mortality in newborn piglets. Since the last century, porcine transmissible gastroenteritis virus (TGEV) and porcine epidemic diarrhea virus (PEDV) have swept farms all over the world and caused substantial economic losses. In recent years, porcine delta coronavirus (PDCoV) and swine acute diarrhea syndrome coronavirus (SADS-CoV) have been emerging SeCoVs. Some of them even spread across species, which made the epidemic situation of SeCoV more complex and changeable. Recent studies have begun to reveal the complex SeCoV-host interaction mechanism in detail. This review summarizes the current advances in autophagy, apoptosis, and innate immunity induced by SeCoV infection. These complex interactions may be directly involved in viral replication or the alteration of some signal pathways.
Asunto(s)
Infecciones por Coronavirus , Coronavirus , Virus de la Diarrea Epidémica Porcina , Enfermedades de los Porcinos , Alphacoronavirus , Animales , Interacciones Huésped-Patógeno , PorcinosRESUMEN
Endoplasmic reticulum-associated degradation (ERAD) is highly conserved in yeast. Recent studies have shown that ERAD is also ubiquitous and highly conserved in eukaryotic cells, where it plays an essential role in maintaining endoplasmic reticulum (ER) homeostasis. Misfolded or unfolded proteins undergo ERAD. They are recognized in the ER, retrotranslocated into the cytoplasm, and degraded by proteasomes after polyubiquitin. This may consist of several main steps: recognition of ERAD substrates, retrotranslocation, and proteasome degradation. Replication and transmission of the virus in the host is a process of a "game" with the host. It can be assumed that the virus has evolved various mechanisms to use the host's functions for its replication and transmission, including ERAD. However, until now, it is still unclear how the host uses ERAD to deal with virus infection and how the viruses hijack the function of ERAD to obtain a favorable niche or evade the immune clearance of the host. Recent studies have shown that viruses have also evolved mechanisms to use various processes of ERAD to promote their transmission. This review describes the occurrence of ERAD and how the viruses hijack the function of ERAD to spread by affecting the homeostasis and immune response of the host, and we will focus on the role of E3 ubiquitin ligase.
Asunto(s)
Degradación Asociada con el Retículo Endoplásmico , Virus , Retículo Endoplásmico/metabolismo , Poliubiquitina/metabolismo , Complejo de la Endopetidasa Proteasomal/metabolismo , Saccharomyces cerevisiae/metabolismo , Ubiquitina-Proteína Ligasas/metabolismo , Virus/metabolismoRESUMEN
Since the beginning of the 21st century, humans have experienced three coronavirus pandemics, all of which were transmitted to humans via animals. Recent studies have found that porcine deltacoronavirus (PDCoV) can infect humans, so swine enteric coronavirus (SeCoV) may cause harm through cross-species transmission. Transmissible gastroenteritis virus (TGEV) and PDCoV have caused tremendous damage and loss to the pig industry around the world. Therefore, we analyzed the genome sequence data of these two SeCoVs by evolutionary dynamics and phylogeography, revealing the genetic diversity and spatiotemporal distribution characteristics. Maximum likelihood and Bayesian inference analysis showed that TGEV could be divided into two different genotypes, and PDCoV could be divided into four main lineages. Based on the analysis results inferred by phylogeography, we inferred that TGEV might originate from America, PDCoV might originate from Asia, and different migration events had different migration rates. In addition, we also identified positive selection sites of spike protein in TGEV and PDCoV, indicating that the above sites play an essential role in promoting membrane fusion to achieve adaptive evolution. In a word, TGEV and PDCoV are the past and future of SeCoV, and the relatively smooth transmission rate of TGEV and the increasing transmission events of PDCoV are their respective transmission characteristics. Our results provide new insights into the evolutionary characteristics and transmission diversity of these SeCoVs, highlighting the potential for cross-species transmission of SeCoV and the importance of enhanced surveillance and biosecurity measures for SeCoV in the context of the COVID-19 epidemic.
Asunto(s)
COVID-19 , Enfermedades de los Porcinos , Virus de la Gastroenteritis Transmisible , Animales , Teorema de Bayes , Deltacoronavirus , Humanos , Filogeografía , Porcinos , Enfermedades de los Porcinos/epidemiología , Virus de la Gastroenteritis Transmisible/genéticaRESUMEN
Porcine circovirus type 2 (PCV2) is capable of causing porcine circovirus-associated disease (PCVAD) and is one of the major threats to the global pig industry. The nucleocapsid protein Cap encoded by the PCV2 ORF2 gene is an ideal antigen for the development of PCV2 subunit vaccines, and its N-terminal nuclear localization sequence (NLS) structural domain is essential for the formation of self-assembling VLPs. In the present study, we systematically expressed and characterized full-length PCV2 Cap proteins fused to dominant T and B cell antigenic epitopes and porcine-derived CD154 molecules using baculovirus and found that the Cap proteins fusing epitopes were still capable of forming virus-like particles (VLPs). Both piglet and mice experiments showed that the Cap proteins fusing epitopes or paired with the molecular adjuvant CD154 were able to induce higher levels of humoral and cellular responses, particularly the secretion of PCV2-specific IFN-γ and IL-4. In addition, vaccination significantly reduced clinical signs and the viral load of PCV2 in the blood and tissues of challenged piglets. The results of the study provide new ideas for the development of a more efficient, safe and broad-spectrum next-generation PCV2 subunit vaccine.
Asunto(s)
Infecciones por Circoviridae , Circovirus , Vacunas Virales , Animales , Ratones , Porcinos , Circovirus/genética , Epítopos de Linfocito B/metabolismo , Infecciones por Circoviridae/prevención & control , Infecciones por Circoviridae/veterinaria , Proteínas de la Cápside/metabolismo , Anticuerpos Antivirales , Vacunas de SubunidadRESUMEN
In this study, high pressure processing (HPP) and thermal treatment were comparatively evaluated by examining their impacts on the binding behavior and interaction between α-lactalbumin (α-La) and pelargonium-3-glucoside (P3G) under pH values of 6.0, 7.4, and 8.0. The methods of circular dichroism spectroscopy, fluorescence quenching, dynamic light scattering, and molecular simulation were used to characterize the effects of processing-induced changes in protein structure, size distribution, binding site conformation, and residue charges on their binding characteristics between them. The results indicated that the thermal treatments significantly increased the quenching constants of the complex at pH 7.4/8.0 and 60/80 °C, as well as the accessible fraction of protein at pH 8.0/80 °C. Both HPP and thermal treatments increased the random coil content and showed limited effects on the α-helix and ß-sheet contents of α-La and caused the aggregation of the complex to varying degrees. Molecular dynamic simulation and docking analyses revealed that the binding site of the complex did not change under different processing conditions, but the solvent-accessible surface area varied under different conditions.
Asunto(s)
Lactalbúmina , Pelargonium , Dicroismo Circular , Glucósidos , Concentración de Iones de Hidrógeno , Lactalbúmina/química , Espectrometría de FluorescenciaRESUMEN
Bacterial products can stimulate inflammatory reaction and activate immune cells to enhance the production of inflammatory cytokines, and finally promote osteoclasts recruitment and activity, leading to bone destruction. Unfortunately, effective preventive and treatment measures for inflammatory osteolysis are limited and usually confuse the orthopedist. Astragalus polysaccharide (APS), the main extractive of Astragali Radix, has been widely used for treating inflammatory diseases. In the current study, in vitro and in vivo experimental results demonstrated that APS notably inhibited osteoclast formation and differentiation dose-dependently. Moreover, we found that APS down-regulated RANKL-related osteoclastogenesis and levels of osteoclast marker genes, such as NFATC1, TRAP, c-FOS and cathepsin K. Further underlying mechanism investigation revealed that APS attenuated activity of MAPK signalling pathways (eg ERK, JNK and p38) and ROS production induced by RANKL. Additionally, APS was also found to suppress LPS-related inflammatory osteolysis by decreasing inflammatory factors' production in vivo. Overall, our findings demonstrate that APS effectively down-regulates inflammatory osteolysis due to osteoclast differentiation and has the potential to become an effective treatment of the disorders associated with osteoclast.
Asunto(s)
Antiinflamatorios/uso terapéutico , Planta del Astrágalo/química , Sistema de Señalización de MAP Quinasas , Osteoclastos/metabolismo , Osteogénesis , Osteólisis/tratamiento farmacológico , Extractos Vegetales/uso terapéutico , Animales , Catepsina K/metabolismo , Células Cultivadas , Quinasas MAP Reguladas por Señal Extracelular/metabolismo , Lipopolisacáridos/toxicidad , Ratones , Ratones Endogámicos C57BL , Factores de Transcripción NFATC/metabolismo , Osteoclastos/efectos de los fármacos , Osteólisis/etiología , Osteólisis/metabolismo , Extractos Vegetales/farmacología , Polisacáridos/farmacología , Polisacáridos/uso terapéutico , Proteínas Proto-Oncogénicas c-fos/metabolismo , Ligando RANK/metabolismo , Células RAW 264.7 , Especies Reactivas de Oxígeno/metabolismo , Fosfatasa Ácida Tartratorresistente/metabolismo , Proteínas Quinasas p38 Activadas por MitógenosRESUMEN
PURPOSE: To evaluate reserve quadriceps function and improve knee activity in patients with severe knee extension contracture following arthroscopic-assisted mini-incision quadricepsplasty as well as post-operative complications. METHODS: From 2012 to 2019, 32 patients with severe knee extension contractures (less than 45° range of flexion) were treated with an all-arthroscopic release technique. The clinical results, including range of motion (ROM), quadriceps function (quadriceps index, QI), and knee function, were evaluated, and MRI of the healed tendon after partial quadricepsplasty was performed. The patellar track and length during knee flexion were measured on three normal knees under fluoroscopy. Three formalin-fixed lower limbs were used to mimic severely contracted quadriceps to evaluate the extension of the patellar track. RESULTS: The median follow-up time was 2.1 years (1-5 years). The average QI was 92.0 ± 6.2, and the quadriceps muscle strength was increased from 3.28 to 4.72. At the final follow-up, 90% of the patients had no difficulty going upstairs, going downstairs, or rising from a chair. The ROM improved by 25.69 ± 3.6 preoperatively to 105.88 ± 6.6 at the final follow-up (P < 0.001). The open surgery showed that a 2-cm extension could be achieved by partly cutting the quadriceps tendon, and two cuts achieved a total extension of 5.2 ± 0.52 cm. The patellar tracking distance was 7.7 ± 0.43 cm, and the gap between the patella and femur was also reduced. CONCLUSION: Partial quadricepsplasty of the rectus femoris extended the contracted quadriceps and maintained quadriceps strength, allowing for full knee flexion and satisfactory clinical outcomes of knee function with few complications.
Asunto(s)
Contractura , Músculo Cuádriceps , Contractura/etiología , Contractura/cirugía , Humanos , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugía , Músculo Cuádriceps/cirugía , Rango del Movimiento Articular , Resultado del TratamientoRESUMEN
BACKGROUND Bone tissue engineering has been proven to be an appropriate approach for treating bone defects. This study aimed to investigate the effects and mechanism of a composite tissue engineered bone material consisting of bone mesenchymal stem cells (BMSCs), bone morphogenetic protein (BMP9) gene lentiviral vector, and P3HB4HB thermogel (BMSCs-LV-BMP9-P3HB4HB) on calvarial skull defects in rats. MATERIAL AND METHODS LV-BMP9 viral vector was structured and infected to BMSCs-P3HB4HB composite scaffold, which was named as BMSCs-P3HB4HB composite bone repair material. Adipogenic differentiation was determined by oil-red O (ORO) and alkaline phosphatase (ALP) staining. Osteogenic differentiation was measured using Alizarin red staining. Cell viability was examined using Cell-Counting Kit-8 (CCK-8) assay. Protein expression of osteogenic factors, including BMP9, runt-related transcription factor 2 (RUNX2), osteocalcin (OCN), osteopontin (OPN), and osterix (OSX), was detected with Western blot assay and immunohistochemistry. mRNA of these osteogenic factors was examined by RT-PCR. Histological changes were examined with hematoxylin and eosin (H&E) and Masson's trichrome staining. Bone repair was measured using micro-computed tomography (micro-CT). RESULTS BMSCs and LV-BMP9-infected BMSCs demonstrated adipogenic and osteogenic differentiation potential. BMSCs-P3HB4HB scaffold demonstrated good cell-tissue compatibility. BMSCs-LV-BMP9-P3HB4HB exhibited significantly higher osteogenic ability and cell viability of BMSCs compared to BMSCs-LV-P3HB4HB (p<0.05). BMSCs-LV-BMP9-P3HB4HB significantly promoted osteogenic factors (RUNX2, OCN, OPN, and OSX) expression compared to the BMSCs-LV-P3HB4HB group (p<0.05) in both BMSCs and in calvarial defect rats. BMSCs-LV-BMP9-P3HB4HB demonstrated stronger repair ability. BMSCs-LV-BMP9-P3HB4HB significantly alleviated pathological injury and increased collagen fiber production compared to the BMSCs-LV-P3HB4HB group (p<0.05). CONCLUSIONS BMSCs-LV-BMP9-P3HB4HB composite bone repair material can effectively repair injured skull tissues of calvarial defect rats through triggering osteogenic factors expression. The present generated bone repair material may have applications in tissue engineering in regeneration of bone defects.
Asunto(s)
Sustitutos de Huesos , Factor 2 de Diferenciación de Crecimiento/metabolismo , Células Madre Mesenquimatosas , Ingeniería de Tejidos/métodos , Andamios del Tejido , Animales , Regeneración Ósea , Sustitutos de Huesos/química , Geles , Vectores Genéticos , Lentivirus , Osteogénesis , Poliésteres , Ratas , Ratas Sprague-Dawley , Cráneo , Andamios del Tejido/químicaRESUMEN
Silk fibroin (SF) is a fibrous protein with unique mechanical properties, adjustable biodegradation, and the potential to drive differentiation of mesenchymal stem cells (MSCs) along the osteogenic lineage, making SF a promising scaffold material for bone tissue engineering. In this study, hAMSCs were isolated by enzyme digestion and identified by multiple-lineage differentiation. SF scaffold was fabricated by freeze-drying, and the adhesion and proliferation abilities of hAMSCs on scaffolds were determined. Osteoblast differentiation and angiogenesis of hAMSCs on scaffolds were further evaluated, and histological staining of calvarial defects was performed to examine the cocultured scaffolds. We found that hAMSCs expressed the basic surface markers of MSCs. Collagen type I (COL-I) expression was observed on scaffolds cocultured with hAMSCs. The scaffolds potentiated the proliferation of hAMSCs and increased the expression of COL-I in hAMSCs. The scaffolds also enhanced the alkaline phosphatase activity and bone mineralization, and upregulated the expressions of osteogenic-related factors in vitro. The scaffolds also enhanced the angiogenic differentiation of hAMSCs. The cocultured scaffolds increased bone formation in treating critical calvarial defects in mice. This study first demonstrated that the application of 3D SF scaffolds co-cultured with hAMSCs greatly enhanced osteogenic differentiation and angiogenesis of hAMSCs in vitro and in vivo. Thus, 3D SF scaffolds cocultured with hAMSCs may be a better alternative for bone tissue engineering.
Asunto(s)
Amnios/metabolismo , Diferenciación Celular , Fibroínas/química , Ensayo de Materiales , Células Madre Mesenquimatosas/metabolismo , Neovascularización Fisiológica , Osteogénesis , Andamios del Tejido/química , Adulto , Amnios/citología , Femenino , Humanos , Células Madre Mesenquimatosas/citología , EmbarazoRESUMEN
PURPOSE: To evaluate the safety, feasibility, and effectiveness of an all-arthroscopic technique for the intra- and extraarticular release of severe knee extension contractures. METHODS: From 2012 to 2016, 25 patients with severe knee extension contractures (less than 45° range of flexion) were treated with an all-arthroscopic release technique. The patients underwent intra- and extraarticular arthroscopic release and arthroscopic-assisted mini-incision quadriceps plasty. The post-operative rehabilitation was initiated the first day after the procedures. Comprehensive clinical follow-up evaluations including the range-of-motion (ROM) assessment, the Lysholm score, and the International Knee Documentation Committee (IKDC) score were performed on all patients. RESULTS: The median follow-up time was 28 months (range 12-65 months). The ROM improved from 23.9° ± 7.5° pre-operatively to 105.9° ± 6.5° at the final follow-up (P < 0.001). In addition, the Lysholm score increased from 59.9 ± 5.2 pre-operatively to 89.7 ± 3.3 (P < 0.001). The IKDC score increased from 47.6 ± 3.4 pre-operatively to 91.7 ± 2.4 (P < 0.001). All patients were satisfied with their final ROM and functional outcomes. CONCLUSION: The all-arthroscopic release technique was a safe, feasible and effective method for treating severe knee extension contractures. The severe knee extension contractures may be successfully addressed by the all-arthroscopic release technique during our clinical practice. LEVEL OF EVIDENCE: IV.
Asunto(s)
Artroscopía/métodos , Contractura/fisiopatología , Contractura/cirugía , Articulación de la Rodilla/fisiopatología , Articulación de la Rodilla/cirugía , Rango del Movimiento Articular/fisiología , Adolescente , Adulto , Anciano , Estudios de Factibilidad , Femenino , Humanos , Masculino , Persona de Mediana Edad , Músculo Cuádriceps/cirugía , Resultado del Tratamiento , Adulto JovenRESUMEN
Purpose: This study investigates the impact of elastic improvements to the artificial ankle joint insert on prosthesis biomechanics to reduce the risk of prosthesis loosening in TAR patients. Methods: CT data of the right ankle was collected from one elderly female volunteer. An original TAR model (Model A) was developed from CT images and the INBONE II implant system. The development of the new inserts adopts an elastic improvement design approach, where different geometric configurations of flexible layers are inserted into the traditional insert. The structure can be divided into continuous flexible layers and intermittent flexible layers. The flexible layers aim to improve the elasticity of the component by absorbing and dispersing more kinetic energy. The newly designed inserts are used to replace the original insert in Model A, resulting in the development of Models B-D. A finite element model of gait analysis was based by gait parameters. Discrepancies in micromotion and contact behaviour were analysed during the gait cycle, along with interface fretting and articular surface stress at 50% of the gait cycle. Results: In terms of micromotion, the improved elastic models showed reduced micromotion at the tibial-implant interfaces compared to the original model. The peak average micromotion decreased by 12.1%, 13.1%, and 14.5% in Models B, C, and D, respectively. The micromotion distribution also improved in the improved models, especially in Model D. Regarding contact areas, all models showed increased contact areas of articular surfaces with axial load, with Models B, C, and D increasing by 26.8%, 23.9%, and 24.4%, respectively. Contact stress on articular surfaces increased with axial load, reaching peak stress during the late stance phase. Models with continuous flexible layer designs exhibited lower stress levels. The insert and the talar prosthetic articular surfaces showed more uniform stress distribution in the improved models. Conclusion: Improving the elasticity of the insert can enhance component flexibility, absorb impact forces, reduce micromotion, and improve contact behavior. The design scheme of continuous flexible layers is more advantageous in transmitting and dispersing stress, providing reference value for insert improvement.
RESUMEN
OBJECTIVE: Nontraumatic osteonecrosis of the femoral head (ONFH) is commonly encountered in orthopedics. Without early clinical intervention, most patients with peri-collapse of the ONFH will develop femoral head necrosis and eventually require hip replacement surgery. The aim of this study is to evaluate clinical outcomes in patients with ONFH who underwent "light bulb" core decompression (CD) with arthroscopic assistance and to compare them with the outcomes of those treated with traditional procedures. METHODS: A retrospective review of patients with Stage II and IIIA (Peri-collapse) radiographic findings based on the Association Research Circulation Osseous (ARCO) stage for ONFH who underwent "light bulb" CD with or without arthroscopic assistance by a single-surgeon team between March 2014 and December 2018 was performed. All patients were followed up for a minimum of 2 years. The visual analogue scale (VAS) pain score, Harris hip score (HHS), and radiological imaging were evaluated. The categorical parameters were analyzed by chi-square test and the continuous variables conforming to a normal distribution were analyzed by Student's t-test. RESULTS: The study included a total of 39 patients (18 and 21 patients in the with and without arthroscopic assistance groups, respectively), with a mean age of 40.3 years and a mean follow-up of 22.2 months. Overall, there was a better VAS score in the arthroscopic assistance group than in the control group (p < 0.05), There was a significant difference in HHS (80.1 ± 9.2 vs 75.1 ± 12.7) at the last follow-up (p < 0.05). The rate of good and excellent outcomes was 94%. Similarly, there was no significant difference in the total rate of complications or conversion to THA. CONCLUSION: With arthroscopic assistance, "light bulb" CD could be achieved via hip arthroscopy with less trauma, and it offered the opportunity for more precise evaluation and monitoring for therapy and yielded better VAS scores after surgery and better hip function outcomes at the last follow-up.
Asunto(s)
Artroscopía , Descompresión Quirúrgica , Necrosis de la Cabeza Femoral , Humanos , Estudios Retrospectivos , Artroscopía/métodos , Necrosis de la Cabeza Femoral/cirugía , Necrosis de la Cabeza Femoral/diagnóstico por imagen , Femenino , Masculino , Adulto , Descompresión Quirúrgica/métodos , Persona de Mediana Edad , Dimensión del DolorRESUMEN
Developing highland barley products is complex, possibly due to the presence of ß-glucan in highland barley. This study aims to investigate the impact of ß-glucan on the physicochemical properties, microstructure, and molecular interactions of highland barley starch (HBS) during gelatinization and aging. Increasing the ß-glucan content significantly reduced peak viscosity, setback viscosity, and breakdown viscosity, indicating altered gelatinization behavior. The ß-glucan content increase caused a significant drop in peak viscosity. With 20% ß-glucan addition, it reduced by 883 mPa·s, nearly 38%. Rheological analysis showed a transition from a solid-like to a liquid-like texture or quality, ultimately leading to a shear-thinning behavior. Fourier-transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) confirmed the interaction between HBS and ß-glucan via intermolecular hydrogen bonding, promoting the formation of double helical structures in starch. These findings provide a deeper understanding of the role of ß-glucan in the processing of highland barley, highlighting its influence on the starch's properties.
Asunto(s)
Hordeum , Reología , Almidón , beta-Glucanos , Hordeum/química , beta-Glucanos/química , Almidón/química , Viscosidad , Difracción de Rayos X , Espectroscopía Infrarroja por Transformada de Fourier , Enlace de HidrógenoRESUMEN
In the original publication [...].
RESUMEN
The effects of high pressure homogenization (HPH) at different pressures (50, 100, 150 and 200 MPa) and temperatures (4, 20, 40, 60 and 80 °C) on the interaction between corn starch (CS) and cyanidin-3-O-glucoside (C3G) were investigated. Based on analyses of zeta potential, attenuated total reflection-flourier transformed infrared spectroscopy and binding rate after adding shielding agents, the main interaction force changed from electrostatic interaction to hydrogen bonds. In comparison, the interaction between CS and C3G exhibited greater strength at low temperatures and pressures. Especially, 4 °C/50 MPa HPH caused the most significant enhancement in binding rate and binding amount, from 9.56 % to 25.16 % and 0.96 µg/mg CS to 2.52 µg/mg CS, respectively. At this condition, the specific surface area of CS-C3G increased from 433.57 ± 0.91 m2/kg to 440.93 ± 1.01 m2/kg. Surface fluorescence reduction was observed by confocal laser scanning microscopy, further X-ray diffraction patterns indicated the retention of partial spatial structure. Therefore, HPH opened the entry channels, increased contact area and preserved steric hindrance, which increased hydrogen bonding sites. At high temperatures and high pressures (> 40 °C, > 100 MPa), the increasing free starch chains provided new hydrogen bonding sites. Overall, HPH was an effective method to enhance the interaction by affecting starch structure.
Asunto(s)
Almidón , Zea mays , Zea mays/metabolismo , Almidón/química , Temperatura , Antocianinas/química , Glucósidos/químicaRESUMEN
Objective: To discuss the influence of artificial ankle elastic improved inserts (hereinafter referred to as "improved inserts") in reducing prosthesis micromotion and improving joint surface contact mechanics by finite element analysis. Methods: Based on the original insert of INBONE â ¡ implant system (model A), four kinds of improved inserts were constructed by adding arc or platform type flexible layer with thickness of 1.3 or 2.6 mm, respectively. They were Flying goose type_1.3 elastic improved insert (model B), Flying goose type_2.6 elastic improved insert (model C), Platform type_1.3 elastic improved insert (model D), Platform type_2.6 elastic improved insert (model E). Then, the CT data of right ankle at neutral position of a healthy adult male volunteer was collected, and finite element models of total ankle replacement (TAR) was constructed based on model A-E prostheses by software of Mimics 19.0, Geomagic wrap 2017, Creo 6.0, Hypermesh 14.0, and Abaqus 6.14. Finally, the differences of bone-metal prosthesis interface micromotion and articular surface contact behavior between different models were investigated under ISO gait load. Results: The tibia/talus-metal prosthesis interfaces micromotion of the five TAR models gradually increased during the support phase, then gradually fell back after entering the swing phase. The improved models (models B-E) showed lower bone-metal prosthesis interface micromotion when compared with the original model (model A), but there was no significant difference among models A-E ( P>0.05). The maximum micromotion of tibia appeared at the dome of the tibial bone groove, and the ââmicromotion area was the largest in model A and the smallest in model E. The maximum micromotion of talus appeared at the posterior surface of the central bone groove, and there was no difference in the micromotion area among models A-E. The contact area of the articular surface of the insert/talus prosthesis in each group increased in the support phase and decreased in the swing phase during the gait cycle. Compared with model A, the articular surface contact area of models B-E increased, but there was no significant difference among models A-E ( P>0.05). The change trend of the maximum stress on the articular surface of the inserts/talus prosthesis was similar to that of the contact area. Only the maximum contact stress of the insert joint surface of models D and E was lower than that of model A, while the maximum contact stress of the talar prosthesis joint surface of models B-E was lower than that of model A, but there was no significant difference among models A-E ( P>0.05). The high stress area of the lateral articular surface of the improved inserts significantly reduced, and the articular surface stress distribution of the talus prosthesis was more uniform. Conclusion: Adding a flexible layer in the insert can improve the elasticity of the overall component, which is beneficial to absorb the impact force of the artificial ankle joint, thereby reducing interface micromotion and improving contact behavior. The mechanical properties of the inserts designed with the platform type and thicker flexible layer are better.
Asunto(s)
Tobillo , Astrágalo , Adulto , Masculino , Humanos , Articulación del Tobillo/cirugía , Análisis de Elementos Finitos , Tibia/cirugía , Estrés Mecánico , Fenómenos BiomecánicosRESUMEN
Background: Bone bruises are frequently found on magnetic resonance imaging (MRI) after an anterior cruciate ligament (ACL) tear in pediatric patients. Purpose: To establish a classification system for different bone bruise patterns to estimate the severity of a knee injury in pediatric patients with ACL tears. Study Design: Cross-sectional study; Level of evidence, 3. Methods: A medical database was retrospectively reviewed to identify all cases of primary ACL tears in patients who were aged ≤17 years at the time of the injury and underwent MRI at our institution within 4 weeks of the injury between January 2011 and December 2020. A total of 188 patients were identified (67 male, 121 female; mean age, 15.1 ± 1.4 years). Bone bruises were classified according to their depth and location on MRI in the sagittal and coronal planes. Results: The new classification system identified 3 grades of depth: grade I, the bone bruise was located within the epiphysis but did not reach the epiphyseal plate (n = 54 [35.3%]); grade II, the bone bruise was within the epiphysis that reached the epiphyseal plate (n = 55 [35.9%]); and grade III, the bone bruise was in both the epiphysis and metaphysis (n = 44 [28.8%]). The bone bruise location was classified into 4 types: type a, the deepest bone bruise area was in the lateral tibial plateau (n = 66 [43.1%]); type b, the deepest bone bruise area was in the lateral femoral condyle, commonly occurring in the lateral one-third to two-thirds of the lateral femoral condyle (n = 22 [14.4%]); type c, the bone bruise area had a similar depth in both the lateral femoral condyle and lateral tibial plateau (n = 54 [35.3%]); and type d, the bone bruise area was in the lateral tibial plateau and lateral femoral condyle and extended to the fibular head (n = 11 [7.2%]). The prevalence of collateral ligament injuries increased from grade I to III. All patients with grade III type c bone bruises had meniscal lesions. Conclusion: This new classification system provides a basis for estimating associated lesions of the knee before surgery.
RESUMEN
CSFV (classical swine fever virus) is currently endemic in developing countries in Asia and has recently re-emerged in Japan. Under the pressure of natural selection pressure, CSFV keeps evolving to maintain its ecological niche in nature. CSFV has evolved mechanisms that induce immune depression, but its pathogenic mechanism is still unclear. In this study, using transcriptomics and metabolomics methods, we found that CSFV infection alters innate host immunity by activating the interferon pathway, inhibiting host inflammation, apoptosis, and remodelling host metabolism in porcine alveolar macrophages. Moreover, we revealed that autophagy could alter innate immunity and metabolism induced by CSFV infection. Enhanced autophagy further inhibited CSFV-induced RIG-I-IRF3 signal transduction axis and JAK-STAT signalling pathway and blocked type I interferon production while reducing autophagy inhibition of the NF-κB signalling pathway and apoptosis in CSFV infection cells. Furthermore, the level of CSFV infection-induced glycolysis and the content of lactate and pyruvate, as well as 3-phosphoglyceraldehyde, a derivative of glycolysis converted to serine, was altered by autophagy. We also found that silencing HK2 (hexokinase 2), the rate-limiting enzyme of glycolytic metabolism, could induce autophagy but reduce the interferon signalling pathway, NF-κB signalling pathway, and inhibition of apoptosis induced by CSFV infection. In addition, inhibited cellular autophagy by silencing ATG5 or using 3-Methyladenine, could backfill the inhibitory effect of silencing HK2 on the cellular interferon signalling pathway, NF-κB signalling pathway, and apoptosis.