The RALF signaling pathway regulates cell wall integrity during pollen tube growth in maize.

Autocrine signaling pathways regulated by RAPID ALKALINIZATION FACTORs (RALFs) control cell wall integrity during pollen tube germination and growth in Arabidopsis (Arabidopsis thaliana). To investigate the role of pollen-specific RALFs in another plant species, we combined gene expression data with phylogenetic and biochemical studies to identify candidate orthologs in maize (Zea mays). We show that Clade IB ZmRALF2/3 mutations, but not Clade III ZmRALF1/5 mutations, cause cell wall instability in the sub-apical region of the growing pollen tube. ZmRALF2/3 are mainly located in the cell wall and are partially able to complement the pollen germination defect of their Arabidopsis orthologs AtRALF4/19. Mutations in ZmRALF2/3 compromise pectin distribution patterns leading to altered cell wall organization and thickness culminating in pollen tube burst. Clade IB, but not Clade III ZmRALFs, strongly interact as ligands with the pollen-specific Catharanthus roseus RLK1-like (CrRLK1L) receptor kinases Z. mays FERONIA-like (ZmFERL) 4/7/9, LORELEI-like glycosylphosphatidylinositol-anchor (LLG) proteins Z. mays LLG 1 and 2 (ZmLLG1/2), and Z. mays pollen extension-like (PEX) cell wall proteins ZmPEX2/4. Notably, ZmFERL4 outcompetes ZmLLG2 and ZmPEX2 outcompetes ZmFERL4 for ZmRALF2 binding. Based on these data, we suggest that Clade IB RALFs act in a dual role as cell wall components and extracellular sensors to regulate cell wall integrity and thickness during pollen tube growth in maize and probably other plants.

CARD 2023: expanded curation, support for machine learning, and resistome prediction at the Comprehensive Antibiotic Resistance Database.

The Comprehensive Antibiotic Resistance Database (CARD; card.mcmaster.ca) combines the Antibiotic Resistance Ontology (ARO) with curated AMR gene (ARG) sequences and resistance-conferring mutations to provide an informatics framework for annotation and interpretation of resistomes. As of version 3.2.4, CARD encompasses 6627 ontology terms, 5010 reference sequences, 1933 mutations, 3004 publications, and 5057 AMR detection models that can be used by the accompanying Resistance Gene Identifier (RGI) software to annotate genomic or metagenomic sequences. Focused curation enhancements since 2020 include expanded ß-lactamase curation, incorporation of likelihood-based AMR mutations for Mycobacterium tuberculosis, addition of disinfectants and antiseptics plus their associated ARGs, and systematic curation of resistance-modifying agents. This expanded curation includes 180 new AMR gene families, 15 new drug classes, 1 new resistance mechanism, and two new ontological relationships: evolutionary_variant_of and is_small_molecule_inhibitor. In silico prediction of resistomes and prevalence statistics of ARGs has been expanded to 377 pathogens, 21,079 chromosomes, 2,662 genomic islands, 41,828 plasmids and 155,606 whole-genome shotgun assemblies, resulting in collation of 322,710 unique ARG allele sequences. New features include the CARD:Live collection of community submitted isolate resistome data and the introduction of standardized 15 character CARD Short Names for ARGs to support machine learning efforts.

Long noncoding RNA lncPostn links TGF-ß and p53 signaling pathways to transcriptional regulation of cardiac fibrosis.

Cardiac fibroblasts are essential for the homeostasis of the extracellular matrix, whose remodeling in many cardiovascular diseases leads to fibrosis. Long noncoding RNAs (lncRNAs) are associated with cardiac pathologies, but their functions in cardiac fibroblasts and contributions to cardiac fibrosis remain unclear. Here, we aimed to identify fibroblast-enriched lncRNAs essential in myocardial infarction (MI)-induced fibrosis and explore the molecular mechanisms responsible for their functions. Global lncRNA profiling was performed in post-MI mouse heart ventricles and transforming growth factor-ß (TGF-ß)-treated primary cardiac fibroblasts and confirmed in published data sets. We identified the cardiac fibroblast-enriched lncPostn, whose expression is stimulated in cardiac fibrosis induced by MI and the extracellular growth factor TGF-ß. The promoter of lncPostn contains a functional TGF-ß response element, and lncPostn knockdown suppresses TGF-ß-stimulated cardiac fibroblast activation and improves cardiac functions post-MI. LncPostn stabilizes and recruits EP300 to the profibrotic periostin's promoter, representing a major mechanism for its transcriptional activation. Moreover, both MI and TGF-ß enhance lncPostn expression while suppressing the cellular growth gatekeeper p53. TGF-ß and p53 knockdown-induced profibrotic gene expression and fibrosis occur mainly through lncPostn and show additive effects. Finally, levels of serum lncPostn are significantly increased in patients' postacute MI and show a strong correlation with fibrosis markers, revealing a potential biomarker of cardiac fibrosis. Our findings identify the fibroblast-enriched lncPostn as a potent profibrotic factor, providing a transcriptional link between TGF-ß and p53 signaling pathways to regulate fibrosis in cardiac fibroblasts.NEW & NOTEWORTHY Cardiac fibroblasts are essential for the homeostasis of the extracellular matrix, whose remodeling in many cardiovascular diseases leads to fibrosis. Long noncoding RNAs are functional and contribute to the biological processes of cardiovascular development and disorders. Our findings identify the fibroblast-enriched lncPostn as a potent profibrotic factor and demonstrate that serum lncPostn level may serve as a potential biomarker of human cardiac fibrosis postacute myocardial infarction.

Embryo sac development relies on symplastic signals from ovular integuments in Arabidopsis.

Ovules are female reproductive organs of angiosperms, consisting of sporophytic integuments surrounding female gametophytes, that is, embryo sacs. Synchronization between integument growth and embryo sac development requires intracellular communication. However, signaling routes through which cells of the two generations communicate are unclear. We report that symplastic signals through plasmodesmata (PDs) of integuments are critical for the development of female gametophytes. Genetic interferences of PD biogenesis either by functional loss of CHOLINE TRANSPORTER-LIKE1 (CTL1) or by integument-specific expression of a mutated CALLOSE SYNTHASE 3 (cals3m) compromised PD formation in integuments and reduced fertility. Close examination of pINO:cals3m or ctl1 ovules indicated that female gametophytic development was either arrested at various stages after the formation of functional megaspores. In both cases, defective ovules could not attract pollen tubes, leading to the failure of fertilization. Results presented here demonstrate a key role of the symplastic route in sporophytic control of female gametophytic development.

TGFBR3 supports anoikis through suppressing ATF4 signaling.

Epithelial morphogenesis and oncogenic transformation can cause loss of cell adhesion, and detached cells are eliminated by anoikis. Here, we reveal that transforming growth factor ß receptor 3 (TGFBR3) acts as an anoikis mediator through the coordination of activating transcription factor 4 (ATF4). In breast cancer tissues, TGFBR3 is progressively lost, but elevated TGFBR3 is associated with a histologic subtype characterized by cellular adhesion defects. Dissecting the impact of extracellular matrix (ECM) deprivation, we demonstrate that ECM loss promotes TGFBR3 expression, which in turn causes differentiation of cell aggregates, conferring a low-adhesion phenotype, and drives the intrinsic apoptotic pathway. We demonstrate that inhibition of TGFBR3 impairs epithelial anoikis by activating ATF4 signaling. These preclinical findings provide a rationale for therapeutic inhibition of ATF4 in the subgroup of breast cancer patients with low TGFBR3 expression.

The influence of Acetobacter pomorum bacteria on the developmental progression of Drosophila suzukii via gluconic acid secretion.

Insects are rich in various microorganisms, which play diverse roles in affecting host biology. Although most Drosophila species prefer rotten fruits, the agricultural pest Drosophila suzukii attacks ripening fruits before they are harvested. We have reported that the microbiota has positive and negative impacts on the agricultural pest D. suzukii on nutrient-poor and -rich diets, respectively. On nutrient-poor diets, microbes provide protein to facilitate larval development. But how they impede D. suzukii development on nutrient-rich diets is unknown. Here we report that Acetobacter pomorum (Apo), a commensal bacterium in many Drosophila species and rotting fruit, has several detrimental effects in D. suzukii. Feeding D. suzukii larvae nutrient-rich diets containing live Apo significantly delayed larval development and reduced the body weight of emerged adults. Apo induced larval immune responses and downregulated genes of digestion and juvenile hormone metabolism. Knockdown of these genes in germ-free larvae reproduced Apo-like weakened phenotypes. Apo was confirmed to secrete substantial amounts of gluconic acid. Adding gluconic acid to the D. suzukii larval diet hindered larval growth and decreased adult body weight. Moreover, the dose of gluconic acid that adversely affected D. suzukii did not negatively affect Drosophila melanogaster, suggesting that D. suzukii is less tolerant to acid than D. melanogaster. Taken together, these findings indicate that D. suzukii is negatively affected by gluconic acid, which may explain why it prefers ripening fruit over Apo-rich rotting fruit. These results show an insect's tolerance to microbes can influence its ecological niche.

Microporous Polyelectrolyte Complexes by Hydroplastic Foaming.

Polyelectrolyte complexes (PECs) have emerged as an attractive category of materials for their water processability and some similarities to natural biopolymers. Herein, we employ the intrinsic hydroplasticity of PEC materials to enable the generation of porous structures with the aid of gas foaming. Such foamable materials are fabricated by simply mixing polycation, polyanion, and a UV-initiated chemical foaming agent in an aqueous solution, followed by molding into thin films. The gas foaming of the PEC films can be achieved upon exposure to UV illumination under water, where the films are plasticized and the gaseous products from the photolysis of foaming agents afford the formation, expanding, and merging of numerous bubbles. The porosity and morphology of the resulting porous films can be customized by tuning film composition, foaming conditions, and especially the degree of plasticizing effect, illustrating the high flexibility of this hydroplastic foaming method. Due to the rapid initiation of gas foaming, the present method enables the formation of porous structures via an instant one-step process, much more efficient than those existing strategies for porous PEC materials. More importantly, such a pore-forming mechanism might be extended to other hydroplastic materials (e.g., biopolymers) and help to yield hydroplasticity-based processing strategies.

Association of gene polymorphisms and the decreased expression of long non-coding RNA LOC553103 with rheumatoid arthritis.

BACKGROUND: Long non-coding RNAs (lncRNAs) are involved in many key bioprocesses, including the occurrence and development of rheumatoid arthritis (RA). We aimed to analyze the association of genetic variants of long non-coding RNA LOC553103 and its peripheral blood mononuclear cells (PBMC) expression with RA. METHODS: We enrolled 457 RA patients and 551 healthy controls and conducted a case-control study to analyze the relationship between LOC553103 gene rs272879 and the susceptibility of RA by TaqMan single nucleotide polymorphism genotyping. Among them, we sampled 92 cases and 92 controls, respectively, to detect the PBMC level of LOC553103 using quantitative real-time polymerase chain reaction technology. We explored the association between LOC553103 rs272879 and its PBMC expression levels in 71 RA patients. Mann-Whitney, Chi-square, and Spearman correlation analysis were used for statistical analysis and P-value <.05 was considered statistically significant. RESULTS: The genotype frequency of LOC553103 rs272879 CC was increased, and CG was decreased in RA patients compared to the control group (χ2 = 6.772, P = .034). The LOC553103 expression level in PBMC of RA patients was downregulated compared to healthy control (Z = -4.497, P < .001). Moreover, negative correlations were observed between the PBMC level of LOC553103 and erythrocyte sedimentation rate (rs = -0.262, P = .018), white blood cell count (rs = -0.382, P = .004), platelet (rs = -0.293, P = .030), and disease activity score in 28 joints (rs = -0.271, P = .016) in RA patients. CONCLUSIONS: This study provides the first evidence supporting an association between LOC553103 gene polymorphisms and susceptibility of RA and a relationship of PBMC level of LOC553103 with clinical manifestations and laboratory indicators of RA patients.

Uptake and cellular responses of Microcystis aeruginosa to PFOS in various environmental conditions.

Although PFOS has been banned as a persistent organic pollutant, it still exists in large quantities within the environment, thus impacting the health of aquatic ecosystems. Previous studies focused solely on high PFOS concentrations, disregarding the connection with environmental factors. To gain a more comprehensive understanding of the PFOS effects on aquatic ecosystems amidst changing environmental conditions, this study investigated the cellular responses of Microcystis aeruginosa to varying PFOS concentrations under heatwave and nutrient stress conditions. The results showed that PFOS concentrations exceeding 5.0 µg/L had obvious effects on multiple physiological responses of M. aeruginosa, resulting in the suppression of algal cell growth and the induction of oxidative damage. However, PFOS concentration at levels below 20.0 µg/L has been found to enhance the growth of algal cells and trigger significant oxidative damage under heatwave conditions. Heatwave conditions could enhance the uptake of PFOS in algal cells, potentially leading to heightened algal growth when PFOS concentration was equal to or less than 5.0 µg/L. Conversely, deficiency or limitation of nitrogen and phosphorus significantly decreased algal abundance and chlorophyll content, inducing severe oxidative stress that could be mitigated by exposure to PFOS. This study holds significance in managing the impact of PFOS on algal growth across diverse environmental conditions.

Clinical Characteristics of Coronavirus Disease 2019 in China.

BACKGROUND: Since December 2019, when coronavirus disease 2019 (Covid-19) emerged in Wuhan city and rapidly spread throughout China, data have been needed on the clinical characteristics of the affected patients. METHODS: We extracted data regarding 1099 patients with laboratory-confirmed Covid-19 from 552 hospitals in 30 provinces, autonomous regions, and municipalities in mainland China through January 29, 2020. The primary composite end point was admission to an intensive care unit (ICU), the use of mechanical ventilation, or death. RESULTS: The median age of the patients was 47 years; 41.9% of the patients were female. The primary composite end point occurred in 67 patients (6.1%), including 5.0% who were admitted to the ICU, 2.3% who underwent invasive mechanical ventilation, and 1.4% who died. Only 1.9% of the patients had a history of direct contact with wildlife. Among nonresidents of Wuhan, 72.3% had contact with residents of Wuhan, including 31.3% who had visited the city. The most common symptoms were fever (43.8% on admission and 88.7% during hospitalization) and cough (67.8%). Diarrhea was uncommon (3.8%). The median incubation period was 4 days (interquartile range, 2 to 7). On admission, ground-glass opacity was the most common radiologic finding on chest computed tomography (CT) (56.4%). No radiographic or CT abnormality was found in 157 of 877 patients (17.9%) with nonsevere disease and in 5 of 173 patients (2.9%) with severe disease. Lymphocytopenia was present in 83.2% of the patients on admission. CONCLUSIONS: During the first 2 months of the current outbreak, Covid-19 spread rapidly throughout China and caused varying degrees of illness. Patients often presented without fever, and many did not have abnormal radiologic findings. (Funded by the National Health Commission of China and others.).

Enforcing energy consumption promotes microbial extracellular respiration for xenobiotic bioconversion.

Extracellular electron transfer (EET) empowers electrogens to catalyse the bioconversion of a wide range of xenobiotics in the environment. Synthetic bioengineering has proven effective in promoting EET output. However, conventional strategies mainly focus on modifications of EET-related genes or pathways, which leads to a bottleneck due to the intricate nature of electrogenic metabolic properties and intricate pathway regulation that remain unelucidated. Herein, we propose a novel EET pathway-independent approach, from an energy manipulation perspective, to enhance microbial EET output. The Controlled Hydrolyzation of ATP to Enhance Extracellular Respiration (CHEER) strategy promotes energy utilization and persistently reduces the intracellular ATP level in Shewanella oneidensis, a representative electrogenic microbe. This approach leads to the accelerated consumption of carbon substrate, increased biomass accumulation and an expanded intracellular NADH pool. Both microbial electrolysis cell and microbial fuel cell tests exhibit that the CHEER strain substantially enhances EET capability. Analysis of transcriptome profiles reveals that the CHEER strain considerably bolsters biomass synthesis and metabolic activity. When applied to the bioconversion of model xenobiotics including methyl orange, Cr(VI) and U(VI), the CHEER strain consistently exhibits enhanced removal efficiencies. This work provides a new perspective and a feasible strategy to enhance microbial EET for efficient xenobiotic conversion.

Two-Dimensional Nanofluidic Membranes with Intercalated In-Plane Shortcuts for High-Performance Blue Energy Harvesting.

Two-dimensional nanofluidic membranes offer great opportunities for developing efficient and robust devices for ionic/water-nexus energy harvesting. However, low counterion concentration and long pathway through limited ionic flux restrict their output performance. Herein, it is demonstrated that rapid diffusion kinetics can be realized in two-dimensional nanofluidic membranes by introducing in-plane holes across nanosheets, which not only increase counterion concentration but also shorten pathway length through the membranes. Thus, the holey membranes exhibited an enhanced performance relative to the pristine ones in terms of osmotic energy conversion. In particular, a biomimetic multilayered membrane sequentially assembled from pristine and holey sections offers an optimized combination of selectivity and permeability, therefore generating a power density up to 6.78 W m-2 by mixing seawater and river water, superior to the majority of the state-of-the-art lamellar nanofluidic membranes. This work highlights the importance of channel morphologies and presents a general strategy for effectively improving ion transport through lamellar membranes for high-performance nanofluidic devices.

A highly efficient method to access unprotected C-3 bifunctional quaternary 3-allyl-3-(amino)oxindoles.

A highly efficient Rh(II) catalyzed non-radical protocol to access NH-free C-3 bifunctional oxindoles, which possess 3-allyl and 3-amino simultaneously, was first achieved by employing an intermolecular [2,3]-sigmatropic rearrangement reaction between diazooxindoles and tertiary allylic amines. Utilizing readily available allylamines as the nitrogen and allyl source concurrently, a wide range of bio-active 3-allyl-3-(amino)oxindoles were obtained in excellent yields under very mild reaction conditions; meanwhile, the TON can be up to 90 000. Our study addresses a gap in the literature by investigating intermolecular rearrangements of ammonium ylides with diazoamides, which have been relatively understudied.

Radionuclide Reduction by Combinatorial Optimization of Microbial Extracellular Electron Transfer with a Physiologically Adapted Regulatory Platform.

Microbial extracellular electron transfer (EET) is the basis for many microbial processes involved in element geochemical recycling, bioenergy harvesting, and bioremediation, including the technique for remediating U(VI)-contaminated environments. However, the low EET rate hinders its full potential from being fulfilled. The main challenge for engineering microbial EET is the difficulty in optimizing cell resource allocation for EET investment and basic metabolism and the optimal coordination of the different EET pathways. Here, we report a novel combinatorial optimization strategy with a physiologically adapted regulatory platform. Through exploring the physiologically adapted regulatory elements, a 271.97-fold strength range, autonomous, and dynamic regulatory platform was established for Shewanella oneidensis, a prominent electrochemically active bacterium. Both direct and mediated EET pathways are modularly reconfigured and tuned at various intensities with the regulatory platform, which were further assembled combinatorically. The optimal combinations exhibit up to 16.12-, 4.51-, and 8.40-fold improvements over the control in the maximum current density (1009.2 mA/m2) of microbial electrolysis cells and the voltage output (413.8 mV) and power density (229.1 mW/m2) of microbial fuel cells. In addition, the optimal strains exhibited up to 6.53-fold improvement in the radionuclide U(VI) removal efficiency. This work provides an effective and feasible approach to boost microbial EET performance for environmental applications.

[Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines (â ¡): classification of tablets disintegration behavior].

In this paper, 50 batches of representative traditional Chinese medicine tablets were selected and the disintegration time was examined with the method in Chinese Pharmacopoeia. The disintegration time and disintegration phenomenon were recorded, and the dissolution behaviors of water-soluble and ultraviolet-absorbent components during the disintegration process of tablets were characterized by self-control method. The results revealed that coating type and raw material type influenced the disintegration time of tablets. It was found that only 4% of traditional Chinese medicine tablets had obvious fragmentation during the disintegration process, while 96% of traditional Chinese medicine tablets showed gradual dissolution or dispersion. Furthermore, according to the disintegration speed, disintegration phenomenon, and whether the cumulative dissolution of measured components was > 90% at complete disintegration, a disintegration behavior classification system(DBCS) was created for the regular-release traditional Chinese medicine tablets. As a result, the disintegration behaviors of 50 batches of traditional Chinese medicine tablets were classified into four categories, i.e. ⅠA_2, ⅠB_1, ⅡB_1, and ⅡB_2. traditional Chinese medicine tablets(Class I) with disintegration time ≤ 30 min were defined to be rapid in disintegration, which can be the objective of optimization or improvement of Chinese herbal extract(semi extract) tablets. Different drug release models were used to fit the dissolution curve of traditional Chinese medicine tablets with gradual dissolution or dispersion phenomenon(i.e. Type B tablets). The results showed that the dissolution curves of water-soluble components in the disintegration process conformed to the zero order kinetics and the Ritger-Peppas model. It could be inferred that the disintegration mechanisms of type B tablets were a combination of dissolution controlled and swelling controlled mechanisms. This study contributes to understanding the disintegration behavior of traditional Chinese medicine tablets, and provides a reference for the design and improvement of disintegration performance of traditional Chinese medicine tablets.

[Patent application of intelligent quality control technology in traditional Chinese medicine production process: a review].

In the new stage for intelligent manufacturing of traditional Chinese medicine(TCM) from pilot demonstration to in-depth application and comprehensive promotion, how to raise the degree of intelligence for the process quality control system has become the bottleneck of the development of TCM production process control technology. This article has sorted out 226 TCM intelligent manufacturing projects that have been approved by the national and provincial governments since the implementation of the "Made in China 2025" plan and 145 related pharmaceutical enterprises. Then, the patents applied by these pharmaceutical enterprises were thoroughly retrieved, and 135 patents in terms of intelligent quality control technology in the production process were found. The technical details about intelligent quality control at both the unit levels such as cultivation, processing of crude herbs, preparation pretreatment, pharmaceutical preparations, and the production workshop level were reviewed from three aspects, i.e., intelligent quality sensing, intelligent process cognition, and intelligent process control. The results showed that intelligent quality control technologies have been preliminarily applied to the whole process of TCM production. The intelligence control of the extraction and concentration processes and the intelligent sensing of critical quality attributes are currently the focus of pharmaceutical enterprises. However, there is a lack of process cognitive patent technology for the TCM manufacturing process, which fails to meet the requirements of closed-loop integration of intelligent sensing and intelligent control technologies. It is suggested that in the future, with the help of artificial intelligence and machine learning methods, the process cognitive bottleneck of TCM production can be overcome, and the holistic quality formation mechanisms of TCM products can be elucidated. Moreover, key technologies for system integration and intelligent equipment are expected to be innovated and accelerated to enhance the quality uniformity and manufacturing reliability of TCM.

[Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines(â £): classification of hygroscopicity behaviors of capsules].

Hard capsules of traditional Chinese medicine(TCM) have different degrees of hygroscopicity, which affects the stability and efficacy of drugs. In this paper, 30 kinds of commercially available TCM capsules were used as the research object. The hygroscopicity curves of capsule contents, capsule shells, and capsules were tested respectively, and the first-order kinetic equation was used for fitting. The results show that during the 24 h hygroscopicity process, the capsule shell can reduce the weight gain caused by the hygroscopicity of the contents by 0.80%-53.0% and the hygroscopicity rate of the capsule contents by 1.74%-91.3%, indicating that the capsule shell has a strong delay effect on the hygroscopicity of the contents of the TCM capsules. Seven physical parameters of the contents of 30 kinds of TCM capsules were determined, and 14 prescription process-related parameters were sorted out. A partial least squares model for predicting the hygroscopicity rate of the contents of TCM capsules(with shell) for 24 h was established. It is found that the hygroscopicity rate of the capsule shell is positively correlated with the hygroscopicity of the contents of TCM capsules(with shell), suggesting that the capsule shell with a low hygroscopicity rate is helpful for moisture prevention. In addition, the pre-treatment process route of the preparation and the type of molding raw materials affect the hygroscopicity. A larger proportion of the extract in the capsule content and a smaller proportion of the fine powder of the decoction pieces indicate stronger hygroscopicity of the capsule content. The 24 h hygroscopicity rate of 15% was used as the classification node of hygroscopicity strength, and the hygroscopicity rate constant of 0.58 was used as the classification node of hygroscopicity speed. The classification system of hygroscopicity behaviors of TCM capsules was established: the varieties with strong and fast hygroscopicity accounted for about 6.67%, while those with strong and slow hygroscopicity accounted for about 33.3%; the varieties with weak and fast hygroscopicity accounted for about 26.7%, while those with weak and slow hygroscopicity accounted for about 33.3%. The classification system is helpful to quantify and compare the hygroscopicity behavior of different TCM capsules and provides a reference for the quality improvement, moisture prevention technologies, and material research of TCM capsules.

[Research progress and maturity assessment of continuous manufacturing of traditional Chinese medicine].

The pharmaceutical manufacturing model is gradually changing from intermittent manufacturing to continuous manufacturing and intelligent manufacturing. This paper briefly reviewed the supervision and research progress in continuous pharmaceutical manufacturing in China and abroad and described the definition and advantages of continuous pharmaceutical manufacturing. The continuous manufacturing of traditional Chinese medicine(TCM) at the current stage was summarized in the following three terms: the enhancement of the continuity of intermittent manufacturing operations, the integration of continuous equipment to improve physical continuity between units, and the application of advanced process control strategies to improve process continuity. To achieve continuous manufacturing of TCM, the corresponding key technologies, such as material property characterization, process modeling and simulation, process analysis technology, and system integration, were analyzed from the process and equipment, respectively. It was proposed that the continuous manufacturing equipment system should have the characteristics of high speed, high response, and high reliability, "three high(H~3)" for short. Considering the characteristics and current situation of TCM manufacturing, based on the two dimensions of product quality control and production efficiency, a maturity assessment model for continuous manufacturing of TCM, consisting of operation continuity, equipment continuity, process continuity, and quality control continuity, was proposed to provide references for the application of continuous manufacturing technology for TCM. The implementation of continuous manufacturing or the application of key continuous manufacturing technologies in TCM can help to systematically integrate advanced pharmaceutical technology elements and promote the uniformity of TCM quality and the improvement of production efficiency.

Development of an MSPQC Nucleic Acid Sensor Based on CRISPR/Cas9 for the Detection of Mycobacterium tuberculosis.

Accurate and rapid detection of nucleic acid plays a vital role in the clinical treatment of tuberculosis caused by Mycobacterium tuberculosis (M.TB). However, false-negative and false-positive results caused by base mismatches could affect the detection accuracy. Inspired by the unique property of CRISPR/Cas9, we proposed a new MSPQC M.TB sensor based on the CRISPR/Cas9 system, which can distinguish single-base mismatches in 10 bases from the protospacer adjacent motif (PAM) region. In the proposed sensor, single-stranded DNA on Au interdigital electrodes was used as a capture probe for the target and an initiator for hybridization chain reaction (HCR). HCR was used to generate long double-stranded DNA (dsDNA), which could span the Au interdigital electrodes. CRISPR/Cas9 was used as recognition components to recognize capture/target dsDNA. When the target existed, the capture probe hybridized with the target to form dsDNA, which could be recognized and cut by CRISPR/Cas9. Thus, the DNA connection between electrodes was cut off and resulted in the MSPQC response. When no target existed, the capture probe remained single-stranded and could not be recognized and cut by CRISPR/Cas9. Therefore, DNA connection between electrodes was reserved. Moreover, silver staining technology was utilized to improve the sensitivity of detection. M.TB was detected by the proposed sensor using specific sequence fragments of 16S rRNA of M.TB as the target. The detection time was down to 2.3 h. The limit of detection (LOD) was 30 CFU/mL.

Maximizing energy utilization in DMD-based projection lithography.

In digital micromirror device (DMD)-based projection photolithography, the throughput largely depends on the effectiveness of the laser energy utilization, which is directly correlated to the diffraction efficiency of DMD. Here, to optimize the DMD diffraction efficiency and thus the laser energy utilization, we calculate the diffraction efficiencies Ediffraction of DMD with various pitch sizes at wavelengths ranging from 200 nm to 800 nm, using the two-dimensional blazed grating diffraction theory. Specifically, the light incident angle is optimized for 343 nm laser and 7.56 µm pitch-size DMD, and the maximum single-order diffraction efficiency Ediffraction is increased from 40% to 96%. Experimentally, we use the effective energy utilization ηeff = Ediffraction,(m,n)/Σ[Ediffraction,(m,n)] at the entrance pupil plane of the objective to verify the effectiveness of the optimized illumination angle in a lithography illumination system with parallel beams of two wavelengths (343 nm and 515 nm). The ηeff of a "blaze" order at a 34° angle of incidence can be optimized up to 88%. The experimental results are consistent with the tendency of the calculated results, indicating that this optimization model can be used to improve the energy utilization of projection lithography with the arbitrarily designable wavelengths and the DMD's pitch size.