RESUMEN
Metalenses are one of the most promising metasurface applications. However, all-dielectric reflective metalenses are rarely studied, especially regarding their off-axis focusing performance. After experimentally studying the material optical properties in this work, we propose reflective metalens based on titanium dioxide (TiO2) and silicon dioxide (SiO2), which operate at a visible wavelength of 0.633 µm. Unlike conventional reflective metalenses based on metallic mirrors, the proposed device was designed based on a modified parabolic phase profile and was integrated onto a dielectric distributed Bragg reflector periodic structure to achieve high reflectivity with five dielectric pairs. The focusing efficiency characteristics of the metalens were experimentally studied for beam angles of incidence between 0∘ and 30∘. The results reveal that the focusing efficiency for the modified metalens design remains higher than 54%, which is higher than 50%, making it promising for photonic miniaturization and integration.
RESUMEN
The appealing properties of tunable direct wide bandgap, high-temperature robustness and chemical hardness, make AlxGa1-xN a promising candidate for fabricating robust solar-blind photodetectors (PDs). In this work, we have utilized the optical phenomenon of localized surface plasmon resonance (LSPR) in metal nanoparticles (NPs) to significantly enhance the performance of solar-blind Al0.4Ga0.6N metal-semiconductor-metal PDs that exhibit high-temperature robustness. We demonstrate that the presence of palladium (Pd) NPs leads to a remarkable enhancement by nearly 600, 300, and 462%, respectively, in the photo-to-dark current ratio (PDCR), responsivity, and specific detectivity of the Al0.4Ga0.6N PD at the wavelength of 280 nm. Using the optical power density of only 32µW cm-2at -10 V, maximum values of â¼3 × 103, 2.7 AW-1, and 2.4 × 1013Jones are found for the PDCR, responsivity and specific detectivity, respectively. The experimental observations are supported by finite difference time domain simulations, which clearly indicate the presence of LSPR in Pd NPs decorated on the surface of Al0.4Ga0.6N. The mechanism behind the enhancement is investigated in detail, and is ascribed to the LSPR induced effects, namely, improved optical absorption, enhanced local electric field and LSPR sensitization effect. Moreover, the PD exhibits a stable operation up to 400 K, thereby exhibiting the high-temperature robustness desirable for commercial applications.
RESUMEN
The growth of regularly patterned multi-section GaN nanorod (NR) arrays based on a pulsed growth technique with metalorganic chemical vapor deposition is demonstrated. Such an NR with multiple sections of different cross-sectional sizes is formed by tapering a uniform cross section to another through stepwise decreasing of the Ga supply duration to reduce the size of the catalytic Ga droplet. Contrast line structures are observed in either a scanning electron microscopy or transmission electron microscopy image of an NR. Such a contrast line-marker corresponds to a thin Ga-rich layer formed at the beginning of GaN precipitation of a pulsed growth cycle and illustrates the boundary between two successive growth cycles in pulsed growth. By analyzing the geometry variation of the contrast line-markers, the morphology evolution in the growth of a multi-section NR, including a tapering process, can be traced. Such a morphology variation is controlled by the size of the catalytic Ga droplet and its coverage range on the slant facets at the top of an NR. The comparison of emission spectra between single-, two-, and three-section GaN NRs with sidewall InGaN/GaN quantum wells indicates that a multi-section NR can lead to a significantly broader sidewall emission spectrum.
RESUMEN
The growth of a two-section, core-shell, InGaN/GaN quantum-well (QW) nanorod- (NR-) array light-emitting diode device based on a pulsed growth technique with metalorganic chemical vapor deposition is demonstrated. A two-section n-GaN NR is grown through a tapering process for forming two uniform NR sections of different cross-sectional sizes. The cathodoluminescence (CL), photoluminescence (PL), and electrolumines-cence (EL) characterization results of the two-section NR structure are compared with those of a single-section NR sample, which is prepared under the similar condition to that for the first uniform NR section of the two-section sample. All the CL, PL, and EL spectra of the two-section sample (peaked between 520 and 525 nm) are red-shifted from those of the single-section sample (peaked around 490 nm) by >30 nm in wavelength. Also, the emitted spectral widths of the two-section sample become significantly larger than their counterparts of the single-section sample. The PL spectral full-width at half-maximum increases from ~37 to ~61 nm. Such variations are attributed to the higher indium incorporation in the sidewall QWs of the two-section sample due to the stronger strain relaxation in an NR section of a smaller cross-sectional size and the more constituent atom supply from the larger gap volume between neighboring NRs.
RESUMEN
The emission behaviors of four light-emitting diodes (LEDs) of different substrate structures, including a lateral LED grown on sapphire, a vertical LED wafer-bonded onto Si (111), a bendable LED Ag-epoxied onto a flat metal, and another bendable LED Ag-epoxied onto a metal of a curved surface, under different duty cycles of current injection are compared. Their different variation trends of emission behavior with injection duty cycle are attributed to the different thermally-induced strain conditions in the epitaxial layers, which are controlled by their substrate structures, in increasing injection duty cycle or current level. The results of Raman scattering measurements during LED operation show that a stronger tensile strain is generated under heating for reducing the quantum-confined Stark effect and hence increasing emission efficiency when the epitaxial layer is not tightly bonded onto a hard substrate. Such a behavior is particularly stronger when the epitaxial layer is bent.
RESUMEN
The growth and process of a regularly patterned nanorod (NR)- light-emitting diode (LED) array with its emission from sidewall non-polar quantum wells (QWs) are demonstrated. A pyramidal un-doped GaN structure is intentionally formed at the NR top for minimizing the current flow through this portion of the NR such that the injection current can be effectively guided to the sidewall m-plane InGaN/GaN QWs for emission excitation by a conformal transparent conductor (GaZnO). The injected current density at a given applied voltage of the NR LED device is similar to that of a planar c-plane or m-plane LED. The blue-shift trend of NR LED output spectrum with increasing injection current is caused by the non-uniform distributions of QW width and indium content along the height on a sidewall. The photoluminescence spectral shift under reversed bias confirms that the emission of the fabricated NR LED comes from non-polar QWs.
RESUMEN
To achieve green emission from the sidewall non-polar quantum wells (QWs) of a GaN nanorod (NR) light-emitting diode, regularly patterned InGaN/GaN QW NR arrays are grown under various growth conditions of indium supply rate, QW growth temperature, and QW growth time for comparing their emission wavelength variations of the top-face c-plane and sidewall m-plane QWs based on photoluminescence and cathodoluminescence (CL) measurements. Although the variation trends of QW emission wavelength by changing those growth conditions in the NR structure are similar to those in the planar structure, the emission wavelength range of the QWs on an NR is significantly shorter than that in a planar structure under the same growth conditions. Under the growth conditions for a longer NR QW emission wavelength, the difference of emission wavelength between the top-face and sidewall QWs is smaller. Also, the variation range of the emission wavelength from the sidewall QWs over different heights on the sidewall becomes larger. On the other hand, strain state analysis based on transmission electron microscopy is undertaken to calibrate the average QW widths and average indium contents in the two groups of QW of an NR. The variation trends of the calibrated QW widths and indium contents are consistent with those of the CL emission wavelengths from various portions of NR QWs.
RESUMEN
The enhancement of output intensity, the generation of polarized output, and the reduction of the efficiency droop effect in a surface plasmon (SP) coupled vertical light-emitting diode (LED) with an Ag nano-grating structure located between the p-GaN layer and the wafer bonding metal for inducing SP coupling with the InGaN/GaN quantum wells (QWs) are demonstrated. In fabricating the vertical LED, the patterned sapphire substrate is removed with a photoelectrochemical liftoff technique. Based on the reflection measurement from the metal grating structure and the numerical simulation result, it is found that the localized surface plasmon (LSP) resonance induced around the metal grating crest plays the major role in the SP-QW coupling process although a hybrid mode of LSP and surface plasmon polariton can be generated in the coupling process. By adding a surface grating structure to the SP-coupled vertical LED on the n-GaN side, the output intensity is further enhanced, the output polarization ratio is further increased, and the efficiency droop effect is further suppressed.
RESUMEN
We report the extraordinary tunneling process that finds the lower cohesive energy route for stablizing InN shell layer on m-plane sidewall of GaN nanorod. The [0001] orientated GaN nanorod array is grown on sapphire substrate patterned with Ga nanoparticle by metal-organic vapor deposition method, based on which the simulation structures of c-plane top surface and m-plane sidewall surface is constructed for the first-principles calculations. The results show that the introduction of In wetting monolayer could effectively lower the cohesive energy of adalayers on non-polar GaN surfaces. Most importantly, it is revealed that there exists an extraordinary tunneling process in which the N atoms will drag out the In wetting atoms and tunnel through to form stable InN shell layer on the nanorod sidewall.
RESUMEN
Recent advancements in power electronics have been driven by Ga2O3-based ultrawide bandgap (UWBG) semiconductor devices, enabling efficient high-current switching. However, integrating Ga2O3 power devices with essential silicon CMOS logic circuits for advanced control poses fabrication challenges. Researchers have introduced Ga2O3-based NMOS and pseudo-CMOS circuits for integration, but these circuits may either consume more power or increase the design complexity. Hence, this article proposes Ga2O3-based CMOS realized using heterogeneous 3D-stacked bilayer ambipolar transistors. These ambipolar transistors consist of HfO2/NiO/Ga2O3/NiO/HfO2 heterostructures that are wrapped around by the Ti/Au gate electrode, resulting in record high electron and hole current on/off ratios of 109 and 107. The threshold voltage, subthreshold swing, and current density measured from 100 ambipolar devices (across 5 batches) are around -7.99 ± 0.92 V (p-channel) and 7.81 ± 0.81 V (n-channel), 0.59 ± 0.07 V/dec (p-channel) and 0.61 ± 0.06 V/dec (n-channel), and 0.99 ± 0.26 mA/mm (p-channel) and 58.23 ± 12.99 mA/mm (n-channel), respectively. All the 100 ambipolar devices showed decent long-term stability over a period of 200 days, exhibiting reliable electrical performance. The threshold voltage shift (ΔVTH) after negative bias stressing for a period of 3500 s is around 11.52 V (p-channel) and 10.21 V (n-channel), respectively. Notably, the n-channels exhibit â¼2 orders higher on/off ratio than the best Ga2O3 unipolar transistors at 300 °C. Moreover, the polarities of ambipolar transistors are reconfigurable into p- or n-MOS, which are integrated to demonstrate CMOS inverter, NOR, and NAND logic gates. The switching periods from "0" to "1" and from "1" to "0" of NOR are 0.12 and 0.17 µs, and those of NAND are 0.16 and 0.13 µs. This work lays the foundation of oxide-semiconductor-based CMOS for future integrated electronics.
RESUMEN
For enhancing the light extraction of a light-emitting diode, surface grating fabrication based on a simple method of combining photoelectrochemical (PEC) etching with phase mask interferometry has been demonstrated. To understand the optimum grating period in forming a surface grating on a vertical light-emitting diode (VLED), we construct a Llyod's interferometer within PEC electrolyte (KOH) to fabricate surface gratings of various periods on VLEDs for comparing their light extraction efficiencies. Also, to compare the effectiveness of light extraction enhancement between surface grating and rough surface, VLEDs with the rough surfaces fabricated with two different KOH wet etching methods are fabricated. The comparisons of VLED characterizations show that among those grating VLEDs, the light extraction is more effective in a VLED of a smaller grating period. Also, compared with VLEDs of rough surfaces, the grating VLEDs of short grating periods (<2 µm) have the higher light extraction efficiencies, even though the root-mean-square roughness of the rough surface is significantly larger than the grating groove depth.
Asunto(s)
Lentes , Iluminación/instrumentación , Refractometría/instrumentación , Semiconductores , Diseño Asistido por Computadora , Transferencia de Energía , Diseño de Equipo , Análisis de Falla de Equipo , Propiedades de SuperficieRESUMEN
A light-emitting device consisting of a two-dimensional regularly patterned InGaN/GaN quantum well (QW) nanorod (NR) light-emitting diode (LED) array is implemented and characterized. The NR p-i-n structure includes n-GaN NR core and essentially conformal p-GaN shell. The active regions include nonpolar sidewall QWs and polar top-face QWs. A conformal layer of transparent GaZnO of low resistivity is deposited onto the NR LED structure for spreading the injection current over the sidewalls. It is found that the blue-shift range of the output spectral peak in increasing injection current is smaller than that of a planar LED of about the same operation wavelength in a similar variation range of injection current density although it is nonzero. The small blue-shift range is attributed to the mixed emission contributions from the nonpolar sidewall QWs and polar top-face QWs.
RESUMEN
CdZnO/ZnO quantum well (QW) samples are grown on GaN and ZnO templates with plasma-assisted molecular beam epitaxy under different conditions of substrate temperature, Cd effusion cell temperature, and O(2) flow rate for emission characteristics comparison. It is found that the Cd incorporation on the ZnO template is generally lower, when compared with that on the GaN template, such that the O(2) flow rate needs to be reduced for stoichiometric CdZnO/ZnO QW growth on the ZnO template. Besides the wurtzite (wt) CdZnO structure, the rock-salt (rs) CdZnO structure exists in the CdZnO well layers when the total Cd content is high. The rs structure may dominate over the wt structure in photoluminescence intensity when the total Cd content is high. In either group of samples on the GaN and ZnO templates, the emission efficiency first increases and then decreases with increasing total Cd content. The low emission efficiency at low (high) Cd content is attributed to the weaker quantum confinement (the poorer crystal quality) of the QWs. The emission efficiencies of the QW samples on the GaN template are generally higher than those on the ZnO template. The carrier localization behavior in a CdZnO/ZnO QW, grown on either GaN or ZnO template, is significantly weaker than that in an InGaN/GaN QW. The strength of the quantum-confined Stark effect generally increases with increasing Cd content in either group of samples on the GaN and ZnO templates.
Asunto(s)
Compuestos de Cadmio/química , Galio/química , Impresión Molecular/métodos , Óxidos/química , Puntos Cuánticos , Óxido de Zinc/química , Adsorción , Luz , Ensayo de Materiales , Dispersión de RadiaciónRESUMEN
With the nano-imprint lithography and the pulsed growth mode of metalorganic chemical vapor deposition, a regularly-patterned, c-axis nitride nanorod (NR) array of quite uniform geometry with simultaneous depositions of top-face, c-plane disc-like and sidewall, m-plane core-shell InGaN/GaN quantum well (QW) structures is formed. The differences of geometry and composition between these two groups of QW are studied with scanning electron microscopy, cathodoluminescence, and transmission electron microscopy (TEM). In particular, the strain state analysis results in TEM observations provide us with the information about the QW width and composition. It is found that the QW widths are narrower and the indium contents are higher in the sidewall m-plane QWs, when compared with the top-face c-plane QWs. Also, in the sidewall m-plane QWs, the QW width (indium content) decreases (increases) with the height on the sidewall. The observed results can be interpreted with the migration behaviors of the constituent atoms along the NR sidewall from the bottom.
RESUMEN
The counteraction between the increased carrier localization effect due to the change of composition nanostructure in the quantum wells (QWs), which is caused by the thermal annealing process, and the enhanced quantum-confined Stark effect in the QWs due to the increased piezoelectric field, which is caused by the increased p-type layer thickness, when the p-type layer is grown at a high temperature on the InGaN/GaN QWs of a high-indium light-emitting diode (LED) is demonstrated. Temperature- and excitation power-dependent photoluminescence (PL) measurements are performed on three groups of sample, including 1) the samples with both effects of thermal annealing and increased p-type thickness, 2) those only with the similar thermal annealing process, and 3) those with increased overgrowth thickness and minimized thermal annealing effect. From the comparisons of emission wavelength, internal quantum efficiency (IQE), spectral shift with increasing PL excitation level, and calibrated activation energy of carrier localization between various samples in the three groups, one can clearly see the individual effects of thermal annealing and increased p-type layer thickness. The counteraction leads to increased IQE and blue-shifted emission spectrum with increasing p-type thickness when the thickness is below a certain value (20-nm p-AlGaN plus 60-nm p-GaN under our growth conditions). Beyond this thickness, the IQE value decreases and the emission spectrum red shifts with increasing p-type thickness.
Asunto(s)
Galio/química , Indio/química , Óptica y Fotónica , Fotoquímica/métodos , Calibración , Simulación por Computador , Diseño de Equipo , Calor , Luz , Luminiscencia , Temperatura , Difracción de Rayos XRESUMEN
Flexible Ga2O3 photodetectors have attracted considerable interest owing to their potential use in the development of implantable, foldable, and wearable optoelectronics. In particular, ß-phase Ga2O3 has been most widely investigated due to the highest thermodynamic stability. However, high-quality ß-phase Ga2O3 relies on the ultrahigh crystallization temperature (usually ≥750 °C), beyond the thermal tolerance of most flexible substrates. In this work, we epitaxially grow a high-quality metastable κ-phase Ga2O3 (002) thin film on a flexible mica (001) substrate under 680 °C and develop a flexible κ-Ga2O3 thin film photodetector with ultrahigh performance. Epitaxial κ-Ga2O3 and the mica substrate are maintained to be thermally stable up to 750 °C, suggesting their potential for harsh environment applications. The responsivity, on/off ratio, detectivity, and external quantum efficiency of the fabricated photodetector are 703 A/W, 1.66 × 107, 4.08 × 1014 Jones, and 3.49 × 105 %, respectively, for 250 nm incident light and a 20 V bias voltage. These values are record-high values reported to date for flexible Ga2O3 photodetectors. Furthermore, the flexible photodetector shows robust flexibility for bending radii of 1, 2, and 3 cm. More importantly, it shows strong mechanical stability against 10,000 bending test cycles. These results reveal the significance of high-quality κ-phase Ga2O3 grown heteroepitaxially on a flexible mica substrate, especially its potential for use in future flexible solar-blind detection systems.
RESUMEN
Transferable Ga2O3 thin film membrane is desirable for vertical and flexible solar-blind photonics and high-power electronics applications. However, Ga2O3 epitaxially grown on rigid substrates such as sapphire, Si, and SiC hinders its exfoliation due to the strong covalent bond between Ga2O3 and substrates, determining its lateral device configuration and also hardly reaching the ever-increasing demand for wearable and foldable applications. Mica substrate, which has an atomic-level flat surface and high-temperature tolerance, could be a good candidate for the van der Waals (vdW) epitaxy of crystalline Ga2O3 membrane. Beyond that, benefiting from the weak vdW bond between Ga2O3 and mica substrate, in this work, the Ga2O3 membrane is exfoliated and transferred to arbitrary flexible and adhesive tape, allowing for the vertical and flexible electronic configuration. This straightforward exfoliation method is verified to be consistent and reproducible by the transfer and characterization of thick (â¼380 nm)/thin (â¼95 nm) κ-phase Ga2O3 and conductive n-type ß-Ga2O3. Vertical photodetectors are fabricated based on the exfoliated Ga2O3 membrane, denoting the peak response at â¼250 nm. Through the integration of Ti/Au Ohmic contact and Ni/Ag Schottky contact electrode, the vertical photodetector exhibits self-powered photodetection behavior with a responsivity of 17 mA/W under zero bias. The vdW-bond-assisted exfoliation of the Ga2O3 membrane demonstrated here could provide enormous opportunities in the pursuit of vertical and flexible Ga2O3 electronics.
RESUMEN
The epitaxial growth of technically important ß-Ga2O3 semiconductor thin films has not been realized on flexible substrates due to the limitations of high-temperature crystallization conditions and lattice-matching requirements. We demonstrate the epitaxial growth of ß-Ga2O3(-201) thin films on flexible CeO2(001)-buffered Hastelloy tape. The results indicate that CeO2(001) has a small bi-axial lattice mismatch with ß-Ga2O3(-201), inducing simultaneous double-domain epitaxial growth. Flexible photodetectors are fabricated on the epitaxial ß-Ga2O3-coated tape. Measurements reveal that the photodetectors have a responsivity of 4 × 104 mA/W, with an on/off ratio reaching 1000 under 254 nm incident light and 5 V bias voltage. Such a photoelectrical performance is within the mainstream level of ß-Ga2O3-based photodetectors using conventional rigid single-crystal substrates. More importantly, it remained robust against more than 20,000 bending test cycles. Moreover, the technique paves the way for the direct in situ epitaxial growth of other flexible oxide semiconductor devices in the future.
RESUMEN
This study demonstrates a non-degenerate pump-probe spectroscopy with a white light beam probe based on a regenerative, amplified, mode-locked, Ti:sapphire laser. This white light beam probe is produced by supercontinuum generation of sapphire crystal after ultra-short pulse excitation. To implement the pump-probe experimental operation, the ablation dynamics with and without fresh spot measurements in fused silica samples are demonstrated. Combining the time-resolved differential reflection profiles in the white light range and X-ray photoelectron spectroscopy spectra of fused silica, the following ablation dynamics processes can be observed: Without fresh spot measurements, once carriers are excited, first, the three absorption bands of the intrinsic defect sites are observed within 750 fs. Then, a fast recovery is observed. This recovery comes from defect-trapped carriers excited to conduction bands through hot-carrier-phonon interactions. In the final step, a rapidly rising signal is observed after 800 fs. This signal rise comes from the creation of free-electron plasma, the density of which increases with increasing excitation energy accumulation. With fresh spot measurements, time delay of carrier dynamics among the three bands can be identified clearly within 750 fs. The intrinsic defect sites of fused silica play the key role during the ultrafast laser ablation process.
RESUMEN
The experimental demonstrations of light-emitting diode (LED) fabrication with surface plasmon (SP) coupling with the radiating dipoles in its quantum wells are first reviewed. The SP coupling with a radiating dipole can create an alternative emission channel through SP radiation for enhancing the effective internal quantum efficiency when the intrinsic non-radiative recombination rate is high, reducing the external quantum efficiency droop effect at high current injection levels, and producing partially polarized LED output by inducing polarization-sensitive SP for coupling. Then, we report the theoretical and numerical study results of SP-dipole coupling based on a simple coupling model between a radiating dipole and the SP induced on a nearby Ag nanoparticle (NP). To include the dipole strength variation effect caused by the field distribution built in the coupling system (the feedback effect), the radiating dipole is represented by a saturable two-level system. The spectral and dipole-NP distance dependencies of dipole strength variation and total radiated power enhancement of the coupling system are demonstrated and interpreted. The results show that the dipole-SP coupling can enhance the total radiated power. The enhancement is particularly effective when the feedback effect is included and hence the dipole strength is increased.