Cocoa Butter: Evolution from Natural Food Ingredient to Pharmaceutical Excipient and Drug Delivery System.

For decades, cocoa butter has been extensively used in food industries, particularly in the production of chocolate confectioneries. The composition of fats within cocoa butter, such as stearic acid, palmitic acid, and oleic acid, determines its properties. Studies have indicated the existence of at least six polymorphic forms of cocoa butter, each possessing distinct characteristics and melting points. Recently, cocoa butter has garnered attention for its potential as a delivery system for pharmaceutical products. This review thoroughly explores cocoa butter, encompassing its production process, composition, properties, and polymorphism. It delves into its diverse applications across various industries including food, cosmetics, and pharmaceuticals. Additionally, the review investigates cocoa butter alternatives aiming to substitute cocoa butter and their roles in different drug delivery systems. The unique properties of cocoa butter have sparked interest in pharmaceutical industries, particularly since its introduction as a drug delivery system and excipient. This has prompted researchers and industry stakeholders to explore novel formulations and delivery methods, thereby expanding the range of options available to consumers in the pharmaceutical market.

Development of a novel direct compressible co-processed excipient and its application for formulation of Mirtazapine orally disintegrating tablets.

INTRODUCTION: Orally disintegrating tablets (ODTs) are designed to dissolve in the oral cavity within 3 min, providing a convenient option for patients as they can be taken without water. Direct compression is the most common method used for ODTs formulations. However, the availability of single composite excipients with desirable characteristics such as good compressibility, fast disintegration, and a good mouthfeel suitable for direct compression is limited. OBJECTIVE: This research was proposed to develop a co-processed excipient composed of xylitol, mannitol, and microcrystalline cellulose for the formulation of ODTs. METHODS: A total of 11 formulations of co-processed excipients with different ratios of ingredients were prepared, which were then compressed into ODTs, and their characteristics were thoroughly examined. The primary focus was on evaluating the disintegration time and hardness of the tablets, as these factors are important in ensuring the ODTs meet the desired criteria. The model drug, Mirtazapine was then incorporated into the chosen optimized formulation. RESULTS: The results showed that the formulation comprised of 10% xylitol, 10% mannitol and 80% microcrystalline cellulose demonstrated the fastest disintegration time (1.77 ± 0.119 min) and sufficient hardness (3.521 ± 0.143 kg) compared to the other formulations. Furthermore, the drug was uniformly distributed within the tablets and fully released within 15 min. CONCLUSION: Therefore, the developed co-processed excipients show great potential in enhancing the functionalities of ODTs, offering a promising solution to improve the overall performance and usability of ODTs in various therapeutic applications.

Cosmeceutical Therapy: Engaging the Repercussions of UVR Photoaging on the Skin's Circadian Rhythm.

Sunlight is an important factor in regulating the central circadian rhythm, including the modulation of our sleep/wake cycles. Sunlight had also been discovered to have a prominent influence on our skin's circadian rhythm. Overexposure or prolonged exposure to the sun can cause skin photodamage, such as the formation of irregular pigmentation, collagen degradation, DNA damage, and even skin cancer. Hence, this review will be looking into the detrimental effects of sunlight on our skin, not only at the aspect of photoaging but also at its impact on the skin's circadian rhythm. The growing market trend of natural-product-based cosmeceuticals as also caused us to question their potential to modulate the skin's circadian rhythm. Questions about how the skin's circadian rhythm could counteract photodamage and how best to maximize its biopotential will be discussed in this article. These discoveries regarding the skin's circadian rhythm have opened up a completely new level of understanding of our skin's molecular mechanism and may very well aid cosmeceutical companies, in the near future, to develop better products that not only suppress photoaging but remain effective and relevant throughout the day.

Fast Melt Cocoa Butter Tablet: Effect of Waxes, Starch, and PEG 6000 on Physical Properties of the Preparation.

A fast melt tablet (FMT) is well regarded as an alternative delivery system that might help resolve a patient's non-compliance issue. The main objective of this study was to develop a cocoa butter-based FMT. Additives, namely 5-15% of PEG 6000, beeswax, paraffin wax, and corn starch, were incorporated into the cocoa butter-based FMT to study the effects of these additives with the physical characteristic of a cocoa butter FMT. An optimum-based formulation was chosen according to the desired hardness and disintegration time and the taste masking property achieved with the model drug-dapoxetine. The analysis demonstrated that incorporating beeswax (15%) and paraffin wax (15%) could prolong the disintegration time by at least two-fold. On the contrary, the presence of corn starch was found to cause an increase in the hardness and reduction of the disintegration time. The disintegration mechanism might be presumed due to the synergistic effect of starch swelling and cocoa butter melting. The hardness value and in vitro disintegration time of the optimum formulation were recorded at 2.93 ± 0.22 kg and 151.67 ± 6.98 s. In terms of dissolution, 80% of dapoxetine was released within 30 min and the dissolution profile was comparable to the innovator product. The formulation was palatable and stable for at least 1 year. The exposure of the FMT formulation at 30 °C for 12 months was reported to be stable. Along with the sound palatability profile and high drug load capacity, the current formulation possesses the desired characteristics to be scaled up and marketed.

Cassia alata, Coriandrum sativum, Curcuma longa and Azadirachta indica: Food Ingredients as Complementary and Alternative Therapies for Atopic Dermatitis-A Comprehensive Review.

Traditional medicine is critical in disease treatment and management. Herbs are gaining popularity for disease management and treatment. Therefore, they can be utilised as complementary and alternative treatment (CAT) ingredients. Atopic dermatitis (AD) is one of the common non-communicable diseases. It is characterised by chronic inflammatory skin disease with intense pruritus and eczematous lesions. AD is associated with oxidative stress, microbial infection, and upregulation of inflammatory cytokines. Both children and adults could be affected by this skin disorder. The prevalence of AD is increasing along with the country's level of development. This review revisited the literature on four medicinal herbs widely used as complementary medicine to manage AD. These therapeutic herbs are commonly eaten as food and used as spices in Asian cuisine. The four food herbs reviewed are Cassia alata, Coriandrum sativum, Curcuma longa Linn, and Azadirachta indica. Their traditional uses and phytochemical content will be covered. Four relevant pharmacological and biological activities of the plants crucial in AD management have been reviewed and discussed, including anti-inflammatory, anti-microbial, antioxidant, and wound recovery.

General Health Benefits and Pharmacological Activities of Triticum aestivum L.

Common wheat (Triticum aestivum), one of the world's most consumed cereal grains, is known for its uses in baking and cooking in addition to its medicinal uses. As this plant's medical benefits are enormous and scattered, this narrative review was aimed at describing the pharmacological activities, phytochemistry, and the nutritional values of Triticum aestivum. It is a good source of dietary fiber, resistant starch, phenolic acids, alkylresorcinols, lignans, and diverse antioxidant compounds such as carotenoids, tocopherols and tocotrienols. These constituents provide Triticum aestivum with a wide range of pharmacological properties, including anticancer, antimicrobial, antidiabetic, hypolipemic, antioxidant, laxative, and moisturizing effects. This review summarized the established benefits of wheat in human health, the mode of action, and different clinical, in vitro and in vivo studies for different varieties and cultivars. This review also gives an insight for future research into the better use of this plant as a functional food. More clinical trials, in vivo and in vitro studies are warranted to broaden the knowledge about the effect of Triticum aestivum on nutrition-related diseases prevention, and physical and mental well-being sustenance.

Algae-Derived Anti-Inflammatory Compounds against Particulate Matters-Induced Respiratory Diseases: A Systematic Review.

Air pollution has recently become a subject of increasing concern in many parts of the world. The World Health Organization (WHO) estimated that nearly 4.2 million early deaths are due to exposure to fine particles in polluted air, which causes multiple respiratory diseases. Algae, as a natural product, can be an alternative treatment due to potential biofunctional properties and advantages. This systematic review aims to summarize and evaluate the evidence of metabolites derived from algae as potential anti-inflammatory agents against respiratory disorders induced by atmospheric particulate matter (PM). Databases such as Scopus, Web of Science, and PubMed were systematically searched for relevant published full articles from 2016 to 2020. The main key search terms were limited to "algae", "anti-inflammation", and "air pollutant". The search activity resulted in the retrieval of a total of 36 publications. Nine publications are eligible for inclusion in this systematic review. A total of four brown algae (Ecklonia cava, Ishige okamurae, Sargassum binderi and Sargassum horneri) with phytosterol, polysaccharides and polyphenols were reported in the nine studies. The review sheds light on the pathways of particulate matter travelling into respiratory systems and causing inflammation, and on the mechanisms of actions of algae in inhibiting inflammation. Limitations and future directions are also discussed. More research is needed to investigate the potential of algae as anti-inflammatory agents against PM in in vivo and in vitro experimental models, as well as clinically.

Stability indicating HPLC method for simultaneous quantification of sildenafil citrate and dapoxetine hydrochloride in Pharmaceutical products.

A stability-indicating HPLC-UV method for the simultaneous determination of sildenafil citrate and dapoxetine hydrochloride in solution and tablet was developed. The mobile phase was comprised of acetonitrile and 0.2M ammonium acetate buffer. The analyte was eluted at 3.392min and 7.255min for sildenafil citrate and dapoxetine HCl respectively using gradient system at a flow rate of 1.5mL/min. The theoretical plates count was>2000, tailing factor <.30, capacity factor 3.19-7.58 and peak asymmetry factor <.08.The method was linear from 5-180 and 1-40µg/mL with a correlation coefficient of 0.9999 and 0.9994 for sildenafil citrate and dapoxetine HCl respectively. The drug solution was stable at ambient room temperature (26˚C) for 48hours.Both drugs were found susceptible to oxidation and the drug content dropped slightly in acid and alkali condition but stable under UV light and heat. No interference from tablet excipients and degradation products was found.

Application of freeze-drying technology in manufacturing orally disintegrating films.

Freeze drying technology has not been maximized and reported in manufacturing orally disintegrating films. The aim of this study was to explore the freeze drying technology in the formulation of sildenafil orally disintegrating films and compare the physical properties with heat-dried orally disintegrating film. Central composite design was used to investigate the effects of three factors, namely concentration of carbopol, wheat starch and polyethylene glycol 400 on the tensile strength and disintegration time of the film. Heat-dried films had higher tensile strength than films prepared using freeze-dried method. For folding endurance, freeze-dried films showed improved endurance than heat-dried films. Moreover, films prepared using freeze-dried methods were thicker and had faster disintegration time. Formulations with higher amount of carbopol and starch showed higher tensile strength and thickness whereas formulations with higher PEG 400 content showed better flexibility. Scanning electron microscopy showed that the freeze-dried films had more porous structure compared to the heat-dried film as a result of the release of water molecule from the frozen structure when it was subjected to freeze drying process. The sildenafil film was palatable. The dissolution profiles of freeze-dried and heat-dried films were similar to Viagra® with f2 of 51.04 and 65.98, respectively.

Simultaneous quantification of sildenafil and N-desmethyl sildenafil in human plasma by UFLC coupled with ESI-MS/MS and pharmacokinetic and bioequivalence studies in Malay population.

A simple, rapid, specific and reliable UFLC coupled with ESI-MSMS assay method to simultaneously quantify sildenafil and N-desmethyl sildenafil, with loperamide as internal standard, was developed. Chromatographic separation was performed on a Thermo Scientific Accucore C18 column with an isocratic mobile phase composed of 0.1% v/v formic acid in purified water-methanol (20:80, v/v), at a flow rate of 0.3 mL/min. Sildenafil, N-desmethyl sildenafil and loperamide were detected with proton adducts at m/z 475.4 > 58.2, 461.3 > 85.2 and 477.0 > 266.1 in multiple reaction monitoring positive mode, respectively. Both analytes and internal standard were extracted by diethyl ether. The method was validated over a linear concentration range of 10-800 ng/mL for sildenafil and 10-600 ng/mL for N-desmethyl sildenafil with correlation coefficient (r(2) ) ≥0.9976 for sildenafil and (r(2) ) ≥0.9992 for N-desmethyl sildenafil. The method was precise, accurate and stable. The proposed method was applied to study the bioequivalence between a 100 mg dose of two pharmaceutical products: Viagra (original) and Edyfil (generic) products. AUC0-t , Cmax and Tmax were 2285.79 ng h/mL, 726.10 ng/mL and 0.94 h for Viagra and 2363.25 ng h/mL, 713.91 ng/mL and 0.83 hour for Edyfil. The 90% confidence interval of these parameters of this study fall within the regulatory range of 80-125%, hence they are considered as bioequivalent.

Taste-masked and affordable donepezil hydrochloride orally disintegrating tablet as promising solution for non-compliance in Alzheimer's disease patients.

CONTEXT: Manufacturing process and superdisintegrants used in orally disintegrating tablet (ODT) formulation are often time discussed. However, the effect of suitable filler for ODT formulation is not explored thoroughly. OBJECTIVE: The aim of this study was to develop a novel taste masked and affordable donepezil hydrochloride ODT with fast disintegration time and stable to improve medication compliance of Alzheimer's disease patient. METHODS AND MATERIALS: The ODT was manufactured using simple wet-granulation method. Crospovidone XL-10 was used as superdisintegrant and optimization was done by comparing the effect of three grades of lactose monohydrate compound as filler: Starlac®, Flowlac® and Tablettose®. RESULTS AND DISCUSSION: Formulations containing higher amount of colloidal silicon dioxide showed increase in hardness, weight, disintegration time and wetting time after stability study. Formulation E which containing 50% of Starlac® was found with shortest in vitro disintegration time (21.7 ± 1.67 s), in vivo disintegration time (24.0 ± 1.05 s) and in vitro disintegration time in artificial salvia (22.5 ± 1.67 s). Physical stability studies at 40 °C/75% RH for 6 months, Fourier transform infrared spectroscopy analysis and X-ray diffraction results showed that the formulation was stable. The drug-released profile showed that 80% of donepezil hydrochloride was released within 1 min. A single-dose, fasting, four-period, seven-treatment, double-blinded study involving 16 healthy human volunteers was performed to evaluate the palatability of ODT. Formulation VII containing 10 mg of ammonium glycyrrhizinate was able to mask the bitter taste of the drug. CONCLUSION: The product has the potential to be commercialized and it might serve as solution for non-compliance among the Alzheimer's disease patients.

Randomized two-way cross-over bioequivalence study of two amoxicillin formulations and inter-ethnicity pharmacokinetic variation in healthy Malay volunteers.

The objectives of this study were to develop a new deproteinization method to extract amoxicillin from human plasma and evaluate the inter-ethnic variation of amoxicillin pharmacokinetics in healthy Malay volunteers. A single-dose, randomized, fasting, two-period, two-treatment, two-sequence crossover, open-label bioequivalence study was conducted in 18 healthy Malay adult male volunteers, with one week washout period. The drug concentration in the sample was analyzed using high-performance liquid chromatography (UV-vis HPLC). The mean (standard deviation) pharmacokinetic parameter results of Moxilen® were: peak concentration (Cmax ), 6.72 (1.56) µg/mL; area under the concentration-time graph (AUC0-8 ), 17.79 (4.29) µg/mL h; AUC0-∞ , 18.84 (4.62) µg/mL h. Those of YSP Amoxicillin® capsule were: Cmax , 6.69 (1.44) µg/mL; AUC0-8 , 18.69 (3.78) µg/mL h; AUC00-∞ , 19.95 (3.81) µg/mL h. The 90% confidence intervals for the logarithmic transformed Cmax , AUC0-8 and AUC0-∞ of Moxilen® vs YSP Amoxicillin® capsule was between 0.80 and 1.25. Both Cmax and AUC met the predetermined criteria for assuming bioequivalence. Both formulations were well tolerated. The results showed significant inter-ethnicity variation in pharmacokinetics of amoxicillin. The Cmax and AUC of amoxicillin in Malay population were slightly lower compared with other populations.

Improved protein deproteinization method for the determination of meloxicam in human plasma and application in pharmacokinetic study.

A simple, rapid, specific and reliable high-performance liquid chromatographic assay of meloxicam in human plasma has been developed using a C18 reversed-phase analytical column. Reversed-phase chromatography was conducted using a mobile phase of 0.02 potassium dihydrogen phosphate (adjusted to pH 2.7 with phosphoric acid)-acetonitrile-triethylamine (35:65:0.05, v/v) with UV detection at 354 nm. The drug in human plasma was deproteinized using a combination of methanol and chloroform. This method is simple, rapid and consistent with a high recovery of meloxicam in human plasma ranging from 93.29 to 111.09%. Regression analysis for the calibration plot for plasma standards obtained for the drug concentrations between (25-4000) ng/mL indicated excellent linearity (r ≥ 0.9997). The proposed method was applied to study the bioequivalence between Mobic (original) and Melocam (generic) products. The study was conducted on using two tablets (4 × 7.5 mg) of each of the commercial product and the reference standard in a two-way open randomized crossover design involving 20 volunteers. Area under the concentration-time curve, peak concentration (C(max)) and time to reach C(max) were 72,868.61 ng h/mL, 2133.93 ng/mL and 4.06 h for Mobic, and 78,352.52 ng h/mL, 2525.18 ng/mL and 3.61 h for Melocam. Two C(max) were discovered in the pharmacokinetic profiles which confirm enterohepatic recirculation.

Effect of polymer, plasticizer and filler on orally disintegrating film.

CONTEXT: Difficulty in swallowing tablets or capsules has been identified as one of the contributing factors to non-compliance of geriatric patients. Although orally disintegrating tablet was designed for fast disintegration in mouth, the fear of taking solid tablets and the risk of choking for certain patient populations still exist. OBJECTIVE: The objective of this study was to develop and characterize orally disintegrating film (ODF), which was prepared using different combinations of polymers, plasticizers and fillers. MATERIALS AND METHODS: Effects of hydroxypropyl methylcellulose (HPMC), polyethylene glycol 400 (PEG 400), glycerin, polyvinyl pyrrolidone (PVP), mannitol and microcrystalline cellulose (MCC) on physical property of ODF formed were studied. The ODF was prepared using the solvent casting method. RESULTS: Increase in HPMC concentration formed ODF with greater tensile strength. Incorporation of plasticizer (PEG 400 and glycerin) reduced tensile strength but increased elasticity of the ODF formed. PVP increased both tensile strength and elasticity of the ODF. Increase in MCC:mannitol ratio reduced the tensile strength and elasticity of the ODF. Disintegration time of film decreased corresponding to decrease in tensile strength of the film. Formulation R with the optimum tensile strength (13.10 N/mm(2)), bending flexibility (40 times) and disintegration time (41.50 s) was chosen as final formulation. A total of 80% of the drug was released within five minutes and the ODF was stable at least for one year actual condition. CONCLUSION: An ODF containing donepezil HCl was developed and characterized. The donepezil HCl ODF has the potential to improve the compliance of Alzheimer disease patients.

Three-ways crossover bioequivalence study of cephalexin in healthy Malay volunteers.

CONTEXT: Although the general pharmacokinetics of cephalexin is quite established up-to-date, however, no population-based study on Cephalexin pharmacokinetics profile in Malay population has been reported yet in the literature. OBJECTIVE: The objective of this study was to investigate the pharmacokinetics and to compare the bioavailability of three cephalexin products, Ospexin® versus MPI Cephalexin® tablet and MPI Cephalexin® capsule, in healthy Malay ethnic male volunteers in Malaysia. MATERIAL AND METHOD: A single dose, randomized, fasting, three-period, three-treatment, three-sequence crossover, open label bioequivalence study was conducted in 24 healthy Malay adult male volunteers, with 1 week washout period. The drug concentration in the sample was analyzed using high performance liquid chromatography. RESULT: The mean (SD) pharmacokinetic parameter results of Ospexin® were Cmax, 17.39 (4.15) µg/mL; AUC0-6, 28.90 (5.70) µg/mL * h; AUC0-∞, 30.07 (5.94) µg/mL * h; while, those of MPI Cephalexin® tablet were Cmax, 18.29 (3.01) µg/mL; AUC0-6, 30.02 (4.80) µg/mL * h; AUC00-∞, 31.33 (5.18) µg/mL * h and MPI Cephalexin® capsule were Cmax, 18.25 (3.92) µg/mL; AUC0-6, 30.04 (5.13) µg/mL * h; AUC0-∞, 31.22 (5.29) µg/mL * h. CONCLUSION: The 90% confidence intervals for the logarithmic transformed Cmax, AUC0-6 and AUC0-∞, of Ospexin® versus MPI Cephalexin® tablet and Ospexin® versus MPI Cephalexin® capsule were between 0.80 and 1.25. Both Cmax and AUC met the predetermined criteria for assuming bioequivalence. The pharmacokinetic profile of cephalexin in Malay population does not vary much from other world population.

Stability indicating HPLC-UV method for determination of dapoxetine HCl in pharmaceutical product.

A stability-indicating HPLC-UV method for the determination of dapoxetine hydrochloride in solution and pharmaceutical product was developed. The mobile phase was composed of acetonitrile and 0.2 M ammonium acetate buffer at 50 : 50 ratio. The chromatographic parameters, theoretical plates (N), tailing factor (T), capacity factor (k') and peak asymmetry factor (As) were calculated. Stress degradation studies, namely, acid, alkali, oxidation, heat and UV light, were performed. The analyte was eluted at 5.8 min using gradient system at a flow rate of 1.5 mL/min. The theoretical plates count was > 2000, tailing factor < 1.54, capacity factor > 5.38 and peak asymmetry factor was < 1.10. The method was linear from 1 to 40 microg/mL with a correlation coefficient of 0.9994. The intraday precision and accuracy values were 0.14-1.54% and 0.63-1.83%, respectively. On the other hand, the interday precision and accuracy results were 0.49-1.83% and 1.15-1.85%, respectively. The drug solution was stable at ambient room temperature (26 degrees C) for 48 h. Dapoxetine HCI was found susceptible to oxidation and degraded slightly under acid and alkali conditions but was stable under UV light and heat. No interference from tablet excipiets and degradation products was found. Hence, the method can be employed as a stability-indicating method for the determination of dapoxetine HCl in pharmaceutical products.

Effect of deprotenizing agent and quantification of donepezil hydrochloride in human plasma.

The effect of deprotenizing agents on recovery of donepezil hydrochloride in the development of a simple, rapid, selective and sensitive high performance liquid chromatography method for quantification of donepezil hydrochloride in human plasma was described. The deprotenizing agents were comprised of, perchloric acid, methanol, acetonitrile, chloroform and their mixtures. The chromatographic separation was carried out using reversed phase C18 column (Agilent Eclipse Plus C18) with UV detection at 268 nm. The mobile phase was comprised of 0.01 M potassium dihydrogen phosphate buffer, methanol and acetronitrile (50:30:20, v/v) adjusted to pH 2.7 with phosphoric acid (80%). A combination of perchloric acid and methanol gave a cleaner sample with a good recovery of donepezil hydrochloride of above 96%. The method showed intraday precision and accuracy in the range of 6.82% to 1.5% and 3.13% to 1.12% respectively, while interday precision and accuracy ranged between 1.06% to 4.71% and 13.01% to 6.43% respectively. The standard calibration curve was linear from 30ng/mL to 4000ng/mL, with a correlation coefficient of 0.9965±0.0034. The retention time of donepezil was 5.9 min with a run time of 7.0 min. The method can be applied to analyze large batch plasma samples in pharmacokinetic studies.

Fabrication and characterization of cocoa butter-based caffeine fast-melting tablets.

Aim: The objective of this study was to develop and characterize the physical properties of fast-melting tablets (FMTs) using cocoa butter as the base and caffeine as the model drug. Method: The simple refrigerator freezing method was employed to prepare caffeine-loaded, FMTs from cocoa butter bases. Results: The F3 chosen formulation achieved a disintegration time of 1.20 min ± 0.035, which falls within the specified limit set by the European Pharmacopoeia. The cumulative drug release data of F3, was 88.52 and 94.08% within 60 and 75 min, respectively (NLT 85% as per US FDA requirement). All the other physical test standards for FMTs met the pharmacopeial specifications. Conclusion: Based on the findings, the simple refrigerator freezing method could be used to formulate FMTs.

Patient-friendly natural caffeine-loaded cocoa butter-based fast-melting tablets with rapid disintegration, affordability, safety and biocompatibility are an efficient base for drug delivery.

RP-HPLC analytical method development and optimization for quantification of donepezil hydrochloride in orally disintegrating tablet.

An easy, fast and validated RV-HPLC method was invented to quantify donepezil hydrochloride in drug solution and orally disintegrating tablet. The separation was carried out using reversed phase C-18 column (Agilent Eclipse Plus C-18) with UV detection at 268 nm. Method optimization was tested using various composition of organic solvent. The mobile phase comprised of phosphate buffer (0.01M), methanol and acetonitrile (50:30:20, v/v) adjusted to pH 2.7 with phosphoric acid (80%) was found as the optimum mobile phase. The method showed intraday precision and accuracy in the range of 0.24% to -1.83% and -1.83% to 1.99% respectively, while interday precision and accuracy ranged between 1.41% to 1.81% and 0.11% to 1.90% respectively. The standard calibration curve was linear from 0.125 µg/mL to 16 µg/mL, with correlation coefficient of 0.9997±0.00016. The drug solution was stable under room temperature at least for 6 hours. System suitability studies were done. The average plate count was > 2000, tailing factor <1, and capacity factor of 3.30. The retention time was 5.6 min. The HPLC method was used to assay donepezil hydrochloride in tablet and dissolution study of in-house manufactured donepezil orally disintegrating tablet and original Aricept.

Compounding and Characterization of Oral Disintegrating Films Containing Memantine Hydrochloride for Geriatrics.

Memantine hydrochloride is commonly prescribed for Alzheimer's disease and vascular dementia. However, the drug is only available in tablet form, a dosage form which is difficult for geriatrics to swallow. This problem is especially difficult for those patients diagnosed with Alzheimer's. This study was therefore aimed to develop and characterize an oral disintegrating film containing memantine hydrochloride using different types and concentrations of polymers. Using the solvent casting method, twelve formulations were developed, which involved manipulations on the type and concentration of the polymer. Afterwards, six formulations were selected to undergo characterization tests. These tests evaluated the films' tensile strength, Young's Modulus, percent elongation, folding endurance, disintegration and dissolution time, content uniformity, moisture loss, and moisture uptake. Polymers such as polyvinyl alcohol, hydroxypropyl methylcellulose, polyvinyl pyrrolidone, and pullulan gum were respectively incorporated at different concentrations. The study found that only hydroxypropyl methylcellulose and polyvinyl alcohol formulations developed into acceptable oral disintegrating films. Formulation E (hydroxypropyl methylcellulose 50-mg/film), which exhibited optimal mechanical strength, fast disintegration and dissolution, and excellent content uniformity, was identified as the best formula. Although polyvinyl alcohol showed higher mechanical strength, hydroxypropyl methylcellulose films were better at fulfilling the optimal characteristics of an oral disintegrating film. The study showed that the mechanical strength increased proportionally to the polymer concentration in the polyvinyl alcohol film. However, for the hydroxypropyl methylcellulose film, the mechanical strength increased only when hydroxypropyl methylcellulose's concentration was increased from a 40-mg/film to a 50-mg/film but decreased with a 60-mg/film. To summarize, orally disintegrating films containing memantine hydrochloride was developed, characterized, and reasoned to have high potential to be marketed and to increase medication compliance among geriatrics suffering from Alzheimer's disease.