Engineering an Almost All-Waterborne System for Transparent yet Superhydrophobic Surfaces with High Liquid Impalement Resistance.

Realistically, green manufacturing of transparent superhydrophobic surfaces (SHSs) and high liquid impalement resistance for outdoor engineering are very necessary but pretty challenging. To address this, an almost all-waterborne system composed of synthesized partially open-cage fluorinated polyhedral oligomeric silsesquioxane bearing a pair of -OH (poc-FPOSS-2OH), silica sol, and resin precursor is engineered. The transparent SHSs facilely formed by this system are featured with the exclusive presence of wrapped silica nanoparticle (SiNP) dendritic networks at solid-gas interfaces. The wrapped SiNP dendritic networks have a small aggregation size and low distribution depth, making SHSs highly transparent. The Si-O polymeric wrappers render mechanical flexibility to SiNP dendritic networks and thus enable transparent SHSs to resist high-speed water jet impinging with a Weber number of ≥19 800 in conjunction with the extremely low-surface-energy poc-FPOSS-2OH, which is the highest liquid impalement resistance so far among waterborne SHSs, and can rival the state-of-the-art solventborne SHSs.

Poly(2-hydroxyethyl methacrylate-co-quaternary ammonium salt chitosan) hydrogel: A potential contact lens material with tear protein deposition resistance and antimicrobial activity.

Tear protein deposition resistance and antimicrobial property are two challenges of conventional poly(2-hydroxyethyl methacrylate) (pHEMA) contact lenses. In this work, we developed a poly(2-hydroxyethyl methacrylate-co-quaternary ammonium salt chitosan) hydrogel, named as p(HEMA-co-mHACC) hydrogel, using acryloyl HACC (mHACC) as a macromolecular crosslinker. With increasing the acryloyl substitution degree (14-29%) or mHACC content (2-11%), the hydrogel showed an enhanced tensile strength (432-986 kPa) and Young's modulus (360-1158 kPa), a decreased elongation at break (242-84%), and an increased visible light transmittance (0-95%). At an optimal acryloyl substitution degree of 26%, with the increase of mHACC content from 2% to 11%, p(HEMA-co-mHACC) hydrogel presented a decreased water contact angle from 84.6 to 55.3 degree, an increased equilibrium water content from 38% to 45%, and an enhanced oxygen permeability from 8.5 to 13.5 barrer. Due to the enhancement in surface hydrophilicity and electropositivity, p(HEMA-co-mHACC) hydrogel remarkably reduced the deposition of lysozyme, but little affected the adsorption of BSA, depending on the hydrophilic/hydrophobic and electrostatic interactions. The antimicrobial test against Staphylococcus aureus and Escherichia coli showed that p(HEMA-co-mHACC) hydrogel presented an 8-32 times higher germicidal ability than pHEMA hydrogel, indicative of a better antimicrobial activity. The in vitro cell culture of mouse NIH3T3 fibroblasts and immortalized human keratinocytes showed that p(HEMA-co-mHACC) hydrogel was non-toxic. Thus, p(HEMA-co-mHACC) hydrogel with tear protein deposition resistance and antimicrobial activity is a potential candidate for contact lenses.

Strategy toward fluorinated polyhedral oligomeric silsesquioxane wrapping nanoparticles for superomniphobic surfaces.

For engineering implementation of an ultralow-surface-energy hierarchically micro/nanostructured topography for superomniphobic surfaces, a strategy involving the design of a partially open-cage fluorinated polyhedral oligomeric silsesquioxane bearing an -OH pair (poc-F13POSS-2OH) and the subsequent wrapping of nanoparticles with poc-F13POSS-2OH as a result of weak-acid-triggered -OH protonation is developed. The poc-F13POSS-wrapped nanoparticle-based surfaces showed broad-spectrum superomniphobicity. This work has advanced the engineering of state-of-the-art superomniphobic solid surfaces/interfaces.

Poly(2-hydroxyethyl methacrylate)/ß-cyclodextrin-hyaluronan contact lens with tear protein adsorption resistance and sustained drug delivery for ophthalmic diseases.

A series of poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogels containing cross-linked ß-cyclodextrin-hyaluronan (ß-CD-crHA), with tear protein adsorption resistance and sustained drug delivery, were developed as contact lens materials for eye diseases. ß-CD-HA was synthesized from aminated ß-CD and HA and then crosslinked within pHEMA hydrogel using polyethylenimine as a crosslinker. The synthesized ß-CD-HA was characterized by 1H NMR analysis, and ß-CD-crHA immobilized in pHEMA hydrogel was confirmed by FT-IR, SEM, and AFM analyses. The incorporation of ß-CD-crHA significantly improved the surface hydrophilicity, water uptake ability, oxygen permeability, and flexibility of pHEMA hydrogel, but did not compromise light transmission. pHEMA/ß-CD-crHA hydrogels not only decreased the tear protein adsorption because of the electrostatically mutual repulsion and the improved hydrophilicity, leading to the reduced adhesion of Staphylococcus aureus on the hydrogel surface, but also enhanced the encapsulation capacity and the sustainable delivery of diclofenac due to the formation of inclusion complexes between ß-CD and drugs. All the hydrogels were nontoxic to 3T3 mouse fibroblasts by in vitro cell viability analysis. Among these hydrogels with different ß-CD-crHA contents, pHEMA/ß-CD-crHA10 hydrogel showed the lowest water contact angle of 52 °, the highest water content of 65%, the largest Dk value of 36.4 barrer, and the optimal modulus of 1.8 MPa, as well as a good light transmission of over 90%. The in vivo conjunctivitis treatment of rabbits for 72 h indicated that drug-loaded pHEMA/ß-CD-crHA10 hydrogel presented a better therapeutic effect than both one dose administration of drug solution per day and drug-loaded pHEMA hydrogel. Thus, pHEMA/ß-CD-crHA10 hydrogel is a promising contact lens material for ophthalmic diseases. STATEMENT OF SIGNIFICANCE: Topical eye drops are currently the most popular treatment for ophthalmic diseases, but frequent dosing is necessary to acquire the desirable clinical effect at the expense of systemic side-effects. Drug-loaded contact lenses, as an alternative of eye drops, possess many good performances and show potential applications. However, the sustained drug delivery and the tear protein adsorption resistance are still challenging for contact lenses. Hence, we developed a novel pHEMA/ß-CD-crHA hydrogel by incorporating ß-CD-crHA crosslinked network into pHEMA hydrogel. Besides the improvements in surface hydrophilicity, water uptake ability, oxygen permeability, and flexibility, pHEMA/ß-CD-crHA hydrogel also reduced the adsorption of tear proteins and the adhesion of Staphylococcus aureus, enhanced the drug encapsulation, and prolonged the drug delivery, with better effect in the conjunctivitis treatment of rabbits. Thus, pHEMA/ß-CD-crHA hydrogel is a potential contact lens material for treating ophthalmic diseases.

CaCO3 nanoparticles pH-sensitively induce blood coagulation as a potential strategy for starving tumor therapy.

Based on the concept of starving tumor therapy, in this study we put forward a new idea that the pH-sensitive Ca2+ delivery of calcium carbonate nanoparticles (CaCO3 NPs) induced blood coagulation of tumor vessels, and first explored the effect of CaCO3 NPs on the in vitro and in vivo blood coagulation by acid stimulus. CaCO3 NPs with a size of about 100 nm and a porous structure of several nanometers were synthesized in an emulsion system, which showed a high loading capacity (49%) of doxorubicin hydrochloride (DOX) with an encapsulation efficiency of 98% and a pH-sensitive drug delivery. The hemolysis test showed that CaCO3 NPs were blood compatible. The in vitro Ca2+ delivery and blood clotting tests indicated that CaCO3 NPs pH-sensitively released Ca2+, and caused rapid blood coagulation at pH 5.0 but no thrombus at pH 7.4. Confocal laser scanning microscopy showed that after uptake by MCF-7 or MDA-MB-231 breast cancer cells, CaCO3 NPs mainly distributed in endosomes/lysosomes within the initial 2 h and then decomposed by acid stimulus, leading to the intracellular delivery of Ca2+ that subsequently migrated outside the cells. CaCO3 NPs were nontoxic to NIH3T3 mouse fibroblasts, but highly toxic to both MCF-7 and MDA-MB-231 cells after loading DOX. After topical administration into the breast tumors of mice, CaCO3 NPs evoked significant thrombosis and hemorrhage of tumor vasculature by hematoxylin-eosin and Masson's trichrome staining. These results indicated that CaCO3 NPs could induce blood coagulation via acid stimulus, showing potential applications in blocking tumor vessels for starving tumor therapy.

An alginate/poly(N-isopropylacrylamide)-based composite hydrogel dressing with stepwise delivery of drug and growth factor for wound repair.

Anti-inflammation and angiogenesis play an essential role in wound healing. In this study, we developed a composite hydrogel dressing with stepwise delivery of diclofenac sodium (DS) and basic fibroblast growth factor (bFGF) in the inflammation stage and new tissue formation stage respectively for wound repair. Sodium alginate (SA) crosslinked by calcium ion acted as the continuous phase, and thermosensitive bFGF-loaded poly(N-isopropylacrylamide) nanogels (pNIPAM NGs, LCST1 ~33 °C) and DS-loaded p(N-isopropylacrylamide-co-acrylic acid) nanogels [p(NIPAM-co-AA) NGs, LCST2 ~40 °C] acted as the dispersed phase. The synthesized SA/bFGF@pNIPAM/DS@p(NIPAM-co-AA) hydrogel presented a desirable storage modulus of ~4500 Pa, a high water equilibrium swelling ratio of ~90, an appropriate water vapor transmission rate of ~2300 g/m2/day, and nontoxicity to human skin fibroblasts. The in vitro thermosensitive cargo delivery of this hydrogel showed that 92% of DS was sustainably delivered at 37 °C within the early three days mimicking the inflammation stage, while 80% of bFGF was controlled released at 25 °C within the later eight days mimicking new tissue formation stage. The in vivo wound healing of rats showed that this composite hydrogel presented a better healing effect with a wound contraction of 96% at 14 d, less inflammation and higher angiogenesis, than all control groups. These findings indicate SA/bFGF@pNIPAM/DS@p(NIPAM-co-AA) composite hydrogel is a potential dressing for wound repair.