Rapid Yet Efficient Reduction of Graphene Oxide Triggered by Semi-Molten Metals.

Reduced graphene oxide (rGO) has garnered extensive attention as electrodes, sensors, and membranes, necessitating the efficient reduction of graphene oxide (GO) for optimal performance. In this work, a swift reduction of GO that involves bringing GO foam in contact with semi-molten metals like tin (Sn) and lithium (Li) is presented. These findings reveal that the electrical resistance of GO foam is significantly diminished by its interaction with these metals, even in dry air. Taking inspiration from this technique, Sn foil is employed to encase the GO foam, followed by a calcination in 15 vol% H2 /Ar environment at 235 °C to fabricate the rGO, which demonstrates a remarkably lower electrical resistivity of 0.42 Ω cm when compared to the chemically reduced GO via hydrazine hydrate (650 Ω cm). The reduction mechanism entails the migration of Sn on GO and its subsequent reaction with oxygen functional groups. SnO/Sn(OH)2 formed from the reaction can be subsequently reversed through reduction by H2 to Sn. Utilizing this rGO as the host material for a sulfur cathode, a lithium-sulfur battery is constructed that displays a specific capacity of 1146 mAh g-1 and maintains a capacity retention of 68.4% after 300 cycles at a rate of 0.2 C.

A general Lewis acidic etching route for preparing MXenes with enhanced electrochemical performance in non-aqueous electrolyte.

Two-dimensional carbides and nitrides of transition metals, known as MXenes, are a fast-growing family of materials that have attracted attention as energy storage materials. MXenes are mainly prepared from Al-containing MAX phases (where A = Al) by Al dissolution in F-containing solution; most other MAX phases have not been explored. Here a redox-controlled A-site etching of MAX phases in Lewis acidic melts is proposed and validated by the synthesis of various MXenes from unconventional MAX-phase precursors with A elements Si, Zn and Ga. A negative electrode of Ti3C2 MXene material obtained through this molten salt synthesis method delivers a Li+ storage capacity of up to 738 C g-1 (205 mAh g-1) with high charge-discharge rate and a pseudocapacitive-like electrochemical signature in 1 M LiPF6 carbonate-based electrolyte. MXenes prepared via this molten salt synthesis route may prove suitable for use as high-rate negative-electrode materials for electrochemical energy storage applications.

Nanoporous carbon for electrochemical capacitive energy storage.

The urgent need for efficient energy storage devices has stimulated a great deal of research on electrochemical double layer capacitors (EDLCs). This review aims at summarizing the recent progress in nanoporous carbons, as the most commonly used EDLC electrode materials in the field of capacitive energy storage, from the viewpoint of materials science and characterization techniques. We discuss the key advances in the fundamental understanding of the charge storage mechanism in nanoporous carbon-based electrodes, including the double layer formation in confined nanopores. Special attention will be also paid to the important development of advanced in situ analytical techniques as well as theoretical studies to better understand the carbon pore structure, electrolyte ion environment and ion fluxes in these confined pores. We also highlight the recent progress in advanced electrolytes for EDLCs. The better understanding of the charge storage mechanism of nanoporous carbon-based electrodes and the rational design of electrolytes should shed light on developing the next-generation of EDLCs.

3D Nitrogen-Doped Graphene Encapsulated Metallic Nickel-Iron Alloy Nanoparticles for Efficient Bifunctional Oxygen Electrocatalysis.

Invited for the cover of this issue is Liqiang Mai and co-workers at Wuhan University of Technology. The image depicts Ni3 Fe alloy nanoparticles encapsulated in N-doped graphene as an efficient bifunctional oxygen electrocatalyst toward rechargeable Zn-air batteries, which is expected to drive the electric vehicle. Read the full text of the article at 10.1002/chem.201904722.

3D Nitrogen-Doped Graphene Encapsulated Metallic Nickel-Iron Alloy Nanoparticles for Efficient Bifunctional Oxygen Electrocatalysis.

It is extremely desirable to explore high-efficient, affordable and robust oxygen electrocatalysts toward rechargeable Zn-air batteries (ZABs). A 3D porous nitrogen-doped graphene encapsulated metallic Ni3 Fe alloy nanoparticles aerogel (Ni3 Fe-GA1 ) was constructed through a facile hydrothermal assembly and calcination process. Benefiting from 3D porous configuration with great accessibility, high electrical conductivity, abundant active sites, optimal nitrogen content and strong electronic interactions at the Ni3 Fe/N-doped graphene heterointerface, the obtained aerogel showed outstanding catalytic performance toward the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Specifically, it exhibited an overpotential of 239 mV to attain 10 mA cm-2 for OER, simultaneously providing a positive onset potential of 0.93 V within a half-wave potential of 0.8 V for ORR. Accordingly, when employed in the aqueous ZABs, Ni3 Fe-GA1 achieved higher power density and superior reversibility than Pt/C-IrO2 catalyst, making it a potential candidate for rechargeable ZABs.

Enabling Flexible Heterostructures for Li-Ion Battery Anodes Based on Nanotube and Liquid-Phase Exfoliated 2D Gallium Chalcogenide Nanosheet Colloidal Solutions.

2D metal chalcogenide (MC) nanosheets (NS) have displayed high capacities as lithium-ion battery (LiB) anodes. Nevertheless, their complicated synthesis routes coupled with low electronic conductivity greatly limit them as promising LiB electrode material. Here, this work reports a facile single-walled carbon nanotube (SWCNT) percolating strategy for efficiently maximizing the electrochemical performances of gallium chalcogenide (GaX, X = S or Se). Multiscaled flexible GaX NS/SWCNT heterostructures with abundant voids for Li+ diffusion are fabricated by embedding the liquid-exfoliated GaX NS matrix within a SWCNT-percolated network; the latter improves the electron transport and ion diffusion kinetics as well as maintains the mechanical flexibility. Consequently, high capacities (i.e., 838 mAh g-1 per gallium (II) sulfide (GaS) NS/SWCNT mass and 1107 mAh g-1 per GaS mass; the latter is close to the theoretical value) and good rate capabilities are achieved, which can be majorly attributed to the alloying processes of disordered Ga formed after the first irreversible GaX conversion reaction, as monitored by in situ X-ray diffraction. The presented approach, colloidal solution processing of SWCNT and liquid-exfoliated MC NS to produce flexible paper-based electrode, could be generalized for wearable energy storage devices with promising performances.

Degradation of sulfonamide antibiotic via UV/MgO2 system: kinetic, application, and mechanism.

In response to antibiotic residues in the water, a novel advanced oxidation technology based on MgO2 was used to remediate sulfamethazine (SMTZ) pollution in aquatic environments. Upon appropriate regulation, the remarkable removal efficiency of SMTZ was observed in a UV/MgO2 system, and the pseudo-first-order reaction constant reached 0.4074 min-1. In addition, the better performance of the UV/MgO2 system in a weak acid environment was discovered. During the removal of SMTZ, the pathways of SMTZ degradation were deduced, including nitration, ring opening, and group loss. In the mineralization exploration, the further removal of residual products of SMTZ by the UV/MgO2 system was visually demonstrated. The qualitative and quantitative researches as well as the roles of reactive species were valuated, which revealed the important role of ·O2-. Common co-existing substances in actual wastewater such as NO3- HA, Cl-, Fe2+, Co2+, and Mn2+ can slightly inhibit the degradation of SMTZ in the UV/MgO2 system. Finally, the capacity of efficient degradation of SMTZ in actual wastewater by the UV/MgO2 system was proved. The results indicated that the innovative UV/MgO2 system was of great practical application prospect in antibiotic residue wastewater remediation.

Ti3 C2 Tx MXene with High Pseudocapacitive Activity and Large Potential Window in a Mild AlCl3 Aqueous Electrolyte.

MXenes have been extensively explored as supercapacitor electrodes, especially in acidic aqueous electrolytes, where ultrahigh specific capacitance can be achieved; however, their narrow working potential window (≤ 1.0 V) limits the acquisition of high energy. Neutral and alkaline electrolytes can be used to extend the working potential window but MXenes in these electrolytes are less pseudocapacitive active, which leads to reduced charge storage. In this study, it is shown that Ti3 C2 Tx MXene in a mild AlCl3 aqueous electrolyte can operate at a wide potential range from 0 to -1.3 V versus Hg/Hg2 SO4 and retain high pseudocapacitive activity. Thus, a high capacity of up to 85 mAh g-1 is achieved, surpassing its performance in H2 SO4 electrolyte of 78 mAh g-1 . More interestingly, most of the capacity is released at a more negative potential range than that in acidic electrolytes, making it more suitable as a negative electrode material. In situ electrochemical quartz crystal microbalance results suggest that the high capacity originates from the pseudocapacitive intercalation/deintercalation of H+ instead of Al3+ , providing the possibility of coupling MXene anodes with proton redox active cathodes to achieve high-energy and high-power devices.

Biochemical and molecular characterization of a novel glycerol dehydratase from Klebsiella pneumoniae 2e with high tolerance against crude glycerol impurities.

BACKGROUND: The direct bioconversion of crude glycerol, a byproduct of biodiesel production, into 1,3-propanediol by microbial fermentation constitutes a remarkably promising value-added applications. However, the low activity of glycerol dehydratase, which is the key and rate-limiting enzyme in the 1,3-propanediol synthetic pathway, caused by crude glycerol impurities is one of the main factors affecting the 1,3-propanediol yield. Hence, the exploration of glycerol dehydratase resources suitable for crude glycerol bioconversion is required for the development of 1,3-propanediol-producing engineered strains. RESULTS: In this study, the novel glycerol dehydratase 2eGDHt, which has a tolerance against crude glycerol impurities from Klebsiella pneumoniae 2e, was characterized. The 2eGDHt exhibited the highest activity toward glycerol, with Km and Vm values of 3.42 mM and 58.15 nkat mg-1, respectively. The optimum pH and temperature for 2eGDHt were 7.0 and 37 °C, respectively. 2eGDHt displayed broader pH stability than other reported glycerol dehydratases. Its enzymatic activity was increased by Fe2+ and Tween-20, with 294% and 290% relative activities, respectively. The presence of various concentrations of the crude glycerol impurities, including NaCl, methanol, oleic acid, and linoleic acid, showed limited impact on the 2eGDHt activity. In addition, the enzyme activity was almost unaffected by the presence of an impurity mixture that mimicked the crude glycerol environment. Structural analyses revealed that 2eGDHt possesses more coil structures than reported glycerol dehydratases. Moreover, molecular dynamics simulations and site-directed mutagenesis analyses implied that the existence of unique Val744 from one of the increased coil regions played a key role in the tolerance characteristic by increasing the protein flexibility. CONCLUSIONS: This study provides insight into the mechanism for enzymatic action and the tolerance against crude glycerol impurities, of a novel glycerol dehydratase 2eGDHt, which is a promising glycerol dehydratase candidate for biotechnological conversion of crude glycerol into 1,3-PDO.

Self-assembly construction of 1D carbon nitride nanotubes and cobalt-modified for superior photocatalytic degradation of sulfonamide antibiotics.

In the present work, a cobalt-doped carbon nitride nanotubes (Co-CNt) was synthesized via self-assembly process. Contributed to the narrow band gap, enlarged specific surface area and abundant active sites, Co-CNt has excellent photoelectric properties and superior performance than pristine CN in sulfisoxazole (SIZ) degradation under blue light irradiation, which achieved 100% removal within 40 min. Meanwhile, the system not only exhibited practical applicability by efficiently degrading SIZ, but also generating high levels of H2O2. Moreover, the Co-CNt/visible light system shows superior operability over a wide pH range, micro-concentration contaminants, various anions, water matrices and other sulfonamides with promising catalytic stability and applicability. The contribution of RSs in the degradation process were elucidated based on radical scavenging and spin-trapped tests, clarifying that O2·- and h+ majorly dominated the process. In addition, 4 probable degradation pathways of SIZ were provided and the generated intermediates' toxicity were evaluated. Overall, this study successfully synthesized a self-assembled 1D tubular photocatalyst with Co-doped and demonstrated the potential Co-CNt/visible light system for environmental remediation, providing a promising approach for the development of photocatalysis.

Effects of Different Running Intensity on Serum Levels of IL-6 and TNF-α in Patients with Early Knee Osteoarthritis.

OBJECTIVE: To investigate the effects of different running intensities on interleukin-6 (IL-6) and tumor necrosis factor-α (TNF-α) in patients with early knee osteoarthritis (KOA). STUDY DESIGN: Clinical comparative study. PLACE AND DURATION OF STUDY: Department of Orthopedics, Longyan First Affiliated Hospital of Fujian Medical University, Fujian, China, from January 2019 to January 2021. METHODOLOGY: A total of 131 patients with early KOA admitted to Longyan First Hospital Affiliated to Fujian Medical University from January 2019 to January 2021 were selected and randomly divided into four groups using the random number table method: Group A (static control group, 34 cases), Group B (walking group, 32 cases), Group C (brisk walking group, 32 cases), and Group D (jogging group, 33 cases), and the training duration of the four groups was 6 months. Moreover, the levels of IL-6 and TNF-α, the activity of daily living (ADL), Fugl-Meyer assessment scale (FMA) scores, and adverse events before and after training were compared between the four groups. RESULTS: No statistical significance was observed in the differences of TNF-α, IL-6, ADL-advanced ability, ADL-basic ability, FMA-upper limb, and FMA-lower limb among the four groups before training (p>0.05). After training, the levels of TNF-α and IL-6 of the four groups were decreased, while the scores of FMA and ADL were increased. Group C had the highest FMA-upper limb and FMA-lower limb scores, ADL- advanced ability and ADL-basic ability after training, which were higher than those in groups A, B, and D (p<0.05). No statistical significance could be observed in the difference in the adverse event rate among the four groups during training (X2=3.339, p>0.05). CONCLUSION: Exercise training of different intensities, such as slow walking, brisk walking, and jogging, is touted to enhance the overall recovery of patients with early KOA. The exercise intensity of brisk walking training is moderate, and the activity of daily living and exercise ability of patients are significantly improved after training, while the levels of TNF-α and IL-6 are obviously decreased. KEY WORDS: Knee osteoarthritis, Interleukin-6, Exercise training, Exercise intensity, Tumor necrosis factor α.

Synthesis of MAX Phase Nanofibers and Nanoflakes and the Resulting MXenes.

Layered ternary carbides and nitrides, also known as MAX phases, have attracted enormous attention for many applications, especially as precursors to produce 2D metal carbides and nitrides called MXenes. However, it is still challenging to tune and control the shape/morphology of MAX phase particles at the nanoscale, as they are typically manufactured as large grains using ceramic technology. Herein, nanostructured Ti-Al-C MAX phases with fine-tuned morphology of nanofibers and nanoflakes are prepared by using 1D and 2D carbon precursors at a synthesis temperature of 900 °C. The nanostructured MAX phases are used as precursors to produce nanosized multilayered MXenes, with a considerably shorter etching time and a low reaction temperature. These nanosized MXenes exhibit good electrochemical lithium-ion storage properties and a pseudocapacitive electrochemical signature. The obtained Ti2 CTx MXene electrode can deliver delithiation capacity of 300 mAh g-1 at low rates and 100 mAh g-1 when the lithiation/delithiation cycle happens within 30 s. Availability of nanoscale MAX phases and MXene nanoflakes with small lateral size may open new opportunities for both classes of materials.

Perovskite-Type SrVO3 as High-Performance Anode Materials for Lithium-Ion Batteries.

Perovskite-type oxides, characterized by excellent multifunctional physical and chemical properties, are widely used in ferroelectric, piezoelectric, energy conversion, and storage applications. It is shown here that the perovskite-type SrVO3 can achieve excellent electrochemical performance as lithium-ion battery anodes thanks to its high electrically and ionically conductivity. Conducting additive-free SrVO3 electrodes can deliver a high specific capacity of 324 mAh g-1 at a safe and low average working potential of ≈0.9 V vs Li/Li+ together with excellent high-rate performance. A high areal capacity of ≈5.4 mAh cm-2 is obtained using an ultrathick (≈120 µm) electrode. Moreover, the fully lithiated SrVO3 electrode exhibits only 2.3% volume expansion that is explained by a simple solid-solution Li+ -storage mechanism, resulting in good cycling stability of the electrode. This study highlights the perovskite-type SrVO3 as a promising Li+ -storage anode and provides opportunities for exploring a variety of perovskite oxides as next-generation metal-ion battery anodes.

Boosting the lithium-ion storage performance of perovskite SrxVO3-δ via Sr cation and O anion deficient engineering.

Perovskite SrVO3 has been investigated as a promising lithium storage anode where the V cation plays the role of the redox center, combining excellent cycle stability and safe operating potential versus Li metal plating, with limited capacity. Here, we demonstrate the possibility to boost the lithium storage properties, by reducing the non-redox active Sr cation content and fine-tuning the O anion vacancies while maintaining a non-stoichiometric SrxVO3-δ perovskite structure. Theoretical investigations suggest that Sr vacancy can work as favorable Li+ storage sites and preferential transport channels for guest Li+ ions, contributing to the increased specific capacity and rate performance. In contrast, inducing O anion vacancy in SrxVO3-δ can improve rate performance while compromising the specific capacity. Our experimental results confirm the enhancement of specific capacities by fine adjusting the Sr and O vacancies, with a maximum capacity of 444 mAh g-1 achieved with Sr0.63VO3-δ, which is a 37% increase versus stoichiometric SrVO3. Although rich defects have been induced, SrxVO3-δ electrodes maintain a stable perovskite structure during cycling versus a LiFePO4 cathode, and the full-cell could achieve more than 6000 discharge/charge cycles with 80% capacity retention. This result highlights the possibility to use the cation defective-based engineering approach to design high-capacity perovskite oxide anode materials.

Achieving ultrahigh electrochemical performance by surface design and nanoconfined water manipulation.

The effects of nanoconfined water and the charge storage mechanism are crucial to achieving the ultrahigh electrochemical performance of two-dimensional transition metal carbides (MXenes). We propose a facile method to manipulate nanoconfined water through surface chemistry modification. By introducing oxygen and nitrogen surface groups, more active sites were created for Ti3C2 MXene, and the interlayer spacing was significantly increased by accommodating three-layer nanoconfined water. Exceptionally high capacitance of 550 F g-1 (2000 F cm-3) was obtained with outstanding high-rate performance. The atomic scale elucidation of the layer-dependent properties of nanoconfined water and pseudocapacitive charge storage was deeply probed through a combination of 'computational and experimental microscopy'. We believe that an understanding of, and a manipulation strategy for, nanoconfined water will shed light on ways to improve the electrochemical performance of MXene and other two-dimensional materials.

Photoirradiation-Induced Capacitance Enhancement in the h-WO3/Bi2WO6 Submicron Rod Heterostructure under Simulated Solar Illumination and Its Postillumination Capacitance Enhancement Retainment from a Photocatalytic Memory Effect.

Recently, photoassisted charging has been demonstrated as a green and sustainable approach to successfully enhance the capacitance of supercapacitors with low cost and good efficiency. However, their light-induced capacitance enhancement is relatively low and is lost quickly when the illumination is off. In this work, a novel active material system is developed for supercapacitors with the photoassisted charging capability by the decoration of a small amount of Bi2WO6 nanoparticles on an h-WO3 submicron rod surface in situ, which forms a typical type II band alignment heterostructure with a close contact interface through the co-sharing of W atoms between h-WO3 submicron rods and Bi2WO6 nanoparticles. The photogenerated charge carrier separation and transfer are largely enhanced in the h-WO3/Bi2WO6 submicron rod electrode, which subsequently allows more charge carriers to participate in its photoassisted charging process to largely enhance its capacitance improvement under simulated solar illumination than that of the h-WO3 submicron rod electrode. Furthermore, the h-WO3/Bi2WO6 submicron rod electrode could retain its photoinduced capacitance enhancement in the dark for an extended period of time from the photocatalytic memory effect. Thus, our work provides a solution to the two major drawbacks of reported supercapacitors with the light-induced capacitance enhancement property, and supercapacitors based on active materials with the photocatalytic memory effect could be utilized in various technical fields.

Li-ion storage properties of two-dimensional titanium-carbide synthesized via fast one-pot method in air atmosphere.

Structural bidimensional transition-metal carbides and/or nitrides (MXenes) have drawn the attention of the material science research community thanks to their unique physical-chemical properties. However, a facile and cost-effective synthesis of MXenes has not yet been reported. Here, using elemental precursors, we report a method for MXene synthesis via titanium aluminium carbide formation and subsequent in situ etching in one molten salt pot. The molten salts act as the reaction medium and prevent the oxidation of the reactants during the high-temperature synthesis process, thus enabling the synthesis of MXenes in an air environment without using inert gas protection. Cl-terminated Ti3C2Tx and Ti2CTx MXenes are prepared using this one-pot synthetic method, where the in situ etching step at 700 °C requires only approximately 10 mins. Furthermore, when used as an active material for nonaqueous Li-ion storage in a half-cell configuration, the obtained Ti2CTx MXene exhibits lithiation capacity values of approximately 280 mAh g-1 and 160 mAh g-1 at specific currents of 0.1 A g-1 and 2 A g-1, respectively.

Electrochemical Lithium Storage Performance of Molten Salt Derived V2SnC MAX Phase.

MAX phases are gaining attention as precursors of two-dimensional MXenes that are intensively pursued in applications for electrochemical energy storage. Here, we report the preparation of V2SnC MAX phase by the molten salt method. V2SnC is investigated as a lithium storage anode, showing a high gravimetric capacity of 490 mAh g-1 and volumetric capacity of 570 mAh cm-3 as well as superior rate performance of 95 mAh g-1 (110 mAh cm-3) at 50 C, surpassing the ever-reported performance of MAX phase anodes. Supported by operando X-ray diffraction and density functional theory, a charge storage mechanism with dual redox reaction is proposed with a Sn-Li (de)alloying reaction that occurs at the edge sites of V2SnC particles where Sn atoms are exposed to the electrolyte followed by a redox reaction that occurs at V2C layers with Li. This study offers promise of using MAX phases with M-site and A-site elements that are redox active as high-rate lithium storage materials.

Electrochemical oxidation of methyl orange by a Magnéli phase Ti4O7 anode.

In this study, high quality Magnéli phase Ti4O7 bulks with electrical conductivity up to 961.5 S cm-1 were successfully prepared by spark plasma sintering (SPS) and then served as electrode materials for electrochemical oxidation of azo dye methyl orange (MO). The influences of current density and initial dye concentration on the removal rates of MO and chemical oxygen demand (COD) were studied. Removal of MO and COD exhibited an increase with increasing current density and decreasing initial concentration of MO. Complete removal of MO was realized within a short time under all experimental conditions. The removal rate of COD reached 91.7% when current density was 10 mA cm-2 and initial dye concentration was 100 mg L-1. In addition, the electrochemical oxidation rate could be described through a pseudo-first-order kinetic constant k, and the obtained experimental results could be well fitted with a proposed kinetic model in all the examined conditions. Possible degradation mechanisms for electrochemical oxidation of MO by Ti4O7 electrode were proposed on the basis of intermediate products analysis. Tests were also conducted with other commercial electrodes for comparison, including commercial graphite, stainless-steel and dimension stable anode (DSA) electrodes. The results showed that Ti4O7 anode exhibited the fastest electrochemical oxidation rates than those of the other electrodes. This study provides a feasible method for realizing high efficiency of electrochemical oxidation degradation by Ti4O7 electrode.