RESUMEN
As a sustainable and promising approach of removing of nitrogen oxides (NOx), catalytic reduction of NOx with H2 is highly desirable with a precise understanding to the structure-activity relationship of supported catalysts. In particular, the dynamic evolution of support at microscopic scale may play a critical role in heterogeneous catalysis, however, identifying the in situ structural change of support under working condition with atomic precision and revealing its role in catalysis is still a grand challenge. Herein, we visually capture the surface lattice expansion of WO3-x support in Pt-WO3-x catalyst induced by NO in the exemplified reduction of NO with H2 using in situ transmission electron microscopy and first reveal its important role in enhancing catalysis. We find that NO can adsorb on the oxygen vacancy sites of WO3-x and favorably induce the reversible stretching of W-O-W bonds during the reaction, which can reduce the adsorption energy of NO on Pt4 centers and the energy barrier of the rate-determining step. The comprehensive studies reveal that lattice expansion of WO3-x support can tune the catalytic performance of Pt-WO3-x catalyst, leading to 20% catalytic activity enhancement for the exemplified reduction of NO with H2. This work reveals that the lattice expansion of defective support can tune and optimize the catalytic performance at the atomic scale.
RESUMEN
Nitrogen oxide (NOx) pollution presents a severe threat to the environment and human health. Catalytic reduction of NOx with H2 using single-atom catalysts poses considerable potential in the remediation of air pollution; however, the unfavorable process of H2 dissociation limits its practical application. Herein, we report that the in situ formation of PtTi cocatalytic sites (which are stabilized by Pt-Ti bonds) over Pt1/TiO2 significantly increases NOx conversion by reducing the energy barrier of H2 activation. We demonstrate that two H atoms of H2 molecule are absorbed by adjacent Pt atoms in Pt-O and Pt-Ti, respectively, which can promote the cleave of H-H bonds. Besides, PtTi sites facilitate the adsorption of NO molecules and further lower the activation barrier of the whole de-NOx reaction. Extending the concept to Pt1/Nb2O5 and Pd1/TiO2 systems also sees enhanced catalytic activities, demonstrating that engineering the cocatalytic sites can be a general strategy for the design of high-efficiency catalysts that can benefit environmental sustainability.
RESUMEN
Faba bean has gained attention as a cost-effective protein source with the potential to enhance product quality (texture properties, collagen content, etc.) in fish. However, its anti-nutrition factor, high feed conversion ratio, poor growth performance, etc. limit the widely application as a dietary source, especially in carnivorous fish. The water or alcohol extract of faba bean might resolve the problem. In this study, the juvenile Nibea coibor, known for their high-protein, large-sized, and high-grade swim bladder, were fed with seven isoproteic and isolipid experimental diets with the additive of faba bean water extract (1.25%, 2.5%, and 5%) or faba bean alcohol extract (0.9%, 1.8%, and 3.6%), with a control group without faba bean extract. After the 10-week feeding trail, the growth, antioxidant capacity, textural properties, and collagen deposition of the swim bladder were analyzed. Results showed that the 1.25% faba bean water extract group could significantly promote growth, textural quality of the swim bladder, and have beneficial effects on antioxidant response of fish. Conversely, dietary supplementation of faba bean alcohol extract resulted in reduced growth performance in a dose-dependent manner. Furthermore, fish fed diet with 1.25% faba bean water extract exhibited increased collagen content and upregulated collagen-related gene expression in the swim bladder, which was consistent with the Masson stain analysis for collagen fiber. Our results suggested that the anti-nutrient factor and bioactive component of faba bean may mainly be enriched in alcohol extract and water extract of faba bean, respectively. Besides, the appropriate addition of water extract of faba bean may improve the texture quality of the swim bladder by promoting collagen deposition. This study would provide a theoretical basis for the formulated diets with faba bean extract to promote product quality of marine fish.
Asunto(s)
Sacos Aéreos , Antioxidantes , Colágeno , Dieta , Extractos Vegetales , Vicia faba , Vicia faba/química , Animales , Extractos Vegetales/farmacología , Extractos Vegetales/química , Colágeno/metabolismo , Antioxidantes/metabolismo , Dieta/veterinaria , Alimentación Animal/análisis , Suplementos DietéticosRESUMEN
Typeâ I main-chain polyrotaxanes (PRs) with multiple wheels threaded onto the axle are widely employed to design slide-ring materials. However, Typeâ II main-chain PRs with axles threading into the macrocycles on the polymer backbones have rarely been studied, although they feature special topological structures and dynamic characteristics. Herein, we report the design and preparation of Typeâ II main-chain PR-based mechanically interlocked networks (PRMINs), based on which the relationship between microscopic motion of mechanical bonds on the PRs and macroscopic mechanical performance of materials has been revealed. The representative PRMIN-2 exhibits a robust feature in tensile tests with high stretchability (1680 %) and toughness (47.5â MJ/m3). Moreover, it also has good puncture performance with puncture energy of 22.0â mJ. Detailed rheological measurements and coarse-grained molecular dynamics (CGMD) simulation reveal that the embedded multiple [2]rotaxane mechanical bonds on the PR backbones of PRMINs could undergo a synergistic long-range sliding motion under external force, with the introduction of collective dangling chains into the network. As a result, the synchronized motions of coherent PR chains can be readily activated to accommodate network deformation and efficiently dissipate energy, thereby leading to enhanced mechanical performances of PRMINs.
RESUMEN
Adhesives have been widely used to splice and repair materials to meet practical needs of humanity for thousands of years. However, developing robust adhesives with balanced adhesive and cohesive properties still remains a challenging task. Herein, we report the design and preparation of a robust mechanically interlocked [an]daisy chain network (DCMIN) adhesive by orthogonal integration of mechanical bond and 2-ureido-4[1H]-pyrimidone (UPy) H-bonding in a single system. Specifically, the UPy moiety plays dual roles: cross-linking for network formation and multivalent interactions with substrate for strong interfacial bonding. Mechanically interlocked [an]daisy chain, serving as the polymeric backbone of the adhesive, is able to effectively alleviate applied stress and uphold network integrity through synergistic intramolecular motions and thus significantly improve the cohesive performance. Therefore, comparative analyses with the control made of the same quadruple H-bonding network but with non-interlocked [an]daisy chain backbones demonstrate that our DCMIN possesses superior adhesion properties over a wide temperature range. These findings not only contribute to a deep understanding of the structure-property relationships between microscopic mechanical bond motions and macroscopic adhesive properties but also provide a valuable guidance for optimizing design principles of robust adhesives.
RESUMEN
Inspired by the drawstring structure in daily life, here we report the development of a drawstring-mimetic supramolecular complex at the molecular scale. This complex consists of a rigid figure-of-eight macrocyclic host molecule and a flexible linear guest molecule which could interact through three-point non-covalent binding to form a highly selective and efficient host-guest assembly. The complex not only resembles the drawstring structure, but also mimics the properties of a drawstring with regard to deformations under external forces. The supramolecular drawstring can be utilized as an interlocked crosslinker for poly(methyl acrylate), and the corresponding polymer samples exhibit comprehensive enhancement of macroscopic mechanical performance including stiffness, strength, and toughness.
RESUMEN
Polycatenanes are extremely attractive topological architectures on account of their high degrees of conformational freedom and multiple motion patterns of the mechanically interlocked macrocycles. However, exploitation of these peculiar structural and dynamic characteristics to develop robust catenane materials is still a challenging goal. Herein, we synthesize an oligo[2]catenane that showcases mechanically robust properties at both the microscopic and macroscopic scales. The key feature of the structural design is controlling the force-bearing points on the metal-coordinated core of the [2]catenane moiety that is able to maximize the energy dissipation of the oligo[2]catenane via dissociation of metal-coordination bonds and then activation of sequential intramolecular motions of circumrotation, translation, and elongation under an external force. As such, at the microscopic level, the single-molecule force spectroscopy measurement exhibits that the force to rupture dynamic bonds in the oligo[2]catenane reaches a record high of 588 ± 233 pN. At the macroscopic level, our oligo[2]catenane manifests itself as the toughest catenane material ever reported (15.2 vs 2.43 MJ/m3). These fundamental findings not only deepen the understanding of the structure-property relationship of poly[2]catenanes with a full set of dynamic features but also provide a guiding principle to fabricate high-performance mechanically interlocked catenane materials.
RESUMEN
Improving the reaction rate of each step is significant for accelerating the multistep reaction of NO reduction by H2. However, simultaneously enhancing the activation of different gaseous reactants using single-atom catalysts remains a challenge to maximize the activity. Herein, we propose a strategy that utilizes titanium-vacancy-regulated electronic properties of single atoms and defective support (Pt1/d-TiO2) to facilitate electron transfer from edge-share O atoms (OTi) to adjacent Pt single atoms. This leads to the formation of low-valence Pt and unsaturated-charge OTi sites, which causes the catalytic reaction to follow a synergistic mechanism. Specifically, experimental and theoretical analyses demonstrate that low-valence Pt sites finely tune the adsorption of H2 molecules, consequently lowering the dissociation energy from 0.15 to as low as 0.01 eV. Moreover, using quasi-in situ spectroscopy, we clearly observe NO molecules being adsorbed on interfacial oxygen sites of a defective support. Then, the bond energy of the N-O bond is weakened through an electron acceptance-donation mechanism between unsaturated-charge OTi sites and NO, thereby facilitating NO activation. The designed single-atom catalysts with synergistic sites exhibit unmatched activity at low temperatures (above 90% NOx conversion at 100 °C), along with higher turnover frequency value (0.74 s-1) and superior stability, making them potentially suitable for industrial applications.
Asunto(s)
Óxidos de Nitrógeno , Titanio , Temperatura , Óxido Nítrico , GasesRESUMEN
Based on a lever-hinge structure, a target-type fiber Bragg grating (FBG) flow sensor is proposed. Differential measurements of temperature and pressure are achieved using two FBGs. The design idea of the sensor is demonstrated from both theoretical and experimental aspects, and the relationship between FBG wavelength and temperature and the relationship between FBG wavelength and volume flow rate were established, respectively. The sensor is compact with good resolution, high stability, wide measurement range, and easy fabrication, and can be applied to measure temperature and volume flow rate in injection wells.
RESUMEN
Simultaneously introducing covalent and supramolecular cross-links into one system to construct dually cross-linked networks, has been proved an effective approach to prepare high-performance materials. However, so far, features and advantages of dually cross-linked networks compared with those possessing individual covalent or supramolecular cross-linking points are rarely investigated. Herein, on the basis of comparison between supramolecular polymer network (SPN), covalent polymer network (CPN) and dually cross-linked polymer network (DPN), we reveal that the dual cross-linking strategy can endow the DPN with integrated advantages of CPN and SPN. Benefiting from the energy dissipative ability along with the dissociation of host-guest complexes, the DPN shows excellent toughness and ductility similar to the SPN. Meanwhile, the elasticity of covalent cross-links in the DPN could rise the structural stability to a level comparable to the CPN, exhibiting quick deformation recovery capacity. Moreover, the DPN has the strongest breaking stress and puncture resistance among the three, proving the unique property advantages of dual cross-linking method. These findings gained from our study further deepen the understanding of dynamic polymeric networks and facilitate the preparation of high-performance elastomeric materials.
RESUMEN
Pulsed electron-electron double resonance (PELDOR or DEER) spectroscopy is powerful in structure and dynamics study of biological macromolecules by providing distance distribution information ranging from 1.8 to 6 nm, providing that the biomolecules are site-specifically labeled with paramagnetic tags. However, long distances up to 16 nm have been measured on perdeuterated and spin-labeled proteins in deuterated solvent by PELDOR. Here we demonstrate long-range distance measurement on a large RNA, the 97-nucleotide 3'SL RNA element of the Dengue virus 2 genome, by combining a posttranscriptional site-directed spin labeling method using an unnatural basepair system with RNA perdeuteration by enzymatic synthesis using deuterated nucleotides. The perdeuteration removes the coupling of the electron spins of the nitroxide spin labels from the proton nuclear spin system of the RNA and does extend the observation time windows of PELDOR up to 50 µs. This enables one to determine long distances up to 14 nm for large RNAs and their conformational flexibility.
Asunto(s)
Proteínas , ARN , Espectroscopía de Resonancia por Spin del Electrón/métodos , Conformación Molecular , Proteínas/química , ARN/química , Marcadores de SpinRESUMEN
Variation in grain size, a major determinant of grain yield and quality in cereal crops, is determined by both the plant's genetic potential and the available assimilate to fill the grain in the absence of stress. This study investigated grain size variation in response to variation in assimilate supply in sorghum using a diversity panel (n = 837) and a backcross-nested association mapping population (n = 1421) across four experiments. To explore the effects of genetic potential and assimilate availability on grain size, the top half of selected panicles was removed at anthesis. Results showed substantial variation in five grain size parameters with high heritability. Artificial reduction in grain number resulted in a general increase in grain weight, with the extent of the increase varying across genotypes. Genome-wide association studies identified 44 grain size quantitative trait locus (QTL) that were likely to act on assimilate availability and 50 QTL that were likely to act on genetic potential. This finding was further supported by functional enrichment analysis and co-location analysis with known grain number QTL and candidate genes. RNA interference and overexpression experiments were conducted to validate the function of one of the identified gene, SbDEP1, showing that SbDEP1 positively regulates grain number and negatively regulates grain size by controlling primary branching in sorghum. Haplotype analysis of SbDEP1 suggested a possible role in racial differentiation. The enhanced understanding of grain size variation in relation to assimilate availability presented in this study will benefit sorghum improvement and have implications for other cereal crops.
Asunto(s)
Sitios de Carácter Cuantitativo/genética , Sorghum/genética , Productos Agrícolas , Grano Comestible/genética , Grano Comestible/crecimiento & desarrollo , Estudio de Asociación del Genoma Completo , Genotipo , Haplotipos , Fenotipo , Semillas/genética , Semillas/crecimiento & desarrollo , Sorghum/crecimiento & desarrolloRESUMEN
In a photoelectrochemical (PEC) cell, the production of solar fuels such as hydrogen is often accompanied either by the oxidation of water or by the oxidation of organic substrates. In this study, we report bromide-mediated PEC oxidation of alkenes at a mesoporous BiVO4 photoanode and simultaneous hydrogen evolution at the cathode using water as an oxygen source. NaBr as a redox mediator was demonstrated to play a dual role in the PEC organic synthesis, which facilitates the selective oxidation of alkenes into epoxides and suppresses the photocorrosion of BiVO4 in water. This method enables a near-quantitative yield and 100% selectivity for the conversion of water-soluble alkenes into their epoxides in H2O/CH3CN solution (v/v, 4/1) under simulated sunlight without the use of noble metal-containing catalysts or toxic oxidants. The maximum solar-to-electricity efficiency of 0.58% was obtained at 0.39 V vs Ag/AgCl. The obtained epoxide products such as glycidol are important building blocks of the chemical industry. Our results provide an energy-saving and environment-benign approach for producing value-added chemicals coupled with solar fuel generation.
Asunto(s)
Procesos Fotoquímicos , Agua , Bromuros , Oxígeno , Alquenos , Hidrógeno , Compuestos EpoxiRESUMEN
The stay-green trait is recognized as a key drought adaptation mechanism in cereals worldwide. Stay-green sorghum plants exhibit delayed senescence of leaves and stems, leading to prolonged growth, a reduced risk of lodging, and higher grain yield under end-of-season drought stress. More than 45 quantitative trait loci (QTL) associated with stay-green have been identified, including two major QTL (Stg1 and Stg2). However, the contributing genes that regulate functional stay-green are not known. Here we show that the PIN FORMED family of auxin efflux carrier genes induce some of the causal mechanisms driving the stay-green phenotype in sorghum, with SbPIN4 and SbPIN2 located in Stg1 and Stg2, respectively. We found that nine of 11 sorghum PIN genes aligned with known stay-green QTL. In transgenic studies, we demonstrated that PIN genes located within the Stg1 (SbPIN4), Stg2 (SbPIN2), and Stg3b (SbPIN1) QTL regions acted pleiotropically to modulate canopy development, root architecture, and panicle growth in sorghum, with SbPIN1, SbPIN2, and SbPIN4 differentially expressed in various organs relative to the non-stay-green control. The emergent consequence of such modifications in canopy and root architecture is a stay-green phenotype. Crop simulation modelling shows that the SbPIN2 phenotype can increase grain yield under drought.
Asunto(s)
Sequías , Sorghum , Sitios de Carácter Cuantitativo/genética , Sorghum/fisiología , Fenotipo , Adaptación Fisiológica/genética , Grano Comestible/genéticaRESUMEN
Membrane lytic peptides (MLP) are widely explored as cellular delivery vehicles or antitumor/antibacterial agents. However, the poor selectivity between cancer and normal cells slims their prospects as potential anti-tumor drugs. Herein, we have developed a rationally designed self-assembly strategy to enhance tumor selectivity of MLP-based conjugates, incorporating a hydrophobic triphenylphosphonium (TPP) group for mitochondria targeting, and a hydrophilic arginine-glycine-aspartic acid (RGD) sequence targeting integrins. The self-assembly nanoparticles can enhance the stability of the peptides inâ vitro plasma and be endocytosed selectively into the cancer cells. The histidine-rich lytic peptide component assists the disruption of endosomal/lysosomal membranes and subsequent the mitochondria membrane, which leads to apoptosis. This rational design of MLP-based conjugates provides a practical strategy to increase the application prospects of lytic peptides in cancer treatment.
Asunto(s)
Antineoplásicos , Nanopartículas , Neoplasias , Antineoplásicos/farmacología , Antineoplásicos/uso terapéutico , Humanos , Mitocondrias , Neoplasias/tratamiento farmacológico , Péptidos/uso terapéuticoRESUMEN
Ce3+-doped SrS phosphors with a charge-compensating Na+ addition were successfully synthesized via a solid-state reaction method, and the related X-ray diffraction patterns can be indexed to the rock-salt-like crystal structure of the Fm3Ì m space group. SrS:(Ce3+)x (0.005 ≤ x ≤ 0.05) and SrS:(Ce3+)0.01,(Na+)y (0.005 ≤ y ≤ 0.030) phosphors were excited by 430 nm UV-Vis light, targeted to the 5d1 â 4f1 transition of Ce3+. The composition-optimized SrS:(Ce3+)0.01, (Na+)0.015 phosphors showed an intense broad emission band at λ = 430-700 nm. The doping of Na+ was probed by solid-state nuclear magnetic resonance. The 430 nm pumped white light-emitting diode structure fabricated with a combination of SrS:(Ce3+)0.01,(Na+)0.015 and Sr2Si5N8:Eu2+ phosphors shows a color-rendering index (Ra) of 89.7. The proposed strategy provides new avenues for the design and realization of novel high color quality solid-state LEDs.
RESUMEN
Photoelectrochemical reduction of CO2 is a promising approach for renewable fuel production. We herein report a novel strategy for preparation of hybrid photocathodes by immobilizing molecular cobalt catalysts on TiO2 -protected n+ -p Si electrodes (Si|TiO2 ) coated with multiwalled carbon nanotubes (CNTs) by π-π stacking. Upon loading a composite of CoII (BrqPy) (BrqPy=4',4''-bis(4-bromophenyl)-2,2' : 6',2'' : 6'',2'''-quaterpyridine) catalyst and CNT on Si|TiO2 , a stable 1-Sun photocurrent density of -1.5â mA cm-2 was sustained over 2â h in a neutral aqueous solution with unity Faradaic efficiency and selectivity for CO production at a bias of zero overpotential (-0.11â V vs. RHE), associated with a turnover frequency (TOFCO ) of 2.7â s-1 . Extending the photoelectrocatalysis to 10â h, a remarkable turnover number (TONCO ) of 57000 was obtained. The high performance shown here is substantially improved from the previously reported photocathodes relying on covalently anchored catalysts.
RESUMEN
Water transport across epithelial cells that line the airways and alveoli is a crucial component of lung physiology. Aquaporins (AQPs) facilitate water transport across the air space-capillary barrier in the distal lung. However, the roles of lung AQPs in desert animal adaptation to dry airstream environments are still unclear. A hare (Lepus yarkandensis) only lives in the Tarim Basin, and its living environment is an arid climate with rare precipitation. We studied cellular localization and expression levels of AQP1, AQP3, AQP4 and AQP5 in L. yarkandensis lungs by immunohistochemistry, quantitative real-time polymerase chain reaction and Western blot. The lung of rabbits (Oryctolagus cuniculus) that inhabit in mesic environment was similarly studied. Obtained results in two species of animals were compared to investigate whether AQPs in the lung altered expression in the animal living in arid region. AQP1 was localized to the endothelial cells in capillaries and venules surrounding terminal bronchioles and alveoli. AQP5 was localized to the ciliated columnar cells in terminal bronchioles and the alveolar type I cells in the alveolus. Quantitative real-time PCR analysis showed higher AQP1 and AQP5 mRNA levels in L. yarkandensis compared to O. cuniculus. Similar results were obtained by Western blot. These results revealed that the higher expression levels of AQP1 and AQP5 played a significant role in water transport in the lungs of arid-desert living L. yarkandensis and might accelerate water transport from capillary compartments to the airspace.
Asunto(s)
Acuaporinas/metabolismo , Clima Desértico , Ecosistema , Regulación de la Expresión Génica/fisiología , Liebres/metabolismo , Pulmón/metabolismo , Animales , Acuaporinas/genética , Agua/metabolismoRESUMEN
Control of selectivity is one of the central topics in organic chemistry. Although unprecedented alkoxyl-radical-induced transformations have drawn a lot of attention, compared to selective C-H activation, selective radical O-H activation remains less explored. Herein, we report a novel selective radical O-H activation strategy of diols by combining spatial effects with proton-coupled electron transfer (PCET). It was found that DMSO is an essential reagent that enables the regioselective transformation of diols. Mechanistic studies indicated the existence of the alkoxyl radical and the selective interaction between DMSO and hydroxyl groups. Moreover, the distal C-C cleavage was realized by this selective alkoxyl-radical-initiation protocol.
RESUMEN
Gene editing techniques are becoming powerful tools for modifying target genes in organisms. Although several methods have been developed to detect gene-edited organisms, these techniques are time and labour intensive. Meanwhile, few studies have investigated high-throughput detection and screening strategies for plants modified by gene editing. In this study, we developed a simple, sensitive and high-throughput quantitative real-time (qPCR)-based method. The qPCR-based method exploits two differently labelled probes that are placed within one amplicon at the gene editing target site to simultaneously detect the wild-type and a gene-edited mutant. We showed that the qPCR-based method can accurately distinguish CRISPR/Cas9-induced mutants from the wild-type in several different plant species, such as Oryza sativa, Arabidopsis thaliana, Sorghum bicolor, and Zea mays. Moreover, the method can subsequently determine the mutation type by direct sequencing of the qPCR products of mutations due to gene editing. The qPCR-based method is also sufficiently sensitive to distinguish between heterozygous and homozygous mutations in T0 transgenic plants. In a 384-well plate format, the method enabled the simultaneous analysis of up to 128 samples in three replicates without handling the post-polymerase chain reaction (PCR) products. Thus, we propose that our method is an ideal choice for screening plants modified by gene editing from many candidates in T0 transgenic plants, which will be widely used in the area of plant gene editing.