RESUMEN
To obtain qualified logging while drilling (LWD) data, a new acoustic LWD tool was designed. Its overall design is introduced here, including the physical construction, electronic structure, and operation flowchart. Thereafter, core technologies adopted in this tool are presented, such as dominant exciting wave bands of dipole source, a sine wave pulse excitation circuit, broadband impedance matching, and an intellectualized active reception transducer. Lastly, we tested this tool in the azimuthal anisotropy module well, calibration well, and normal well, working in the model of the cable, sliding eye, and logging while drilling. Experiments showed that the core technologies achieved ideal results and that the LWD tool obtained qualified data.
RESUMEN
BACKGROUND: Cancer posed a serious threat to human health, and early diagnosis of cancer biomarker was extremely important for the treatment and control of cancer. Electrochemistry-based assays were low-cost, responsive and easy to operate, but there were some challenges in terms of accuracy, detection limit, efficiency and portability. The combination of microfluidic devices and electrochemical methods was expected to construct a high-performance sensing platform, but long-time antigen-antibody incubation was still required. Therefore, a novel microfluidic chip needs to be developed, which has the advantages of good portability, short incubation time, high accuracy, low detection limit and great application to point-of-care testing. RESULTS: A microfluidic sensor based on microcolumn array electrodes was developed, in which microcolumns could create local mixed flow to reduce the incubation time of target molecules and enhance their interaction with the sensing interface. Besides, three dimensional Mxene fibers-gold nanoparticles (3D MF-Au) was modified on the microcolumn array electrodes to increase active sites and provide more electrolyte shuttle holes. The electrolyte turbulence caused by the microcolumn array electrodes could heighten the contact between the target molecules and sensing interface and accelerate the transfer of redox pairs, thus reducing the incubation time of the target molecules and improving the electrochemical responses in synergy with the 3D MF-Au. Herein, the detection of AFP was chosen as a model, and the microfluidic sensor possessed superior performance for analysis of AFP in the range of 0.1 pg mL-1 - 200 ng mL-1 with a low detection limit (LOD) of 0.0648 pg mL-1. SIGNIFICANCE: This microfluidic chip integrating with microcolumn array electrodes has been successfully implemented to detect AFP in human serum, and the results were consistent with that of electrochemical chemiluminescence method. The microfluidic chip provided a new strategy of portability, shortening incubation time and enhancing electrical signals for antigen detection of real samples, which showed great utilization potentiality in point-of-care testing.
Asunto(s)
Nanopartículas del Metal , Neoplasias , Humanos , alfa-Fetoproteínas/análisis , Microfluídica , Oro/química , Nanopartículas del Metal/química , Límite de Detección , Electrodos , Técnicas Electroquímicas/métodos , ElectrólitosRESUMEN
Heavy metal pollution is causing a great threat to ecological environment and public health, which needs an efficient strategy for monitoring. A portable microfluidic electrochemical sensing system was developed for the determination of heavy metal ions. Herein, the detection of Pb2+ was chosen as a model, and a microfluidic electrochemical sensing chip relying on a smartphone-based electrochemical workstation was proposed for rapid detection Pb2+ with the assistance of thermocapillary convection result from the formed temperature gradient. The 3D Ag-rGO-f-Ni(OH)2/NF composites, prepared by one-step hydrothermal method without any Ni precursor salt, were used to further amplify electrochemical signals under the synergistic effect of thermocapillary convection. The thermocapillary convection could accelerate the preconcentration process and shorten the detection time (save 300 s of preconcentration time). The fabricated system exhibited the exceptional competence for monitoring of Pb2+ range from 0.01 µg/L to 2100 µg/L with a low detection limit (LOD) of 0.00464 µg/L. Furthermore, this portable system has been successfully demonstrated for detecting Pb2+ (0.01 µg/L to 2100 µg/L) in river water (LOD = 0.00498 µg/L), fish (LOD = 0.00566 µg/L) and human serum samples (LOD = 0.00836 µg/L), and the results were consistent with inductively coupled plasma-mass spectrometry (ICP-MS). The proposed novel sensing platform provides a cost-effectiveness, rapidly responding and ease-to-use pathway for analysis of heavy metal ions in real samples and shows great potential in point-of-care testing.
RESUMEN
The facile, green, and efficient strategy for the separation of lignin from straw and subsequent production of value-added chemicals is crucial to the current utilization of straw. Herein, up to 23.72% of lignin was isolated from wheat stalk over cheap and green 1-(3-sulfobutyl) triethylammonium hydrogen sulfate ([BSTEA]HSO4) in aqueous ethanol (Vethanol: Vwater = 4:1). The acquired lignin was verified as a p-hydroxyphenyl-guaiacyl-syringyl type, which had a narrower molecular weight distribution, better thermal stability, and higher purity compared with those of the lignin obtained using 1-methyl-3-(4-sulfobutyl)-imidazolium hydrogen sulfate and 1-(3-sulfobutyl) pyridinium hydrogen sulfate. Moreover, a carbohydrate-rich liquid containing [BSTEA]HSO4 was obtained by water removal from the waste liquid after lignin separation and further converted to ethyl levulinate (EL) by a one-pot process in the presence of inexpensive and stable USY zeolite. The yield of EL reached 30.23% at 200 °C for 60 min over the presence of 40% [BSTEA]HSO4 and 60% USY zeolite. Under optimal conditions, the yields of lignin and EL can respectively reach 83.89 and 72.28% of those catalyzed by a fresh catalyst after five cycles. In short, the above-mentioned methods present a green, economic, and efficient route for the extraction of lignin and further treatment of the liquid waste generated during the extraction process.
Asunto(s)
Lignina , Zeolitas , Lignina/química , Triticum/química , Etanol/química , Agua , Hidrógeno , SulfatosRESUMEN
Lignin, the second largest component of biomass, is considered as an important alternative source of fossil reserves for the production of fuels and chemicals. Here, we developed a novel method to oxidatively degrade organosolv lignin into value-added four-carbon esters, particularly diethyl maleate (DEM), with the cooperative catalyst consisting of 1-(3-sulfobutyl) triethylammonium hydrogen sulfate ([BSTEA]HSO4) and 1-butyl-3-methylimidazolium ferric chloride ([BMIM]Fe2Cl7). Under optimized conditions (1.00 MPa initial O2 pressure, 160 °C, 5 h), the lignin aromatic ring was effectively cleaved by oxidation to form DEM with a yield of 15.85% and a selectivity of 44.25% in the presence of the synergistic catalyst of [BMIM]Fe2Cl7-[BSMIM]HSO4 (1/3, mol/mol). The structure and composition analysis of lignin residues and liquid products confirmed that the aromatic units in lignin were effectively and selectively oxidized. Furthermore, the catalytic oxidation of lignin model compounds was explored for obtaining a possible reaction pathway of oxidative cleavage of lignin aromatic units to DEM. This study provides a promising alternative method for the production of traditional petroleum-based chemicals.
Asunto(s)
Líquidos Iónicos , Líquidos Iónicos/química , Lignina/química , Triticum , Catálisis , Estrés OxidativoRESUMEN
Photocatalytic technology has been considered as a promising method to alleviate environmental pollution owing to the dual characteristics of redox. The novel V-based H5PMo10V2O40 (HPA-2) photocatalyst with Z-scheme heterostructure was constructed. The energy level of HPA-2 matches well with CdS and g-C3N4 (CN) according to Mott-Schottky and UV-Vis diffused reflectance tests, which allows the efficient separation of photogenerated electrons. The optimized CdS/HPA-2/CN showed superior ability in Rhodamine B (RhB) degradation and reduction of Cr (â ¥) under visible light irradiation. The maximum rate constant reached 0.092 min-1 for RhB degradation at 60 min and 0.260 min-1 for Cr (â ¥) reduction at 20 min, respectively. The photocatalytic mechanism was analyzed by adding scavengers. The effect of active species for RhB degradation was determined as h+ > ·O2- > ·OH, while ·O2- and e- were essential for the reduction of Cr (â ¥). Besides, cyclic tests exhibit excellent repeatability and stable structure of CdS/HPA-2/CN after four cycles. Meanwhile, the detailed degradation process of RhB involving de-ethylation, hydroxylation, substitution and decarboxylation was determined according to LC-MS and evaluated by Fukui function calculation. Furthermore, total organic carbon content decreased to 6.2% of the initial value. In this work, as an electron mediator, HPA-2 provides the inspiration for construction of Z-scheme heterojunction, and CdS/HPA-2/CN exhibits enormous potential in the environmental remediation by photocatalysis.