RESUMEN
A novel synthetic approach to nemtabrutinib (MK-1026) was recently developed in our laboratories. The chemistry goes through a cyrene amine intermediate which does not contain any chromophore. As a result, analysis of this key chiral intermediate by HPLC-UV is not feasible. Initial attempts to develop a HPLC-CAD method were unfruitful; therefore, a gas chromatography method was developed and optimized to effectively monitor the cyrene amine free base and related impurities generated during the process. As the synthetic process continued to be optimized, the toluene sulfonic acid salt (p-TsOH) of the cyrene amine intermediate was later identified by our process chemistry group to be beneficial in terms of ease of isolation and purity upgrade. However, repeated injections of the cyrene amine p-TsOH intermediate resulted in rapid GC column deterioration. After identifying p-TsOH as the main cause of the issue, we developed a straightforward and practical procedure that involves using a resin to remove the p-TsOH counterion in-situ, which converts cyrene amine salt to its neutral form in sample solutions. This protocol was successfully demonstrated and proven to be an efficient solution. This methodology may find applications with other analytes containing counterions that need to be neutralized prior to analysis.
Asunto(s)
Cloruro de Sodio , Tolueno , Cromatografía Líquida de Alta Presión/métodos , AminasRESUMEN
Ion Chromatography (IC) is one of the most widely used methods for analyzing ionic species in pharmaceutical samples. A universal IC method that can separate a wide range of different analytes is highly desired as it can save a lot of time for method development and validation processes. Herein we report the development of a universal method for anions in active pharmaceutical ingredients (APIs) using computer-assisted chromatography modeling tools. We have screened three different IC columns (Dionex IonPac AS28-Fast 4 µm, AS19 4 µm and AS11-HC 4 µm) to determine the best suitable column for universal IC method development. A universal IC method was then developed using an AS11-HC 4 µm column to separate 31 most common anionic substances in 36 mins. This method was optimized using LC Simulator and a model which precisely predicts the retention behavior of 31 anions was established. This model demonstrated an excellent match between predicted and experimental analyte retention time (R2 =0.999). To validate this universal IC method, we have studied the stability of sulfite and sulfide analytes in ambient conditions. The method was then validated for a subset of 29 anions using water and organic solvent/water binary solvents as diluents for commercial APIs. This universal IC method provides an efficient and simple way to separate and analyze common anions in APIs. In addition, the method development process combined with LC simulator modeling can be effectively used as a starting point during method development for other ions beyond those investigated in this study.
Asunto(s)
Medicamentos a Granel , Agua , Cromatografía por Intercambio Iónico/métodos , Aniones/química , Iones , Solventes/análisis , ComputadoresRESUMEN
Control of process impurities during manufacturing of drug substance is critical to ensure quality and process robustness. During commercial process development for the gefapixant citrate drug substance, several process impurities were found to derive from sulfuryl chloride, an impurity in the raw material, chlorosulfonic acid (CSA). This made controlling the CSA quality essential for commercial production of this drug substance. Various direct analysis methods were evaluated and found unsuitable because of the highly reactive nature and structural similarity of sulfuryl chloride and CSA. Therefore, a robust derivatization reversed-phase high performance liquid chromatography (RP-HPLC) method was developed and validated to accurately quantify sulfuryl chloride in CSA. The derivatization method was utilized to evaluate many CSA batches from different commercial suppliers and to establish a correlation between sulfuryl chloride levels in CSA and the levels of process impurities in downstream materials. The methodology described herein informed the development of setting the specification on sulfuryl chloride for CSA to ensure a robust process for manufacturing high-quality gefapixant citrate drug substance. The derivatization method was successfully validated and transferred to the commercial commodity supplier for release testing of CSA as a raw material for gefapixant citrate commercial campaigns.
Asunto(s)
Cloruros , Contaminación de Medicamentos , Cromatografía Líquida de Alta Presión/métodos , Citratos , Contaminación de Medicamentos/prevención & control , Pirimidinas , Reproducibilidad de los Resultados , Sulfonamidas , Ácidos SulfónicosRESUMEN
T(N) antigen building blocks Nalpha-(9-fluorenylmethoxycarbonyl)-O-(3,4,6-tri-O-acetyl-2-azido-2-deoxy-alpha-D-galactopyranosyl)-L-serine/L-threonine pentafluorophenyl ester [Fmoc-L-Ser/L-Thr(Ac3-alpha-D-GalN3)-OPfp, 13/14] have been synthesized by two different routes, which have been compared. Overall isolated yields [three or four chemical steps, and minimal intermediary purification steps] of enantiopure 13 and 14 were 5-18% and 6-10%, respectively, based on 3,4,6-tri-O-acetyl-D-galactal (1). A byproduct of the initial azidonitration reaction of the synthetic sequence, that is, N-acetyl-3,4,6-tri-O-acetyl-2-azido-2-deoxy-alpha-D-galactopyranosylamine (5), has been characterized by X-ray crystallography, and shown by 1H NMR spectroscopy to form complexes with lithium bromide, lithium iodide, or sodium iodide in acetonitrile-d3. Intermediates 3,4,6-tri-O-acetyl-2-azido-2-deoxy-alpha-D-galactopyranosyl bromide (6) and 3,4,6-tri-O-acetyl-2-azido-2-deoxy-beta-D-galactopyranosyl chloride (7) were used to glycosylate Nalpha-(9-fluorenylmethoxycarbonyl)-L-serine/L-threonine pentafluorophenyl esters [Fmoc-L-Ser/L-Thr-OPfp, 11/12]. Previously undescribed low-level dehydration side reactions were observed at this stage; the unwanted byproducts were easily removed by column chromatography.
Asunto(s)
Antígenos de Carbohidratos Asociados a Tumores/química , Glicopéptidos/síntesis química , Bioquímica/métodos , Secuencia de Carbohidratos , Cristalografía por Rayos X , Glicopéptidos/química , Glicosilación , Litio/química , Datos de Secuencia Molecular , Estructura Molecular , Sodio/químicaRESUMEN
This work summarizes the pharmaceutical evaluation of a preclinical drug candidate with poor physicochemical properties. Compound 1 is a weakly basic, GPR-119 agonist designated to Biopharmaceutics Classification System Class II because of good permeability in a Caco-2 cell line model and poor solubility. Compound 1 showed good oral bioavailability from a solution formulation at low doses and oral exposure sufficient for toxicological evaluation at high doses from a nanosuspension of Form A-the only known polymorph of 1 during drug discovery. The identification of the thermodynamically stable polymorph, Form B, during early development adversely affected the bioperformance of the nanosuspension. The poor solubility of Form B resulted in a significant reduction in the oral exposure from a nanosuspension to a level that was insufficient for toxicological evaluation of compound 1. Subsequent to the discovery of Form B, multiple form and formulation engineering strategies were evaluated for their ability to enhance the oral exposure of 1. Formulations based on cocrystals and amorphous solid dispersions showed a statistically significant increase in exposure, sixfold and sevenfold, respectively, over the benchmark formulation, a suspension of Form B. The physicochemical characterization of 1, and the solid form and formulation engineering approaches explored to address the insufficient oral exposure of Form B are discussed along with insights on improving the physicochemical properties of the follow-on drug candidates in discovery.