Accessing Highly Oriented Two-Dimensional Perovskite Films via Solvent-Vapor Annealing for Efficient and Stable Solar Cells.

Accessing vertical orientation of two-dimensional (2D) perovskite films is key to achieving high-performance solar cells with these materials. Herein, we report on solvent-vapor annealing (SVA) as a general postdeposition strategy to induce strong vertical orientation across broad classes of 2D perovskite films. We do not observe any local compositional drifts that would result in impure phases during SVA. Instead, our experiments point to solvent vapor plasticizing 2D perovskite films and facilitating their surface-induced reorientation and concomitant grain growth, which enhance out-of-plane charge transport. Solar cells with SVA 2D perovskites exhibit superior efficiency and stability compared to their untreated analogs. With a certified efficiency of (18.00 ± 0.30) %, our SVA (BDA)(Cs0.1FA0.9)4Pb5I16 solar cell boasts the highest efficiency among all solar cells with 2D perovskites (n ≤ 5) reported so far.

Presence of Short Intermolecular Contacts Screens for Kinetic Stability in Packing Polymorphs.

Polymorphism is pervasive in molecular solids. While computational predictions of the molecular polymorphic landscape have improved significantly, identifying which polymorphs are preferentially accessed and experimentally stable remains a challenge. We report a framework that correlates short intermolecular contacts with polymorphic stability. The presence of short contacts between neighboring molecules prevents structural rearrangement and stabilizes the packing arrangement, even when the stabilized polymorph is not enthalpically favored. In the absence of such intermolecular short contacts, the molecules have added degrees of freedom for structural rearrangement, and solid-solid polymorphic transformations occur readily. Starting with a series of core-halogenated naphthalene tetracarboxylic diimides, we establish this framework with the packing polymorphs of more than 20 compounds, ranging from molecular semiconductors to pharmaceutics and biological building blocks. This framework, widely applicable across molecular solids, can help refine computational predictions by identifying the polymorphs that are kinetically stable.

Eliminating Piezoresistivity in Flexible Conducting Polymers for Accurate Temperature Sensing under Dynamic Mechanical Deformations.

The polarity and the magnitude of polyaniline's gauge factor are tuned through structural modification. Combining conducting polymers with gauge factors of opposite polarities yields an accurate temperature sensor, even when deployed under dynamic strains.

Tuning polymorphism and orientation in organic semiconductor thin films via post-deposition processing.

Though both the crystal structure and molecular orientation of organic semiconductors are known to impact charge transport in thin-film devices, separately accessing different polymorphs and varying the out-of-plane molecular orientation is challenging, typically requiring stringent control over film deposition conditions, film thickness, and substrate chemistry. Here we demonstrate independent tuning of the crystalline polymorph and molecular orientation in thin films of contorted hexabenzocoronene, c-HBC, during post-deposition processing without the need to adjust deposition conditions. Three polymorphs are observed, two of which have not been previously reported. Using our ability to independently tune the crystal structure and out-of-plane molecular orientation in thin films of c-HBC, we have decoupled and evaluated the effects that molecular packing and orientation have on device performance in thin-film transistors (TFTs). In the case of TFTs comprising c-HBC, polymorphism and molecular orientation are equally important; independently changing either one affects the field-effect mobility by an order of magnitude.

Efficient organic solar cells with helical perylene diimide electron acceptors.

We report an efficiency of 6.1% for a solution-processed non-fullerene solar cell using a helical perylene diimide (PDI) dimer as the electron acceptor. Femtosecond transient absorption spectroscopy revealed both electron and hole transfer processes at the donor-acceptor interfaces, indicating that charge carriers are created from photogenerated excitons in both the electron donor and acceptor phases. Light-intensity-dependent current-voltage measurements suggested different recombination rates under short-circuit and open-circuit conditions.

Effect of ozone exposure on the electrical characteristics of high-purity, large-diameter semiconducting carbon nanotubes.

In this study, we have elucidated the interactions between ozone and carbon nanotubes by monitoring the characteristics of field-effect transistors based on polymer-sorted, large-diameter semiconducting carbon nanotubes. The drain-source current of these transistors initially increases with ozone exposure and then it progressively decreases with increasing exposure beyond 3 min. This non-monotonic dependence of the drain-source current can be ascribed to two competing processes. At short ozone exposure, p-doping of carbon nanotubes dominates; the drain-source current thus increases as a result of increasing hole concentration. This effect is most evidenced in a progressive threshold voltage shift towards positive voltages with increasing exposure to ozone. At extended ozone exposure, chemical oxidation of carbon nanotubes instead dominates. The drain-source current decreases as a result of decreasing hole mobility. This effect manifests itself in a monotonic decrease in the mobility of these devices as a function of ozone exposure.

A General Approach to Activate Second-Scale Room Temperature Photoluminescence in Organic Small Molecules.

Organic small molecules that exhibit second-scale phosphorescence at room temperature are of interest for potential applications in sensing, anticounterfeiting, and bioimaging. However, such materials systems are uncommon-requiring millisecond to second-scale triplet lifetimes, efficient intersystem crossing, and slow rates of nonradiative recombination. Here, a simple and scalable approach is demonstrated to activate long-lived phosphorescence in a wide variety of molecules by suspending them in rigid polymer hosts and annealing them above the polymer's glass transition temperature. This process produces submicron aggregates of the chromophore, which suppresses intramolecular motion that leads to nonradiative recombination and minimizes triplet-triplet annihilation that quenches phosphorescence in larger aggregates. In some cases, evidence of excimer-mediated intersystem crossing that enhances triplet generation in aggregated chromophores is found. In short, this approach circumvents the current design rules for long-lived phosphors, which will streamline their discovery and development.

Using self-organization to control morphology in molecular photovoltaics.

This work explores the formation of well-defined molecular p-n junctions in solution-processed self-assembled heterojunction solar cells using dodecyloxy-substituted contorted hexabenzocoronene (12-c-HBC) as a donor material and phenyl-C(70)-butyric acid methyl ester (PC(70)BM) as an acceptor. We find that the contorted 12-c-HBC molecules effectively assemble in solution to form a nested structure with the ball-shaped PC(70)BM. The result is a self-assembled molecular-scale p-n junction. When this well-defined p-n junction is embedded in active films, we can make efficient self-assembled solar cells with minimal amounts of donor material relative to the acceptor. The power conversion efficiency is drastically enhanced by the mode of donor and acceptor assembly within the film.

Directly patternable, highly conducting polymers for broad applications in organic electronics.

Postdeposition solvent annealing of water-dispersible conducting polymers induces dramatic structural rearrangement and improves electrical conductivities by more than two orders of magnitude. We attain electrical conductivities in excess of 50 S/cm when polyaniline films are exposed to dichloroacetic acid. Subjecting commercially available poly(ethylene dioxythiophene) to the same treatment yields a conductivity as high as 250 S/cm. This process has enabled the wide incorporation of conducting polymers in organic electronics; conducting polymers that are not typically processable can now be deposited from solution and their conductivities subsequently enhanced to practical levels via a simple and straightforward solvent annealing process. The treated conducting polymers are thus promising alternatives for metals as source and drain electrodes in organic thin-film transistors as well as for transparent metal oxide conductors as anodes in organic solar cells and light-emitting diodes.

Thin-Film Organic Heteroepitaxy.

Incorporating crystalline organic semiconductors into electronic devices requires understanding of heteroepitaxy given the ubiquity of heterojunctions in these devices. However, while rules for commensurate epitaxy of covalent or ionic inorganic material systems are known to be dictated by lattice matching constraints, rules for heteroepitaxy of molecular systems are still being written. Here, it is found that lattice matching alone is insufficient to achieve heteroepitaxy in molecular systems, owing to weak intermolecular forces that describe molecular crystals. It is found that, in addition, the lattice matched plane also must be the lowest energy surface of the adcrystal to achieve one-to-one commensurate molecular heteroepitaxy over a large area. Ultraviolet photoelectron spectroscopy demonstrates the lattice matched interface to be of higher electronic quality than a disordered interface of the same materials.

Orientation-independent charge transport in single spherulites from solution-processed organic semiconductors.

Due to the rapidity of morphological development during deposition, solution-processed organic semiconductor thin films exist in semicrystalline or polycrystalline states, incorporating a high degree of local variations in molecular orientation compared to their single-crystal counterparts. Spherulites, a common crystalline superstructure found in these systems, for example, incorporate a large distribution of molecular orientations about the radial axis to maintain their space-filling growth habit. Here, we aim to determine how this distribution of molecular orientations influences charge transport by fabricating arrays of devices on single spherulites. Given that the orientation distribution that is present about the radial axis mandates the presence of low-angle grain boundaries within single spherulites, we find intraspherulitic charge transport to be independent of the general direction of π-stacking; organic field-effect transistors exhibit comparable mobilities regardless of how their channels are oriented with respect to the general π-stacking direction.

A supramolecular complex in small-molecule solar cells based on contorted aromatic molecules.

"Ball and socket" motif: The contorted dibenzotetrathienocoronene (6-DBTTC) forms a complex with the C(70) fullerene PC(70) BM embedded in an amorphous phase of PC(70) BM. The materials are processable into organic solar cells in solution. The power conversion efficiency is maximal when there is a 1:2 molar ratio of 6-DBTTC to PC(70) BM. Formation of the supramolecular complex directly affects charge separation in the active layer.

Advancing 2D Perovskites for Efficient and Stable Solar Cells: Challenges and Opportunities.

Perovskite solar cells (PSCs) have rapidly emerged as one of the hottest topics in the photovoltaics community owing to their high power-conversion efficiencies (PCE), and the promise to be produced at low cost. Among various PSCs, typical 3D perovskite-based solar cells deliver high PCE but they suffer from severe instability, which restricts their practical applications. In contrast to 3D perovskites, 2D perovskites that incorporate larger, less volatile, and generally more hydrophobic organic cations exhibit much improved thermal, chemical, and environmental stability. 2D perovskites can have different roles within a solar cell, either as the primary light absorber (2D PSCs), or as a capping layer atop a 3D perovskite absorbing layer (2D/3D PSCs). Tradeoffs between PCE and stability exist in both types of PSCs-2D PSCs are more stable but exhibit lower efficiency while 2D/3D PSCs deliver exciting efficiency but show relatively poor stability. To address this PCE/stability tradeoff, the challenges both the 2D and 2D/3D PSCs face are identified and select works the community has undertaken to overcome them are highlighted in this review. It is ended with several recommendations on how to further improve PSCs so their performance and stability can be commensurate with application requirements.

A charge transfer framework that describes supramolecular interactions governing structure and properties of 2D perovskites.

The elucidation of structure-to-function relationships for two-dimensional (2D) hybrid perovskites remains a primary challenge for engineering efficient perovskite-based devices. By combining insights from theory and experiment, we describe the introduction of bifunctional ligands that are capable of making strong hydrogen bonds within the organic bilayer. We find that stronger intermolecular interactions draw charge away from the perovskite layers, and we have formulated a simple and intuitive computational descriptor, the charge separation descriptor (CSD), that accurately describes the relationship between the Pb-I-Pb angle, band gap, and in-plane charge transport with the strength of these interactions. A higher CSD value correlates to less distortion of the Pb-I-Pb angle, a reduced band gap, and higher in-plane mobility of the perovskite. These improved material properties result in improved device characteristics of the resulting solar cells.

Accelerated aging of all-inorganic, interface-stabilized perovskite solar cells.

To understand degradation routes and improve the stability of perovskite solar cells (PSCs), accelerated aging tests are needed. Here, we use elevated temperatures (up to 110°C) to quantify the accelerated degradation of encapsulated CsPbI3 PSCs under constant illumination. Incorporating a two-dimensional (2D) Cs2PbI2Cl2 capping layer between the perovskite active layer and hole-transport layer stabilizes the interface while increasing power conversion efficiency of the all-inorganic PSCs from 14.9 to 17.4%. Devices with this 2D capping layer did not degrade at 35°C and required >2100 hours at 110°C under constant illumination to degrade by 20% of their initial efficiency. Degradation acceleration factors based on the observed Arrhenius temperature dependence predict intrinsic lifetimes of 51,000 ± 7000 hours (>5 years) operating continuously at 35°C.

Excited-State Dynamics of 5,14- vs 6,13-Bis(trialkylsilylethynyl)-Substituted Pentacenes: Implications for Singlet Fission.

Singlet fission is a process in conjugated organic materials that has the potential to considerably improve the performance of devices in many applications, including solar energy conversion. In any application involving singlet fission, efficient triplet harvesting is essential. At present, not much is known about molecular packing arrangements detrimental to singlet fission. In this work, we report a molecular packing arrangement in crystalline films of 5,14-bis(triisopropylsilylethynyl)-substituted pentacene, specifically a local (pairwise) packing arrangement, responsible for complete quenching of triplet pairs generated via singlet fission. We first demonstrate that the energetic condition necessary for singlet fission is satisfied in amorphous films of the 5,14-substituted pentacene derivative. However, while triplet pairs form highly efficiently in the amorphous films, only a modest yield of independent triplets is observed. In crystalline films, triplet pairs also form highly efficiently, although independent triplets are not observed because triplet pairs decay rapidly and are quenched completely. We assign the quenching to a rapid nonadiabatic transition directly to the ground state. Detrimental quenching is observed in crystalline films of two additional 5,14-bis(trialkylsilylethynyl)-substituted pentacenes with either ethyl or isobutyl substituents. Developing a better understanding of the losses identified in this work, and associated molecular packing, may benefit overcoming losses in solids of other singlet fission materials.

Hot-Casting-Assisted Liquid Additive Engineering for Efficient and Stable Perovskite Solar Cells.

High-performance inorganic-organic lead halide perovskite solar cells (PSCs) are often fabricated with a liquid additive such as dimethyl sulfoxide (DMSO), which retards crystallization and reduces roughness and pinholes in the perovskite layers. However, DMSO can be trapped during perovskite film formation and induce voids and undesired reaction byproducts upon later processing steps. Here, it is shown that the amount of residual DMSO can be reduced in as-spin-coated films significantly through use of preheated substrates, or a so-called hot-casting method. Hot casting increases the perovskite film thickness given the same concentration of solutions, which allows for reducing the perovskite solution concentration. By reducing the amount of DMSO in proportion to the concentration of perovskite precursors and using hot casting, it is possible to fabricate perovskite layers with improved perovskite-substrate interfaces by suppressing the formation of byproducts, which increase trap density and accelerate degradation of the perovskite layers. The best-performing PSCs exhibit a power conversion efficiency (PCE) of 23.4% (23.0% stabilized efficiency) under simulated solar illumination. Furthermore, encapsulated devices show considerably reduced post-burn-in decay, retaining 75% and 90% of their initial and post-burn-in efficiencies after 3000 h of operation with maximum power point tracking (MPPT) under high power of ultraviolet (UV)-containing continuous light exposure.

All-Polymer Bulk-Heterojunction Organic Electrochemical Transistors with Balanced Ionic and Electronic Transport.

The rapid development of organic electrochemical transistor (OECTs)-based circuits brings new opportunities for next-generation integrated bioelectronics. The all-polymer bulk-heterojunction (BHJ) offers an attractive, inexpensive alternative to achieve efficient ambipolar OECTs, and building blocks of logic circuits constructed from them, but have not been investigated to date. Here, the first all-polymer BHJ-based OECTs are reported, consisting of a blend of new p-type ladder conjugated polymer and a state-of-the-art n-type ladder polymer. The whole ladder-type polymer BHJ also proves that side chains are not necessary for good ion transport. Instead, the polymer nanostructures play a critical role in the ion penetration and transportation and thus in the device performance. It also provides a facile strategy and simplifies the fabrication process, forgoing the need to pattern multiple active layers. In addition, the development of complementary metal-oxide-semiconductor (CMOS)-like OECTs allows the pursuit of advanced functional logic circuitry, including inverters and NAND gates, as well as for amplifying electrophysiology signals. This work opens a new approach to the design of new materials for OECTs and will contribute to the development of organic heterojunctions for ambipolar OECTs toward high-performing logic circuits.

Metastable Dion-Jacobson 2D structure enables efficient and stable perovskite solar cells.

The performance of three-dimensional (3D) organic-inorganic halide perovskite solar cells (PSCs) can be enhanced through surface treatment with 2D layered perovskites that have efficient charge transport. We maximized hole transport across the layers of a metastable Dion-Jacobson (DJ) 2D perovskite that tuned the orientational arrangements of asymmetric bulky organic molecules. The reduced energy barrier for hole transport increased out-of-plane transport rates by a factor of 4 to 5, and the power conversion efficiency (PCE) for the 2D PSC was 4.9%. With the metastable DJ 2D surface layer, the PCE of three common 3D PSCs was enhanced by approximately 12 to 16% and could reach approximately 24.7%. For a triple-cation­mixed-halide PSC, 90% of the initial PCE was retained after 1000 hours of 1-sun operation at ~40°C in nitrogen.

Annealing sequence dependent open-circuit voltage of inverted polymer solar cells attributable to interfacial chemical reaction between top electrodes and photoactive layers.

The ability to laminate and delaminate top metal contacts during the processing and testing of inverted polymer solar cells has led us to uncover the peculiar dependence of their open-circuit voltage (V(oc)) on the annealing sequence. Specifically, thermally annealing inverted polymer solar cells having bulk-heterojunction photoactive layers after top electrode deposition above 100 °C leads to lower V(oc) compared to analogous devices with unannealed photoactive layers or photoactive layers that have been annealed prior to metal electrode deposition. This reduction in V(oc), however, can be reversed when the top electrodes are replaced. This observation is thus a strong indication that such changes in V(oc) with annealing sequence are manifestations of changes at the top electrode-photoactive layer interface, and not structural changes in the bulk of the photoactive layer. Electronic characterization conducted on the photoactive layers and metal contacts after dissection of the polymer solar cells via delamination suggests the reduction of V(oc) on thermal annealing in the presence of the metal top contacts to stem from an interfacial chemical reaction between the photoactive layers and the metal electrodes. This chemically generated interfacial layer is removed upon electrode delamination, effectively reverting the V(oc) to its original value prior to thermal annealing when the top electrodes are replaced.