The rapid formation of functional monolayers on silicon under mild conditions.

We report on an exceedingly mild chemical functionalization of hydrogen-terminated Si(100) with unactivated and unprotected bifunctional α,ω-dialkynes. Monolayer formation occurs rapidly in the dark, and at room temperature, from dilute solutions of an aromatic-conjugated acetylene. The method addresses the poor reactivity of p-type substrates under mild conditions. We suggest the importance of several factors, including an optimal orientation for electron transfer between the adsorbate and the Si surface, conjugation of the acetylenic function with a π-system, as well as the choice of a solvent system that favors electron transfer and screens Coulombic interactions between surface holes and electrons. The passivated Si(100) electrode is amenable to further functionalization and shown to be a viable model system for redox studies at non-oxide semiconductor electrodes in aqueous solutions.

Rh(I) complexes bearing N,N and N,P ligands anchored on glassy carbon electrodes: toward recyclable hydroamination catalysts.

A series of N,N-donor ligands (bis(pyrazol-1-yl)methane (bpm), bis(N-methylimidazol-2-yl)methane (bim), 1-(phenylmethyl)-4-(1H-pyrazol-1-yl methyl)-1H-1,2,3-triazole (PyT)), and one N,P-donor ligand precursor (1-(3,5-dimethylpyrazol-1-yl)(2-bromoethane) (dmPyBr)) were synthesized and functionalized with aniline. Diazotization of the aniline into an aryl diazonium, using nitrous acid in aqueous conditions, was performed in situ such that the ligands could be reductively adsorbed onto glassy carbon electrode surfaces. The N,N-donor ligands (bpm, bim, PyT) were immobilized in a single step, while several steps were required to immobilize the N,P-donor ligand (dmPyP) to prevent oxidation of the phosphine group. The complexation of the anchored ligands with the metal complex precursor ([Rh(CO)2(µ-Cl)]2) led to the formation of anchored Rh(I) complexes with each of the ligands (bpm, bim, PyT, dmPyP). X-ray photoelectron spectroscopy (XPS) confirmed the formation of the anchored ligands as well as the anchored complexes. The surface coverage of functionalized electrodes was estimated by means of cyclic voltammetry, and the nature of the coverage was close to being a monolayer for each immobilized complex. The anchored Rh(I) complexes were active as catalysts for the intramolecular hydroamination of 4-pentyn-1-amine to form 2-methyl-1-pyrroline.

Distance-dependent electron transfer at passivated electrodes decorated by gold nanoparticles.

The phenomenon of nanoparticles attached to an electrode passivated by an organic layer allowing efficient electron transfer between redox species in solution and the underlying electrode to be restored has resulted in Chazalviel and Allongue proposing a theory [Chazalviel, J.-N.; Allongue, P. J. Am. Chem. Soc.2011, 133, 762-764] to explain this phenomenon. The theory suggests that with electrode-organic layer-nanoparticle constructs, high exchange current densities, compared with when the nanoparticles are absent, results in the rate of electron transfer being independent of the thickness of the organic layer until a threshold thickness is exceeded. Thereafter, the thicker the organic layer, the slower the rate of electron transfer. Herein we provide the first experimental data to support this theory using a single experimental system that can show the transition from thickness independent electron transfer kinetics to distant dependent kinetics. This was achieved using ethylenediamine electrodeposited on a glassy carbon electrode. Different numbers of deposition cycles were applied in order to fabricate different thicknesses of the organic film. The deposited films showed progressively greater blocking abilities toward ruthenium hexamine, as a redox active probe in solution, as the films got thicker. Electron transfer kinetics of nanoparticle-decorated surfaces showed a change from thickness independent to thickness dependent as the organic layer exceeded an average thickness of 20 Å. Electrochemical impedance spectroscopy, cyclic voltammetry, scanning electron microscopy, ellipsometry, and atomic force microscopy were used to characterize the fabricated surfaces.

The influence of organic-film morphology on the efficient electron transfer at passivated polymer-modified electrodes to which nanoparticles are attached.

The impact of polymer-film morphology on the electron-transfer process at electrode/organic insulator/nanomaterial architectures is studied. The experimental data are discussed in the context of the most recent theory modelling the nanoparticle-mediated electron-transfer process at electrode/insulator/nanomaterial architectures proposed by Chazalviel and Allongue [J. Am. Chem. Soc. 2011, 133, 762-764]. A previous report [Anal. Chem. 2013, 85, 1073-1080] by us qualitatively verified the theory and demonstrates a transition from thickness-independent to thickness-dependent electron transfer as the layer thickness exceeds a certain threshold. This follow-up study explores a different polymer, poly(phenylenediamine), and focuses on the effect of the uniformity of organic film on electron transfer at these hybrid structures. Electron-transfer kinetics of modified surfaces, which were assessed using the redox species Ru(NH3)6(3+) in aqueous solution, showed that a thickness-dependent electron-transfer regime is achieved with poly(phenylenediamine). This is attributed to the sufficiently thin films never being fabricated with this polymer. Rather, it is suggested that thin poly(phenylenediamine) layers have a globular structure with poor film homogeneity and pinhole defects.

Grafting of poly(ethylene glycol) on click chemistry modified Si(100) surfaces.

Poly(ethylene glycol) (PEG) is one of the most extensively studied antifouling coatings due to its ability to reduce protein adsorption and improve biocompatibility. Although the use of PEG for antifouling coatings is well established, the stability and density of PEG layers are often inadequate to provide optimum antifouling properties. To improve on these shortcomings, we employed the stepwise construction of PEG layers onto a silicon surface. Acetylene-terminated alkyl monolayers were attached to nonoxidized crystalline silicon surfaces via a one-step hydrosilylation procedure with 1,8-nonadiyne. The acetylene-terminated surfaces were functionalized via a copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction of the surface-bound alkynes with an azide to produce an amine terminated layer. The amine terminated layer was then further conjugated with PEG to produce an antifouling surface. The antifouling surface properties were investigated by testing adsorption of human serum albumin (HSA) and lysozyme (Lys) onto PEG layers from phosphate buffer solutions. Detailed characterization of protein fouling was carried out with X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) combined with principal component analysis (PCA). The results revealed no fouling of albumin onto PEG coatings whereas the smaller protein lysozyme adsorbed to a very low extent.

Depth-resolved chemical modification of porous silicon by wavelength-tuned irradiation.

The ability to impart discrete surface chemistry to the inside and outside of mesoporous silicon is of great importance for a range of biomedical applications, from selective (bio)sensing to tissue-specific drug delivery. Here we present a generic strategy toward achieving depth-resolved functionalization of the external and internal porous surfaces by a simple change in the wavelength of the light being used to promote surface chemical reactions. UV-assisted hydrosilylation, limited by the penetration depth of UV light, is used to decorate the outside of the mesoporous structure with carboxylic acid molecules, and white light illumination triggers the attachment of dialkyne molecules to the inner porous matrix.

Studies on the effect of solvents on self-assembled monolayers formed from organophosphonic acids on indium tin oxide.

The preparation of self-assembled monolayers (SAMs) of organophosphonic acids on indium tin oxide (ITO) surfaces from different solvents (triethylamine, ethyl ether, tetrahydofuran (THF), pyridine, acetone, methanol, acetonitrile, dimethyl sulfoxide (DMSO), or water) has been performed with some significant differences observed. Cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), scanning tunneling microscopy (STM), and contact angle measurement demonstrated that the quality of SAMs depends critically on the choice of solvents. Higher density, more stable monolayers were formed from solvents with low dielectric constants and weak interactions with the ITO. It was concluded low dielectric solvents that were inert to the ITO gave monolayers that were more stable with a higher density of surface bound molecules because higher dielectric constant solvents and solvents that coordinate with the surface disrupted SAM formation.

The fabrication of stable gold nanoparticle-modified interfaces for electrochemistry.

Forming stable gold nanoparticle (AuNP)-modified surface is important for a number of applications including sensing and electrocatalysis. Herein, tethering AuNPs to glassy carbon (GC) surfaces using surface bound diazonium salts is investigated as a strategy to produce stable AuNP surfaces. GC electrodes are first modified with 4-aminophenyl (GC-Ph-NH(2)), and then the terminal amine groups are converted to diazonium groups by incubating the GC-Ph-NH(2) interface in NaNO(2) and HCl solution to form a 4-phenyl diazonium chloride-modified interface (GC-Ph-N(2)(+)Cl(-)). Subsequently AuNPs are immobilized on the interface by electrochemical reduction to give a 4-phenyl AuNP-modified interface (GC-Ph-AuNP). For comparison, 4-aminophenyl AuNP- and 4-thiophenol AuNP-modified GC interfaces (GC-Ph-S-AuNP and GC-Ph-NH-AuNP), in which AuNPs are tethered to the surfaces by forming S-Au and NH-Au bond, respectively, were also prepared. Cyclic voltammetry, electrochemical impedance spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy are used to characterize these fabricated interfaces. The AuNP on GC-Ph-AuNP surfaces demonstrate good stability under sonication in Milli-Q water, during electrochemical treatment in 0.05 M H(2)SO(4) solution, and over several weeks. By contrast, the GC-Ph-NH-AuNP and GC-Ph-S-AuNP surfaces showed significant particle losses under equivalent conditions.

Oxidative acetylenic coupling reactions as a surface chemistry tool.

A novel method to prepare redox monolayers on silicon electrodes has been developed that employs Cu(I)-catalyzed oxidative acetylenic coupling reactions for molecular electronic type applications. As the first case study, ethynylferrocene was covalently immobilized onto an acetylene-terminated monolayer on a Si(100) surface to give a 1,3-diyne (C≡C-C≡C-) linked redox assembly. The derivatization process requires no protection/de-protection steps, nor activation procedures. The effect of the conjugated diyne linkage on the rate of electron transfer between tethered ferrocenyl units and the silicon electrode is benchmarked against well-established "click" products (i.e. 1,2,3-triazole linkage). The surfaces, after each step, are characterized thoroughly using X-ray reflectivity (XRR), X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The coupling chemistry provides a useful strategy for functionalizing silicon surfaces and contributes to an expanding repertoire of wet chemistry routes for the functionalization of solid substrates.

Some more observations on the unique electrochemical properties of electrode-monolayer-nanoparticle constructs.

Physical and electrochemical properties of gold nanoparticle-based electrodes are highlighted. Polycrystalline gold electrodes are passivated by a self-assembled monolayer, then the immobilization of gold nanoparticles "switch on" the electrochemical reactivity of ruthenium. Herein, gap-mode Raman studies show that the location of the nanoparticles is on the top of the monolayer, meaning that the "switching on" cannot be attributed to a direct electrical contact between nanoparticles and the gold support. This "switching on" feature is also not affected by the size of the gold nanoparticles with a range of diameters between 4 and 67 nm. Further, the charge of the nanoparticles is investigated by grafting chemical groups onto the nanoparticles which is observed to alter the electron-transfer kinetics. The variation in rate constant however is insufficient to attribute the "switching on" phenomenon to a possible adsorption of the redox species onto the nanoparticles.

Effects of Surface Epitope Coverage on the Sensitivity of Displacement Assays that Employ Modified Nanoparticles: Using Bisphenol A as a Model Analyte.

With the ever-increasing use of nanoparticles in immunosensors, a fundamental study on the effect of epitope density is presented herein, with a small molecule epitope, on the performance of the displacement assay format in an enzyme-linked immunosorbent assay (ELISA). Thiolated bisphenol A (BPA) functionalized gold nanoparticles (cysBPAv-AuNPs) and specific anti-BPA antibodies are employed for this purpose. It is shown that the displacement of cysBPAv-AuNPs bound to the immobilized antibodies was influenced by both the avidity of bound cysBPAv-AuNPs and the concentration of free BPA to displace it. The importance of surface epitope density was that it changed the number of epitopes in close proximity to the antibody-binding site. This then influenced the avidity of cysBPAv-AuNPs bound to the immobilized antibody. Furthermore, the molar epitope concentration in an assay appears to affect the degree of antibody binding site saturation. Controlling surface epitope density of the functionalized nanoparticles and molar epitope concentration in an assay leads to a decrease of the concentration of free BPA required to displace the bound cysBPAv-AuNP, and hence better assay performance with regards to the D50 value and dynamic range in the displacement assay.

Zwitterionic phenyl layers: finally, stable, anti-biofouling coatings that do not passivate electrodes.

Organic coatings on electrodes that limit biofouling by proteins but are of sufficiently low impedance to still allow Faradaic electrochemistry to proceed at the underlying electrode are described for the first time. These organic coatings formed using simple aryl diazonium salts present a zwitterionic surface and exhibit good electrochemical stability. The layers represent a low impedance alternative to the oligo (ethylene glycol) (OEG)-based anti-biofouling coatings and are expected to find applications in electrochemical biosensors and implantable electrodes. Two different zwitterionic layers grafted to glassy carbon surfaces are presented and compared to a number of better-known surfaces, including OEG-based phenyl-layer-grafted glassy carbon surfaces and OEG alkanethiol SAMs coated on gold, to allow the performance of these new layers to be compared to the body of work on other anti-biofouling surfaces. The results suggest that phenyl-based zwitterionic coatings are as effective as the OEG SAMs at resisting the nonspecific adsorption of bovine serum albumin and cytochrome c, as representative anionic and cationic proteins at physiological pH, whereas the impedance of the zwitterionic phenyl layers are two orders of magnitude lower than OEG SAMs.