Separation and Characterization of Plastic Waste Packaging Contaminated with Food Residues.

In this paper, we present the development of a novel processing technology to tackle hard-to-recycle plastic packaging waste contaminated with food residues. The proof-of-concept (POC) technology can effectively separate food residual amounts from plastic waste materials to a level acceptable for further re-use or recycling of the plastic packaging. To assess this technology, we have conducted spectroscopic, thermal, and calorimetric characterizations of the obtained fractions, such as cleaned mixed plastics (CMP), food waste with mixed plastics (FWMP), and a mixture of microplastics (MP). The analyses were carried out with the aid of Fourier-Transform Infrared spectroscopy (FT-IR), Thermo-Gravimetric Analysis (TGA), Microcone Combustion Calorimetry (MCC), and 'bomb' calorimetry. The highest ratio of CMP to FWMP and the lowest amount of MP were obtained utilizing 700 rpm blade rotational speed and 15 s residence time of contaminated plastics in a cutting mill chamber. The plastics were freed from food contamination by 93-97%, which highlights a strong potential of the POC as a solution for 'dry-cleaning' of similar wastes on a larger scale. The main components of the CMP fraction were low-density polyethylene (LDPE), polypropylene (PP), and polyethylene terephthalate (PET), which are recyclable plastics. The knowledge and understanding of thermal degradation behaviours and calorimetric attributes of separated fractions, determined in this study, are essential in informing the industrial players using pyrolysis as a technique for recycling plastics.

UVC inactivation of MS2-phage in drinking water - Modelling and field testing.

UVC disinfection has been recognised by the WHO as an effective disinfection treatment to provide decentralized potable water. Under real conditions there are still unknowns that limit this application including the influence of suspended solids and natural organic matter. This work aims to investigate the influence of two key parameters, suspended solids and natural organic matter, on the efficiency of UVC disinfection of surface water to achieve the drinking water quality requirements established by the WHO for point of use (POU) technologies. Kaolinite (turbidity agent) and humic acids (HA, model of organic matter) were used in a factorial design of experiments (Turbidity from 0 to 5 NTU, and HA from 0 to 3.5 mg/L) to investigate their effect on UVC inactivation of MS2 phage in surface water. A collimated beam (12 W) and a commercial UVC disinfection flow system (16 W) designed to provide drinking water at households were used. The UVC flow system both in the laboratory and in the field was able to achieve the reduction requirements established by WHO (LRV >3.5 for all tested conditions), confirming the good performance of the studied UVC disinfection system. The results found in the lab were used to establish a numerical model that predicts the disinfection rate constant as a function of water turbidity and transmittance at 254 nm (confidence level>95%). The model permitted to elucidate the critical effect of low concentrations of HA in reducing the inactivation rate by 40% for 3.5 mg/L-HA compared with 0, the non-significant detrimental effect of turbidity lower than 5 NTU, and the lack of synergistic effects between both parameters at these levels. The UVC flow system was also tested in the field, in Tzabalho, Chiapas (Mexico), and Antioquia (Colombia), with spiked MS2 into natural surface water. This investigation opens a potential application to monitor the performance of UVC systems with surface water by monitoring transmittance at 254 nm as a tool to control UVC domestic systems to deliver safe drinking water in a household without the need of expensive and laborious biological monitoring tools.

Impairment of the bacterial biofilm stability by triclosan.

The accumulation of the widely-used antibacterial and antifungal compound triclosan (TCS) in freshwaters raises concerns about the impact of this harmful chemical on the biofilms that are the dominant life style of microorganisms in aquatic systems. However, investigations to-date rarely go beyond effects at the cellular, physiological or morphological level. The present paper focuses on bacterial biofilms addressing the possible chemical impairment of their functionality, while also examining their substratum stabilization potential as one example of an important ecosystem service. The development of a bacterial assemblage of natural composition--isolated from sediments of the Eden Estuary (Scotland, UK)--on non-cohesive glass beads (<63 µm) and exposed to a range of triclosan concentrations (control, 2-100 µg L(-1)) was monitored over time by Magnetic Particle Induction (MagPI). In parallel, bacterial cell numbers, division rate, community composition (DGGE) and EPS (extracellular polymeric substances: carbohydrates and proteins) secretion were determined. While the triclosan exposure did not prevent bacterial settlement, biofilm development was increasingly inhibited by increasing TCS levels. The surface binding capacity (MagPI) of the assemblages was positively correlated to the microbial secreted EPS matrix. The EPS concentrations and composition (quantity and quality) were closely linked to bacterial growth, which was affected by enhanced TCS exposure. Furthermore, TCS induced significant changes in bacterial community composition as well as a significant decrease in bacterial diversity. The impairment of the stabilization potential of bacterial biofilm under even low, environmentally relevant TCS levels is of concern since the resistance of sediments to erosive forces has large implications for the dynamics of sediments and associated pollutant dispersal. In addition, the surface adhesive capacity of the biofilm acts as a sensitive measure of ecosystem effects.

The stabilisation potential of individual and mixed assemblages of natural bacteria and microalgae.

It is recognized that microorganisms inhabiting natural sediments significantly mediate the erosive response of the bed ("ecosystem engineers") through the secretion of naturally adhesive organic material (EPS: extracellular polymeric substances). However, little is known about the individual engineering capability of the main biofilm components (heterotrophic bacteria and autotrophic microalgae) in terms of their individual contribution to the EPS pool and their relative functional contribution to substratum stabilisation. This paper investigates the engineering effects on a non-cohesive test bed as the surface was colonised by natural benthic assemblages (prokaryotic, eukaryotic and mixed cultures) of bacteria and microalgae. MagPI (Magnetic Particle Induction) and CSM (Cohesive Strength Meter) respectively determined the adhesive capacity and the cohesive strength of the culture surface. Stabilisation was significantly higher for the bacterial assemblages (up to a factor of 2) than for axenic microalgal assemblages. The EPS concentration and the EPS composition (carbohydrates and proteins) were both important in determining stabilisation. The peak of engineering effect was significantly greater in the mixed assemblage as compared to the bacterial (x 1.2) and axenic diatom (x 1.7) cultures. The possibility of synergistic effects between the bacterial and algal cultures in terms of stability was examined and rejected although the concentration of EPS did show a synergistic elevation in mixed culture. The rapid development and overall stabilisation potential of the various assemblages was impressive (x 7.5 and ×9.5, for MagPI and CSM, respectively, as compared to controls). We confirmed the important role of heterotrophic bacteria in "biostabilisation" and highlighted the interactions between autotrophic and heterotrophic biofilm consortia. This information contributes to the conceptual understanding of the microbial sediment engineering that represents an important ecosystem function and service in aquatic habitats.