RESUMEN
Perovskite solar cells (PSCs) comprise a solid perovskite absorber sandwiched between several layers of different charge-selective materials, ensuring unidirectional current flow and high voltage output of the devices1,2. A 'buffer material' between the electron-selective layer and the metal electrode in p-type/intrinsic/n-type (p-i-n) PSCs (also known as inverted PSCs) enables electrons to flow from the electron-selective layer to the electrode3-5. Furthermore, it acts as a barrier inhibiting the inter-diffusion of harmful species into or degradation products out of the perovskite absorber6-8. Thus far, evaporable organic molecules9,10 and atomic-layer-deposited metal oxides11,12 have been successful, but each has specific imperfections. Here we report a chemically stable and multifunctional buffer material, ytterbium oxide (YbOx), for p-i-n PSCs by scalable thermal evaporation deposition. We used this YbOx buffer in the p-i-n PSCs with a narrow-bandgap perovskite absorber, yielding a certified power conversion efficiency of more than 25%. We also demonstrate the broad applicability of YbOx in enabling highly efficient PSCs from various types of perovskite absorber layer, delivering state-of-the-art efficiencies of 20.1% for the wide-bandgap perovskite absorber and 22.1% for the mid-bandgap perovskite absorber, respectively. Moreover, when subjected to ISOS-L-3 accelerated ageing, encapsulated devices with YbOx exhibit markedly enhanced device stability.
RESUMEN
The tunable bandgaps and facile fabrication of perovskites make them attractive for multi-junction photovoltaics1,2. However, light-induced phase segregation limits their efficiency and stability3-5: this occurs in wide-bandgap (>1.65 electron volts) iodide/bromide mixed perovskite absorbers, and becomes even more acute in the top cells of triple-junction solar photovoltaics that require a fully 2.0-electron-volt bandgap absorber2,6. Here we report that lattice distortion in iodide/bromide mixed perovskites is correlated with the suppression of phase segregation, generating an increased ion-migration energy barrier arising from the decreased average interatomic distance between the A-site cation and iodide. Using an approximately 2.0-electron-volt rubidium/caesium mixed-cation inorganic perovskite with large lattice distortion in the top subcell, we fabricated all-perovskite triple-junction solar cells and achieved an efficiency of 24.3 per cent (23.3 per cent certified quasi-steady-state efficiency) with an open-circuit voltage of 3.21 volts. This is, to our knowledge, the first reported certified efficiency for perovskite-based triple-junction solar cells. The triple-junction devices retain 80 per cent of their initial efficiency following 420 hours of operation at the maximum power point.
RESUMEN
Halide perovskites are a compelling candidate for the next generation of clean-energy-harvesting technologies owing to their low cost, facile fabrication and outstanding semiconductor properties. However, photovoltaic device efficiencies are still below practical limits and long-term stability challenges hinder their practical application. Current evidence suggests that strain in halide perovskites is a key factor in dictating device efficiency and stability. Here we outline the fundamentals of strain within halide perovskites relevant to photovoltaic applications and rationalize approaches to characterize the phenomenon. We examine recent breakthroughs in eliminating the adverse impacts of strain, enhancing both device efficiencies and operational stabilities. Finally, we discuss further challenges and outline future research directions for placing stress and strain studies at the forefront of halide perovskite research. An extensive understanding of strain in halide perovskites is needed, which would allow effective strain management and drive further enhancements in efficiencies and stabilities of perovskite photovoltaics.
RESUMEN
In many optoelectronic applications, patterning is required for functional and/or aesthetic purposes. However, established photolithographic technique cannot be applied directly to the hybrid perovskites, which are considered as promising candidates for optoelectronic applications. In this work, a wettability-assisted photolithography (WAP) process, which employs photolithography and one-step solution process to deposit hybrid perovskite, was developed for fabricating patterned hybrid perovskite films. Uniform pinhole-free hybrid perovskite films with sharp-edged micropatterns of any shapes can be constructed through the WAP process. Semitransparent solar cells with an adjustable active layer average visible transmittance of a wide range from 20.0% to 100% and regular solar cells based on patterned CH3NH3PbI3 perovskite films were fabricated to demonstrate that the WAP process was compatible with the manufacturing process of optoelectronic devices. With the widely equipped photolithographic facilities in the modern semiconductor industry, we believe the WAP process have a great potential in the industrial production of functionally or aesthetically patterned hybrid perovskite devices.
RESUMEN
High-efficiency Pb-Sn narrow-bandgap perovskite solar cells (PSCs) heavily rely on PEDOT:PSS as the hole-transport layer (HTL) owing to its excellent electrical conductivity, dopant-free nature, and facile solution processability. However, the shallow work function (WF) of PEDOT:PSS consequently results in severe minority carrier recombination at the perovskite/HTL interface. Here, we tackle this issue by an in situ interface engineering strategy using a new molecule called 2-fluoro benzylammonium iodide (FBI) that suppresses nonradiative recombination near the Pb-Sn perovskite (FA0.6MA0.4Pb0.4Sn0.6I3)/HTL bottom interface. The WF of PEDOT:PSS increases by 0.1 eV with FBI modification, resulting in Pb-Sn PSCs with 20.5% efficiency and an impressive VOC of 0.843 V. Finally, we have successfully transferred our in situ buried interface modification strategy to fabricate blade-coated FA0.6MA0.4Pb0.4Sn0.6I3 PSCs with 18.3% efficiency and an exceptionally high VOC of 0.845 V.
RESUMEN
Perovskite light-emitting diodes (PeLEDs) are the next promising display technologies because of their high color purity and wide color gamut, while two classical emitter forms, i.e., polycrystalline domains and quantum dots, are encountering bottlenecks. Weak carrier confinement of large polycrystalline domains leads to inadequate radiative recombination, and surface ligands on quantum dots are the main annihilation sites for injected carriers. Here, pinpointing these issues, we screened out an amphoteric agent, namely, 2-(2-aminobenzoyl)benzoic acid (2-BA), to precisely control the in situ growth of FAPbI3 (FA: formamidine) nanodomains with enhanced space confinement, preferred crystal orientation, and passivated trap states on the transport-layer substrate. The amphoteric 2-BA performs bidentate chelating functions on the formation of ultrasmall perovskite colloids (<1 nm) in the precursor, resulting in a smoother FAPbI3 emitting layer. Based on monodispersed and homogeneous nanodomain films, a near-infrared PeLED device with a champion efficiency of >22% plus enhanced T80 operational stability was achieved. The proposed perovskite nanodomain film tends to be a mainstream emitter toward the performance breakthrough of PeLED devices covering visible wavelengths beyond infrared.
RESUMEN
Interest in photovoltaics (PVs) based on Earth-abundant halide perovskites has increased markedly in recent years owing to the remarkable properties of these materials and their suitability for energy-efficient and scalable solution processing. Formamidinium lead triiodide (FAPbI3)-rich perovskite absorbers have emerged as the frontrunners for commercialization, but commercial success is reliant on the stability meeting the highest industrial standards and the photoactive FAPbI3 phase suffers from instabilities that lead to degradation - an effect that is accelerated under working conditions. Here, we critically assess the current understanding of these phase instabilities and summarize the approaches for stabilizing the desired phases, covering aspects from fundamental research to device engineering. We subsequently analyse the remaining challenges for state-of-the-art perovskite PVs and demonstrate the opportunities to enhance phase stability with ongoing materials discovery and in operando analysis. Finally, we propose future directions towards upscaling perovskite modules, multijunction PVs and other potential applications.
Asunto(s)
Compuestos de Calcio , Planeta Tierra , Ingeniería , IndustriasRESUMEN
Solar cells capable of light-harvesting during daytime and light-emission at night are multifunctional semiconductor devices with many potential applications. Here, it is reported that halide perovskite heterojunction interfaces can be refined to yield stable and efficient solar cells. The cell can also operate effectively as an ultralow-voltage light-emitting diode (LED) with a peak external quantum efficiency of electroluminescence (EQEEL ) of 3.3%. Spectroscopic and microscopic studies reveal that double-heterojunction refinement with wide-bandgap salts is key to densifying the packing of perovskite grains and enlarging the bandgaps of the perovskite surfaces that are in contact with charge-transport semiconductors. The refined perovskite enables a simple device with dual actions of solar cells and LEDs. This type of all-in-one device has the potential to be used in multifunctional harvesting-storage-utilization (HSU) systems.
RESUMEN
Inverted-structure metal halide perovskite solar cells (PSCs) have attractive advantages like low-temperature processability and outstanding device stability. The two-step sequential deposition method shows the benefits of easy fabrication and decent performance repeatability. Nevertheless, it is still challenging to achieve high-performance inverted PSCs with similar or equal power conversion efficiencies (PCEs) compared to the regular-structure counterparts via this deposition method. Here, an improved two-step sequential deposition technique is demonstrated via treating the bottom organic hole-selective layer with the binary modulation system composed of a polyelectrolyte and an ammonium salt. Such improved sequential deposition method leads to the spontaneous refinement of up and buried interfaces for the perovskite films, contributing to high film quality with significantly reduced defect density and better charge transportation. As a result, the optimized PSCs show a large enhancement in the open-circuit voltage by 100 mV and a dramatic lift in the PCE from 18.1% to 23.4%, delivering the current state-of-the-art performances for inverted PSCs. Moreover, good operational and thermal stability is achieved upon the improved inverted PSCs. This innovative strategy helps gain a deeper insight into the perovskite crystal growth and defect modulation in the inverted PSCs based on the two-step sequential deposition method.
RESUMEN
A prerequisite for commercializing perovskite photovoltaics is to develop a swift and eco-friendly synthesis route, which guarantees the mass production of halide perovskites in the industry. Herein, a green-solvent-assisted mechanochemical strategy is developed for fast synthesizing a stoichiometric δ-phase formamidinium lead iodide (δ-FAPbI3 ) powder, which serves as a high-purity precursor for perovskite film deposition with low defects. The presynthesized δ-FAPbI3 precursor possesses high concentration of micrometer-sized colloids, which are in favor of preferable crystallization by spontaneous nucleation. The resultant perovskite films own preferred crystal orientations of cubic (100) plane, which is beneficial for superior carrier transport compared to that of the films with isotropic crystal orientations using "mixture of PbI2 and FAI" as precursors. As a result, high-performance perovskite solar cells with a maximum power conversion efficiency of 24.2% are obtained. Moreover, the δ-FAPbI3 powder shows superior storage stability for more than 10 months in ambient environment (40 ± 10% relative humidity), being conducive to a facile and practical storage for further commercialization.
RESUMEN
There exists a considerable density of interaggregate grain boundaries (GBs) and intra-aggregate GBs in polycrystalline perovskites. Mitigation of intra-aggregate GBs is equally notable to that of interaggregate GBs as intra-aggregate GBs can also cause detrimental effects on the photovoltaic performances of perovskite solar cells (PSCs). Here, we demonstrate full-scale GB mitigation ranging from nanoscale intra-aggregate to submicron-scale interaggregate GBs, by modulating the crystallization kinetics using a judiciously designed brominated arylamine trimer. The optimized GB-mitigated perovskite films exhibit reduced nonradiative recombination, and their corresponding mesostructured PSCs show substantially enhanced device efficiency and long-term stability under illumination, humidity, or heat stress. The versatility of our strategy is also verified upon applying it to different categories of PSCs. Our discovery not only specifies a rarely addressed perspective concerning fundamental studies of perovskites at nanoscale but also opens a route to obtain high-quality solution-processed polycrystalline perovskites for high-performance optoelectronic devices.
RESUMEN
OBJECTIVE: To investigate the effects of epidural labor analgesia and natural delivery without analgesia on labor duration, pain, uterine continuous contraction time, abnormal labor process and complications. METHODS: A total of 220 primiparas in our hospital were selected and divided into two groups according to whether they accepted epidural labor analgesia, including 146 cases in the study group and 74 cases in the blank group. Primiparas in the study group received epidural block analgesia, and those in the blank group received routine labor without analgesia. Duration of the first, second and third stages of labor was observed and recorded. The NRS pain score and uterine continuous contraction time were detected before and after the analgesia. The abnormal situation and complications of primiparas in the two groups were recorded. RESULTS: Compared with those in the blank group, the duration of the first stage of labor and the amount of postpartum hemorrhage in the study group were decreased (all P<0.001). The primiparas' NRS score in the study group was lower than that in the blank group at 10 min, 15 min, 30 min, 60 min and 120 min after analgesia (all P<0.001). The duration of uterine contractions in the study group was lower than that in the blank group at 15 min, 30 min and 60 min after analgesia (all P<0.01). Compared with those in the blank group, primiparas in the study group had a higher probability of active phase arrest in the process of labor (P<0.05). Compared with the blank group, the probability of urinary retention in the study group increased (P<0.05). CONCLUSION: The effect of epidural labor analgesia is better, which is conducive to shorten the time of the first stage of labor, good analgesic effect, shorter duration of the uterine contraction and higher safety.
RESUMEN
Surfaces and heterojunction interfaces, where defects and energy levels dictate charge-carrier dynamics in optoelectronic devices, are critical for unlocking the full potential of perovskite semiconductors. In this progress report, chemical structures of perovskite surfaces are discussed and basic physical rules for the band alignment are summarized at various perovskite interfaces. Common perovskite surfaces are typically decorated by various compositional and structural defects such as residual surface reactants, discrete nanoclusters, reactions by products, vacancies, interstitials, antisites, etc. Some of these surface species induce deep-level defect states in the forbidden band forming very harmful charge-carrier traps and affect negatively the interface band alignments for achieving optimal device performance. Herein, an overview of research progresses on surface and interface engineering is provided to minimize deep-level defect states. The reviewed subjects include selection of interface and substrate buffer layers for growing better crystals, materials and processing methods for surface passivation, the surface catalyst for microstructure transformations, organic semiconductors for charge extraction or injection, heterojunctions with wide bandgap perovskites or nanocrystals for mitigating defects, and electrode interlayer for preventing interdiffusion and reactions. These surface and interface engineering strategies are shown to be critical in boosting device performance for both solar cells and light-emitting diodes.
RESUMEN
The performance of perovskite photovoltaics is fundamentally impeded by the presence of undesirable defects that contribute to non-radiative losses within the devices. Although mitigating these losses has been extensively reported by numerous passivation strategies, a detailed understanding of loss origins within the devices remains elusive. Here, we demonstrate that the defect capturing probability estimated by the capture cross-section is decreased by varying the dielectric response, producing the dielectric screening effect in the perovskite. The resulting perovskites also show reduced surface recombination and a weaker electron-phonon coupling. All of these boost the power conversion efficiency to 22.3% for an inverted perovskite photovoltaic device with a high open-circuit voltage of 1.25 V and a low voltage deficit of 0.37 V (a bandgap ~1.62 eV). Our results provide not only an in-depth understanding of the carrier capture processes in perovskites, but also a promising pathway for realizing highly efficient devices via dielectric regulation.
RESUMEN
Perovskite solar cells (PSCs) commonly exhibit significant performance degradation due to ion migration through the top charge transport layer and ultimately metal electrode corrosion. Here, we demonstrate an interfacial management strategy using a boron chloride subphthalocyanine (Cl6SubPc)/fullerene electron-transport layer, which not only passivates the interfacial defects in the perovskite, but also suppresses halide diffusion as evidenced by multiple techniques, including visual element mapping by electron energy loss spectroscopy. As a result, we obtain inverted PSCs with an efficiency of 22.0% (21.3% certified), shelf life of 7000 h, T80 of 816 h under damp heat stress (compared to less than 20 h without Cl6SubPc), and initial performance retention of 98% after 2000 h at 80 °C in inert environment, 90% after 2034 h of illumination and maximum power point tracking in ambient for encapsulated devices and 95% after 1272 h outdoor testing ISOS-O-1. Our strategy and results pave a new way to move PSCs forward to their potential commercialization solidly.
RESUMEN
Understanding the fundamental properties of buried interfaces in perovskite photovoltaics is of paramount importance to the enhancement of device efficiency and stability. Nevertheless, accessing buried interfaces poses a sizeable challenge because of their non-exposed feature. Herein, the mystery of the buried interface in full device stacks is deciphered by combining advanced in situ spectroscopy techniques with a facile lift-off strategy. By establishing the microstructure-property relations, the basic losses at the contact interfaces are systematically presented, and it is found that the buried interface losses induced by both the sub-microscale extended imperfections and lead-halide inhomogeneities are major roadblocks toward improvement of device performance. The losses can be considerably mitigated by the use of a passivation-molecule-assisted microstructural reconstruction, which unlocks the full potential for improving device performance. The findings open a new avenue to understanding performance losses and thus the design of new passivation strategies to remove imperfections at the top surfaces and buried interfaces of perovskite photovoltaics, resulting in substantial enhancement in device performance.
RESUMEN
Lead halide perovskite films have witnessed rapid progress in optoelectronic devices, whereas polycrystalline heterogeneities and serious native defects in films are still responsible for undesired recombination pathways, causing insufficient utilization of photon-generated charge carriers. Here, radiation-enhanced polycrystalline perovskite films with ultralong carrier lifetimes exceeding 6 µs and single-crystal-like electron-hole diffusion lengths of more than 5 µm are achieved. Prolongation of charge-carrier activities is attributed to the electronic structure regulation and the defect elimination at crystal boundaries in the perovskite with the introduction of phenylmethylammonium iodide. The introduced electron-rich anchor molecules around the host crystals prefer to fill the halide/organic vacancies at the boundaries, rather than form low-dimensional phases or be inserted into the original lattice. The weakening of the electron-phonon coupling and the excitonic features of the photogenerated carriers in the optimized films, which together contribute to the enhancement of carrier separation and transportation, are further confirmed. Finally the resultant perovskite films in fully operating solar cells with champion efficiency of 23.32% are validated and a minimum voltage deficit of 0.39 V is realized.
RESUMEN
The huge performance enhancements of the organometal halide perovskite solar cells (OHPSCs) have appealed enormous attention within recent ten years. Although the rapid growth of the device power conversion efficiency (PCE) has attained over 25%, the contamination of health-hazardous components still holds back its sustainable applications. To reduce the lead usage, many groups have tried chemical lead reduction solutions: substituting the lead by other group 14 metal elements to realize the low-lead OHPSCs. Unfortunately, neither the PCE nor the stability, low-lead OHPSCs all lag far behind the state-of-the-art conventional lead-based OHPSCs. In this work, we present a physical lead reduction (PLR) concept by reducing the perovskite film thickness to restrict the perovskite hazard risk with minor scarification in device performances. Through the simulation of transfer matrix model, we theoretically demonstrated that by introducing the optical space layer, the device PCE could maintain 96% of the original maximum value while attenuating the perovskite film thickness to one-third. This means that the usage of lead can be reduced by â¼70% with PLR concept, which could have broad appeal as a new lead reduction strategy towards high performance OHPSCs.
RESUMEN
Metal halide perovskite films are endowed with the nature of ions and polycrystallinity. Formamidinium iodide (FAI)-based perovskite films, which include large cations (FA) incorporated into the crystal lattice, are most likely to induce local defects due to the presence of the unreacted FAI species. Here, a diboron-assisted strategy is demonstrated to control the defects induced by the unreacted FAI both inside the grain boundaries and at the surface regions. The diboron compound (C12 H10 B2 O4 ) can selectively react with unreacted FAI, leading to reduced defect densities. Nonradiative recombination between a perovskite film and a hole-extraction layer is mitigated considerably after the introduction of the proposed approach and charge-carrier extraction is improved as well. A champion power conversion efficiency of 21.11% is therefore obtained with a stabilized power output of 20.83% at the maximum power point for planar perovskite solar cells. The optimized device also delivers negligible hysteresis effect under various scanning conditions. This approach paves a new way for mitigating defects and improving device performance.
RESUMEN
The highest power conversion efficiencies (PCEs) reported for perovskite solar cells (PSCs) with inverted planar structures are still inferior to those of PSCs with regular structures, mainly because of lower open-circuit voltages (Voc). Here we report a strategy to reduce nonradiative recombination for the inverted devices, based on a simple solution-processed secondary growth technique. This approach produces a wider bandgap top layer and a more n-type perovskite film, which mitigates nonradiative recombination, leading to an increase in Voc by up to 100 millivolts. We achieved a high Voc of 1.21 volts without sacrificing photocurrent, corresponding to a voltage deficit of 0.41 volts at a bandgap of 1.62 electron volts. This improvement led to a stabilized power output approaching 21% at the maximum power point.