Chemical sensors detect and resolve proteome aggregation in peripheral neuropathy cell model induced by chemotherapeutic agents.

As a consequence of somatosensory nervous system injury or disease, neuropathic pain is commonly associated with chemotherapies, known as chemotherapy-induced peripheral neuropathy (CIPN). However, the mechanisms underlying CIPN-induced proteome aggregation in neuronal cells remain elusive due to limited detection tools. Herein, we present series sensors for fluorescence imaging (AggStain) and proteomics analysis (AggLink) to visualize and capture aggregated proteome in CIPN neuronal cell model. The environment-sensitive AggStain imaging sensor selectively binds and detects protein aggregation with 12.3 fold fluorescence enhancement. Further, the covalent AggLink proteomic sensor captures cellular aggregated proteins and profiles their composition via LC-MS/MS analysis. This integrative sensor platform reveals the presence of proteome aggregation in CIPN cell model and highlights its potential for broader applications in assessing proteome stability under various cellular stress conditions.

Covalent Solvatochromic Proteome Stress Sensor Based on the Schiff Base Reaction.

Covalent-type probes or sensors have been seldom reported for aggregated proteins. Herein, we reported a series of covalent solvatochromic probes to selectively modify and detect aggregated proteomes through the Schiff base reaction. Such covalent modification was discovered by serendipity using the P1 probe with an aldehyde functional group, exhibiting enhanced fluorescence intensity and unusually large blue shift upon protein aggregation. Supported by the biochemical and mass spectrometry results, we identified that this probe can modify the lysine residue of aggregated proteins selectively over folded ones via the Schiff base reaction. The generality of designing such a covalent-type probe was demonstrated in multiple probe scaffolds using different model proteins. Finally, we exploited the distinct solvatochromism of P1 after Schiff base linkage with aggregated proteins to visualize the distinct morphology of aggregated proteomes, as well as to quantify the polarity heterogeneity inside it. This work may intrigue the exploration of other chemical reaction types to covalently functionalize aggregated proteins that were difficult to analyze.

Common Pitfalls and Recommendations for Using a Turbidity Assay to Study Protein Phase Separation.

The turbidity assay is commonly exploited to study protein liquid-to-liquid phase separation (LLPS) or liquid-to-solid phase separation (LSPS) processes in biochemical analyses. Herein, we present common pitfalls of this assay caused by exceeding the detection linear range. We showed that aggregated proteins of high concentration and large particle size can lead to inaccurate quantification in multiple applications, including the optical density measurement, the thermal shift assay, and the dynamic light scattering experiment. Finally, we demonstrated that a simple sample dilution of insoluble aggregated protein (LSPS) samples or direct imaging of liquid droplets (LLPS) can address these issues and improve the accuracy of the turbidity assay.

Monitoring the Dynamics of Proteome Aggregation in Live Cells Using a Solubilized and Noncovalent Analogue of Fluorescent Protein Chromophores.

Stress-induced intracellular proteome aggregation is a hallmark and a biomarker of various human diseases. Current sensors requiring either cellular fixation or covalent modification of the entire proteome are not suitable for live-cell applications and dynamics study. Herein, we report a noncovalent, cell-permeable, and fluorogenic sensor that can reversibly bind to proteome amorphous aggregates and monitor their formation, transition, and clearance in live cells. This sensor was structurally optimized from previously reported fluorescent protein chromophores to enable noncovalent and reversible binding to aggregated proteins. Unlike all previous sensors, the noncovalent and reversible nature of this probe allows for dynamic detection of both the formation and clearance of aggregated proteome in one live-cell sample. Under different cellular stresses, this sensor reveals drastic differences in the morphology and location of aggregated proteome. Furthermore, we have shown that this sensor can detect the transition from proteome liquid-to-liquid phase separation to liquid-to-solid phase separation in a two-color imaging experiment. Overall, the sensor reported here can serve as a facile tool to screen therapeutic drugs and identify cellular pathways that ameliorate pathogenic proteome aggregation in live-cell models.

A Solvatochromic Fluorescent Probe Reveals Polarity Heterogeneity upon Protein Aggregation in Cells.

We report a crystallization-induced emission fluorophore to quantitatively interrogate the polarity of aggregated proteins. This solvatochromic probe, namely "AggRetina" probe, inherently binds to aggregated proteins and exhibits both a polarity-dependent fluorescence emission wavelength shift and a viscosity-dependent fluorescence intensity increase. Regulation of its polarity sensitivity was achieved by extending the conjugation length. Different proteins bear diverse polarity upon aggregation, leading to different resistance to proteolysis. Polarity primarily decreases during protein misfolding but viscosity mainly increases upon the formation of insoluble aggregates. We quantified the polarity of aggregated protein-of-interest in live cells via HaloTag bioorthogonal labeling, revealing polarity heterogeneity within cellular aggregates. The enriched micro-environment details inside misfolded and aggregated proteins may correlate to their bio-chemical properties and pathogenicity.

Rational Design of Crystallization-Induced-Emission Probes To Detect Amorphous Protein Aggregation in Live Cells.

Unlike amyloid aggregates, amorphous protein aggregates with no defined structures have been challenging to target and detect in a complex cellular milieu. In this study, we rationally designed sensors of amorphous protein aggregation from aggregation-induced-emission probes (AIEgens). Utilizing dicyanoisophorone as a model AIEgen scaffold, we first sensitized the fluorescence of AIEgens to a nonpolar and viscous environment mimicking the interior of amorphous aggregated proteins. We identified a generally applicable moiety (dimethylaminophenylene) for selective binding and fluorescence enhancement. Regulation of the electron-withdrawing groups tuned the emission wavelength while retaining selective detection. Finally, we utilized the optimized probe to systematically image aggregated proteome upon proteostasis network regulation. Overall, we present a rational approach to develop amorphous protein aggregation sensors from AIEgens with controllable sensitivity, spectral coverage, and cellular performance.

Covalent Probes for Aggregated Protein Imaging via Michael Addition.

Covalent chemical reactions to modify aggregated proteins are rare. Here, we reported covalent Michael addition can generally occur upon protein aggregation. Such reactivity was initially discovered by a bioinspired fluorescent color-switch probe mimicking the photo-conversion mechanism of Kaede fluorescent protein. This probe was dark with folded proteins but turned on red fluorescence (620 nm) when it non-covalently bound to misfolded proteins. Supported by the biochemical and mass spectrometry results, the probe chemoselectively reacted with the reactive cysteines of aggregated proteins via covalent Michael addition and gradually switched to green fluorescence (515 nm) upon protein aggregation. Exploiting this Michael addition chemistry in the malachite green dye derivatives demonstrated its general applicability and chemical tunability, resulting in different fluorescence color-switch responses. Our work may offer a new avenue to explore other chemical reactions upon protein aggregation and design covalent probes for imaging, chemical proteomics, and therapeutic purposes.

Stepped-Tube Backside Cavity Piezoelectric Ultrasound Transducer Based on Sc0.2AI0.8N Thin Films.

This paper presents a novel piezoelectric micromachined ultrasonic transducer (PMUT) with theoretical simulation, fabrication, and testing. Conventional methods using a PCB or an external horn to adjust the PMUT acoustic field angle are limited by the need for transducer size. To address this limitation, the stepped-tube (expanded tube) backside cavity PMUT has been proposed. The stepped-tube PMUT and the tube PMUT devices have the same membrane structure, and the acoustic impedance matching of the PMUT is optimized by modifying the boundary conditions of the back cavity structure. The acoustic comparison experiments show that the average output sound pressure of the stepped-tube backside cavity PMUT has increased by 17%, the half-power-beam-width (θ-3db) has been reduced from 55° to 30° with a reduction of 45%, and the side lobe level signal is reduced from 147 mV to 66 mV. In addition, this work is fabricated on an eight-inch wafer. The process is compatible with standard complementary metal oxide semiconductor (CMOS), conditions are stable, and the cost is controllable, plus it facilitates the batch process. These conclusions suggest that the stepped-tube backside cavity PMUT will bring new, effective, and reliable solutions to ranging applications.

Miniature Ultrasonic Spatial Localization Module in the Lightweight Interactive.

The advancement of spatial interaction technology has greatly enriched the domain of consumer electronics. Traditional solutions based on optical technologies suffers high power consumption and significant costs, making them less ideal in lightweight implementations. In contrast, ultrasonic solutions stand out due to their lower power consumption and cost-effectiveness, capturing widespread attention and interest. This paper addresses the challenges associated with the application of ultrasound sensors in spatial localization. Traditional ultrasound systems are hindered by blind spots, large physical dimensions, and constrained measurement ranges, limiting their practical applicability. To overcome these limitations, this paper proposes a miniature ultrasonic spatial localization module employing piezoelectric micromechanical ultrasonic transducers (PMUTs). The module is comprised of three devices each with dimension of 1.2 mm × 1.2 mm × 0.5 mm, operating at a frequency of around 180 kHz. This configuration facilitates a comprehensive distance detection range of 0-800 mm within 80° directivity, devoid of blind spot. The error rate and failure range of measurement as well as their relationship with the SNR (signal-to-noise ratio) are also thoroughly investigated. This work heralds a significant enhancement in hand spatial localization capabilities, propelling advancements in acoustic sensor applications of the meta-universe.

An epoxide-based covalent sensor to detect cardiac proteome aggregation in a cardio-oncology model.

Covalent sensors to detect and capture aggregated proteome in stressed cells are rare. Herein, we construct a series of covalent fluorogenic sensors for aggregated proteins by structurally modulating GFP chromophore and arming it with an epoxide warhead. Among them, P2 probe selectively modifies aggregated proteins over folded ones and turns on fluorescence as evidenced by biochemical and mass spectrometry results. The coverage of this epoxide-based covalent chemistry is demonstrated using different types of aggregated proteins. Finally, the covalent fluorescent sensor P2 allows for direct visualization and capture of aggregated proteome in stressed cardiomyocytes and cardiac tissue samples from a cardio-oncology mouse model. The epoxide-based covalent sensor developed herein may become useful for future chemical proteomics analysis of aggregated proteins to dissect the mechanism underlying cardio-oncology.

Quantitative interrogation of protein co-aggregation using multi-color fluorogenic protein aggregation sensors.

Co-aggregation of multiple pathogenic proteins is common in neurodegenerative diseases but deconvolution of such biochemical process is challenging. Herein, we developed a dual-color fluorogenic thermal shift assay to simultaneously report on the aggregation of two different proteins and quantitatively study their thermodynamic stability during co-aggregation. Expansion of spectral coverage was first achieved by developing multi-color fluorogenic protein aggregation sensors. Orthogonal detection was enabled by conjugating sensors of minimal fluorescence crosstalk to two different proteins via sortase-tag technology. Using this assay, we quantified shifts in melting temperatures in a heterozygous model protein system, revealing that the thermodynamic stability of wild-type proteins was significantly compromised by the mutant ones but not vice versa. We also examined how small molecule ligands selectively and differentially interfere with such interplay. Finally, we demonstrated these sensors are suited to visualize how different proteins exert influence on each other upon their co-aggregation in live cells.

Derivatizing merocyanine dyes to balance their polarity and viscosity sensitivities for protein aggregation detection.

Protein misfolding and aggregation processes involve local polarity and viscosity fluctuation. Herein we modulated the polarity and viscosity sensitivities of merocyanine dyes to detect protein aggregation. We demonstrated how structural modulation balanced these two fluorescence sensitivities and affected the detection of misfolded and aggregated proteins.