Revealing Intramolecular Isotope Effects with Chemical-Bond Precision.

Isotope substitution of a molecule not only changes its vibrational frequencies but also changes its vibrational distributions in real-space. Quantitatively measuring the isotope effects inside a polyatomic molecule requires both energy and spatial resolutions at the single-bond level, which has been a long-lasting challenge in macroscopic techniques. By achieving ångström resolution in tip-enhanced Raman spectroscopy (TERS), we record the corresponding local vibrational modes of pentacene and its fully deuterated form, enabling us to identify and measure the isotope effect of each vibrational mode. The measured frequency ratio νH/νD varies from 1.02 to 1.33 in different vibrational modes, indicating different isotopic contributions of H/D atoms, which can be distinguished from TERS maps in real-space and well described by the potential energy distribution simulations. Our study demonstrates that TERS can serve as a non-destructive and highly sensitive methodology for isotope detection and recognition with chemical-bond precision.

Dynamic Metal-Ligand Coordination Boosts CO2 Electroreduction.

The interfacial structure of heterogeneous catalysts determines the reaction rate by adjusting the adsorption behavior of reaction intermediates. Unfortunately, the catalytic performance of conventionally static active sites has always been limited by the adsorbate linear scaling relationship. Herein, we develop a triazole-modified Ag crystal (Ag crystal-triazole) with dynamic and reversible interfacial structures to break such a relationship for boosting the catalytic activity of CO2 electroreduction into CO. On the basis of surface science measurements and theoretical calculations, we demonstrated the dynamic transformation between adsorbed triazole and adsorbed triazolyl on the Ag(111) facet induced by metal-ligand conjugation. During CO2 electroreduction, Ag crystal-triazole with the dynamically reversible transformation of ligands exhibited a faradic efficiency for CO of 98% with a partial current density for CO as high as -802.5 mA cm-2. The dynamic metal-ligand coordination not only reduced the activation barriers of CO2 protonation but also switched the rate-determining step from CO2 protonation to the breakage of C-OH in the adsorbed COOH intermediate. This work provided an atomic-level insight into the interfacial engineering of the heterogeneous catalysts toward highly efficient CO2 electroreduction.

Self-Limited Embedding Alternating 585-Ringed Divacancies and Metal Atoms into Graphene Nanoribbons.

Because of their theoretically predicted intriguing properties, it is interesting to embed periodic 585-ringed divacancies into graphene nanoribbons (GNRs), but it remains a great challenge. Here, we develop an on-surface cascade reaction from periodic hydrogenated divacancies to alternating 585-ringed divacancies and Ag atoms via intramolecular cyclodehydrogenation in a seven-carbon-wide armchair GNR on the Ag(111) surface. Combining scanning tunneling microscopy/spectroscopy and noncontact atomic force microscopy combined with first-principles calculations, we in-situ-monitor the evolution of the distinct structural and electronic properties in the reaction intermediates. The observation of embedded Ag atoms and further nudged elastic band calculations provide unambiguous evidence for Ag adatom-mediated C-H activation in the intramolecular cyclodehydrogenation pathway, where the strain-induced self-limiting effect contributes to the formation of the GNR superlattice with alternating 585-ringed divacancies and Ag atoms, which shows a band gap of about 1.4 eV. Our findings open an avenue to introducing periodic impurities of single metal atoms and nonhexagonal rings in on-surface synthesis, which may provide a novel route for multifunctional graphene nanostructures.

Remote-Triggered Domino-like Cyclodehydrogenation in Second-Layer Topological Graphene Nanoribbons.

Cyclodehydrogenation reactions in the on-surface synthesis of graphene nanoribbons (GNRs) usually involve a series of Csp2-Csp2 and/or Csp2-Csp3 couplings and just happen on uncovered metal or metal oxide surfaces. It is still a big challenge to extend the growth of second-layer GNRs in the absence of necessary catalytic sites. Here, we demonstrate the direct growth of topologically nontrivial GNRs via multistep Csp2-Csp2 and Csp2-Csp3 couplings in the second layer by annealing designed bowtie-shaped precursor molecules over one monolayer on the Au(111) surface. After annealing at 700 K, most of the polymerized chains that appear in the second layer covalently link to the first-layer GNRs that have partially undergone graphitization. Following annealing at 780 K, the second-layer GNRs are formed and linked to the first-layer GNRs. Benefiting from the minimized local steric hindrance of the precursors, we suggest that the second-layer GNRs undergo domino-like cyclodehydrogenation reactions that are remotely triggered at the link. We confirm the quasi-freestanding behaviors in the second-layer GNRs by measuring the quasiparticle energy gap of topological bands and the tunable Kondo resonance from topological end spins using scanning tunneling microscopy/spectroscopy combined with first-principles calculations. Our findings pave the avenue to diverse multilayer graphene nanostructures with designer quantum spins and topological states for quantum information science.

Step-Assisted On-Surface Synthesis of Graphene Nanoribbons Embedded with Periodic Divacancies.

The bottom-up approach through on-surface synthesis of porous graphene nanoribbons (GNRs) presents a controllable manner for implanting periodic nanostructures to tune the electronic properties of GNRs in addition to bandgap engineering by width and edge configurations. However, owing to the existing steric hindrance in small pores like divacancies, it is still difficult to embed periodic divacancies with a nonplanar configuration into GNRs. Here, we demonstrate the on-surface synthesis of atomically precise eight-carbon-wide armchair GNRs embedded with periodic divacancies (DV8-aGNRs) by utilizing the monatomic step edges on the Au(111) surface. From a single molecular precursor correspondingly following a trans- and cis-coupling, the DV8-aGNR and another porous nanographene are respectively formed at step edges and on terraces at 720 and 570 K. Combining scanning tunneling microscopy/spectroscopy, atomic force microscopy, and first-principles calculations, we determine the out-of-plane conformation, wide bandgap (∼3.36 eV), and wiggly shaped frontier orbitals of the DV8-aGNR. Nudged elastic band calculations further quantitatively reveal that the additional steric hindrance effect in the cyclodehydrogenative reactions has a higher barrier of 1.3 eV than that in the planar porous nanographene, which also unveils the important role played by the monatomic Au step and adatoms in reducing the energy barriers and enhancing the thermodynamic preference of the oxidative cyclodehydrogenation. Our results provide the first case of GNRs containing periodic pores as small as divacancies with a nonplanar configuration and demonstrate the strategy by utilizing the chemical heterogeneity of a substrate to promote the formation of novel carbon nanomaterials.

Landau Quantization of a Narrow Doubly-Folded Wrinkle in Monolayer Graphene.

Folding can be an effective way to tailor the electronic properties of graphene and has attracted wide study interest in finding its novel properties. Here we present the experimental characterizations of the structural and electronic properties of a narrow graphene wrinkle on a SiO2/Si substrate using scanning tunneling microscopy/spectroscopy. Pronounced and nearly equally separated conductance peaks are observed in the d I/d V spectra of the wrinkle. We attribute these peaks to pseudo-Landau levels (PLLs) that are caused by a gradient-strain-induced pseudomagnetic field up to about 42 T in the narrow wrinkle. The introduction of the gradient strain and thus the pseudomagnetic field can be ascribed to the lattice deformation. A doubly-folded structure of the wrinkle is suggested. Our density functional theory calculations show that the band structure of the doubly folded graphene wrinkle has a parabolic dispersion, which can well explain the equally separated PLLs. The effective mass of carriers is obtained to be about 0.02 me ( me: the rest mass of electron), and interestingly, it is revealed that there exists valley polarization in the wrinkle. Such properties of the strained doubly folded wrinkle may provide a platform to explore some exciting phenomena in graphene, like zero-field quantum valley Hall effect.

Tuning the Doping Types in Graphene Sheets by N Monoelement.

The doping types of graphene sheets are generally tuned by different dopants with either three or five valence electrons. As a five-valence-electrons element, however, nitrogen dopants in graphene sheets have several substitutional geometries. So far, their distinct effects on electronic properties predicted by theoretical calculations have not been well identified. Here, we demonstrate that the doping types of graphene can be tuned by N monoelement under proper growth conditions using chemical vapor deposition (CVD), characterized by combining scanning tunneling microscopy/spectroscopy, X-ray/ultraviolet photoelectron spectroscopy, Hall effect measurement, Raman spectroscopy, and density functional theory calculations. We find that a relatively low partial pressure of CH4 (mixing with NH3) can lead to the growth of dominant pyridinic N substitutions in graphene, in contrast with the growth of dominant graphitic N substitutions under a higher partial pressure of CH4. Our results unambiguously confirm that the pyridinic N leads to the p-type doping, and the graphitic N leads to the n-type doping. Interestingly, we also find that the pyridinic N and the graphitic N are preferentially separated in different domains. Our findings shed light on continuously tuning the doping level of graphene monolayers by using N monoelement, which can be very convenient for growth of functional structures in graphene sheets.

Seamless Staircase Electrical Contact to Semiconducting Graphene Nanoribbons.

Electrical contact to low-dimensional (low-D) materials is a key to their electronic applications. Traditional metal contacts to low-D semiconductors typically create gap states that can pin the Fermi level (EF). However, low-D metals possessing a limited density of states at EF can enable gate-tunable work functions and contact barriers. Moreover, a seamless contact with native bonds at the interface, without localized interfacial states, can serve as an optimal electrode. To realize such a seamless contact, one needs to develop atomically precise heterojunctions from the atom up. Here, we demonstrate an all-carbon staircase contact to ultranarrow armchair graphene nanoribbons (aGNRs). The coherent heterostructures of width-variable aGNRs, consisting of 7, 14, 21, and up to 56 carbon atoms across the width, are synthesized by a surface-assisted self-assembly process with a single molecular precursor. The aGNRs exhibit characteristic vibrational modes in Raman spectroscopy. A combined scanning tunneling microscopy and density functional theory study reveals the native covalent-bond nature and quasi-metallic contact characteristics of the interfaces. Our electronic measurements of such seamless GNR staircase constitute a promising first step toward making low resistance contacts.

Differentiation of Surface and Bulk Conductivities in Topological Insulators via Four-Probe Spectroscopy.

We show a new method to differentiate conductivities from the surface states and the coexisting bulk states in topological insulators using a four-probe transport spectroscopy in a multiprobe scanning tunneling microscopy system. We derive a scaling relation of measured resistance with respect to varying interprobe spacing for two interconnected conduction channels to allow quantitative determination of conductivities from both channels. Using this method, we demonstrate the separation of 2D and 3D conduction in topological insulators by comparing the conductance scaling of Bi2Se3, Bi2Te2Se, and Sb-doped Bi2Se3 against a pure 2D conductance of graphene on SiC substrate. We also quantitatively show the effect of surface doping carriers on the 2D conductance enhancement in topological insulators. The method offers a means to understanding not just the topological insulators but also the 2D to 3D crossover of conductance in other complex systems.

Evidence of van Hove singularities in ordered grain boundaries of graphene.

It has long been under debate whether the electron transport performance of graphene could be enhanced by the possible occurrence of van Hove singularities in grain boundaries. Here, we provide direct experimental evidence to confirm the existence of van Hove singularity states close to the Fermi energy in certain ordered grain boundaries using scanning tunneling microscopy. The intrinsic atomic and electronic structures of two ordered grain boundaries, one with alternative pentagon and heptagon rings and the other with alternative pentagon pair and octagon rings, are determined. It is firmly verified that the carrier concentration and, thus, the conductance around ordered grain boundaries can be significantly enhanced by the van Hove singularity states. This finding strongly suggests that a graphene nanoribbon with a properly embedded ordered grain boundary can be a promising structure to improve the performance of graphene-based electronic devices.

Artificial kagome lattices of Shockley surface states patterned by halogen hydrogen-bonded organic frameworks.

Artificial electronic kagome lattices may emerge from electronic potential landscapes using customized structures with exotic supersymmetries, benefiting from the confinement of Shockley surface-state electrons on coinage metals, which offers a flexible approach to realizing intriguing quantum phases of matter that are highly desired but scarce in available kagome materials. Here, we devise a general strategy to construct varieties of electronic kagome lattices by utilizing the on-surface synthesis of halogen hydrogen-bonded organic frameworks (XHOFs). As a proof of concept, we demonstrate three XHOFs on Ag(111) and Au(111) surfaces, which correspondingly deliver regular, breathing, and chiral breathing diatomic-kagome lattices with patterned potential landscapes, showing evident topological edge states at the interfaces. The combination of scanning tunnelling microscopy and noncontact atomic force microscopy, complemented by density functional theory and tight-binding calculations, directly substantiates our method as a reliable and effective way to achieve electronic kagome lattices for engineering quantum states.

On-Surface Synthesis of Graphene Nanoribbons with Atomically Precise Structural Heterogeneities and On-Site Characterizations.

Graphene nanoribbons (GNRs) are strips of graphene, with widths of a few nanometers, that are promising candidates for future applications in nanodevices and quantum information processing due to their highly tunable structure-dependent electronic, spintronic, topological, and optical properties. Implantation of periodic structural heterogeneities, such as heteroatoms, nanopores, and non-hexagonal rings, has become a powerful manner for tailoring the designer properties of GNRs. The bottom-up synthesis approach, by combining on-surface chemical reactions based on rationally designed molecular precursors and in situ tip-based microscopic and spectroscopic techniques, promotes the construction of atomically precise GNRs with periodic structural modulations. However, there are still obstacles and challenges lying on the way toward the understanding of the intrinsic structure-property relations, such as the strong screening and Fermi level pinning effect of the normally used transition metal substrates and the lack of collective tip-based techniques that can cover multi-internal degrees of freedom of the GNRs. In this Perspective, we briefly review the recent progress in the on-surface synthesis of GNRs with diverse structural heterogeneities and highlight the structure-property relations as characterized by the noncontact atomic force microscopy and scanning tunneling microscopy/spectroscopy. We furthermore motivate to deliver the need for developing strategies to achieve quasi-freestanding GNRs and for exploiting multifunctional tip-based techniques to collectively probe the intrinsic properties.

On-surface cyclodehydrogenation reaction pathway determined by selective molecular deuterations.

Understanding the reaction mechanisms of dehydrogenative Caryl-Caryl coupling is the key to directed formation of π-extended polycyclic aromatic hydrocarbons. Here we utilize isotopic labeling to identify the exact pathway of cyclodehydrogenation reaction in the on-surface synthesis of model atomically precise graphene nanoribbons (GNRs). Using selectively deuterated molecular precursors, we grow seven-atom-wide armchair GNRs on a Au(111) surface that display a specific hydrogen/deuterium (H/D) pattern with characteristic Raman modes. A distinct hydrogen shift across the fjord of Caryl-Caryl coupling is revealed by monitoring the ratios of gas-phase by-products of H2, HD, and D2 with in situ mass spectrometry. The identified reaction pathway consists of a conrotatory electrocyclization and a distinct [1,9]-sigmatropic D shift followed by H/D eliminations, which is further substantiated by nudged elastic band simulations. Our results not only clarify the cyclodehydrogenation process in GNR synthesis but also present a rational strategy for designing on-surface reactions towards nanographene structures with precise hydrogen/deuterium isotope labeling patterns.

Reversible Superconductor-Insulator Transition in (Li, Fe)OHFeSe Flakes Visualized by Gate-Tunable Scanning Tunneling Spectroscopy.

Electric field control of charge carrier density provides a key in situ technology to continuously tune the ground states and map out the phase diagram of correlated electron systems in one device. This technique is highly expected to be combined with the modern state-of-the art spectroscopic probes, such as angle-resolved photoemission spectroscopy and scanning tunneling microscopy/spectroscopy (STM/S), to efficiently address these states and the underlying physics. However, it is extremely difficult and not successful so far, mainly because the fabrication process of such devices makes them prohibitive for surface probes. Here, by using a solid Li-ion conductor (SIC) as gate dielectric, we have successfully developed gate-tunable STM/S and visualized the superconductor-insulator transition (SIT) in a thin flake of single crystal (Li, Fe)OHFeSe at the nanoscale. The gate-controlled Li-ion injection first enhances the superconductivity and then drives the flake into an inhomogeneous insulating state, where superconductivity is totally suppressed. This process can be reversed by applying an opposite gate voltage. Importantly, the atomically resolved images allow us to identify the critical role that the injected Li ions play in the tuning process. Our results not only provide clear evidence of the microscopic mechanism of the tunable superconductivity and SIT in the SIC-based (Li, Fe)OHFeSe devices, but also establish SIC-gating STM as a powerful tool for investigating the complicated phase diagram of correlated electron system spectroscopically in a single sample with the field-effect approach.

Engineering Edge States of Graphene Nanoribbons for Narrow-Band Photoluminescence.

Solid-state narrow-band light emitters are on-demand for quantum optoelectronics. Current approaches based on defect engineering in low-dimensional materials usually introduce a broad range of emission centers. Here, we report narrow-band light emission from covalent heterostructures fused to the edges of graphene nanoribbons (GNRs) by controllable on-surface reactions from molecular precursors. Two types of heterojunction (HJ) states are realized by sequentially synthesizing GNRs and graphene nanodots (GNDs) and then coupling them together. HJs between armchair GNDs and armchair edges of the GNR are coherent and give rise to narrow-band photoluminescence. In contrast, HJs between the armchair GNDs and the zigzag ends of GNRs are defective and give rise to nonradiative states near the Fermi level. At low temperatures, sharp photoluminescence emissions with peak energy range from 2.03 to 2.08 eV and line widths of 2-5 meV are observed. The radiative HJ states are uniform, and the optical transition energy is controlled by the band gaps of GNRs and GNDs. As these HJs can be synthesized in a large quantity with atomic precision, this finding highlights a route to programmable and deterministic creation of quantum light emitters.

Step edge-mediated assembly of periodic arrays of long graphene nanoribbons on Au(111).

The influence of substrate steps on the bottom-up synthesis of atomically precise graphene nanoribbons (GNRs) on an Au(111) surface is investigated. Straight surface steps are found to promote the assembly of long and compact arrays of polymers with enhanced interchain π-π stacking interactions, which create a steric hindrance effect on cyclodehydrogenation to suppress the H passivation of polymer ends. The modified two-stage growth process results in periodic arrays of GNRs with doubled average length near step edges.

Controllable conversion of quasi-freestanding polymer chains to graphene nanoribbons.

In the bottom-up synthesis of graphene nanoribbons (GNRs) from self-assembled linear polymer intermediates, surface-assisted cyclodehydrogenations usually take place on catalytic metal surfaces. Here we demonstrate the formation of GNRs from quasi-freestanding polymers assisted by hole injections from a scanning tunnelling microscope (STM) tip. While catalytic cyclodehydrogenations typically occur in a domino-like conversion process during the thermal annealing, the hole-injection-assisted reactions happen at selective molecular sites controlled by the STM tip. The charge injections lower the cyclodehydrogenation barrier in the catalyst-free formation of graphitic lattices, and the orbital symmetry conservation rules favour hole rather than electron injections for the GNR formation. The created polymer-GNR intraribbon heterostructures have a type-I energy level alignment and strongly localized interfacial states. This finding points to a new route towards controllable synthesis of freestanding graphitic layers, facilitating the design of on-surface reactions for GNR-based structures.

Structural and electronic properties of an ordered grain boundary formed by separated (1,0) dislocations in graphene.

We present an investigation of the structural and electronic properties of an ordered grain boundary (GB) formed by separated pentagon-heptagon pairs in single-layer graphene/SiO2 using scanning tunneling microscopy/spectroscopy (STM/STS), coupled with density functional theory (DFT) calculations. It is observed that the pentagon-heptagon pairs, i.e., (1,0) dislocations, form a periodic quasi-one-dimensional chain. The (1,0) dislocations are separated by 8 transverse rows of carbon rings, with a period of ∼2.1 nm. The protruded feature of each dislocation shown in the STM images reflects its out-of-plane buckling structure, which is supported by the DFT simulations. The STS spectra recorded along the small-angle GB show obvious differential-conductance peaks, the positions of which qualitatively accord with the van Hove singularities from the DFT calculations.