RESUMEN
Dynamic 3D covalent organic frameworks (COFs) have shown concerted structural transformation and adaptive gas adsorption due to the conformational diversity of organic linkers. However, the isolation and observation of COF rotamers constitute undergoing challenges due to their comparable free energy and subtle rotational energy barrier. Here, we report the atomic-level observation and structural evolution of COF rotamers by cryo-3D electron diffraction and synchrotron powder X-ray diffraction. Specifically, we optimize the crystallinity and morphology of COF-320 to manifest its coherent dynamic responses upon adaptive inclusion of guest molecules. We observe a significant crystal expansion of 29 vol% upon hydration and a giant swelling with volume change up to 78 vol% upon solvation. We record the structural evolution from a non-porous contracted phase to two narrow-pore intermediate phases and the fully opened expanded phase using n-butane as a stabilizing probe at ambient conditions. We uncover the rotational freedom of biphenylene giving rise to significant conformational changes on the diimine motifs from synclinal to syn-periplanar and anticlinal rotamers. We illustrate the 10-fold increment of pore volumes and 100% enhancement of methane uptake capacity of COF-320 at 100 bar and 298 K. The present findings shed light on the design of smarter organic porous materials to maximize host-guest interaction and boost gas uptake capacity through progressive structural transformation.
RESUMEN
Metal-organic frameworks (MOFs)1-3 are known for their specific interactions with gas molecules4,5; this, combined with their rich and ordered porosity, makes them promising candidates for the photocatalytic conversion of gas molecules to useful products6. However, attempts to use MOFs or MOF-based composites for CO2 photoreduction6-13 usually result in far lower CO2 conversion efficiency than that obtained from state-of-the-art solid-state or molecular catalysts14-18, even when facilitated by sacrificial reagents. Here we create 'molecular compartments' inside MOF crystals by growing TiO2 inside different pores of a chromium terephthalate-based MOF (MIL-101) and its derivatives. This allows for synergy between the light-absorbing/electron-generating TiO2 units and the catalytic metal clusters in the backbones of MOFs, and therefore facilitates photocatalytic CO2 reduction, concurrent with production of O2. An apparent quantum efficiency for CO2 photoreduction of 11.3 per cent at a wavelength of 350 nanometres is observed in a composite that consists of 42 per cent TiO2 in a MIL-101 derivative, namely, 42%-TiO2-in-MIL-101-Cr-NO2. TiO2 units in one type of compartment in this composite are estimated to be 44 times more active than those in the other type, underlining the role of precise positioning of TiO2 in this system.
RESUMEN
Two-dimensional conductive metal-organic frameworks (2D c-MOFs), which feature high electrical conductivity and large charge carrier mobility, hold great promise in electronics and optoelectronics. Nevertheless, the limited solubility of commonly used planar ligands inevitably brings challenges in synthesis and purification and causes laborious coordination conditions for screening. Moreover, most reported 2D c-MOFs are polycrystalline powders with relatively low crystallinity and irregular morphology, hindering the unveiling of the detailed structure-function relationship. Herein, we developed a "rotor-stator" molecular design strategy to construct 2D c-MOFs using a delicately designed nonplanar biscarbazole ligand (8OH-DCB). Benefiting from the special "rotor-stator" structure of the ligand, crystals of Cu-DCB-MOF were successfully prepared, allowing for the precise determination of their crystal structure. Interestingly, the crystals of Cu-DCB-MOF can be obtained in various organic solvents, indicating excellent solvent compatibility. The versatility of the "rotor-stator" molecular design strategy was further demonstrated by another two new ligands with a "rotor-stator" structure, and afford corresponding 2D c-MOF crystals (Cu-DCBT-MOF and Cu-DCBBT-MOF). The current work presents a facile approach toward the rational design and direct construction of highly crystalline 2D c-MOFs using nonplanar ligands.
RESUMEN
While the majority of knots are made from the metal-template approach, the use of entangled, constrained knotted loops to modulate the coordination of the metal ions remains inadequately elucidated. Here, we report on the coordination chemistry of a 140-atom-long cinquefoil knotted strand comprising five tridentate and five bidentate chelating vacancies. The knotted loop is prepared through the self-assembly of asymmetric "3 + 2" dentate ligands with copper(II) ions that favor five-coordination geometry. The formation of the copper(II) pentameric helicate is confirmed by X-ray crystallography, while the corresponding copper(II) knot is characterized by XPS and LR-/HR ESI-MS. Upon removal of the original template, the knotted ligand facilitates zinc(II) ions, which typically form four- or six-coordination geometries, resulting in the formation of an otherwise inaccessible zinc(II) metallic knot with coordinatively unsaturated metal centers. The coordination numbers and geometries of the zinc(II) cations are undoubtedly determined by X-ray crystallography. Despite the kinetically labile nature and high reversibility of the zinc(II) complex preventing the detection of 5-to-6 coordination equilibrium in solution, the effects on metal-ion coordination induced by knotting hold promise for fine-tuning the coordination of metal complexes.
RESUMEN
Propane dehydrogenation (PDH) reaction has emerged as one of the most promising propylene production routes due to its high selectivity for propylene and good economic benefits. However, the commercial PDH processes usually rely on expensive platinum-based and poisonous chromium oxide based catalysts. The exploration of cost-effective and ecofriendly PDH catalysts with excellent catalytic activity, propylene selectivity, and stability is of great significance yet remains challenging. Here, we discovered a new active center, i.e., an unsaturated tricoordinated cobalt unit (≡Si-O)CoO(O-Mo) in a molybdenum-doped silicalite-1 zeolite, which afforded an unprecedentedly high propylene formation rate of 22.6 molC3H6 gCo-1 h-1 and apparent rate coefficient of 130 molC3H6 gCo-1 h-1 bar-1 with >99% of propylene selectivity at 550 °C. Such activity is nearly one magnitude higher than that of previously reported Co-based catalysts in which cobalt atoms are commonly tetracoordinated, and even superior to that of most of Pt-based catalysts under similar operating conditions. Density functional theory calculations combined with the state-of-the-art characterizations unravel the role of the unsaturated tricoordinated Co unit in facilitating the C-H bond-breaking of propane and propylene desorption. The present work opens new opportunities for future large-scale industrial PDH production based on inexpensive non-noble metal catalysts.
RESUMEN
Unraveling the mechanism of chirality transfer across length scales is crucial to the rational development of functional materials with hierarchical chirality. The key obstacle is the lack of structural information, especially at the mesoscopic level. We report herein the structural identification of helical covalent organic frameworks (heliCOFs) with hierarchical chirality, which integrate molecular chirality, channel chirality, and morphology chirality into one crystalline entity. Specifically, benefiting from the highly ordered structure of heliCOFs, the existence of chiral channels at the mesoscopic level has been confirmed by electron crystallography, and the handedness of these chiral channels has been directly determined through the stereopair imaging technique. Accordingly, the chirality transfer in heliCOFs from microscopic to macroscopic levels could be rationalized with a layer-rotating model that has been supported by both crystal structure analysis and theoretical calculations. Observation of chiral channels in heliCOFs not only provides unprecedented data for the understanding of the chirality transfer process but also sheds new light on the rational construction of highly ordered polymeric materials with hierarchical chirality.
RESUMEN
We report the colloidal synthesis of Bi-doped Cs2AgxNa1-xInCl6 double perovskite nanoplatelets (NPLs) exhibiting a near-unity photoluminescence quantum yield (PLQY), a record emission efficiency for nanoscale lead-free metal halides. A combination of optical spectroscopies revealed that nonradiative decay processes in the NPL were suppressed, indicating a well-passivated surface. By comparison, nanocubes with the same composition and surface ligands as the NPLs had a PLQY of only 40%. According to our calculations, the type of trap states arising from the presence of surface defects depends on their specific location: defects located on the facets of nanocubes generate only shallow traps, while those at the edges result in deep traps. In NPLs, due to their extended basal facets, most of the surface defects are facet defects. This so-called facet-defect tolerant behavior of double perovskites explains the more efficient optical emission of NPLs compared to that of nanocubes.
RESUMEN
A multidimensional extra-large pore zeolite with highly hydrothermal stability, denoted as -IRT-HS, has been developed successfully, starting from Ge-rich germanosilicate precursor hydrothermally directed by a small and commercially available piperidinium-type organic structure-directing agent (OSDA). -IRT-HS, with the supermicropores, is structurally analogues to 28-membered ring -IRT topology as confirmed by various spectroscopic techniques. And it is the high-silica (Si/Ge=58) zeolite with the largest pore size as well. Notably, using acid-washed as-made Ge-rich -IRT precursor as the silicon source is crucial to restore partially collapsed structure into a stable framework by OSDA-assisted recrystallization. The calcined -IRT-HS maintains a high crystallinity, even when stored in a humid environment for extended periods or directly exposed to water. Additionally, high silica Al-containing analogue is also readily synthesized, serving as an active solid-acid catalyst in 1,3,5-triisopropylbenzene cracking reaction, yielding an impressive initial conversion up to 76.1 % much higher than conventional large-pore Beta zeolite (30.4 %). This work will pave the way for the designed synthesis of targeted high-silica zeolites with stable and extra-large pore frameworks, mimicking the structures of existing Ge-rich counterparts.
RESUMEN
Three-dimensional covalent organic frameworks (3D COFs) have been of great interest due to their inherent numerous open sites and pore confinement effect. However, it has remained challenging to build 3D frameworks via interdigitation (also known as inclined interpenetration) by generating an entangled network formed by multiple 2D layers inclined with respect to each other. Herein, we report the first case of constructing a 3D COF, termed COF-904, through interdigitating 2D hcb nets, which was formed via [3+2] imine condensation reactions by the use of 1,3,5-triformylbenzene and 2,3,5,6-tetramethyl-1,4-phenylenediamine. The single-crystal structure of COF-904 is solved, and the locations of all non-hydrogen atoms are determined by 3D electron diffraction with a resolution up to 0.8 Å. These results not only broaden the strategy for achieving 3D COFs via interdigitation but also demonstrate that structurally complex extended frameworks can arise from simple molecules.
RESUMEN
Zeolites are among the most important heterogeneous catalysts, widely employed in separation reaction, fine chemical production, and petroleum refining. Through rational design of the frameworks, zeolites with versatile functions can be synthesized. Local imaging of zeolite structures at the atomic scale, including the basic framework atoms (Si, Al, and O) and extra-framework cations, is necessary to understand the structure-function relationship of zeolites. Herein, we implemented electron ptychography into direct imaging of local structures of two zeolites, Na-LTA and ZSM-5. Not only all the framework atoms but also extra-framework Na+ cations with only 1/4 occupation probabilities in Na-LTA were directly observed. Local structures of ZSM-5 zeolites having guest molecules among channels with different orientations were also unraveled using different reconstruction algorithms. The approach presented here provides a new way to locally image zeolites structure, and it is expected to be an essential key for further studying and tuning zeolites active sites at the atomic level.
RESUMEN
Ammonia borane (AB) has been regarded as a promising material for chemical hydrogen storage. However, the development of efficient, cost-effective, and stable catalysts for H2 generation from AB hydrolysis remains a bottleneck for realizing its practical application. Herein, a step-by-step reduction strategy has been developed to synthesize a series of bimetallic species with small sizes and high dispersions onto various metal oxide supports. Superior to other non-noble metal species, the introduction of Co species can remarkably and universally promote the catalytic activity of various noble metals (e.g., Pt, Rh, Ru, and Pd) in AB hydrolysis reactions. The optimized Pt0.1%Co3%/TiO2 catalyst exhibits a superhigh H2 generation rate from AB hydrolysis, showing a turnover frequency (TOF) value of 2250 molH2 molPt-1 min-1 at 298 K. Such a TOF value is about 10 and 15 times higher than that of the monometal Pt/TiO2 and commercial Pt/C catalysts, respectively. The density functional theory (DFT) calculation reveals that the synergy between Pt and CoO species can remarkably promote the chemisorption and dissociation of water molecules, accelerating the H2 evolution from AB hydrolysis. Significantly, the representative Pt0.25%Co3%/TiO2 catalyst exhibits excellent stability, achieving a record-high turnover number of up to 215,236 at room temperature. The excellent catalytic performance, superior stability, and low cost of the designed catalysts create new prospects for their practical application in chemical hydrogen storage.
RESUMEN
Zeolite molecular sieves with at least eight-membered rings are widely applied in industrial applications, while zeolite crystals with six-membered rings are normally regarded as useless products due to the occupancy of the organic templates and/or inorganic cation in the micropores that could not be removed. Herein, we showed that a novel six-membered ring molecular sieve (ZJM-9) with fully open micropores could be achieved by a reconstruction route. The mixed gas breakthrough experiments such as CH3OH/H2O, CH4/H2O, CO2/H2O, and CO/H2O at 25 °C showed that this molecular sieve was efficient for selective dehydration. Particularly, a lower desorption temperature (95 °C) of ZJM-9 than that (250 °C) of the commercial 3A molecular sieve might offer an opportunity for saving more energy in dehydration processes.
RESUMEN
Germanosilicate zeolites with various structures have been extensively synthesized, but the syntheses of corresponding zeolite structures in the absence of germanium species remain a challenge. One such example is an ITR zeolite structure, which is a twin of the ITH zeolite structure. Through the modification of a classic organic template for synthesizing ITH zeolites and thus designing a new organic template with high compatibility to ITR zeolite assisted by theoretical simulation, we, for the first time, show the Ge-free synthesis of an ITR structure including pure silica, aluminosilicate, and borosilicate ITR zeolites. These materials have high crystallinity, corresponding to an ITR content of more than 95%. In the methanol-to-propylene (MTP) reaction, the obtained aluminosilicate ITR zeolite exhibits excellent propylene selectivity and a long lifetime compared with conventional aluminosilicate ZSM-5 zeolite. The strategy for the design of organic templates might offer a new opportunity for rational syntheses of novel zeolites and, thus, the development of highly efficient zeolite catalysts in the future.
RESUMEN
Despite substantial progress in porous materials over past years, controllable preparation of conductive polymers (CPs) with continuous large pores is challenging, which are important for diverse applications, including energy storage, electrocatalysis, and biological separations. Here, we develop an unprecedented ordered bicontinuous mesoporous PPy cubosomes (mPPy-cs) using a soft-template strategy, resulting in ultralarge pores of â¼45 nm and high specific surface area of 69.5 m2 g-1. Along with their unique characteristics of adjustable surface charges and sensitivity to pH, mPPy-cs exhibited a near quantitative adsorption of albumin within 30 min, enabling efficient separation from immunoglobulin G, a typical inclusion in commercial albumin products. Moreover, the absorbed albumin could be further released in a controlled manner by lowering the pH. This work provides a feasible strategy for bottom-up construction of CPs with tailored pore sizes and nanoarchitectures, expected to attract significant attention to their properties and applications.
Asunto(s)
Polímeros , Pirroles , Albúminas , Polímeros/química , Pirroles/química , Propiedades de SuperficieRESUMEN
Membrane separation is an energy-efficient and environmentally friendly process. Two-dimensional (2D) molecular sieving membranes featuring unique nanopores and low transport resistance have the potential to achieve highly permeable and selective mixture separation with low energy consumption. High-aspect-ratio zeolite nanosheets with intrinsic molecular-sieving pores perpendicular to the layers are desirable building blocks for fabricating high-performance 2D zeolite membrane. However, a wider application of 2D zeolitic membranes is restricted by the limited number of recognized zeolite nanosheets. Herein, we report a swollen layered zeolite, ECNU-28, with SZR topology and eight-member ring (8-MR, 3.0â Å×4.8â Å) pores normal to the nanosheets. It can be easily exfoliated to construct 2D membrane, which shows a high hydrogen selectivity up to 130 from natural gas and is promising for hydrogen purification and greenhouse gas capture.
Asunto(s)
Nanoporos , Zeolitas , Cromatografía Liquida , HidrógenoRESUMEN
Non-oxidative dehydrogenation of propane is a highly efficient approach for industrial preparation of propene that is commonly catalyzed by noble Pt or toxic Cr catalysts and suffers from coking. In this work, ferric catalyst confined in a zeolite framework was synthesized by a hydrothermal procedure. The isolated Fe in the framework formed distorted tetrahedra, which were beneficial for the selective dehydrogenation of propane and reached over 95 % propene selectivity and over 99 % total olefins selectivity. This catalyst had a silanol-free structure and was oxygen tolerant, hydrothermally stable, and coke free, with a deactivation constant of 0.01â h-1 . This study provided guidance for the synthesis of structural heteroatomic zeolite and efficient propane non-oxidative dehydrogenation over early transition metals.
RESUMEN
Selective conversion of syngas to value-added olefins has attracted considerable research interest. Regulating product distribution remains challenging, such as achieving higher olefin selectivity, propylene/ethylene (P/E) and olefin/paraffin (O/P) ratios. A new pentasil zeolite Al-IDM-1 with recently approved -ION structure, composed of 17-membered-ring (MR) extra-large lobed pores and intersected 10-MR medium pores, shows a C2-6 = selectivity up to 85 % and a high O/P value of 14 in the conversion of syngas when being combined with Zna Alb Ox oxide. Moreover, for the high-silica Al-IDM-1 with Si/Al ratio of 400, the selectivity of propylene and butene accounts for 88 % in C2-4 = , resulting in high P/E (>4) and butene/ethylene (B/E >3) ratios. The high C3-4 = selectivity is contributed by two main reasons, that is, the relatively weak acidity of Al-IDM-1 zeolite enhances the olefin-based cycle revealed by the probe reactions of methanol-to-propylene (MTP) and 1-hexene cracking, and the rich isolated internal SiOH groups in Al-IDM-1 promote the desorption of C3-4 = , once they are formed inside zeolite pores.
RESUMEN
Elemental phosphorus exhibits fascinating structural varieties and versatile properties. The unique nature of phosphorus bonds can lead to the formation of extremely complex structures, and detailed structural information on some phosphorus polymorphs is yet to be investigated. In this study, we investigated an unidentified crystalline phase of phosphorus, type-II red phosphorus (RP), by combining state-of-the-art structural characterization techniques. Electron diffraction tomography, atomic-resolution scanning transmission electron microscopy (STEM), powder X-ray diffraction, and Raman spectroscopy were concurrently used to elucidate the hidden structural motifs and their packing in type-II RP. Electron diffraction tomography, performed using individual crystalline nanowires, was used to identify a triclinic unit cell with volume of 5330â Å3 , which is the largest unit cell for elemental phosphorus crystals up to now and contains approximately 250 phosphorus atoms. Atomic-resolution STEM imaging, which was performed along different crystal-zone axes, confirmed that the twisted wavy tubular motif is the basic building block of type-II RP. Our study discovered and presented a new variation of building blocks in phosphorus, and it provides insights to clarify the complexities observed in phosphorus as well as other relevant systems.
RESUMEN
The uncontrolled deposition/dissolution process of lithium dendrites during electrochemical cycling in batteries limits the large-scale application of Li metal anodes. Investigating the microstructure of Li dendrites is a focal point. Currently, the only way to protect and observe sensitive Li dendrites is through low-temperature transmission electron microscopy (LT-TEM), whereas room-temperature characterization is still lacking. In this work, the room-temperature microstructure of Li dendrites was obtained by TEM using both vacuum- and inert-gas-transfer methods. Detailed comparison between LT- and room-temperature (RT-)TEM characterizations was provided to show the pros and cons of each method. Especially, RT-TEM shows the advantage of flexible incorporation with multifunctional characterizations, such as 3D tomography. By using RT-TEM, microstructural evolution of Li dendrites during the electrodeposition/dissolution process, including increase of the quantity of inorganic Li2O compounds in the solid electrolyte interphase, lateral growth behavior, and two types of inactive Li, has been revealed, enriching the understanding of the structure-property relationship of Li dendrites.
RESUMEN
Two entangled 2D square covalent organic frameworks (COFs) have been synthesized from 4,4',4â³,4â´-(9,9'-spirobi[fluorene]-2,2',7,7'-tetrayl)-tetrabenzaldehhyde (SFTB) and p-phenylenediamine (PPA) and benzidine (BZD) to form COF-38, [(SFTB)(PPA)2]imine, and its isoreticular form COF-39, [(SFTB)(BZD)2]imine. We also report the single-crystal electron diffraction structure of COF-39 and find that it is composed of mutually entangled 2D square nets (sql). These COFs represent the first examples of entangled 2D COF structures, which, as we illustrate, were made possible by our strategy of using the distorted tetrahedral SFTB building unit. SFTB overcomes the propensity of 2D COFs to stack through π-π stacking and allows entanglements to form. This work significantly adds to the design principles of COFs.