Thiolene- and Polycaprolactone Methacrylate-Based Polymerized High Internal Phase Emulsion (PolyHIPE) Scaffolds for Tissue Engineering.

Highly porous emulsion templated polymers (PolyHIPEs) provide a number of potential advantages in the fabrication of scaffolds for tissue engineering and regenerative medicine. Porosity enables cell ingrowth and nutrient diffusion within, as well as waste removal from, the scaffold. The properties offered by emulsion templating alone include the provision of high interconnected porosity, and, in combination with additive manufacturing, the opportunity to introduce controlled multiscale porosity to complex or custom structures. However, the majority of monomer systems reported for PolyHIPE preparation are unsuitable for clinical applications as they are nondegradable. Thiol-ene chemistry is a promising route to produce biodegradable photocurable PolyHIPEs for the fabrication of scaffolds using conventional or additive manufacturing methods; however, relatively little research has been reported on this approach. This study reports the groundwork to fabricate thiol- and polycaprolactone (PCL)-based PolyHIPE materials via a photoinitiated thiolene click reaction. Two different formulations, either three-arm PCL methacrylate (3PCLMA) or four-arm PCL methacrylate (4PCLMA) moieties, were used in the PolyHIPE formulation. Biocompatibility of the PolyHIPEs was investigated using human dermal fibroblasts (HDFs) and human osteosarcoma cell line (MG-63) by DNA quantification assay, and developed PolyHIPEs were shown to be capable of supporting cell attachment and viability.

A physiologically relevant, estradiol-17ß [E2]-responsive in vitro tissue-engineered model of the vaginal epithelium for vaginal tissue research.

AIMS: There are many situations where preclinical models of the human vagina would be valuable for in vitro studies into the pathophysiology of vaginally transmitted diseases, microbicide efficacy, irritability testing, and particularly, for assessing materials to be inserted in the vagina for support of the pelvic floor. The aim of this study is to develop a physiologically relevant, low cost, and ethically suitable model of the vagina using sheep vaginal tissue (SVT) to reduce the need for animal testing in gynecological research. METHODS: Tissue-engineered (TE) vaginal models were developed by culturing primary vaginal epithelial cells and vaginal fibroblasts, isolated from the native SVTs on decellularized sheep vaginal matrices at an air-liquid interface. Morphological analyses of the models were conducted by performing hematoxylin and eosin staining and further characterization was done by immunohistofluorescence (IHF) of structural proteins and cytokeratins. RESULTS: Histological analysis of the models revealed a gradual formation of a stratified epithelium on our decellularized matrices and cell metabolic activity remained high for 21 days as measured by the resazurin assay. Our models showed a dose-dependent response to estradiol-17ß [E2 ] with an increase in the vaginal epithelium thickness and cellular proliferation under higher E2 concentrations (100-400 pg/ml). The physiological relevance of these results was confirmed by the IHF analysis of Ki67, and cytokeratins 10 and 19 expression. CONCLUSION: In this study, we have developed an estradiol-responsive TE vaginal model that closely mimics the structural and physiological properties of the native SVT.

A Dinuclear Osmium(II) Complex Near-Infrared Nanoscopy Probe for Nuclear DNA.

With the aim of developing photostable near-infrared cell imaging probes, a convenient route to the synthesis of heteroleptic OsII complexes containing the Os(TAP)2 fragment is reported. This method was used to synthesize the dinuclear OsII complex, [{Os(TAP)2}2tpphz]4+ (where tpphz = tetrapyrido[3,2-a:2',3'-c:3″,2''-h:2‴,3'''-j]phenazine and TAP = 1,4,5,8- tetraazaphenanthrene). Using a combination of resonance Raman and time-resolved absorption spectroscopy, as well as computational studies, the excited state dynamics of the new complex were dissected. These studies revealed that, although the complex has several close lying excited states, its near-infrared, NIR, emission (λmax = 780 nm) is due to a low-lying Os → TAP based 3MCLT state. Cell-based studies revealed that unlike its RuII analogue, the new complex is neither cytotoxic nor photocytotoxic. However, as it is highly photostable as well as live-cell permeant and displays NIR luminescence within the biological optical window, its properties make it an ideal probe for optical microscopy, demonstrated by its use as a super-resolution NIR STED probe for nuclear DNA.

Developing Wound Dressings Using 2-deoxy-D-Ribose to Induce Angiogenesis as a Backdoor Route for Stimulating the Production of Vascular Endothelial Growth Factor.

2-deoxy-D-Ribose (2dDR) was first identified in 1930 in the structure of DNA and discovered as a degradation product of it later when the enzyme thymidine phosphorylase breaks down thymidine into thymine. In 2017, our research group explored the development of wound dressings based on the delivery of this sugar to induce angiogenesis in chronic wounds. In this review, we will survey the small volume of conflicting literature on this and related sugars, some of which are reported to be anti-angiogenic. We review the evidence of 2dDR having the ability to stimulate a range of pro-angiogenic activities in vitro and in a chick pro-angiogenic bioassay and to stimulate new blood vessel formation and wound healing in normal and diabetic rat models. The biological actions of 2dDR were found to be 80 to 100% as effective as VEGF in addition to upregulating the production of VEGF. We then demonstrated the uptake and delivery of the sugar from a range of experimental and commercial dressings. In conclusion, its pro-angiogenic properties combined with its improved stability on storage compared to VEGF, its low cost, and ease of incorporation into a range of established wound dressings make 2dDR an attractive alternative to VEGF for wound dressing development.

A Dinuclear Ruthenium(II) Complex Excited by Near-Infrared Light through Two-Photon Absorption Induces Phototoxicity Deep within Hypoxic Regions of Melanoma Cancer Spheroids.

The dinuclear photo-oxidizing RuII complex [{Ru(TAP2)}2(tpphz)]4+ (TAP = 1,4,5,8- tetraazaphenanthrene, tpphz = tetrapyrido[3,2-a:2',3'-c:3″,2''-h:2‴,3'''-j]phenazine), 14+, is readily taken up by live cells localizing in mitochondria and nuclei. In this study, the two-photon absorption cross section of 14+ is quantified and its use as a two-photon absorbing phototherapeutic is reported. It was confirmed that the complex is readily photoexcited using near-infrared, NIR, and light through two-photon absorption, TPA. In 2-D cell cultures, irradiation with NIR light at low power results in precisely focused phototoxicity effects in which human melanoma cells were killed after 5 min of light exposure. Similar experiments were then carried out in human cancer spheroids that provide a realistic tumor model for the development of therapeutics and phototherapeutics. Using the characteristic emission of the complex as a probe, its uptake into 280 µm spheroids was investigated and confirmed that the spheroid takes up the complex. Notably TPA excitation results in more intense luminescence being observed throughout the depth of the spheroids, although emission intensity still drops off toward the necrotic core. As 14+ can directly photo-oxidize DNA without the mediation of singlet oxygen or other reactive oxygen species, phototoxicity within the deeper, hypoxic layers of the spheroids was also investigated. To quantify the penetration of these phototoxic effects, 14+ was photoexcited through TPA at a power of 60 mW, which was progressively focused in 10 µm steps throughout the entire z-axis of individual spheroids. These experiments revealed that, in irradiated spheroids treated with 14+, acute and rapid photoinduced cell death was observed throughout their depth, including the hypoxic region.

Bioengineered airway epithelial grafts with mucociliary function based on collagen IV- and laminin-containing extracellular matrix scaffolds.

Current methods to replace damaged upper airway epithelium with exogenous cells are limited. Existing strategies use grafts that lack mucociliary function, leading to infection and the retention of secretions and keratin debris. Strategies that regenerate airway epithelium with mucociliary function are clearly desirable and would enable new treatments for complex airway disease.Here, we investigated the influence of the extracellular matrix (ECM) on airway epithelial cell adherence, proliferation and mucociliary function in the context of bioengineered mucosal grafts. In vitro, primary human bronchial epithelial cells (HBECs) adhered most readily to collagen IV. Biological, biomimetic and synthetic scaffolds were compared in terms of their ECM protein content and airway epithelial cell adherence.Collagen IV and laminin were preserved on the surface of decellularised dermis and epithelial cell attachment to decellularised dermis was greater than to the biomimetic or synthetic alternatives tested. Blocking epithelial integrin α2 led to decreased adherence to collagen IV and to decellularised dermis scaffolds. At air-liquid interface (ALI), bronchial epithelial cells cultured on decellularised dermis scaffolds formed a differentiated respiratory epithelium with mucociliary function. Using in vivo chick chorioallantoic membrane (CAM), rabbit airway and immunocompromised mouse models, we showed short-term preservation of the cell layer following transplantation.Our results demonstrate the feasibility of generating HBEC grafts on clinically applicable decellularised dermis scaffolds and identify matrix proteins and integrins important for this process. The long-term survivability of pre-differentiated epithelia and the relative merits of this approach against transplanting basal cells should be assessed further in pre-clinical airway transplantation models.

2-deoxy-d-ribose (2dDR) upregulates vascular endothelial growth factor (VEGF) and stimulates angiogenesis.

BACKGROUND: Delayed neovascularisation of tissue-engineered (TE) complex constructs is a major challenge that causes their failure post-implantation. Although significant progress has been made in the field of angiogenesis, ensuring rapid neovascularisation still remains a challenge. The use of pro-angiogenic agents is an effective approach to promote angiogenesis, and vascular endothelial growth factor (VEGF) has been widely studied both at the biological and molecular levels and is recognised as a key stimulator of angiogenesis. However, the exogenous use of VEGF in an uncontrolled manner has been shown to result in leaky, permeable and haemorrhagic vessels. Thus, researchers have been actively seeking alternative agents to upregulate VEGF production rather than exogenous use of VEGF in TE systems. We have previously revealed the potential of 2-deoxy-d-ribose (2dDR) as an alternative pro-angiogenic agent to induce angiogenesis and accelerates wound healing. However, to date, there is not any clear evidence on whether 2dDR influences the angiogenic cascade that involves VEGF. METHODS: In this study, we explored the angiogenic properties of 2dDR either by its direct application to human aortic endothelial cells (HAECs) or when released from commercially available alginate dressings and demonstrated that when 2dDR promotes angiogenesis, it also increases the VEGF production of HAECs. RESULTS: The VEGF quantification results suggested that VEGF production by HAECs was increased with 2dDR treatment but not with other sugars, including 2-deoxy-l-ribose (2dLR) and d-glucose (DG). The stability studies demonstrated that approximately 40-50% of the 2dDR had disappeared in the media over 14 days, either in the presence or absence of HAECs, and the reduction was higher when cells were present. The concentration of VEGF in the media also fell after day 4 associated with the reduction in 2dDR. CONCLUSION: This study suggests that 2dDR (but not other sugars tested in this study) stimulates angiogenesis by increasing the production of VEGF. We conclude 2dDR appears to be a practical and effective indirect route to upregulating VEGF for several days, leading to increased angiogenesis.

Complications related to use of mesh implants in surgical treatment of stress urinary incontinence and pelvic organ prolapse: infection or inflammation?

The surgical mesh material used in the surgical treatment of stress urinary incontinence (SUI) and pelvic organ prolapse (POP) in women is associated with significant complications in some women. This has recently become a public health issue with involvement of national parliaments and regulatory bodies. The occurrence of mesh complications is thought to be a result of multifactorial processes involving problems related to the material design, the surgical techniques used and disease, and patient-related factors. However, the infectious complications and mesh-tissue interactions are least studied. The aim of this article is to review any previous clinical and basic scientific evidence about the contribution of infectious and inflammatory processes to the occurrence of mesh-related complications in SUI and POP. A literature search for the relevant publications without any time limits was performed on the Medline database. There is evidence to show that vaginal meshes are associated with an unfavourable host response at the site of implantation. The underlying mechanisms leading to this type of host response is not completely clear. Mesh contamination with vaginal flora during surgical implantation can be a factor modifying the host response if there is a subclinical infection that can trigger a sustained inflammation. More basic science research is required to identify the biological mechanisms causing a sustained inflammation at the mesh-tissue interface that can then lead to contraction, mesh erosion, and pain.

The use of implanted materials for treating women with pelvic organ prolapse and stress urinary incontinence.

PURPOSE OF REVIEW: To review the current clinical management of stress urinary incontinence and pelvic organ prolapse following the adverse complications seen in the use of polypropylene mesh to treat both. RECENT FINDINGS: Materials developed for use in abdominal hernia repair have not proven risk-free when used to support pelvic organs particularly when inserted via the vagina. Following unacceptably high levels of severe complications when high-density polypropylene mesh is inserted via the vagina to treat pelvic organ prolapse, reported over the last decade, there is now an agreed consensus between surgeons about surgical approaches and materials, which should be recommended for use in stress urinary incontinence and pelvic organ prolapse. SUMMARY: There is a need for new biomaterials and tissue engineered/regenerative medicine approaches to treat stress urinary incontinence and pelvic organ prolapse. New materials need to be evaluated critically in both preclinical and clinical studies before being adopted into routine clinical use.

The changing regulatory landscape for biomedical implants and its relationship to withdrawal of some vaginal mesh products.

PURPOSE OF REVIEW: Advancements in biomedical engineering and advanced therapies including tissue engineering products necessitate revisions to the regulation and governance of their production and use to ensure patient safety. In this review, the current regulations and recent improvements on the governance of biomedical devices are reviewed. RECENT FINDINGS: Current regulations on approval of biomedical devices failed to address some important aspects related to the definition of biocompatibility of medical implants. The main issue was that the failure to establish design requirements for a specific application - in this case, the pelvic floor. Another issue was the lack of knowledge on disease mechanisms leading to an inability to define clear targets for surgical treatment. A clear example of this is the recent vaginal mesh scandal. SUMMARY: Surgical innovations are inherently challenging. It is no surprise that the regulatory landscape lags behind advancements in biomedical technologies. Very recent modifications to the available regulations particularly in Europe aim to establish a robust, transparent, predictable and sustainable regulatory framework for medical devices, which ensures patient safety while supporting innovation.

Improving the biocompatibility of biomaterial constructs and constructs delivering cells for the pelvic floor.

PURPOSE OF REVIEW: Interactions between biomaterials and biomaterial-delivering cells and the host tissues are complexly affected by the material itself, the ultrastructure of the overall construct and cells and other bioactive factors involved. The aim of this review is to review the current understanding on the definitions of biocompatibility and current advances in improving biocompatability of tissue-engineered constructs. RECENT FINDINGS: Some synthetic materials are associated with more foreign body reactions compared with natural materials; however, they allow fabrication of materials with a great diversity of physical and mechanical properties. Material design strategies can be tailored to mimic the natural extracellular matrix topography. There are also advancements in the pharmacological functionalization of materials with improved angiogenic potential that can lead to better tissue response. Stem cells are also used to improve the tissue response of tissue-engineered materials; however, the recent regulations on regenerative medicine products necessitate significant regulatory approval processes for these. SUMMARY: The biggest challenge faced in translation of tissue-engineered constructs into clinical practice relates to their engraftment and poor tissue integration into the challenging wound bed of the pelvic floor. Biocompatibility of tissue engineered constructs can theoretically be improved by the incorporation of bioactive agents, such as vitamins C or oestradiol.

Designing new synthetic materials for use in the pelvic floor: what is the problem with the existing polypropylene materials?

PURPOSE OF REVIEW: This review identifies the clinical complications associated with the design of the current polyproplylene mesh materials used for the treatment of stress urinary incontinence and pelvic organ prolapse. Following on from this, new alternative materials under development for pelvic floor repair are reviewed. RECENT FINDINGS: It is well accepted that the textile properties of the current polypropylene surgical meshes are not suitable for the pelvic floor environment. This together with the chemical nature of the current mesh leads to complications whenever implanted in the pelvic floor of women. New alternative materials for the repair of the pelvic floor have been developed with properties designed to be more appropriate for the biomechanical requirements and implantation requirements for the pelvic floor to reduce these clinical complications. To support this, these newer materials are being rigorously tested using more appropriate in-vitro regimes and animal models. SUMMARY: This chapter summarizes developments in the design of new materials for pelvic floor repair. These are being subjected to preclinical testing to exclude materials, which might fail to work in this dynamic environment by either showing a poor mechanical match to the requirements of the tissue or by provoking sustained inflammation. The hope is that new materials will prove effective without causing the high incidence of unacceptable side-effects currently seen with polypropylene mesh implants.

Tissue engineering for the pelvic floor.

PURPOSE OF REVIEW: To set in context the challenge of developing tissue-engineered constructs for use in the female pelvic floor compared with at least 30 years of research progress in tissue engineering for other tissues. RECENT FINDINGS: The relative lack of information on the mechanical requirements of the pelvic floor in women who have suffered damage to these tissues is a major challenge to designing tissue-engineered materials for use in this area. A few groups are now using autologous cells and biomaterials to develop constructs for repair and regeneration of the pelvic floor. Progress with these has reached early stage evaluation in small animal models. Meanwhile the regulatory challenge of introducing laboratory-expanded cell therapy into the clinic is prompting groups to look at alternatives, such as using lipoaspirate retrieved in theatre as a source of adult stem cells for a number of tissues. In our group, we have begun to look at lipoaspirate for repair of the pelvic floor. SUMMARY: There is a need for research to harvest the advances made over the last 30 years in developing tissue-engineered constructs for several tissues to now tackle the problems of the weakened pelvic floor. At present, there are relatively few groups engaged in this challenge despite the growing clinical need.

An estradiol releasing, proangiogenic hydrogel as a candidate material for use in soft tissue interposition.

INTRODUCTION AND OBJECTIVES: Soft tissue interposition (STI) using local and/or regional flaps is often necessary in urogenital reconstruction to stimulate wound healing and prevent recurrence. Harvesting STI flaps can cause donor site morbidity and may not be available in some patients. In this study, we designed estradiol (E2) releasing hydrogel that could be used as an alternative to a STI flap and to investigate its ability to stimulate tissue production and angiogenesis. MATERIALS AND METHODS: A hydrogel was constructed by crosslinking a solution of estradiol, methacrylated gelatin (15%, w/v), and methacrylated hyaluronic acid (1%, w/v). The release of estradiol was measured using a UV-spectrophotometer (λmax = 220 nm). Angiogenesis was evaluated by an ex ovo chicken embryo chorioallantoic membrane (CAM) assay. RESULTS: Estradiol was gradually released from the hydrogel over 21 days. The hydrogels could be easily manipulated with surgical forceps without any deformation. The hydrogels significantly increased collagen production of human dermal fibroblasts (HDFs). Scanning electron microscopic examination demonstrated that HDFs produced significantly more extracellular matrix (ECM) on estradiol releasing hydrogels compared with the controls. Estradiol releasing hydrogels doubled the number of blood vessels growing toward the hydrogel compared with the controls (vasculogenic index, 59.6 [±6.4] and 25.6 [±4.0], respectively; [P < 0.05]). CONCLUSION: We present a proangiogenic, degradable hydrogel that can be used as an off-the-shelf available substitute to traditional STI flaps. This is achieved by using estradiol as a potent stimulator of new tissue production and new blood vessel formation.

Use of a simple in vitro fatigue test to assess materials used in the surgical treatment of stress urinary incontinence and pelvic organ prolapse.

AIMS: Stress urinary incontinence and pelvic organ prolapse are very common conditions with a proportion of patients requiring implantation of synthetic materials for a durable repair. However increasing numbers of post-surgical complications have been reported related to the use of polypropylene meshes. One hypothesis for the adverse response is poor mechanical matching of the relatively stiff polypropylene mesh particularly as materials in the pelvic floor will need to cope with decades of distension as occurs with increase of intraabdominal pressure on coughing, laughing, or sneezing. METHODS: In this study we have undertaken a very simple fatigue testing regime to compare the mechanical abilities of six materials. Four commercial meshes in clinical use and two novel electrospun materials not yet evaluated in the clinic were assessed using a uniaxial tensile test. This was performed on six samples of each dry material and on another six samples of each material after just 3 days of fatigue conditions using a dynamic bioreactor. RESULTS: The four commercial materials showed permanent mechanical deformation after just 3 days of stretching these materials by 25% elongation on a regular dynamic cycle, whereas the two new materials presented more elastic properties without deformation. CONCLUSIONS: We suggest that a test as simple as this 3-day fatigue testing is sufficient to distinguish between materials which have already been found to cause complications clinically and newer materials yet to be tested clinically which will hopefully prove more mechanically appropriate for implantation in the pelvic floor.

Demonstration of improved tissue integration and angiogenesis with an elastic, estradiol releasing polyurethane material designed for use in pelvic floor repair.

AIMS: Pelvic organ prolapse and stress urinary incontinence affect 40-50% of postmenopausal women worldwide. Polypropylene meshes have been extensively used for the surgical intervention of these disorders; however, these meshes can lead to severe complications in some patients. The need for synthetic materials more suited for use in pelvic floor repair is widely accepted. This study aims to develop an electrospun 17-ß-estradiol releasing polyurethane (PU) scaffold that not only provides the appropriate mechanical support but can also stimulate new extracellular matrix (ECM) production and angiogenesis. METHODS: PU scaffolds with and without 17-ß-estradiol (25 and 50 mg/g) were prepared by blend electrospinning. Mechanical properties of scaffolds were assessed by uniaxial cyclic and non-cyclic testing. The viability and ECM production of human adipose derived mesenchymal stem cells (hADMSCs) cultured on 17-ß-estradiol releasing PU scaffolds was evaluated. Angiogenic potential of estradiol releasing scaffolds was demonstrated by using an ex ovo chick chorioallantoic membrane (CAM) assay. RESULTS: The inclusion of estradiol in PU scaffolds did not change the ultrastructure but it significantly increased the ultimate tensile strength of scaffolds. hADMSCs on estradiol-releasing PU scaffolds showed more ECM production. The CAM assay revealed a significantly higher angiogenic potential of estradiol-releasing PU scaffolds with an additive effect seen when hADMSCs cultured on estradiol scaffolds. Histological examination of CAM tissue sections showed extensive cellular infiltration and a good tissue integration for all constructed scaffolds. CONCLUSIONS: This study shows the angiogenic potential of estradiol-releasing PU scaffolds with appropriate strength and elasticity desirable to support the pelvic floor.

Ex vivo rabbit and human corneas as models for bacterial and fungal keratitis.

PURPOSE: In the study of microbial keratitis, in vivo animal models often require a large number of animals, and in vitro monolayer cell culture does not maintain the three-dimensional structure of the tissues or cell-to-cell communication of in vivo models. Here, we propose reproducible ex vivo models of single- and dual-infection keratitis as an alternative to in vivo and in vitro models. METHODS: Excised rabbit and human corneoscleral rims maintained in organ culture were infected using 108 cells of Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans or Fusarium solani. The infection was introduced by wounding with a scalpel and exposing corneas to the microbial suspension or by intrastromal injection. Post-inoculation, corneas were maintained for 24 and 48 h at 37 °C. After incubation, corneas were either homogenised to determine colony-forming units (CFU)/cornea or processed for histological examination using routine staining methods. Single- and mixed-species infections were compared. RESULTS: We observed a significant increase in CFU after 48 h compared to 24 h with S. aureus and P. aeruginosa. However, no such increase was observed in corneas infected with C. albicans or F. solani. The injection method yielded an approximately two- to 100-fold increase (p < 0.05) in the majority of organisms from infected corneas. Histology of the scalpel-wounded and injection models indicated extensive infiltration of P. aeruginosa throughout the entire cornea, with less infiltration observed for S. aureus, C. albicans and F. solani. The models also supported dual infections. CONCLUSIONS: Both scalpel wounding and injection methods are suitable for inducing infection of ex vivo rabbit and human cornea models. These simple and reproducible models will be useful as an alternative to in vitro and in vivo models for investigating the detection and treatment of microbial keratitis, particularly when this might be due to two infective organisms.

Evaluating Alternative Materials for the Treatment of Stress Urinary Incontinence and Pelvic Organ Prolapse: A Comparison of the In Vivo Response to Meshes Implanted in Rabbits.

PURPOSE: Serious complications can develop with the mesh implants used for stress urinary incontinence and pelvic organ prolapse surgery. We evaluated 2 materials currently in clinical use and 2 alternative materials using a rabbit abdominal model to assess host response and biomechanical properties of the materials before and after implantation. MATERIALS AND METHODS: Poly-L-lactic acid and polyurethane meshes were electrospun to be compared to commercially available polypropylene and polyvinylidene fluoride meshes. A total of 40 immunocompetent full-thickness abdominal wall defect rabbit models were used, including 8 in each of the poly-L-lactic acid, polyurethane, polyvinylidene fluoride and polypropylene experimental groups, and sham controls. Two 20 mm defects were created per animal and primarily repaired. The experimental groups then underwent onlay of each repair material while sham controls did not. Four rabbits per group were sacrificed at days 30 and 90. Abdominal wall specimens containing the defect with or without repair material were explanted to be assessed by histology (hematoxylin and eosin staining, and immunohistochemistry) and biomechanical testing at 30 and 90 days. RESULTS: At 90 days of implantation tissues repaired with all 4 materials showed biomechanical properties without significant differences. However, polypropylene and polyvinylidene fluoride meshes demonstrated a sustained chronic inflammatory response profile by 90 days. In contrast, poly-L-lactic acid and polyurethane meshes integrated well into host tissues with a decreased inflammatory response, indicative of constructive remodeling. CONCLUSIONS: Poly-L-lactic acid and polyurethane alternative materials achieved better host integration in rabbit models than current synthetic repair materials.

Second Harmonic Generation microscopy reveals collagen fibres are more organised in the cervix of postmenopausal women.

BACKGROUND: During labour, the cervix undergoes a series of changes to allow the passage of the fetoplacental unit. While this visible transformation is well-described, the underlying and causative microscopic changes, in which collagen plays a major role, are poorly understood and difficult to visualise. Recent studies in mice and humans have shown that Second Harmonic Generation (SHG) microscopy, a non-destructive imaging technique, can detect changes in the cervical collagen. However, the question of whether SHG can identify changes in the arrangement of cervical collagen at different physiological stages still needs addressing. Therefore, this study aimed to compare the cervical collagen alignment between pre- and postmenopausal women using SHG and to generate proof-of-concept data prior to assessing this technique in pregnancy. METHODS: Cervical biopsies from premenopausal (n = 4) and postmenopausal (n = 4) multiparous women undergoing hysterectomy for benign conditions were cross-sectionally scanned using an upright confocal microscope. SHG images were collected in Z-stacks and qualitatively evaluated using semi-quantitative scoring (0-3 in ascending degree of alignment) by assessors who were unaware of the classification of the SHG images, and quantitatively, using 2D Fourier transformation analysis. The dominant orientation and difference in dispersion of collagen fibres in each z-stack (X ± SD) was calculated and compared between groups. RESULTS: Qualitatively, collagen fibres appeared more organised in postmenopausal women, [premenopausal: median 0, range (0-1), postmenopausal: median 1.25, range (1-3); X 2 (df = 5) = 19.35, p = 0.002]. Quantitatively, there was a statistically significant difference in collagen fibre dispersion between premenopausal (5.39° ± 12.68°) and postmenopausal women (-1.58° ± 8.24°), [Welch's t-test (245.54) = 5.54, p < 0.01], with no significant differences in dispersion within each group [premenopausal, Welch's F (7, 57.23) = 1.84, p = 0.098; postmenopausal, Welch's F (7, 57.28) = 1.39, p = 0.23]. CONCLUSION: These results suggest an increased alignment of cervical collagen in postmenopausal women which may result in increased stiffness and reduced compliance, confirm that SHG microscopy can provide qualitative and quantitative information about cervical collagen orientation without sample preparation, and support further research to explore SHG as a means of assessing cervical remodelling to predict the timing of term and preterm labour.

Fabrication of Biodegradable Synthetic Vascular Networks and Their Use as a Model of Angiogenesis.

One of the greatest challenges currently faced in tissue engineering is the incorporation of vascular networks within tissue-engineered constructs. The aim of this study was to develop a technique for producing a perfusable, 3-dimensional, cell-friendly model of vascular structures that could be used to study the factors affecting angiogenesis and vascular biology in engineered systems in more detail. Initially, biodegradable synthetic pseudovascular networks were produced via the combination of robocasting and electrospinning techniques. The internal surfaces of the vascular channels were then recellularized with human dermal microvascular endothelial cells (HDMECs) with and without the presence of human dermal fibroblasts (HDFs) on the outer surface of the scaffold. After 7 days in culture, channels that had been reseeded with HDMECs alone demonstrated irregular cell coverage. However, when using a co-culture of HDMECs inside and HDFs outside the vascular channels, coverage was found to be continuous throughout the internal channel. Using this cell combination, collagen gels loaded with vascular endothelial growth factor were deposited onto the outer surface of the scaffold and cultured for a further 7 days. After this, endothelial cell outgrowth from within the channels into the collagen gel was observed, showing that the engineered vasculature maintains its capacity for angiogenesis. Furthermore, the HDMECs appeared to have formed perfusable tubules within the gel. These results show promising steps towards the development of an in vitro platform for studying angiogenesis and vascular biology in a tissue engineering context.