Bronchoscopic Evaluation of a Steerable Needle for Simulated Tumor Targets in the Lung Periphery: A Feasibility Study (Bullseye).

BACKGROUND: Peripheral bronchoscopy is often performed to biopsy peripheral pulmonary lesions. Despite technological advancements to improve reach and access to the lung periphery, the diagnostic yield of peripheral bronchoscopy has been inconsistent, and challenging, particularly for lesions that are adjacent to peripheral bronchi. Current biopsy instruments are reliant on the catheter or scope to align properly with targeted lesions. OBJECTIVES: This study evaluates the feasibility of using a steerable biopsy needle to gain access to peripheral tumor targets in a cadaveric model. METHODS: Simulated tumor targets 10-30 mm in axial diameter were placed into human cadavers. Bronchoscopy was performed using a 4.2 mm OD flexible bronchoscope, CT-anatomic correlation, and multi-planar fluoroscopy for lesion localization. Once at the targeted location, a steerable needle was deployed and the needle position was determined to be in the central zone, peripheral zone, or outside of the lesion by cone beam CT imaging. If the needle position was within the lesion, a fiducial marker was deployed to mark the needle position, and the needle was articulated and/or rotated in an attempt to place another fiducial marker into a different location within the same lesion. If the needle was outside of the lesion, the bronchoscopist was provided with two additional attempts to gain access to the lesion. RESULTS: Fifteen tumor targets were placed with a mean lesion size of 20.4 mm. The majority of lesions were located in the upper lobes. One fiducial marker was placed in 93.3% of lesions and a second fiducial marker was successfully placed in 80% of lesions. A fiducial marker was placed within the central zone in 60% of lesions. CONCLUSION: The steerable needle was successfully placed within 93% of targeted lesions 10-30 mm in diameter in a cadaveric model, with the ability steer the instrument into another portion of the lesion in 80% of cases. The ability to steer and control needle positioning toward and within peripheral lesions may complement existing catheter and scope technology during peripheral diagnostic procedures.

Accuracy of a Robotic Endoscopic System in Cadaver Models with Simulated Tumor Targets: ACCESS Study.

BACKGROUND: Bronchoscopy for the diagnosis of peripheral pulmonary lesions continues to present clinical challenges, despite increasing experience using newer guided techniques. Robotic bronchoscopic platforms have been developed to potentially improve diagnostic yields. Previous studies in cadaver models have demonstrated increased reach into the lung periphery using robotic systems compared to similarly sized conventional bronchoscopes, although the clinical impact of additional reach is unclear. OBJECTIVES: This study was performed to evaluate the performance of a robotic bronchoscopic system's ability to reach and access artificial tumor targets simulating peripheral nodules in human cadaveric lungs. METHODS: Artificial tumor targets sized 10-30 mm in axial diameter were implanted into 8 human cadavers. CT scans were performed prior to procedures and all cadavers were intubated and mechanically ventilated. Electromagnetic navigation, radial probe endobronchial ultrasound, and fluoroscopy were used for all procedures. Robotic-assisted bronchoscopy was performed on each cadaver by an individual bronchoscopist to localize and biopsy peripheral lesions. RESULTS: Sixty-seven nodules were evaluated in 8 cadavers. The mean nodule size was 20.4 mm. The overall diagnostic yield was 65/67 (97%) and there was no statistical difference in diagnostic yield for lesions <20 mm compared with lesions measuring 21-30 mm, the presence of a concentric or eccentric radial ultrasound image, or relative distance from the pleura. CONCLUSIONS: The robotic bronchoscopic system was successful at biopsying 97% of peripheral pulmonary lesions 10-30 mm in size in human cadavers. These findings support further exploration of this technology in prospective clinical trials in live human subjects.

Intrabronchial Valves for Air Leaks After Lobectomy, Segmentectomy, and Lung Volume Reduction Surgery.

PURPOSE: Air leaks are common after lobectomy, segmentectomy, and lung volume reduction surgery (LVRS). This can increase post-operative morbidity, cost, and hospital length of stay. The management of post-pulmonary resection air leaks remains challenging. Minimally invasive effective interventions are necessary. The Spiration Valve System (SVS, Olympus/Spiration Inc., Redmond, WA, US) is approved by the FDA under humanitarian use exemption for management of prolonged air leaks. METHODS: This is a prospective multicenter registry of 39 patients with air leaks after lobectomy, segmentectomy, and LVRS managed with an intention to use bronchoscopic SVS to resolve air leaks. RESULTS: Bronchoscopic SVS placement was feasible in 82.1% of patients (32/39 patients) and 90 valves were placed with a median of 2 valves per patient (mean of 2.7 ± 1.5 valves, range of 1 to 7 valves). Positive response to SVS placement was documented in 76.9% of all patients (30/39 patients) and in 93.8% of patients when SVS placement was feasible (30/32 patients). Air leaks ultimately resolved when SVS placement was feasible in 87.5% of patients (28/32 patients), after a median of 2.5 days (mean ± SD of 8.9 ± 12.4 days). Considering all patients with an intention to treat analysis, bronchoscopic SVS procedure likely contributed to resolution of air leaks in 71.8% of patients (28/39 patients). The post-procedure median hospital stay was 4 days (mean 6.0 ± 6.1 days). CONCLUSIONS: This prospective registry adds to the growing body of literature supporting feasible and effective management of air leaks utilizing one-way valves.

A Multicenter Randomized Controlled Trial of Zephyr Endobronchial Valve Treatment in Heterogeneous Emphysema (LIBERATE).

RATIONALE: This is the first multicenter randomized controlled trial to evaluate the effectiveness and safety of Zephyr Endobronchial Valve (EBV) in patients with little to no collateral ventilation out to 12 months. OBJECTIVES: To evaluate the effectiveness and safety of Zephyr EBV in heterogeneous emphysema with little to no collateral ventilation in the treated lobe. METHODS: Subjects were enrolled with a 2:1 randomization (EBV/standard of care [SoC]) at 24 sites. Primary outcome at 12 months was the ΔEBV-SoC of subjects with a post-bronchodilator FEV1 improvement from baseline of greater than or equal to 15%. Secondary endpoints included absolute changes in post-bronchodilator FEV1, 6-minute-walk distance, and St. George's Respiratory Questionnaire scores. MEASUREMENTS AND MAIN RESULTS: A total of 190 subjects (128 EBV and 62 SoC) were randomized. At 12 months, 47.7% EBV and 16.8% SoC subjects had a ΔFEV1 greater than or equal to 15% (P < 0.001). ΔEBV-SoC at 12 months was statistically and clinically significant: for FEV1, 0.106 L (P < 0.001); 6-minute-walk distance, +39.31 m (P = 0.002); and St. George's Respiratory Questionnaire, -7.05 points (P = 0.004). Significant ΔEBV-SoC were also observed in hyperinflation (residual volume, -522 ml; P < 0.001), modified Medical Research Council Dyspnea Scale (-0.8 points; P < 0.001), and the BODE (body mass index, airflow obstruction, dyspnea, and exercise capacity) index (-1.2 points). Pneumothorax was the most common serious adverse event in the treatment period (procedure to 45 d), in 34/128 (26.6%) of EBV subjects. Four deaths occurred in the EBV group during this phase, and one each in the EBV and SoC groups between 46 days and 12 months. CONCLUSIONS: Zephyr EBV provides clinically meaningful benefits in lung function, exercise tolerance, dyspnea, and quality of life out to at least 12 months, with an acceptable safety profile in patients with little or no collateral ventilation in the target lobe. Clinical trial registered with www.clinicaltrials.gov (NCT 01796392).

Application of 3D Printing for Patient-Specific Silicone Stents: 1-Year Follow-Up on 2 Patients.

Managing complex benign airway disease is a major challenge in interventional pulmonology. Airway stent placement can result in complications due to a variety of factors, including poor fit of the stent in the airway. We report the 1-year outcome of 2 patients with airway disease caused by granulomatosis with polyangiitis (Wegener's) affecting the left main bronchus and secondary carina. These patients had not responded to systemic therapy or standard bronchoscopic techniques and had complications with commercially available airway stents. We describe a first-in-human, clinical experience to address these issues. Using computed tomography (CT) imaging and 3D printing technology, we generated and implanted patient-specific silicone airway stents to address airway disease. 3D patient-specific stent prescription was created using a CT scan of the patient's chest and a proprietary software package originally developed for orthopedic surgical planning. Silicone stents were manufactured and implanted. Observation for > 1 year after implantation compared to the 6 months prior to patient-specific stent implant were compared for the number, clinically required stent changes, procedure time, and general clinical improvement per usual standard of care after airway stenting. Patients showed improved durability, a shorter procedure time, and improvement of patient-reported symptoms leading to a reduced need for stent changes and modifications. The use of 3D printing technology to make patient-specific silicone stents is feasible with early clinical proof of concept noting a durable improvement over 1 year of follow-up.

A Prediction Model to Help with the Assessment of Adenopathy in Lung Cancer: HAL.

RATIONALE: Estimating the probability of finding N2 or N3 (prN2/3) malignant nodal disease on endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) in patients with non-small cell lung cancer (NSCLC) can facilitate the selection of subsequent management strategies. OBJECTIVES: To develop a clinical prediction model for estimating the prN2/3. METHODS: We used the AQuIRE (American College of Chest Physicians Quality Improvement Registry, Evaluation, and Education) registry to identify patients with NSCLC with clinical radiographic stage T1-3, N0-3, M0 disease that had EBUS-TBNA for staging. The dependent variable was the presence of N2 or N3 disease (vs. N0 or N1) as assessed by EBUS-TBNA. Univariate followed by multivariable logistic regression analysis was used to develop a parsimonious clinical prediction model to estimate prN2/3. External validation was performed using data from three other hospitals. MEASUREMENTS AND MAIN RESULTS: The model derivation cohort (n = 633) had a 25% prevalence of malignant N2 or N3 disease. Younger age, central location, adenocarcinoma histology, and higher positron emission tomography-computed tomography N stage were associated with a higher prN2/3. Area under the receiver operating characteristic curve was 0.85 (95% confidence interval, 0.82-0.89), model fit was acceptable (Hosmer-Lemeshow, P = 0.62; Brier score, 0.125). We externally validated the model in 722 patients. Area under the receiver operating characteristic curve was 0.88 (95% confidence interval, 0.85-0.90). Calibration using the general calibration model method resulted in acceptable goodness of fit (Hosmer-Lemeshow test, P = 0.54; Brier score, 0.132). CONCLUSIONS: Our prediction rule can be used to estimate prN2/3 in patients with NSCLC. The model has the potential to facilitate clinical decision making in the staging of NSCLC.

Rigid bronchoscopy.

The purpose of this article is to provide an introduction to rigid bronchoscopy (RB). We will briefly discuss its history, evolution, and resurgence while we highlight its versatility and usefulness for today's interventional pulmonologist and thoracic surgeon. Despite being one of the earliest pulmonary procedures described, RB is still an important technique. Advances in thoracic medicine have made this skill critical for a fully functional interventional pulmonary program. If the interventional pulmonologist of this century is to be successful, he or she should be facile in this technique. Despite the availability of RB for decades, the invention of flexible bronchoscopy in 1966 led to a significant downturn in its usage. The growth of the interventional pulmonology field brought RB back into the spot light. Apart from the historic role of RB in treatment of central airway lesions and mechanical debulking of endobronchial lesions, RB is the key instrument that can adapt modern therapeutic tools such as laser, argon plasma coagulation, electrocautery, cryotherapy, and stent deployment. Performing RB requires proper preprocedure preparation, exceptional understanding of upper airway anatomy, specific hand-eye coordination, and open communication between the bronchoscopist and the anesthesiologist. These skills can be primarily learned and maintained with repetition. This article will review information relevant to this technique and lay a foundation to be built upon for years to come.

Use of Mitomycin-C in Laryngotracheal Stenosis: A Focused Clinical Review.

BACKGROUND: Therapeutic options for managing laryngotracheal stenosis (LTS) are limited. Endoscopy is a minimally invasive approach to treating LTS, but carries a high risk of stenosis recurrence. Mitomycin C (MMC) is often used as an adjunct therapy to delay the time to symptomatic recurrence of LTS. This review synthesizes the current literature on the topic of MMC as an adjunct treatment strategy for LTS. METHODS: A focused literature search was carried out from PubMed on June 12, 2022 using the terms "mitomycin c AND stenosis" in all fields with no date limitations. Evidence-based recommendations relevant to the clinical application of MMC as an adjunct therapy for LTS were formulated. Three questions were addressed: 1) efficacy of MMC, 2) single versus multiple application(s) of MMC, and 3) safety of MMC. The evidence rating and recommendation strength were guided by the GRADE system. RESULTS: Twenty-nine studies were reviewed. The efficacy of MMC as an adjunct therapy for LTS varied across studies. Randomized controlled trials have not shown an outcome difference with MMC use, although methodologic flaws including underpowering were noted. A meta-analysis of observational studies with a comparator arm found the unadjusted probability of remaining symptom-free for > 1 year is greater with versus without MMC application (73% vs. 35%). Single versus multiple application(s) of MMC resulted in similar restenosis rates at long-term follow-up. Complications related to MMC use are rarely reported using conventional doses (0.4 mg/mL). Overall, the quality of evidence was low and the recommendation for intervention was weak. CONCLUSION: The role for MMC as an adjunct therapy in LTS is uncertain. While safe in its application, the efficacy of MMC in reducing stenosis recurrence remains a matter of debate. Large, prospective studies are needed to inform future recommendations.

Ergonomics of bronchoscopy: good advice or a pain in the neck?

Interventional pulmonologists require a unique set of skills including precise motor abilities and physical endurance, but surprisingly the application of ergonomic principles in the field of bronchoscopy remains limited. This is particularly intriguing when considering the significant impact that poor ergonomics can have on diagnostic aptitude, income potential and overall health. It is therefore imperative to provide comprehensive education to physicians regarding the significance of ergonomics in their work, especially considering the introduction of advanced diagnostic and therapeutic procedures. By implementing simple yet effective measures (e.g. maintaining neutral positions of the wrist, neck and shoulder; adjusting the height of tables and monitors; incorporating scheduled breaks; and engaging in regular exercises), the risk of injuries can be substantially reduced. Moreover, objective tools are readily available to assess ergonomic postures and estimate the likelihood of work-related musculoskeletal injuries. This review aims to evaluate the current literature on the impact of procedure-related musculoskeletal pain on practising pulmonologists and identify modifiable factors for future research.

Short-term Endoscopic Outcomes of Balloon and Rigid Bronchoplasty in the Management of Benign Subglottic and Tracheal Stenosis.

BACKGROUND: Endoscopic therapies are firmly established in the management algorithm of benign subglottic and tracheal stenosis (SGTS). The optimal dilation strategy, however, has yet to be elucidated. The objective of this study was to compare the efficacy and safety of balloon versus rigid bronchoplasty in the treatment of benign SGTS. METHODS: De novo cases of benign SGTS at our institution over a 9-year period were retrospectively identified. Patients were divided into 2 groups based on the initial dilation strategy of balloon or rigid bronchoplasty. Demographics, clinical findings, concurrent interventions, lesion characteristics, and complications were analyzed. Two reviewers independently assigned an index and follow-up endoscopic stenosis grade for each case. The mean stenosis grade at follow-up in both groups was then calculated and compared. RESULTS: Sixty-three patients with benign SGTS were included. Most stenoses in the rigid (80%) and balloon (63%) bronchoplasty groups were complex ( P =0.174). In addition, 94% (59/63) of index stenoses were classified as Cotton Myer Grade 3. At follow-up, no significant difference was found in the mean stenosis grade between dilation strategies (1.97 vs. 2.2, P =0.287). Furthermore, no procedural-related complications were observed in either group. CONCLUSION: Balloon and rigid bronchoplasty are safe and effective endoscopic tools in the early management of benign SGTS. A multimodality approach centered around mucosal sparing techniques remains vitally important to the overall and likely long-term success of treating this challenging disease entity.

Robotic Bronchoscopy for Peripheral Pulmonary Lesions: A Multicenter Pilot and Feasibility Study (BENEFIT).

BACKGROUND: The diagnosis of peripheral pulmonary lesions (PPL) continues to present clinical challenges. Despite extensive experience with guided bronchoscopy, the diagnostic yield has not improved significantly. Robotic-assisted bronchoscopic platforms have been developed potentially to improve the diagnostic yield for PPL. Presently, limited data exist that evaluate the performance of robotic systems in live human subjects. RESEARCH QUESTION: What is the safety and feasibility of robotic-assisted bronchoscopy in patients with PPLs? STUDY DESIGN AND METHODS: This was a prospective, multicenter pilot and feasibility study that used a robotic bronchoscopic system with a mother-daughter configuration in patients with PPL 1 to 5 cm in size. The primary end points were successful lesion localization with the use of radial probe endobronchial ultrasound (R-EBUS) imaging and incidence of procedure related adverse events. Robotic bronchoscopy was performed in patients with the use of direct visualization, electromagnetic navigation, and fluoroscopy. After the use of R-EBUS imaging, transbronchial needle aspiration was performed. Rapid on-site evaluation (ROSE) was used on all cases. Transbronchial needle aspiration alone was sufficient when ROSE was diagnostic; when ROSE was not diagnostic, transbronchial biopsy was performed with the use of the robotic platform, followed by conventional guided bronchoscopic approaches at the discretion of the investigator. RESULTS: Fifty-five patients were enrolled at five centers. One patient withdrew consent, which left 54 patients for data analysis. Median lesion size was 23 mm (interquartile range, 15 to 29 mm). R-EBUS images were available in 53 of 54 cases. Lesion localization was successful in 51 of 53 patients (96.2%). Pneumothorax was reported in two of 54 of the cases (3.7%); tube thoracostomy was required in one of the cases (1.9 %). No additional adverse events occurred. INTERPRETATION: This is the first, prospective, multicenter study of robotic bronchoscopy in patients with PPLs. Successful lesion localization was achieved in 96.2% of cases, with an adverse event rate comparable with conventional bronchoscopic procedures. Additional large prospective studies are warranted to evaluate procedure characteristics, such as diagnostic yield. CLINICAL TRIAL REGISTRATION: ClinicalTrials.gov; No.: NCT03727425; URL: www.clinicaltrials.gov.

Predicting Lymph Node Metastasis in Non-small Cell Lung Cancer: Prospective External and Temporal Validation of the HAL and HOMER Models.

BACKGROUND: Two models, the Help with the Assessment of Adenopathy in Lung cancer (HAL) and Help with Oncologic Mediastinal Evaluation for Radiation (HOMER), were recently developed to estimate the probability of nodal disease in patients with non-small cell lung cancer (NSCLC) as determined by endobronchial ultrasound-transbronchial needle aspiration (EBUS-TBNA). The objective of this study was to prospectively externally validate both models at multiple centers. RESEARCH QUESTION: Are the HAL and HOMER models valid across multiple centers? STUDY DESIGN AND METHODS: This multicenter prospective observational cohort study enrolled consecutive patients with PET-CT clinical-radiographic stages T1-3, N0-3, M0 NSCLC undergoing EBUS-TBNA staging. HOMER was used to predict the probability of N0 vs N1 vs N2 or N3 (N2|3) disease, and HAL was used to predict the probability of N2|3 (vs N0 or N1) disease. Model discrimination was assessed using the area under the receiver operating characteristics curve (ROC-AUC), and calibration was assessed using the Brier score, calibration plots, and the Hosmer-Lemeshow test. RESULTS: Thirteen centers enrolled 1,799 patients. HAL and HOMER demonstrated good discrimination: HAL ROC-AUC = 0.873 (95%CI, 0.856-0.891) and HOMER ROC-AUC = 0.837 (95%CI, 0.814-0.859) for predicting N1 disease or higher (N1|2|3) and 0.876 (95%CI, 0.855-0.897) for predicting N2|3 disease. Brier scores were 0.117 and 0.349, respectively. Calibration plots demonstrated good calibration for both models. For HAL, the difference between forecast and observed probability of N2|3 disease was +0.012; for HOMER, the difference for N1|2|3 was -0.018 and for N2|3 was +0.002. The Hosmer-Lemeshow test was significant for both models (P = .034 and .002), indicating a small but statistically significant calibration error. INTERPRETATION: HAL and HOMER demonstrated good discrimination and calibration in multiple centers. Although calibration error was present, the magnitude of the error is small, such that the models are informative.

Dexmedetomidine for anesthetic management of anterior mediastinal mass.

Anesthetic management of anterior mediastinal masses (AMM) is challenging. We describe the successful anesthetic management of two patients with AMM in which dexmedetomidine was used at supra-sedative doses. Our first case was a 41-year-old man who presented with a 10 x 9 x 11 cm AMM, a pericardial effusion, compression of the right atrium, and superior vena cava syndrome. He had severe obstruction of the right mainstem bronchus, distal trachea with tumor compression, and endobronchial tumor invasion. Our second case was a 62-year-old man with tracheal and bronchial obstruction secondary to a recurrent non-small-cell lung cancer mediastinal mass. Both patients were scheduled for laser tumor debulking and treatment of the tracheal compression with a Y-stent placed through a rigid bronchoscope. Both patients were fiberoptically intubated awake under sedation using a dexmedetomidine infusion, followed by general anesthesia (mainly using higher doses of dexmedetomidine), thus maintaining spontaneous ventilation and avoiding muscle relaxation during a very stimulating procedure. The amnestic and analgesic properties of dexmedetomidine were particularly helpful. Maintaining spontaneous ventilation with dexmedetomidine as almost the sole anesthetic could be very advantageous and may reduce the risk of complete airway obstruction in the anesthetic management of AMMs.

Anastomotic airway complications after lung transplantation.

PURPOSE OF REVIEW: Anastomotic airway complications continue to plague recovery after lung transplantation and serve as a major source of morbidity and mortality. Prevalence has surprisingly remained relatively constant over the last decade, despite improvement in overall transplant survival. RECENT FINDINGS: Anastomotic airway complications occur in about one-fifth of patients following lung transplantation and are formidable and persistent problems. Technical issues associated with complications are difficult to define, but may include telescoping anastomoses and donor-recipient size mismatch. Endobronchial therapy of complications has reduced early mortality, but may not impact the late deleterious consequences of these complications. A therapeutic algorithm has been developed to assist clinicians. SUMMARY: Despite increasing experience, anastomotic airway complications remain problematic. Continued investigation into this process appears warranted, given the impact and prevalence. Very few risk factors currently appear modifiable, however.

Bronchoscopic lung volume reduction with valves: What should the internist know?

Traditional therapies for emphysema such as bronchodilators and anti-inflammatory drugs have limited value due to permanent structural changes in the emphysematous lung that result in hyperinflation. Surgical lung volume reduction partially corrects hyperinflation by removing emphysematous lung and is an option in selected patients, but it carries a risk of morbidity and death. Valve therapy is a less-invasive option that involves bronchoscopic implantation of 1-way valves in emphysematous lung segments to allow air flow and mucus clearance in the direction of central airways. The authors review the rationale, evidence, and applications of valve therapy.

Role of Endobronchial Ultrasound-guided Transbronchial Needle Aspiration in the Diagnosis and Management of Mediastinal Cyst.

BACKGROUND: Foregut cysts account for >50% of cystic lesions in the mediastinum, of which bronchogenic cysts are most common. Surgical resection is the most definitive approach for its diagnosis and treatment. A recent systematic review, however, suggests that endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) has a role in the management of bronchogenic cyst. We report our experience with EBUS-TBNA in the diagnosis and management of bronchogenic cysts. METHODS: Medical records of patients with evidence of mediastinal cysts who underwent EBUS-TBNA between 2008 and 2016 were reviewed.The primary aims of this study were to assess EBUS-TBNA diagnostic yield of peri-bronchial cysts and their specific type/origin and to determine its short-term and long-term drainage efficacy. RESULTS: A total of 26 patients met the inclusion criteria. The cytopathology diagnosis was compatible with bronchogenic cyst in 4 cases, pleural-pericardial cyst in 3 cases, and 19 were indeterminate cysts. Successful long-term treatment occurred in 5.5% of the subjects. One patient developed inflammatory pericarditis after EBUS-TBNA. CONCLUSION: Diagnostic and therapeutic yield of EBUS-TBNA for mediastinal cysts is limited and surgical resection remains the treatment of choice.

A Single-Center Case Series Describing Tracheobronchial Bonastent Implantation.

BACKGROUND: The Bonastent is one of the newest self-expanding metallic tracheobronchial prostheses being used in the central airways. Experience with this stent is limited; there is a gap in literature. We report herein a case series of Bonastent implantation across a variety of tracheobronchial pathologies. METHODS: All adult patients who had a Bonastent implanted within the tracheobronchial tree between November 2017 through May 2018 were included in this case series. Data were derived from a combination of sources: electronic medical records and a Research Electronic Data Capture-based bronchoscopy registry. Demographic, procedural, and short-term outcome data were collected for each patient. RESULTS: Thirteen Bonastents were implanted in 11 patients during the observational period. Seven patients were male (64%); the mean age was 62.2 years. The most common indication was nonmalignant airway obstruction in a transplanted lung (n=6, 56%). Over half of all stents (n=8) were implanted in the bronchus intermedius. Three patients (27%) had clinically significant obstruction from their Bonastent. CONCLUSION: The Bonastent is the newest self-expanding metallic endotracheobronchial stent on the market. Like any other stent, it has its advantages and drawbacks. Interestingly, we noted 3 instances of tissue ingrowth through the covered portion of the stent. Larger studies with a longer follow-up periods are needed to assess long-term efficacy and safety of this relatively novel stent.

3D printing for airway disease.

It has been 30 years since the first commercial three-dimensional (3D) printer was available on market. The technological advancement of 3D printing has far exceeded its implementation in medicine. The application of 3D printing technology has the potential of playing a major role within interventional pulmonology; specifically, in the management of complex airway disease. Tailoring management to the patient-specific anatomical malformation caused by benign or malignant disease is a major challenge faced by interventional pulmonologists. Such cases often require adjunctive therapeutic procedures with thermal therapies followed by dilation and airway stenting to maintain the patency of the airway. Airway-stent size matching is one key to reducing stent-related complications. A major barrier to matching is the expansion of the stent in two dimensions (fixed sizes in length and diameter) within the deformed airway. Additional challenges are created by the subjective oversizing of the stent to reduce the likelihood of migration. Improper sizing adversely affects the stability of the stent. The stent-airway mismatch can be complicated by airway erosion, perforation, or the formation of granulation tissue. Stents can migrate, fracture, obstruct, or become infected. The use of patient-specific 3D printed airway stents may be able to reduce the stent airway mismatch. These stents allow more precise stent-airway sizing and minimizes high-pressure points on distorted airway anatomy. In theory, this should reduce the incidence of the well-known complications of factory manufactured stents. In this article, the authors present the brief history of 3D printed stents, their consideration in select patients, processing steps for development, and future direction.