Effect of poly (lactic-co-glycolic acid) polymer nanoparticles loaded with vancomycin against Staphylococcus aureus biofilm.

Staphylococcus aureus is a unique challenge for the healthcare system because it can form biofilms, is resistant to the host's immune system, and is resistant to numerous antimicrobial therapies. The aim of this study was to investigate the effect of poly (lactic-co-glycolic acid) (PLGA) polymer nanoparticles loaded with vancomycin and conjugated with lysostaphin (PLGA-VAN-LYS) on inhibiting S. aureus biofilm formation. Nano drug carriers were produced using the double emulsion evaporation process. we examined the physicochemical characteristics of the nanoparticles, including particle size, polydispersity index (PDI), zeta potential, drug loading (DL), entrapment efficiency (EE), Lysostaphin conjugation efficiency (LCE), and shape. The effect of the nano drug carriers on S. aureus strains was evaluated by determining the minimum inhibitory concentration (MIC), conducting biofilm formation inhibition studies, and performing agar well diffusion tests. The average size, PDI, zeta potential, DL, EE, and LCE of PLGA-VAN-LYS were 320.5 ± 35 nm, 0.270 ± 0.012, -19.5 ± 1.3 mV, 16.75 ± 2.5%, 94.62 ± 2.6%, and 37% respectively. Both the agar well diffusion and MIC tests did not show a distinction between vancomycin and the nano drug carriers after 72 h. However, the results of the biofilm analysis demonstrated that the nano drug carrier had a stronger inhibitory effect on biofilm formation compared to the free drug. The use of this technology for treating hospital infections caused by the Staphylococcus bacteria may have favorable effects on staphylococcal infections, considering the efficacy of the nano medicine carrier developed in this study.

Effects of Secondary Dopant Anions on Emissivity and Related Properties of Poly(3,4-ethylenedioxythiophene).

Smart materials that are energy efficient and take up less space are crucial in the development of new technologies. Electrochromic polymers (ECPs) are one such class of materials that actively change their optical behavior in both visible and infrared parts of the electromagnetic spectrum. They show promise in a wide range of applications, from active camouflage to smart displays/windows. The full capabilities of ECPs are still yet to be explored, for while their electrochromic properties are well established, their Infrared (IR) modulation is less reported on. This study addresses the potential of ECPs in active IR modulating devices by optimization of Vapor Phase Polymerized poly(3,4-ethylenedioxythiophene) (PEDOT) thin films via the substitution of its dopant anion. Dynamic ranges denoting emissivity changes between reduced and oxidized states of PEDOT are found across dopants of tosylate, bromide, sulfate, chloride, perchlorate, and nitrate. Relative to the emissivity of reduced (neutral) PEDOT, a range of ±15% is achieved from the doped PEDOT films, and a maximum dynamic range of 0.11 across a 34% change is recorded for PEDOT doped with perchlorate.

Evaluation of a pharmaceutical risk-sharing agreement when patients are screened for the probability of success.

We analyze a game-theoretic model of a risk-sharing agreement between a payer and a pharmaceutical firm. The drug manufacturer chooses the price while the payer sets the rebate rate and decides which patients are eligible for treatment. The manufacturer provides the payer with a rebate for nonresponding patients. We generalize on the existing literature, by making both price and rebate rate decision variables, allowing the rebate rate to be different from 100%, and incorporating 2 types of administrative costs. We identify a threshold for the expected probability of response for classifying the drug as a mass-market or niche type and investigate the optimal solutions for both types. We also identify a threshold for the rebate rate at which the net benefits become equal for responding and nonresponding patients. Through numerical examples, we examine how various parameters impact the drug manufacturer's and the payer's optimal solution.

Vancomycin and nisin-modified magnetic Fe3O4@SiO2 nanostructures coated with chitosan to enhance antibacterial efficiency against methicillin resistant Staphylococcus aureus (MRSA) infection in a murine superficial wound model.

BACKGROUND: The objective of this research was to prepare some Fe3O4@SiO2@Chitosan (CS) magnetic nanocomposites coupled with nisin, and vancomycin to evaluate their antibacterial efficacy under both in vitro and in vivo against the methicillin-resistant Staphylococcus. aureus (MRSA). METHODS: In this survey, the Fe3O4@SiO2 magnetic nanoparticles (MNPs) were constructed as a core and covered the surface of MNPs via crosslinking CS by glutaraldehyde as a shell, then functionalized with vancomycin and nisin to enhance the inhibitory effects of nanoparticles (NPs). X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), field emission scanning electron microscope (FE-SEM), vibrating sample magnetometer (VSM), and dynamic light scattering (DLS) techniques were then used to describe the nanostructures. RESULTS: Based on the XRD, and FE-SEM findings, the average size of the modified magnetic nanomaterials were estimated to be around 22-35 nm, and 34-47 nm, respectively. The vancomycin was conjugated in three polymer-drug ratios; 1:1, 2:1 and 3:1, with the percentages of 45.52%, 35.68%, and 24.4%, respectively. The polymer/drug ratio of 1:1 exhibited the slowest release rate of vancomycin from the Fe3O4@SiO2@CS-VANCO nanocomposites during 24 h, which was selected to examine their antimicrobial effects under in vivo conditions. The nisin was grafted onto the nanocomposites at around 73.2-87.2%. All the compounds resulted in a marked reduction in the bacterial burden (P-value < 0.05). CONCLUSION: The vancomycin-functionalized nanocomposites exhibited to be more efficient in eradicating the bacterial cells both in vitro and in vivo. These findings introduce a novel bacteriocin-metallic nanocomposite that can suppress the normal bacterial function on demand for the treatment of MRSA skin infections.

The electronic origins of the "rare earth" texture effect in magnesium alloys.

Although magnesium alloys are lightweight, recyclable and relatively cheap, they suffer from poor ductility. This can be improved by the addition of rare earth (RE) elements, and this is now a well-established criterion for wrought alloy design. It is notable that this behavior is largely restricted to the lanthanides, but no hypothesis is yet available to explain why other elements do not have the same effect. To answer this question, ab initio simulations of crystallographically complex boundaries have been undertaken to examine the electronic origin of the RE effect. While the electronic structure provided strong bonding between the RE elements and their Mg surroundings, local disruption in atomic arrangement at the grain boundaries was found to modify this effect. This work shows quantifiable changes in electronic structure of solutes resulting from grain boundary crystallography, and is suggested to be a contributing factor to the RE texture effect.

Preparation, Statistical Optimization and Characterization of Propolis-Loaded Solid Lipid Nanoparticles Using Box-Behnken Design.

Purpose: Propolis is a resinous material obtained by honeybees with many biological and pharmacological properties which can be used for treatment of various diseases. Current study aims to formulate and characterize propolis-loaded solid lipid nanoparticles (SLNs) carrier system. Methods: The prepared SLNs, composed of glyceryl monostearate (GMS), Soy lecithin, Tween 80 and polyethylene glycol 400 (PEG 400), were fabricated employing solvent emulsification-evaporation technique. In addition, the impact of several variables including concentration ratios of GMS/Soy lecithin and PEG 400/Tween 80 along with emulsification time were evaluated on the size, polydispersity index (PDI) and zeta potential of particles. SLN formulations were optimized using Box-Behnken design. The particles were freeze dried and morphologically studied by scanning electron microscopy (SEM). The in-vitro release profile of propolis entrapped in the optimized nanoparticles was investigated. Results: The mean particle size, PDI, zeta potential, entrapment efficiency (EE) and loading efficiency (LE) of optimized propolis-loaded SLNs were found to be 122.6±22.36 nm, 0.28±0.06, -26.18±3.3 mV, 73.57±0.86% and 3.29±0.27%, respectively. SEM images exhibited nanoparticles to be non-aggregated and in spherical shape. The in-vitro release study showed prolonged release of propolis from nanoparticles. Conclusion: The results implied that the proposed way of SLN preparation could be considered as a proper method for production of propolis loaded colloidal carrier system.

Ultrahigh specific strength in a magnesium alloy strengthened by spinodal decomposition.

Strengthening of magnesium (Mg) is known to occur through dislocation accumulation, grain refinement, deformation twinning, and texture control or dislocation pinning by solute atoms or nano-sized precipitates. These modes generate yield strengths comparable to other engineering alloys such as certain grades of aluminum but below that of high-strength aluminum and titanium alloys and steels. Here, we report a spinodal strengthened ultralightweight Mg alloy with specific yield strengths surpassing almost every other engineering alloy. We provide compelling morphological, chemical, structural, and thermodynamic evidence for the spinodal decomposition and show that the lattice mismatch at the diffuse transition region between the spinodal zones and matrix is the dominating factor for enhancing yield strength in this class of alloy.