Toxicity and mutagenicity of low-metallic automotive brake pad materials.

Organic friction materials are standardly used in brakes of small planes, railroad vehicles, trucks and passenger cars. The growing transportation sector requires a better understanding of the negative impact related to the release of potentially hazardous materials into the environment. This includes brakes which can release enormous quantities of wear particulates. This paper addresses in vitro detection of toxic and mutagenic potency of one model and two commercially available low-metallic automotive brake pads used in passenger cars sold in the EU market. The model pad made in the laboratory was also subjected to a standardized brake dynamometer test and the generated non-airborne wear particles were also investigated. Qualitative "organic composition" was determined by GC/MS screening of dichloromethane extracts. Acute toxicity and mutagenicity of four investigated sample types were assessed in vitro by bioluminescence assay using marine bacteria Vibrio fischeri and by two bacterial bioassays i) Ames test on Salmonella typhimurium His(-) and ii) SOS Chromotest using Escherichia coli PQ37 strain. Screening of organic composition revealed a high variety of organic compounds present in the initial brake pads and also in the generated non-airborne wear debris. Several detected compounds are classified by IARC as possibly carcinogenic to humans, e. g. benzene derivatives. Acute toxicity bioassay revealed a response of bacterial cells after exposure to all samples used. Phenolic resin and wear debris were found to be acutely toxic; however in term of mutagenicity the response was negative. All non-friction exposed brake pad samples (a model pad and two commercial pad samples) were mutagenic with metabolic activation in vitro.

(Anti)mutagenic and immunomodulatory properties of quercetin glycosides.

BACKGROUND: Quercetin-3-O-ß-D-glucopyranoside (isoquercitrin) and quercetin-3-O-rutinoside (rutin) are common components of a normal human diet and are increasingly used in food supplements. Here their effect on mutagenesis and immunity is shown. RESULTS: The in vitro (anti)mutagenic potential was compared with that of quercetin using the Ames test in Salmonella typhimurium His(-) strains TA100, TA98 and TA102. Isoquercitrin only slightly increased the number of revertants, while rutin was totally non-mutagenic. On the other hand, all compounds displayed dose-dependent protective activity against H2O2 - and tert-butyl hydroperoxide-induced oxidative damage to the TA102 strain and at 75 µmol L(-1) inhibited H2O2/Fe(2+)-induced formation of the open circular and linear forms of the DNA plasmid pBSIISK(-). In mice, none of the flavonols (0.86 µmol day(-1), 34 days) induced harmful effects. In immunized animals, all compounds enhanced ex vivo B cell proliferation; quercetin stimulated lymphocyte basal proliferation and increased the number of IgM-producing lymphocytes. Rutin promoted NK cytotoxic activity, supported T cells and enhanced gut epithelium renewal. No effect on IgG-forming cells was found. CONCLUSION: Isoquercitrin displayed negligible and rutin no mutagenicity, but both showed significant antimutagenic and DNA-protective effects against oxidative damage. In vivo, they supported the readiness of the immune system for specific humoral immune response.

Electrochemical, Biological, and Technological Properties of Anodized Titanium for Color Coded Implants.

Anodization coloring of titanium tools or implants is one of the common methods for the differentiation of each application by its size or type. Commercial purity titanium grade 4 plates (50 × 20 × 0.1 mm) were tested to obtain their electrochemical and other technological properties. The coloring process was done using the potential of 15, 30, 45, 60, and 75 Volts for 5 s in 1 wt. % citric acid in demineralized water solution. Organic acids solutions generally produce better surface quality compared to inorganic acids. The contact angle of colored surfaces was measured by the sessile drop method. Electrochemical impedance spectroscopy and potentiodynamic polarization were used for the determination of selected electrochemical and corrosion parameters of the tested surfaces. It was found that the anodization process decreases corrosion potential significantly. It was also confirmed that a higher potential used for anodization results in higher polarization resistance but also a decrease in corrosion potential. The anodization process at 75 V produces surfaces with the lowest corrosion rate under 1 nm/year and the noblest corrosion potential. It was confirmed that the anodization process in citric acid does not affect titanium cytotoxicity.

Biodeterioration of Compost-Pretreated Polyvinyl Chloride Films by Microorganisms Isolated From Weathered Plastics.

Polyvinyl chloride (PVC) is a petroleum-based plastic used in various applications, polluting the environment because of its recalcitrance, large content of additives, and the presence of halogen. In our case study, a new, two-stage biodegradation technology that combined composting process used for PVC pretreatment with a subsequent PVC attack by newly-isolated fungal and bacterial strains under SSF conditions was used for biodegradation of commercial PVC films. The novelty consisted in a combined effect of the two biodegradation processes and the use for augmentation of microbial strains isolated from plastic-polluted environments. First, the ability of the newly-isolated strains to deteriorate PVC was tested in individual, liquid-medium- and SSF cultures. Higher mass-reductions of PVC films were obtained in the former cultures, probably due to a better mass transfer in liquid phase. Using the two-stage biodegradation technology the highest cumulative mass-reductions of 29.3 and 33.2% of PVC films were obtained after 110 days with Trichoderma hamatum and Bacillus amyloliquefaciens applied in the second stage in the SSF culture, respectively. However, FTIR analysis showed that the mass-reductions obtained represented removal of significant amounts of additives but the PVC polymer chain was not degraded.

Resistant Genes and Multidrug-Resistant Bacteria in Wastewater: A Study of Their Transfer to the Water Reservoir in the Czech Republic.

Wastewater is considered the most serious source of the spread of antibiotic resistance in the environment. This work, therefore, focuses on the fate and spread of antibiotic resistance genes (ARGs) in wastewater and the monitoring of multidrug-resistant strains. ARGs were monitored in the nitrification and sedimentation tanks of the wastewater treatment plant (WWTP) and in the dam into which this WWTP flows, at various times. The highest relative abundance was found for the blaTEM > tetW > blaNDM-1 > vanA resistance genes, respectively. An increased concentration of tetracycline (up to 96.00 ng/L) and ampicillin (up to 19.00 ng/L) was found in water samples compared to other antibiotics detected. The increased incidence of seven ARGs and four antibiotics was observed in the November and December sampling times. Isolated ampicillin-resistant strains showed a high degree of resistance to ampicillin (61.2% of the total isolates had a minimum inhibitory concentration (MIC) ≥ 20 mg/mL). In 87.8% of isolates, out of the total number, the occurrence of two or more ARGs was confirmed. These multidrug-resistant strains were most often identified as Aeromonas sp. This strain could represent a significant role in the spread of multidrug resistance through wastewater in the environment.

Fungal pretreatment parameters for improving methane generation from anaerobic digestion of corn silage.

Corn silage was treated by white rot fungi (WRF) to investigate the effect of pretreatment on material's ability to produce methane in anaerobic digestion (AD). The selective fungi Pleurotus ostreatus and Dichomitus squalens promoted biogas generation, whereas the non-selective Trametes versicolor and Irpex lacteus had negative effect. Cumulative methane production after 10-day pretreatment with P. ostreatus at 28 °C rose 1.55-fold. The longer pretreatments of 30 and 60-days had smaller effect. When the pretreatment with P. ostreatus was carried out at 40 °C a high H2S release affected the AD process. Effect of WRF action dependent on the type of corn silage. With typical corn silage, the lignin depolymerisation raised the methane generation from 0.301 to 0.465 m3kgVS-1. In contrast, extensive decomposition of hemicellulose in hybrid corn silage deteriorated the effect of pretreatment on methane production.

Biocompatibility and biocidal effects of modified polylactide composites.

Polylactide (PLA) materials treated with antimicrobial fillers represent a suitable alternative to the production of medical devices. Their advantage is that they can prevent the growth of microorganisms and the formation of microbial biofilms on the surface and around composites. The work is focused on the evaluation of biocompatibility and biocide effect of PLA composite films filled with vermiculite and graphene oxide modified with silver (Ag+ and Ag nanoparticles), hexadecylpyridinium (HDP) and hexadecyltrimethylammonium (HDTMA) cations and their degradation leachates monitored at 1-3-6-month intervals. The antimicrobial effect of the leachates was detected by microdilution methods on gram-negative (Escherichia coli, Pseudomonas aeruginosa, Proteus mirabilis), gram-positive (Staphylococcus aureus, Streptococcus salivarius) bacteria and yeast (Candida albicans). The biocidal effect of composites on biofilm formation on the surface of composites was monitored by Christensen method and autoaggregation and motility tests. The biocompatibility of the composite and the leachates was assessed by 3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide (MTT) cytotoxicity assay. The evaluation of the antimicrobial effect of the leachates demonstrated that leachates of PLA composite filled with graphene oxide and Ag+ showed a stronger antimicrobial effect than leachates of PLA composite filled with vermiculite and Ag+ and Ag nanoparticles. The leachates of PLA composites containing vermiculite with HDP and HDTMA cations had a higher antimicrobial effect on G+ bacteria and yeast than G- bacteria. Bacterial growth, biofilm formation, autoaggregation and motility of the tested bacteria were most inhibited by the composite with vermiculite and Ag+ and Ag nanoparticles. Even after a 6-month degradation of this composite, bacterial growth and biofilm formation continued to be strongly inhibited up to 42 and 91%, respectively. The cytotoxic effect was proved only in the leachate of the composite with vermiculite containing HDP after 6 months of its degradation. Tests evaluating the biocompatibility of materials have shown that the vermiculite is the most preferred carrier and can be used in the future to bind other compounds. The study confirmed that PLA composite filled with vermiculite and Ag+ and Ag nanoparticles was the most stable and effective composite with the best biocompatible and biocidal properties.

Beta-lactam resistance development during the treatment processes of municipal wastewater treatment plants.

This work monitored the effect of a municipal and a village wastewater treatment plant (WWTP) technology on the fate of beta-lactam resistance genes in bacterial populations in different phases of the wastewater treatment process. In case of the municipal WWTP1, the bacteria possessing a high ampicillin resistance (minimal inhibitory concentration (MIC) values of 20 mg/mL) accumulated in the sedimentation tank, which was accompanied with a higher concentration of ampicillin in the wastewater samples (28.09 ng/L) and an increase in the relative abundance of the blaTEM gene in the bacterial population. However, an opposite trend was revealed with the blaNDM-1 gene, making the sedimentation processes of WWTP1 crucial only for the accumulation of the blaTEM gene. Similarly, the comparison with the WWTP2 showed that the accumulation of the ampicillin resistance in bacterial population probably depended on the WWTP technology and wastewater composition. Out of the four tested resistance genes (blaTEM, blaKPC, blaNDM-1, and blaOXA-48), blaTEM and blaNDM-1 genes were the only two detected in this study. According to NGS analysis of bacterial 16 S rRNA gene, Gammaproteobacteria dominated the ampicillin-resistant bacteria of the WWTP sedimentation tanks. Their relative abundance in the bacterial population also increased during the sedimentation processes in WWTP1. It could indicate the role of the bacterial taxon in ampicillin resistance accumulation in this WWTP and show that only 9.29% of the original bacterial population from the nitrification tank is involved in the documented shifts in beta-lactam resistance of the bacterial population.

Biodegradation of Reactive Orange 16 azo dye by simultaneous action of Pleurotus ostreatus and the yeast Candida zeylanoides.

The purpose was to investigate a simultaneous biodegradation of the recalcitrant monoazo dye Reactive Orange 16 (RO16) in a mixed culture consisting of a biofilm of Pleurotus ostreatus-colonizing polyamide carrier and a suspension of the yeast Candida zeylanoides to see their biological interactions and possible synergistic action during degradation. Decolorization in the mixed culture was more effective than in the fungal monoculture, the respective decolorizations reaching 87.5% and 70% on day 11. The proliferation of yeast was reduced compared with the C. zeylanoides monoculture but enabled the yeast to participate in decolorization. The interaction of P. ostreatus with the yeast resulted in a gradual decrease of fungal manganese-dependent peroxidase (MnP) and laccase activities. Gas chromatography-mass spectrometry (GC-MS) analysis of the degradation products brought evidence that P. ostreatus split the dye molecule asymmetrically to provide 4-(ethenylsulfonyl) benzene whose concentration was much decreased in the mixed culture suggesting its increased metabolization in the presence of the yeast. In contrast, C. zeylanoides split the azo bond symmetrically producing the metabolites 4-(ethenylsulfonyl) aniline and α-hydroxybenzenepropanoic acid. Those metabolites were rapidly degraded in the mixed culture. A novel aspect is represented by the evidence of a mutual cooperative action of the fungal and yeast microorganisms in the mixed culture resulting in rapid decolorization and degradation of the dye.

Sulfated Metabolites of Luteolin, Myricetin, and Ampelopsin: Chemoenzymatic Preparation and Biophysical Properties.

Authentic standards of food flavonoids are important for human metabolic studies. Their isolation from biological materials is impracticable; however, they can be prepared in vitro. Twelve sulfated metabolites of luteolin, myricetin, and ampelopsin were obtained with arylsulfotransferase from Desulfitobacterium hafniense and fully characterized by high-performance liquid chromatography, MS, and NMR. The compounds were tested for their ability to scavenge 1,1-diphenyl-2-picrylhydrazyl, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid), and N,N-dimethyl-p-phenylenediamine radicals, to reduce ferric ions and Folin-Ciocalteu reagent, and to inhibit tert-butyl hydroperoxide-induced lipid peroxidation of rat liver microsomes. The activity differed considerably even between monosulfate isomers. The parent compounds and myricetin-3'-O-sulfate were the most active while other compounds displayed significantly lower activity, particularly luteolin sulfates. No mutagenic activity of the parent compounds and their main metabolites was observed; only myricetin showed minor pro-mutagenicity. The prepared sulfated metabolites are now available as authentic standards for future in vitro and in vivo metabolic studies.

In-Depth Bioinformatic Analyses of Nidovirales Including Human SARS-CoV-2, SARS-CoV, MERS-CoV Viruses Suggest Important Roles of Non-canonical Nucleic Acid Structures in Their Lifecycles.

Non-canonical nucleic acid structures play important roles in the regulation of molecular processes. Considering the importance of the ongoing coronavirus crisis, we decided to evaluate genomes of all coronaviruses sequenced to date (stated more broadly, the order Nidovirales) to determine if they contain non-canonical nucleic acid structures. We discovered much evidence of putative G-quadruplex sites and even much more of inverted repeats (IRs) loci, which in fact are ubiquitous along the whole genomic sequence and indicate a possible mechanism for genomic RNA packaging. The most notable enrichment of IRs was found inside 5'UTR for IRs of size 12+ nucleotides, and the most notable enrichment of putative quadruplex sites (PQSs) was located before 3'UTR, inside 5'UTR, and before mRNA. This indicates crucial regulatory roles for both IRs and PQSs. Moreover, we found multiple G-quadruplex binding motifs in human proteins having potential for binding of SARS-CoV-2 RNA. Non-canonical nucleic acids structures in Nidovirales and in novel SARS-CoV-2 are therefore promising druggable structures that can be targeted and utilized in the future.

Biocompatible Polymer Materials with Antimicrobial Properties for Preparation of Stents.

Biodegradable polymers are promising materials for use in medical applications such as stents. Their properties are comparable to commercially available resistant metal and polymeric stents, which have several major problems, such as stent migration and stent clogging due to microbial biofilm. Consequently, conventional stents have to be removed operatively from the patient's body, which presents a number of complications and can also endanger the patient's life. Biodegradable stents disintegrate into basic substances that decompose in the human body, and no surgery is required. This review focuses on the specific use of stents in the human body, the problems of microbial biofilm, and possibilities of preventing microbial growth by modifying polymers with antimicrobial agents.

Antimicrobial Synergistic Effect Between Ag and Zn in Ag-ZnO·mSiO2 Silicate Composite with High Specific Surface Area.

Antimicrobial materials are widely used for inhibition of microorganisms in the environment. It has been established that bacterial growth can be restrained by silver nanoparticles. Combining these with other antimicrobial agents, such as ZnO, may increase the antimicrobial activity and the use of carrier substrate makes the material easier to handle. In the paper, we present an antimicrobial nanocomposite based on silver nanoparticles nucleated in general silicate nanostructure ZnO·mSiO2. First, we prepared the silicate fine net nanostructure ZnO·mSiO2 with zinc content up to 30 wt% by precipitation of sodium water glass in zinc acetate solution. Silver nanoparticles were then formed within the material by photoreduction of AgNO3 on photoactive ZnO. This resulted into an Ag-ZnO·mSiO2 composite with silica gel-like morphology and the specific surface area of 250 m2/g. The composite, alongside with pure AgNO3 and clear ZnO·mSiO2, were successfully tested for antimicrobial activity on both gram-positive and gram-negative bacterial strains and yeast Candida albicans. With respect to the silver content, the minimal inhibition concentration of Ag-ZnO·mSiO2 was worse than AgNO3 only for gram-negative strains. Moreover, we found a positive synergistic antimicrobial effect between Ag and Zn agents. These properties create an efficient and easily applicable antimicrobial material in the form of powder.

Effect of yeasts on biodegradation potential of immobilized cultures of white rot fungi.

The aim was to investigate the effect of yeast organisms on the degradation process by immobilized cultures of ligninolytic fungi. Immobilization was accomplished by 7-day colonization of polyamide mesh with mycelial fragments. Irpex lacteus decolorized >90% of the initial concentration of 150mgl-1 of anthraquinone Remazol Brilliant Blue R dye in three subsequent decolorization cycles and the degradation capacity was not negatively affected by the presence of 106Saccharomyces cerevisiae cells per ml in the mixed culture. The yeast was not able to degrade the dye. I. lacteus biofilm was also resistant to bacterial infection with E. coli. Inoculation of the yeast to pre-formed I. lacteus biofilm culture resulted in a reduction of fungal biomass by 27%. Levels of LiP, MnP and laccase of I. lacteus were not much influenced by S. cerevisiae or E. coli. Similar resilience of P. ostreatus biofilms was observed after exposure to yeast Issatchenkia occidentalis when the fungal degradation capacity measured with Reactive Orange 16 azo dye was maintained over two decolorization cycles. I. occidentalis did not degrade the dye under the conditions used. Formation of densely packed fungal biofilms with abundant extracellular polysaccharide was not impeded by the yeast. Increase of MnP and laccase levels attributable to the presence of I. occidentalis was observed.

Effect of bacteria on the degradation ability of Pleurotus ostreatus.

White-rot fungi are efficient degraders of lignin whose extracellular enzymes have a potential to degrade organopollutants. In natural conditions these fungi enter into interactions with other organisms, which may affect their biodegradation capacity. The aim was to investigate the ability of Pleurotus ostreatus to form stable biofilms and to test the capacity of the fungus to degrade Remazol Brilliant Blue R in mixed cultures with bacteria. Bacterial counts were determined to see the behavior of the bacterium in the mixed culture with the fungus. In axenic conditions, the homogenized fungal mycelium was able to form an active biofilm which quickly degraded the dye. The addition of Pseudomonas fluorescens or Bacillus licheniformis bacteria at 106CFU·mL-1 did not affect the decolorization rate by 7-d-old fungal biofilms where the decolorization rate reached 90%. In contrast, when fragments of the fungal mycelium were used for inoculation to pre-formed biofilm of P. fluorescens, the biofilm was allowed to develop for one week's time, no decolorization of RBBR was observed and low activities of MnP and laccase were detected. The use of agar disks covered with fungal mycelium for the inoculation to pre-formed biofilm of P. fluorescens resulted in a fully developed biofilm that decolorized RBBR with similar efficiency as the pure P. ostreatus. The difference between the agar-disk- and homogenized-mycelium inoculated fungal biofilms was corroborated by the measurement of total fungal biofilm biomass that was 6-fold lower in the latter biofilm. Capability of the fungus to overcome the competition of the bacterial biofilm thus depended on the type of fungal growth centres, where intact hyphae were superior to the fragments of mycelium. A similar effect was not observed with the biofilms of B. licheniformis where the bacterial growth was less massive. The ability of P. ostreatus biofilms to resist massive bacterial stress was demonstrated.

Reduction in the mutagenicity of synthetic dyes by successive treatment with activated sludge and the ligninolytic fungus, Irpex lacteus.

Synthetic dyes are released in wastewater from textile manufacturing plants, and many of these dyes are genotoxic. In the present study, the mutagenicity of azo, anthraquinone, and triphenyl methane dyes was investigated before and after successive biodegradation with activated sludge and the ligninolytic fungus, Irpex lacteus. Two biodegradation systems were used to reduce the genotoxicity of dyes that were not efficiently inactivated by activated sludge alone. Mutagenicity was monitored with the Salmonella reversion assay conducted with the base-pair substitution detector strains, TA100 and YG1042, and the frame-shift detector strains, TA98 and YG1041, with and without rat liver S9. All dyes except for Congo Red (CR) were mutagenic with S9 activation. Assays conducted with the dyes indicated that only the azo dye Reactive Orange 16 (RO16) was mutagenic in both TA98 and TA100. Methyl Red and Disperse Blue 3 (DB3) were mutagenic in TA98, YG1041 and YG1042, while Reactive Black 5 was mutagenic in YG1041 and YG1042. Remazol Brilliant Blue R (RBBR), Crystal violet (CV) and Bromophenol Blue (BPB) were mutagenic only in TA98, but the toxicity of the latter two dyes complicated the evaluation of their mutagenicity. CR was not mutagenic in any of the tester strains. Biodegradation studies conducted with RO16 and DB3 indicated that the two-step biodegradation process reduced the mutagenic potential of RO16 and DB3 to a greater extent than activated sludge alone; the mutagenicity of the two dyes was reduced by 95.2% and 77.8%, respectively, by the two-step process. These data indicate that the combined biodegradation process may be useful for reducing the mutagenicity associated with wastewater from textile factories that contain recalcitrant dyes.

Comparative use of bacterial, algal and protozoan tests to study toxicity of azo- and anthraquinone dyes.

Toxicity of two azo dyes (Reactive Orange 16 (RO16); Congo Red (CR)) and two anthraquinone dyes (Remazol Brilliant Blue R (RBBR); Disperse Blue 3 (DB3)) were compared using bacterium Vibrio fischeri, microalga Selenastrum capricornutum and ciliate Tetrahymena pyriformis. The following respective endpoints were involved: acute toxicity measured as bacterial luminescence inhibition, algal growth inhibition, and the effects on the protozoa including viability, growth inhibition, grazing effect and morphometric effects. In addition, mutagenicity of the dyes was determined using Ames test with bacterium Salmonella typhimurium His(-). DB3 dye was the most toxic of all dyes in the bacterial, algal and protozoan tests. In contrast to other dyes, DB3 exhibited mutagenic effects after metabolic activation in vitro in all S. typhimurium strains used. Of the methods applied, the algal test was the most sensitive to evaluate toxicity of the dyes tested.

Biodegradation and detoxification potential of rotating biological contactor (RBC) with Irpex lacteus for remediation of dye-containing wastewater.

Use of fungal organisms in rotating biological contactors (RBC) for bioremediation of liquid industrial wastes has so far been limited in spite of their significant biodegradation potential. The purpose was to investigate the power of RBC using Irpex lacteus for decolorization and detoxification of industrial dyes and dyeing textile liquors. Recalcitrant dye Methylene Blue (150 mg L(-1)) was decolorized within 70 days, its mutagenicity removed, and the biological toxicity decreased more than 10-fold. I. lacteus biofilm in the RBC completely decolorized within 26 and 47 days dyeing liquors containing disperse or reactive dyes adjusted to pH4.5 and 5-fold diluted with the growth medium, respectively. Their respective biological toxicity values were reduced 10- to 10(4)-fold in dependence of the test used. A battery of toxicity tests comprising Vibrio fisheri, Lemna minor and Sinapis alba was efficient to monitor the toxicity of textile dyes and wastewaters. Strong decolorization and detoxification power of RBC using I. lacteus biofilms was demonstrated.

The use of the fungus Dichomitus squalens for degradation in rotating biological contactor conditions.

Biodegradation potential of Dichomitus squalens in biofilm cultures and rotating biological contactor (RBC) was investigated. The fungus formed thick biofilms on inert and lignocellulosic supports and exhibited stable activities of laccase and manganese peroxidase to reach 40-62 and 25-32% decolorization of anthraquinone Remazol Brilliant Blue R and heterocyclic phthalocyanine dyes, respectively. The decolorization ceased when glucose concentration dropped to 1 mmol l(-1). In RBC reactor, respective decolorizations of Remazol Brilliant Blue R and heterocyclic Methylene Blue and Azure B dyes (50 mg l(-1)) attained 99%, 93%, and 59% within 7, 40 and 200 h. The fungus exhibited tolerance to coliform and non-coliform bacteria on rich organic media, the inhibition occurred only on media containing tryptone and NaCl. The degradation efficiency in RBC reactor, capability to decolorize a wide range of dye structures and tolerance to bacterial stress make D. squalens an organism applicable to remediation of textile wastewaters.