Fluorescence and Colorimetric Analysis of African Swine Fever Virus Based on the RPA-Assisted CRISPR/Cas12a Strategy.

It is well-established that different detection modes are necessary for corresponding applications, which can effectively reduce matrix interference and improve the detection accuracy. Here, we reported a magnetic separation method based on recombinase polymerase amplification (RPA)-assisted clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a for dual-mode analysis of African swine fever virus (ASFV) genes, including colorimetry and fluorescence. The ASFV gene was selected as the initial RPA template to generate the amplicon. The RPA amplicon was then recognized by CRISPR-associated RNA (crRNA), activating the trans-cleavage activity of Cas12a and leading to the nonspecific cleavage of ssDNA as well as a significant release of alkaline phosphatase (ALP) in the ALP-ssDNA modified magnetic bead. The released ALP can catalyze para-nitrophenyl phosphate to generate para-nitrophenol, resulting in substantial changes in absorbance and fluorescence, both of which can be used for detection with the naked eye. This strategy allows the sensitive detection of ASFV DNA, with a 20 copies/mL detection limit; no cross-reactivity with other viruses was observed. A good linear relationship was obtained in serum. In addition, this sensor displayed 100% specificity and sensitivity for clinical sample analysis. This method integrates the high sensitivity of fluorescence with easy readout of colorimetry and enables a simple, low-cost, and highly sensitive dual-mode detection of viral nucleic acid, thereby providing a broad prospect for the practical application in the diagnosis of virus infection.

Closed Cyclic DNA Machine for Sensitive Logic Operation and APE1 Detection.

DNA self-assembly has been developed as a kind of robust signal amplification strategy, but most of reported assembly pathways are programmed to amplify signal in one direction. Herein, based on mutual-activated cascade cycle of hybridization chain reaction (HCR) and catalytic hairpin assembly (CHA), a closed cycle circuit (CCC) based DNA machine is developed for sensitive logic operation and molecular recognition. Benefiting from the synergistically accelerated signal amplification, the closed cyclic DNA machine enabled the logic computing with strong and significant output signals even at weak input signals. The typical logic operations such as OR, YES, AND, INHIBIT, NOR, and NAND gate, are conveniently and clearly executed with this DNA machine through rational design of the input and computing elements. Moreover, by integrating the target recognition module with the CCC module, the proposed DNA machine is further employed in the homogeneous detection of apurinic/apyrimidinic endonuclease 1 (APE1). The precise recognition and exponential signal amplification facilitated the highly selective and sensitive detection of APE1 with limit of detection (LOD) of 7.8 × 10-5 U mL-1 . Besides, the normal cells and tumor cells are distinguished unambiguously by this method according to the detected concentration difference of cellular APE1, which indicates the robustness and practicability of this method.

Single-Particle Tracking Reveals the Interplay between HIV-1 Reverse Transcription and Uncoating.

Reverse transcription uses the reverse transcriptase enzyme to synthesize deoxyribonucleic acid (DNA) from a ribonucleic acid (RNA) template. This plays an essential role in viral replication. There are still, however, many unknown facts regarding the timing and dynamic processes involved in this life stage. Here, three types of dual-fluorescence human immunodeficiency virus type-1 (HIV-1) particles were constructed with high infectivity, and the sequential process of reverse transcription was observed by real-time imaging of a single HIV-1 particle. Viral uncoating occurred at 60-120 min post infection. Subsequently, at 120-180 min post infection, the viral genome was separated into two parts and reverse-transcribed to generate a DNA product. Nevirapine (NVP), a reverse transcriptase inhibitor, can delay the dynamic process. This study revealed a delicate, sequential, and complex relationship between uncoating and reverse transcription, which may facilitate the development of antiviral drugs.

Synthesis of Dual-Emitting CdZnSe/Mn:ZnS Quantum Dots for Sensing the pH Change in Live Cells.

Intracellular pH is an important regulator of cell function, and its subtle changes may greatly affect cell activities and cause diseases. Reliable imaging of intracellular pH remains a huge challenge. Dual-emitting Mn2+-doped quantum dots (QDs) can be directly used as a ratiometric fluorescent probe without further modification, but they displayed low performance in terms of photoluminescence, stability, and intensity ratio regulation. Here, we report intrinsic dual-emitting CdZnSe/Mn:ZnS QDs with high photoluminescence efficiency, good stability, and biocompatibility. The emission intensity ratio was selectively regulated by Mn2+ doping. Because of aggregation-induced quenching of QDs, the exciton emission of CdZnSe/Mn:ZnS QDs (471 nm) was sensitive to pH, while the Mn2+-doped emission (606 nm) was passive to pH, which was probably due to little self-quenching in Mn2+-doped emission caused by weak Mn-Mn coupling interaction. Dual-emitting CdZnSe/Mn:ZnS QDs exhibited excellent pH-responsiveness in the range of pH 4.0 to 12.0 and were used for pH imaging in live HeLa cells. When the pH value of HeLa cells changed from 5.0 to 9.0, the emission changed from red to blue. Furthermore, these dual-emitting CdZnSe/Mn:ZnS QDs can provide a versatile platform for biosensors and biological imaging.

Construction of ratiometric Si-Mn:ZnSe nanoparticles for the immunoassay of SARS-CoV-2 spike protein.

The continuing global spread of Coronavirus Disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) infection, has led to an unprecedented global health crisis. Effective and affordable methods are needed to diagnose SARS-CoV-2 infection. In this work, a ratiometric fluorescence probe, Si-Mn:ZnSe nanoparticles, was constructed through the electrostatic interaction between Si dots and Mn:ZnSe QDs, and the fluorescence of Mn:ZnSe QDs has a specifical response to H2O2. An immunocomplex was formed by the recognition of capture antibody/spike (S) protein/spike neutralizing antibody/biotinylated second antibody/streptavidin/biotinylated catalase (CAT). In the presence of S protein, CAT effectively catalyzed the decomposition of H2O2 in the system, and the fluorescence of Mn:ZnSe QDs was not specifically quenched. Based on this principle, a ratiometric immunoassay of SARS-CoV-2 S protein was established. The sensitivity of the proposed ELISA method was comparable to that of the commercial kit. In addition, this method can effectively distinguish the pseudo-SARS-CoV-2 virus and other pseudovirus. Therefore, this method provided a reliable and potential direction for diagnosing SARS-CoV-2 infection.

Novel Method of Clickable Quantum Dot Construction for Bioorthogonal Labeling.

Bioorthogonal chemistry has been considered as a powerful tool for biomolecule labeling due to its site specificity, moderate reaction conditions, high yield, and simple post-treatment. Covalent coupling is commonly used to modify quantum dots (QDs) with bioorthogonal functional group (azide or cycloalkyne), but it has a negative effect in the decrease of QDs' quantum yield and stability and increase of QDs' hydrodynamic diameter. To overcome these disadvantages, we propose a novel method for the preparation of two kinds of clickable QDs by the strong interaction of -SH with metal ions. One system involves azide-DNA-functionalized QDs, which are used for bioconjugation with dibenzocyclooctyne (DBCO)-modified glucose oxidase (GOx) to form a GOx-QDs complex. After bioconjugation, the stability of QDs was improved, and the activity of GOx was also enhanced. The GOx-QDs complex was used for rapid detection of blood glucose by spectroscopy, naked eye, and paper-based analytical devices. The second system involves DBCO-DNA-functionalized QDs, which are used for an in situ bioorthogonal labeling of HeLa cells through metabolic oligosaccharide engineering. Therefore, these clickable QDs based on DNA functionalization can be applied for rapid and effective labeling of biomolecules of interest.

Magnetic bead-enzyme assemble for triple-parameter telomerase detection at single-cell level.

In this work, we developed a triple-parameter strategy for the detection of telomerase activity from cancer cells and urine samples. This strategy was developed based on magnetic bead-enzyme hybrids combined with fluorescence analysis, colorimetric assay, or adenosine triphosphate (ATP) meter as readout. The application of magnetic bead-enzyme hybrids has the advantages of magnetic separation and signal amplification. These detection methods can be used individually or in combination to achieve the optimal sensing performance and make the results more convincing. Among them, the ATP meter with portable size had easy operation and low cost, and this response strategy provided a higher sensitivity at the single-cell level. The designed strategy was suitable as naked-eye sensor and point-of-care testing (POCT) for rapid assaying of telomerase activity. Graphical abstract Magnetic bead-enzyme assemble for triple-parameter telomerase detection.

Quantum Dot Nanobeacons for Single RNA Labeling and Imaging.

Detection and imaging RNAs in live cells is in high demand. Methodology for such a purpose is still a challenge, particularly for single RNA detection and imaging in live cells. In this study, a type of quantum dot (QD) nanobeacon with controllable valencies was constructed by precisely conjugating the black hole quencher (BHQ1) and phosphorothioate comodified DNA onto CdTe:Zn2+ QDs via a one-pot hydrothermal method. The nanobeacon with only one conjugated DNA was used to label and detect low-abundance nucleic acids in live cells, and single HIV-1 RNAs were detected and imaged in live HIV-1 integrated cells. Additionally, QD nanobeacon-labeled HIV-1 genomic RNAs were encapsulated in progeny viral particles, which can be used to track the uncoating process of single viruses. The current study provides a platform for nucleic acid labeling and imaging with high sensitivity, being especially meaningful for tracking of individual RNAs in live cells.

Target-Induced Cascade Amplification for Homogeneous Virus Detection.

Detection of viruses with high sensitivity is critical for the prevention and treatment of the related disease. Two homogeneous target-induced cascade amplification methods were proposed for the detection of enterovirus 71 and coxsackievirus B3. These methods both employ DNAzyme but differ in the way in which the DNAzyme is amplified. In the hybridization chain reaction (HCR)-based strategy, the DNAzyme is assembled by hairpin DNA strands, while in the rolling circle amplification (RCA)-based strategy, the DNAzyme is synthesized by the polymerase. On the basis of the virion structure, we investigated the effects of using only VP1-antibody or VP1-antibody and VP2-antibody on the detection. And the combination of two kinds of antibodies was found to further improve the performance of the detection. Subsequently, the simultaneous detection of EV71 and CVB3 was achieved by the RCA-based strategy. And the proposed methods were also applied in clinical samples analysis with a satisfactory result, showing great potential for applications in virus detection.

A fluorometric turn-on aptasensor for mucin 1 based on signal amplification via a hybridization chain reaction and the interaction between a luminescent ruthenium(II) complex and CdZnTeS quantum dots.

A fluorometric method is described for the determination of the tumor biomarker mucin 1 (MUC1). It is based on signal amplification of the hybridization chain reaction (HCR), and the interaction between a luminescent ruthenium(II) complex and CdZnTeS quantum dots (QDs). If MUC1 bind to the biotin-labeled aptamer, it will initiate HCR with hairpins H1 and H2 to form a long-range dsDNA. The long nucleic acid chains are then linked on the surface of streptavidin-modified magnetic microparticles (MMPs) through streptavidin-biotin interaction. The luminescent ruthenium(II) complex is then embedded in the long dsDNA linked to the MMPs. Hence, there is little Ru complex in the supernatant after magnetic separation, and the fluorescence of the CdZnTeS QDs (best measured at excitation/emission wavelengths of 350/530 nm) is only slightly quenched. In the absence of target, the fluorescence of the CdZnTeS QDs is strongly quenched. Fluorescence increases linearly in the 0.2-100 ng·mL-1 MUC1 concentration range, and the LOD is 0.13 ng·mL-1 (at S/N = 3). The method was applied to the determination of MUC1 in spiked human serum samples. Graphical abstract A fluorometric turn-on aptasensor for mucin 1 is described that is based on the interaction between a Ru(II) complex and quantum dots (QDs). The detection system includes biotin-labeled aptamer-H0, hairpins H1 and H2, streptavidin-modified magnetic microparticles (MMPs), Ru(bpy)2(dppx)2+ and CdZnTeS QDs.

Rox-DNA Functionalized Silicon Nanodots for Ratiometric Detection of Mercury Ions in Live Cells.

A ratiometric fluorescent sensor for mercury ions (Hg2+) has been constructed via covalent functionalization of silicon nanodot (SiND) with Hg2+-specific 6-carboxy-X-rhodamine (Rox)-tagged DNA. For the Rox-DNA functionalized SiND, the red fluorescence of Rox can be quenched by the blue-emitting SiND in the presence of Hg2+ due to structural change in DNA, which serves as the response signal. Meawhile, the fluorescence of SiND is insensitive to Hg2+ and acts as the reference signal. The wavelength difference in the optimal emission peak is as large as 190 nm between SiND (422 nm) and Rox (612 nm), which can efficaciously exclude the interference of the two emission peaks, and facilitates dual-color visualization of Hg2+ ions. The biofunctionalization of SiND improves the acid-base stability of SiND significantly, which is favorable for its application in the intracellular environment. Accordingly, a sensitive, simple, precise and rapid method for tracing Hg2+ was proposed. The limit of detection and precision of this method for Hg2+ was 9.2 nM and 8.8% (50 nM, n = 7), respectively. The increase of Hg2+ concentration in the range of 10-1500 nM was in accordance with linearly increase of the I422/ I612 ratio. As for practical application, the recoveries in spiked human urine and serum samples were in the range of 81-107%. Moreover, this fluorescent nanosensor was utilized to the ratiometric detection of Hg2+ in HeLa cells.

Simple construction of ratiometric fluorescent probe for the detection of dopamine and tyrosinase by the naked eye.

In this work, a simple and novel ratiometric fluorescence method based on ROX-DNA-functionalized CdZnTeS quantum dots (QDs) was developed for the detection of dopamine (DA) and tyrosinase (TYR). A ratiometric fluorescent probe was constructed by binding phosphorothioate DNA to the metal ions of QDs, which is a modification-free and low-cost method. DA was easily oxidized to DA quinone under the catalysis of TYR by dissolved O2, which effectively quenched the fluorescence of the QDs. Strong linear correlations were achieved for TYR in the range of 10.0-100.0 ng mL-1 and for DA in the range of 10.0-1000.0 nM. The limit of detection was estimated to be as low as 1.05 ng mL-1 for TYR and 1.93 nM for DA. Moreover, various colors were displayed in the course of detection, which could be observed by the naked eye. Therefore, an on-site and sensitive fluorescence method for the visual detection of DA and TYR can be developed. In addition, the findings revealed the potential applicability of the ratiometric fluorescent probe for the detection of DA and TYR in human serum. This ratiometric fluorescence method is not only sensitive and selective but also rapid and convenient for the detection of the analytes without sophisticated instrumentation.

Fluorescence turn-on detection of target sequence DNA based on silicon nanodot-mediated quenching.

We have developed a new enzyme-free method for target sequence DNA detection based on the dynamic quenching of fluorescent silicon nanodots (SiNDs) toward Cy5-tagged DNA probe. Fascinatingly, the water-soluble SiNDs can quench the fluorescence of cyanine (Cy5) in Cy5-tagged DNA probe in homogeneous solution, and the fluorescence of Cy5-tagged DNA probe can be restored in the presence of target sequence DNA (the synthetic target miRNA-27a). Based on this phenomenon, a SiND-featured fluorescent sensor has been constructed for "turn-on" detection of the synthetic target miRNA-27a for the first time. This newly developed approach possesses the merits of low cost, simple design, and convenient operation since no enzymatic reaction, toxic reagents, or separation procedures are involved. The established method achieves a detection limit of 0.16 nM, and the relative standard deviation of this method is 9% (1 nM, n = 5). The linear range is 0.5-20 nM, and the recoveries in spiked human fluids are in the range of 90-122%. This protocol provides a new tactic in the development of the nonenzymic miRNA biosensors and opens a promising avenue for early diagnosis of miRNA-associated disease. Graphical abstract The SiND-based fluorescent sensor for detection of S-miR-27a.

One-Step Synthesis of Rox-DNA Functionalized CdZnTeS Quantum Dots for the Visual Detection of Hydrogen Peroxide and Blood Glucose.

As the blood glucose concentration is an important clinical parameter of diabetes, the rapid and effective detection of blood glucose is very significant for monitoring and managing diabetes. Here, a facile method to prepare Rox-DNA functionalized CdZnTeS quantum dots (QDs) was developed. The Rox-DNA functionalized CdZnTeS QDs were prepared by a one-pot hydrothermal method through phosphorothioate DNA bound to QDs, which were employed as a ratiometric fluorescent probe for the rapid and sensitive detection of H2O2 and glucose. Compared with the traditional multistep construction of ratiometric fluorescent probes, this presented approach is simpler and more effective without chemical modification and complicated separation. The CdZnTeS QDs with green fluorescence is specifically sensitive to H2O2, while the red fluorescence of Rox is invariable. H2O2 is the product from the oxidation of glucose catalyzed by glucose oxidase (GOx). Therefore, a facile method to detect H2O2 and glucose with a detection limit of 0.075 µM for H2O2 and 0.042 µM for glucose was developed. In addition, this proposed probe has been employed for the detection of glucose in human serum with a satisfactory result. Moreover, this probe has been used for visual detection, and the health and diabetics can be distinguished by the naked eye. Meanwhile, this nanoprobe is also generalizable and can be extended to the detection of many other H2O2-mediated analytes.

Design and Application of Biosafe Coronavirus Engineering Systems without Virulence.

In the last twenty years, three deadly zoonotic coronaviruses (CoVs)-namely, severe acute respiratory syndrome coronavirus (SARS-CoV), Middle East respiratory syndrome coronavirus (MERS-CoV), and SARS-CoV-2-have emerged. They are considered highly pathogenic for humans, particularly SARS-CoV-2, which caused the 2019 CoV disease pandemic (COVID-19), endangering the lives and health of people globally and causing unpredictable economic losses. Experiments on wild-type viruses require biosafety level 3 or 4 laboratories (BSL-3 or BSL-4), which significantly hinders basic virological research. Therefore, the development of various biosafe CoV systems without virulence is urgently needed to meet the requirements of different research fields, such as antiviral and vaccine evaluation. This review aimed to comprehensively summarize the biosafety of CoV engineering systems. These systems combine virological foundations with synthetic genomics techniques, enabling the development of efficient tools for attenuated or non-virulent vaccines, the screening of antiviral drugs, and the investigation of the pathogenic mechanisms of novel microorganisms.

Programmable Aptasensor for Regulating CRISPR/Cas12a Activity.

CRISPR-mediated aptasensors have gained prevalence for detecting non-nucleic acid targets. However, there is an urgent need to develop an easily customizable design to improve the signal-to-noise ratio, enhance universality, and expand the detection range. In this article, we report a CRISPR-mediated programmable aptasensor (CPAS) platform. The platform includes single-stranded DNA comprising the aptamer sequence, locker DNA, and a crRNA recognition region, forming a hairpin structure through complementary hybridization. With T4 DNA polymerase, the crRNA recognition region was transformed into a complete double-stranded DNA through stem-loop extension, thereby activating the trans-cleavage activity of Cas 12a and generating fluorescence signals. The specific binding between the target molecule and aptamer disrupted the formation of the hairpin structure, altering the fluorescence signals. Notably, the CPAS platform allows for easy customization by simply changing the aptamer sequence and locker DNA, without entailing adjustments to the crRNA. The optimal number of bases in the locker DNA was determined to be seven nucleotides for the SARS-CoV-2 spike (S) protein and four nucleotides for ATP. The CPAS platform exhibited high sensitivity for S protein and ATP detection. Integration with a lateral flow assay enabled sensitive detection within 1 h, revealing its excellent potential for portable analysis.

Analyte-induced hindrance in the RCA-assisted CRISPR/Cas12a system for homogeneous protein assays.

Heterogeneous assays, such as enzyme-linked immunosorbent assays, have become indispensable for in vitro diagnostics. However, the simple, sensitive, and accurate detection is limited by their multiple washing and incubation steps, and limited amplification methods. In this study, we design a novel approach utilizing analyte-induced hindrance within the rolling circle amplification (RCA)-assisted CRISPR/Cas12a system for simple and highly sensitive homogenous protein detection. Streptavidin (SA) and digoxin antibody (anti-Dig) are employed as representative detection models. The specific recognition of target proteins using primers modified with small molecules hinders the RCA process, preventing the activation of Cas12a's trans-cleavage activity, thereby leading to a reduction in fluorescence intensity. Our developed platform exhibites exceptional detection performance characterized by high sensitivity, robust specificity, and significant potential for application in complex samples. By expanding the recognition elements, this platform can evolve into a versatile clinical diagnostic tool with universal applicability. In addition, this platform provides a novel direction for quantifying ultralow-concentration disease biomarkers in clinical practice.

Ultra-Sensitive Detection of the SARS-CoV-2 Nucleocapsid Protein via a Clustered Regularly Interspaced Short Palindromic Repeat/Cas12a-Mediated Immunoassay.

Tracking trace protein analytes in precision diagnostics is an ongoing challenge. Here, we developed an ultrasensitive detection method for the detection of SARS-CoV-2 nucleocapsid (N) protein by combining enzyme-linked immunosorbent assay (ELISA) with the clustered regularly interspaced short palindromic repeat/CRISPR-associated protein (CRISPR/Cas) system. First, the SARS-CoV-2 N protein bound by the capture antibody adsorbed on the well plate was sequentially coupled with the primary antibody, biotinylated secondary antibody, and streptavidin (SA), followed by biotin primer binding to SA. Subsequently, rolling circle amplification was initiated to generate ssDNA strands, which were targeted by CRISPR/Cas12a to cleave the FAM-ssDNA-BHQ1 probe in trans to generate fluorescence signals. We observed a linear relationship between fluorescence intensity and the logarithm of N protein concentration ranging from 3 fg/mL to 3 × 107 fg/mL. The limit of detection (LOD) was 1 fg/mL, with approximately nine molecules in 1 µL of the sample. This detection sensitivity was 4 orders magnitude higher than that of commercially available ELISA kits (LOD: 5.7 × 104 fg/mL). This method was highly specific and sensitive and could accurately detect SARS-CoV-2 pseudovirus and clinical samples, providing a new approach for ultrasensitive immunoassay of protein biomarkers.

Label-free and low-background FEN1 sensing based on cleavage-induced ligation of bifunctional dumbbell DNA and in-situ signal readout.

Flap endonuclease 1 (FEN1) is overexpressed in various types of human tumor cells and has been recognized as a promising biomarker for cancer diagnosis in recent years. In this work, a label-free fluorescent nanosensor for FEN1 detection was developed based on cleavage-induced ligation of bifunctional dumbbell DNA and in-situ signal readout by copper nanoparticles (CuNPs). The dumbbell DNA was rationally designed with a FEN1 cleavable 5' flap for target recognition and AT-riched stem-loop template for CuNPs formation. In the presence of FEN1, 5' overhanging DNA flap of dumbbell DNA was effectively removed to form a linkable nick site. After the ligation by T4 DNA ligase, the dumbbell DNA changed to exonuclease-resisted closed structure which enabled in-situ generation of fluorescent CuNPs that served as signal source for target quantification. The low background attributed to synergic digestion by exonucleases facilitated the highly sensitive detection of FEN1 with limit of detection of 0.007 U/mL. Additionally, the sensor was extended to the assay of FEN1 inhibitor (aurintricarboxylic acid) with reasonable results. Last but not least, the normal cells and tumor cells were distinguished unambiguously by this sensor according to the detected concentration difference of cellular FEN1, which indicates the robustness and practicability of this nanosensor.

Development of dual-mode ELISA based on ALP-catalyzed APP hydrolysis for IL-6 detection.

Sensitive and accurate detection of interleukin 6 (IL-6) is crucial for the early diagnosis of cerebral infarction to improve patient survival rates. However, the low-abundance of IL-6 in cerebral infarction presents a significant challenge in developing effective diagnosis method. Herein, we studied and analyzed the strong fluorescence property of 4-aminophenol phosphate (APP) and developed an enzyme-linked immunosorbent assay (ELISA) for IL-6 detection. The detection was based on the integration of optical signal change induced by alkaline phosphatase (ALP)-catalyzed APP hydrolysis and ALP-mediated ELISA. The generated colorimetric signal of 4-aminophenol, APP hydrolysis product, was used for ELISA of IL-6 with a detection limit of 0.1 ng/mL, and the visual detection of IL-6 was achieved. The changes in APP fluorescence have a good linear relationship with the logarithm of IL-6 concentration in the range of 0.005 ng/mL to 5.0 ng/mL, with a detection limit of 0.001 ng/mL, which was 100 times lower than that of conventional pNPP-based ELISA. Furthermore, the constructed ELISA effectively distinguished between samples from patients with cerebral infarction and volunteers with non-cerebral infarction, and the severity of symptoms was well distinguished based on IL-6 measurement. The dual-mode ELISA demonstrated high feasibility of low-abundance biomarker detection and displayed good potential for accurate in vitro diagnosis.