Task-oriented exercises improve disability of working patients with surgically-treated proximal humeral fractures. A randomized controlled trial with one-year follow-up.

BACKGROUND: General physiotherapy is a common means of rehabilitation after surgery for proximal humeral fracture (PHF). Better-targeted exercises seem worthy of investigation and the aim of this study was to assess the efficacy of a rehabilitation program including task-oriented exercises in improving disability, pain, and quality of life in patients after a PHF. METHODS: By means of a randomized controlled trial with one-year follow-up, 70 working patients (mean age of 49 ± 11 years; 41 females), who were selected for open reduction and internal fixation with plates caused by PHF, were randomized to be included in an experimental (n = 35) or control group (n = 35). There was a permuted-block randomization plan, and a list of program codes was previously created; subsequently, an automatic assignment system was used to conceal the allocation. The first group underwent a supervised rehabilitation program of task-oriented exercises based on patients' specific job activities, and occupational therapy. The second group underwent general physiotherapy, including supervised mobility, strengthening and stretching exercises. Both groups individually followed programs of 60-min session three times per week for 12 weeks in the outpatient setting. The Disability Arm Shoulder Hand questionnaire (DASH; scores range from 0 to 100; primary outcome), a Pain intensity Numerical Rating Scale (scores range 0 to 10; secondary outcomes), and the Short-Form Health Survey (scores range from 0 to 100; secondary outcomes) assessed the interventions. Participants were evaluated before surgery, before and after rehabilitation (primary endpoint), and at the one-year follow-up (secondary endpoint). A linear mixed model analysis for repeated measures was carried out for each outcome measure (p < 0.05). RESULTS: Time, group and time by group showed significant effects for all outcome measures in favour of the experimental group. The DASH and the DASH work achieved clinically important between-group differences of 16.0 points (95% confidence interval [C.I.] 7.3 to 24.7) and 19.7 (95% C.I. 9.0 to 30.5) at follow-up, respectively. The NRS achieved a between-group difference of 2.9 (95% C.I. 1.0 to 3.9) at follow-up. As for SF-36, there were between-group differences ranging from 17.9 to 37.0 at follow-up. CONCLUSIONS: A rehabilitation program based on task-oriented exercises was useful in improving disability, pain, and quality of life in working patients after PHFs. Improvements lasted for at least 12 months. TRIAL REGISTRATION: On 16/12/2019, the trial was retrospectively registered in the ISRCTN registry with the ID number 17996552 .

Reliability and reproducibility of the new AO/OTA 2018 classification system for proximal humeral fractures: a comparison of three different classification systems.

BACKGROUND: The classification systems for proximal humeral fractures routinely used in clinical practice include the Neer and Arbeitsgemeinschaft für Osteosynthesefragen/Orthopaedic Trauma Association (AO/OTA) 2007 systems. Currently used systems have low inter- and intraobserver reliability. In 2018, AO/OTA introduced a new classification system with the aim of simplifying the coding process, in which the Neer four-part classification was integrated into the fracture description. The aim of the present work is to assess the inter- and intraobserver agreement of the new AO/OTA 2018 compared with the Neer and AO/OTA 2007 classifications. MATERIALS AND METHODS: A total of 116 radiographs of consecutive patients with proximal humeral fracture were selected and classified by three observers with different levels of experience. All three observers independently reviewed and classified the images according to the Neer, AO/OTA 2007, and new AO/OTA 2018 systems. To determine the intraobserver agreement, the observers reviewed the same set of radiographs after an interval of 8 weeks. The inter- and intraobserver agreement were determined through Cohen's kappa coefficient analysis. RESULTS: The new AO/OTA 2018 classification showed substantial mean inter- (k = 0.67) and intraobserver (k = 0.75) agreement. These results are similar to the reliability observed for the Neer classification (interobserver, k = 0.67; intraobserver, k = 0.85) but better than those found for the AO/OTA 2007 system, which showed only moderate inter- (k = 0.57) and intraobserver (k = 0.58) agreement. The two more experienced observers showed better overall agreement, but no statistically significant difference was found. No differences were found between surgical experience and agreement regarding specific fracture types or groups. CONCLUSIONS: The results showed that the Neer system still represents the more reliable and reproducible classification. However, the new AO/OTA 2018 classification improved the agreement among observers compared with the AO/OTA 2007 system, while still maintaining substantial descriptive power and simplifying the coding process. The universal modifiers and qualifications, despite their possible complexity, allowed a more comprehensive fracture definition without negatively affecting the reliability or reproducibility of the classification system. LEVEL OF EVIDENCE: Level III, diagnostic studies.

Short stem total hip arthroplasty for osteonecrosis of the femoral head in patients 60 years or younger: a 3- to 10-year follow-up study.

BACKGROUND: In young patients with osteonecrosis of the femoral head (ONFH), short-stem total hip arthroplasty (THA) could allow a potential advantage in preserving metaphyseal bone-stock, when revision surgery might become necessary. However, only a few studies have evaluated the outcome of short-stem THAs in ONFH. We reviewed the prospectively collected data of a cementless partial neck-retaining short-stem with ceramic-on-ceramic bearings in ONFH patients. METHODS: Thirty patients (37 hips) younger than 60 years (mean age at surgery, 51.5 years) underwent THA with the NANOS® stem (Smith and Nephew, Marl, Germany) from January 2006 to December 2012. All patients received a 32-mm or 36 mm ceramic femoral head. Harris hip score, WOMAC and UCLA activity score were recorded. Postoperative radiographs were evaluated for bone-implant fixation and osteolysis. Further analysis correlated clinical findings with implants characteristics and patient demographics at mean 5.6 years' follow-up (range, 3-10 years). RESULTS: The clinical and functional results improved significantly (p < 0.001). At latest follow-up, mean HHS, WOMAC, and UCLA activity scores were 90 (range, 71-100), 94 (range, 76-100), and 6.3 (range, 4-10) points, respectively. The diameter of the femoral head did not influence the clinical outcome (p = 0.661). All hips showed bone ingrowth fixation of the acetabular and femoral components. No patients showed osteolysis. No revision for any reason was performed during the study period. CONCLUSIONS: The excellent clinical results and fixation pattern at mean 5.6 years' follow-up reveal this implant as a reliable option in advanced stage of ONFH either. Further investigations are crucial to determine the long-term durability and to assess whether the association of ceramic-on-ceramic bearings, can be useful to achieve longer survivorship and lower complications rates. TRIAL REGISTRATION: Registry number: ISRCTN 91336248 ; date of registration: 04/07/2017.

Periprosthetic fractures: epidemiology and current treatment.

Periprosthetic fractures are becoming increasingly frequent due to aging population and growing number of total joint replacements involving joints different from hip and knee, such as shoulder and elbow. The treatment of these fractures still represents one of the major challenges for the orthopedic surgeon. Despite all efforts to understand and treat these patients, high rate of failure and mortality are still reported. In this review, the epidemiology of periprosthetic fractures, risk factors and results of surgical treatment are disclosed. Moreover, we propose a treatment algorithm based on the findings of the New Unified Classification System.

Atypical periprosthetic acetabular fracture in long-term alendronate therapy.

Bisphosphonates have been commonly used in the treatment of osteoporosis, demonstrating its efficacy in fracture risk reduction. However, even if are generally safe and well tolerated, concerns have emerged about atypical fractures related to its prolonged use. Although atypical femoral fracture are more common, case reports demonstrated that even other skeletal areas can be involved by unusual pattern of fracture. We report a atypical acetabular periprosthetic fracture in a 83-year-old female patient after prolonged alendronate treatment for osteoporosis and isolated acetabular revision surgery. The patient underwent to clinical, bioumoral and radiological evaluation and all the history cases were fully reported. We believe this periprosthetic fracture, according to the available data, may have similar underlying pathology to atypical femoral fractures. Awareness of symptoms, in addition to a regular radiographic survey may facilitate early diagnosis and possible prevention of spontaneous periprosthetic fractures, in patients receiving bisphosphonate therapy beyond 5 years. The treatment of this atypical periprosthetic fracture should include both surgical than pharmacological therapy to obtained bone healing.

Quantitative Assessment of Acetabular Defects in Revision Hip Arthroplasty Based on 3D Modeling: The Area Increase Ratio (AIR) Method.

The most common classifications for acetabular bone defects are based on radiographic two-dimensional imaging, with low reliability and reproducibility. With the rise of modern processing techniques based on 3D modelling, methodologies for the volumetric quantification of acetabular bone loss are available. Our study aims to describe a new methodology for the quantitative assessment of acetabular defects based on 3D modelling, focused on surface analysis of the integrity of the main anatomical structures of the acetabulum represented by four corresponding sectors (posterior, superior, anterior, and medial). The defect entity is measured as the area increase ratio (AIR) detected in all the sectors analyzed on three planes of view (frontal, sagittal, and axial) compared to healthy hemipelvises. The analysis was performed on 3D models from the CT-scan of six exemplary specimens with a unilateral pathological hemipelvis. The AIR between the native and the pathological hemipelvis was calculated for each sector, for a total of 48 analyses (range, +0.93-+171.35%). An AIR of >50% were found in 22/48 (45.8%) sectors and affected mostly the posterior, medial, and superior sectors (20/22, 90.9%). Qualitative analysis showed consistency between the data and the morphological features of the defects. Further studies with larger samples are needed to validate the methodology and potentially develop a new classification scheme.

Proximal femoral defect classifications in revision total hip arthroplasty from X-rays imaging to advanced 3D imaging: a narrative review.

Background and Objective: Femoral bone defect in hip arthroplasty revision surgery represents a complex problem, and the treatment is a challenge for orthopedic surgeons called to assess the residual bone stock in an altered anatomy and obtain stability for the new implant. Classification systems available are mostly based on X-rays two-dimensional images and lack of accuracy and reproducibility and comprehensive therapeutic algorithms. However, there is no record of any classification based on computed tomography (CT)-scan images or three-dimensional (3D) modeling modern techniques. We aimed to review the current literature around femoral defect classifications (FDCs) analyzing their different rationale basis, reliability and accuracy, and their benefit in clinical practice. Moreover, we highlighted the role of CT scan-based 3D modeling techniques in the setting of femoral bone defects and revision hip arthroplasty. Methods: A narrative review was conducted. The articles were selected from the PubMed and Scopus medical database updated to March 2023. All Level-I to IV studies in the English language were considered for inclusion. The research was performed using relevant search term items: "femoral defects", "classification", "radiographic", "revision hip arthroplasty", "CT scan" and "3D" and we included only articles that evaluated the accuracy or reliability (or both) of the different femoral bone defects classification system. Key Content and Findings: Our search yielded 408 results, of which 17 were deemed highly relevant. We found seven X-ray-based classification systems which have been attempted to quantify the degree of bone loss with low to good reproducibility. The most used classification system for femoral bone defects were the AAOS and Paprosky classification, which also offers a clinical therapeutic algorithm. In 2021, the FDC interestingly showed a new simple classification system with sub-optimal reproducibility and a practical therapeutic algorithm. Despite the numerous classification system of femoral defects, none of them comprehends the use of CT scan and 3D imaging technologies. Conclusions: Traditional X-rays-based classification system are still widely used event if their intra-observer and inter-observer reliability is sub-optimal. 3D modeling techniques represent an important diagnostic tool that could improve the understanding of bone defects and residual bone supportive structures, allowing to elaborate new, more precise, classification systems.

Total knee arthroplasty after anterior cruciate ligament reconstruction: a narrative review.

Background and Objective: Knee replacement following anterior cruciate ligament (ACL) reconstruction can be demanding due to altered anatomy, soft tissue scars, bone loss, extensor mechanism complications, and knee instability. This narrative review summarizes the strategies and approaches to managing operative challenges in total knee arthroplasty (TKA) following ACL reconstruction. Methods: Studies reporting outcomes of patients who underwent TKA after ACL reconstruction were retrieved and assessed to be included in this review that synthesizes the available evidence highlighting the pitfalls encountered during surgery, the intraoperative challenges posed by ligament balancing and exposure, and the leading role of modular and retained implants. Key Content and Findings: TKA following ACL reconstruction has a high rate of intra-operative complications such as instability, bone loss, difficult exposure and demanding soft tissue balancing, representing a revision surgery rather than routine primary knee arthroplasty and a revision-oriented skill set and modular components are recommended to significantly optimize both surgical strategy and patient outcomes. With a rising incidence of ACL injuries and growing reconstructions, anticipating an increase in TKA procedures, this review aims to provide a call for rethinking clinical approaches to ensure effective and patient-centric care. Conclusions: This narrative review seems to indicate that TKA after ACL reconstruction should be considered as revision surgery and modular components should be used. However, future prospective and high-quality studies are required to better clarify risk factors and give strong recommendations for this complex surgery.

Segmental Mandibulectomy and Mandibular Reconstruction with Fibula-Free Flap Using a 3D Template.

INTRODUCTION: The present study evaluates the influence of virtual surgical planning with a preoperative 3D resin model on aesthetic and functional outcomes in patients treated by segmental mandibulectomy and reconstruction with fibula-free flap for oral cancer. METHODS: All consecutive patients who underwent segmental mandibulectomy and mandibular reconstruction with a fibula-free flap using a 3D template at our department from January 2021 to January 2023 were included in the study. "Patients control" were patients treated by reconstruction with a fibula-free flap without using a 3D template. Three-dimensional modeling was performed by converting from preoperative computed tomography to a stereolithography format to obtain the resin 3D models. Qualitative analysis of anatomical and aesthetic results consisted of the evaluation of the patients' aesthetic and functional satisfaction and the symmetry of the mandibular contour observed at clinical examination. Quantitative analysis was based on the assessment of the accuracy and precision of the reconstruction by comparing preoperative and postoperative computed tomograms as objective indicators. RESULTS: Seven patients (five males and two females, mean age of 65.1 years) were included in the study. All patients showed a symmetric mandibular contour based on the clinical examination. After recovery, six patients (85.7%) considered themselves aesthetically satisfied. The quantitative analysis (assessed in six/seven patients) showed that the mean difference between preoperative and postoperative intercondylar distance, intergonial angle distance, anteroposterior dimension, and gonial angle improved in the 3D template-assisted group. CONCLUSION: The 3D-printed template for mandibular reconstruction with microvascular fibula-free flap can improve aesthetic outcomes in comparison with standard approaches.