Novel Carbon-Encapsulated Porous SnO2 Anode for Lithium-Ion Batteries with Much Improved Cyclic Stability.

Porous SnO2 submicrocubes (SMCs) are synthesized by annealing and HNO3 etching of CoSn(OH)6 SMCs. Bare SnO2 SMCs, as well as bare commercial SnO2 nanoparticles (NPs), show very high initial discharge capacity when used as anode material for lithium-ion batteries. However, during the following cycles most of the Li ions previously inserted cannot be extracted, resulting in considerable irreversibility. Porous SnO2 cubes have been proven to possess better electrochemical performance than the dense nanoparticles. After being encapsulated by carbon shell, the obtained yolk-shell SnO2 SMCs@C exhibits significantly enhanced reversibility for lithium-ions storage. The reversibility of the conversion between SnO2 and Sn, which is largely responsible for the enhanced capacity, has been discussed. The porous SnO2 SMCs@C shows much increased capacity and cycling stability, demonstrating that the porous SnO2 core is essential for better lithium-ion storage performance. The strategy introduced in this paper can be used as a versatile way to fabrication of various metal-oxide-based composites.

Interphases, Interfaces, and Surfaces of Active Materials in Rechargeable Batteries and Perovskite Solar Cells.

The ever-increasing demand for clean sustainable energy has driven tremendous worldwide investment in the design and exploration of new active materials for energy conversion and energy-storage devices. Tailoring the surfaces of and interfaces between different materials is one of the surest and best studied paths to enable high-energy-density batteries and high-efficiency solar cells. Metal-halide perovskite solar cells (PSCs) are one of the most promising photovoltaic materials due to their unprecedented development, with their record power conversion efficiency (PCE) rocketing beyond 25% in less than 10 years. Such progress is achieved largely through the control of crystallinity and surface/interface defects. Rechargeable batteries (RBs) reversibly convert electrical and chemical potential energy through redox reactions at the interfaces between the electrodes and electrolyte. The (electro)chemical and optoelectronic compatibility between active components are essential design considerations to optimize power conversion and energy storage performance. A focused discussion and critical analysis on the formation and functions of the interfaces and interphases of the active materials in these devices is provided, and prospective strategies used to overcome current challenges are described. These strategies revolve around manipulating the chemical compositions, defects, stability, and passivation of the various interfaces of RBs and PSCs.

Sensitive capillary chromatography mass spectrometric methods for the determination of salcatonin in human biological matrices.

New methods employing capillary liquid chromatography in combination with time-of-flight mass spectrometry (microLC-TOF/MS) were developed for the rapid determination of salcatonin in human urine and plasma. The present approaches utilize (13)C(6)-leucine (19)-labeled salcatonin as internal standard, small matrix volumes and simple sample preparation procedures. They allow TOF/MS to be used as a highly selective detector for providing accurate quantitation of salcatonin. Data acquisition was performed in enhanced mode optimizing the signal for the triply charged species of salcatonin and its internal standard. We demonstrate that the determination of salcatonin is straightforward and reliable and can be performed with excellent linearity (R(2)>0.999), precision and accuracy over the concentration ranges of 2.9-290 pmol/mL in human urine, and 7.3-730 pmol/mL in human plasma.

Validation of a sensitive and automated 96-well solid-phase extraction liquid chromatography-tandem mass spectrometry method for the determination of desloratadine and 3-hydroxydesloratadine in human plasma.

To support clinical development, a liquid chromatographic-tandem mass spectrometric (LC-MS-MS) method was developed and validated for the determination of desloratadine (descarboethoxyloratadine) and 3-OH desloratadine (3-hydroxydescarboethoxyloratadine) concentrations in human plasma. The method consisted of automated 96-well solid-phase extraction for sample preparation and liquid chromatography/turbo ionspray tandem mass spectrometry for analysis. [2H(4)]Desloratadine and [2H(4)]3-OH desloratadine were used as internal standards (I.S.). A quadratic regression (weighted 1/concentration(2)) gave the best fit for calibration curves over the concentration range of 25-10000 pg/ml for both desloratadine and 3-OH desloratadine. There was no interference from endogenous components in the blank plasma tested. The accuracy (%bias) at the lower limit of quantitation (LLOQ) was -12.8 and +3.4% for desloratadine and 3-OH desloratadine, respectively. The precision (%CV) for samples at the LLOQ was 15.1 and 10.9% for desloratadine and 3-OH desloratadine, respectively. For quality control samples at 75, 1000 and 7500 pg/ml, the between run %CV was

Substance P and neurotensin are up-regulated in the lumbar spinal cord of animals with neuropathic pain.

Many neuropeptides have been shown to be up-regulated in response to pain. The purpose of this study was to identify pain-related peptides in a rat model of neuropathic pain induced by sciatic nerve cuff implantation. Rats were tested for touch sensitivity prior to and 7 days following cuff implantation or sham surgeries. The lumbar spinal cord was removed on the 8th day post-surgery and the lumbar enlargement was processed for the detection of selected peptides using time-of-flight mass spectrometry. Only substance P (MW 1346.74) and neurotensin (MW 1673.0) were detected in the lumbar spinal cord of animals with mechanical allodynia (P < 0.01) following innocuous tactile stimulation of the affected hind paw. Therefore, substance P and neurotensin may be target candidates for the understanding and treatment of neuropathic pain.

Formation of interfacial layer and long-term cyclability of Li-O2 batteries.

The long-term operation of Li-O2 batteries under full discharge/charge conditions is investigated in a glyme-based electrolyte. The formation of stable interfacial layer on the electrode surface during the initial cycling stabilizes reaction products at subsequent cycling stages as demonstrated by quantitative analyses of the discharge products and the gases released during charging. There is a quick switch from the predominant formation of Li2O2 to the predominant formation of side products during the first few cycles. However, after the formation of the stable interfacial layer, the yield of Li2O2 in the reaction products is stabilized at about 33-40%. Extended cycling under full discharge/charge conditions is achievable upon selection of appropriate electrode materials (carbon source and catalyst) and cycling protocol. Further investigation on the interfacial layer, which in situ forms on air electrode, may increase the long-term yield of Li2O2 during the cycling and enable highly reversible Li-O2 batteries required for practical applications.

Beyond successful ISR: case-by-case investigations for unmatched reassay results when ISR passed.

Incurred sample reanalysis (ISR) is now commonly practiced in regulated bioanalytical laboratories. With an average ISR success rate of 95% or higher and an increasing number of ISR tests being conducted, more and more situations deserve scientific evaluation or investigation for the unmatched reassay results revealed in ISR tests even though they meet the acceptance criteria. First, should an investigation be initiated when an ISR test is acceptable? How large a discrepancy or what situation would warrant an investigation? What would be the impact on a study? How would investigations regarding unmatched reassay results be conducted? What are the main root causes identified? Can normal random errors cause a large discrepancy in unfavorable combinations? How could the timeline and cost be affected? All these questions are addressed in this paper with five real case examples.

2009 White Paper on recent issues in regulated bioanalysis from the 3rd Calibration and Validation Group Workshop.

The 3rd Calibration and Validation Group Workshop on Recent Issues in Regulated Bioanalysis was organized by the Calibration and Validation Group as a 1.5-day full immersion workshop for contract research organizations, pharmaceutical companies and regulatory agencies to discuss several 'hot' topics concerning bioanalytical issues and regulatory challenges. A consensus was reached among panelists and attendees on many points regarding method validation of small molecules.

2010 white paper on recent issues in regulated bioanalysis & global harmonization of bioanalytical guidance.

The 4th Calibration and Validation Group Workshop on Recent Issues in Regulated Bioanalysis, a 2-day full immersion workshop, was organized by the Calibration and Validation Group. Contract research organizations, pharmaceutical companies and regulatory agencies came together to discuss several 'hot' topics concerning bioanalytical issues and regulatory challenges and to reach a consensus among panelists and attendees on many points regarding method validation of small and large molecules.

Internal standard response variations during incurred sample analysis by LC-MS/MS: Case by case trouble-shooting.

Internal standard (IS) responses can directly impact the accuracy of reported concentrations in bioanalysis as the majority of LC-MS/MS methods are based on analyte/IS response ratios for quantitation. Due to the complexity of incurred sample matrices and drug formulation, variable IS responses are quite common upon applying a validated method to the analysis of incurred samples. To maintain the integrity of a study and to avoid economic losses, it is therefore extremely important to monitor IS response variations during bioanalysis and to quickly identify the root causes if variations are observed. Presented in this article are twelve trouble-shooting examples from the analyses of incurred samples by a wide variety of bioanalytical methods, including human error, malfunctioning equipment/instruments, wrong material, matrix effect and inherent issues with a bioanalytical method. Insightful ideas for how to trouble-shoot and how to develop more reliable bioanalytical methods can be drawn from these practical examples.

Bioanalytical method development and validation using incurred samples--simultaneous quantitation of ramipril and ramiprilat in human EDTA plasma by LC-MS/MS.

A new method development and validation approach is proposed in order to develop a reliable method for the simultaneous quantitation of ramipril and ramiprilat in the presence of numerous labile metabolites. This new approach involves the usage of a synthesized labile acyl glucuronide of ramipril as well as individual and pooled incurred (study) samples in the development and validation process. Following the method validation and prior to its application to a large clinical study, a mini pilot study was performed to evaluate the performance of the method. When the samples from the mini pilot study were analyzed by two different scientists, 100% of the results from incurred sample reanalysis (ISR) matched within 8% of difference and the mean differences were 0.21% and 1.40% for ramipril and ramiprilat, respectively. The validated concentration range reported in this article is 0.2-80 ng/mL for both analytes. Various stabilities, such as bench-top, autosampler, freeze/thaw, and long-term, were also successfully evaluated. The key to the success were low sample processing temperature (4 degrees C), proper choice of sample extraction procedure, and adequate chromatographic conditions to obtain good peak shape without the need of derivatization and baseline separation between the analytes and their glucuronide metabolites.

Mass spectrometric quantitation of C-reactive protein using labeled tryptic peptides.

Given the extensive efforts applied toward proteomics and research in biomarkers, methods for the simultaneous measurement of proteins, peptides, metabolic intermediates, hormones, etc. in a complex sample may be required in the foreseeable future. Assays based on mass spectrometric detection may be suitable for meeting the demands of such complex samples with sensitivity and specificity. An analytical method for the quantitation of C-reactive protein (CRP), a well-known marker of inflammation, is described. Exact quantities of two synthetic (13)C-labeled CRP tryptic peptides were added as internal standards directly to the sample prior to chemical treatment, trypsinization, and liquid chromatography/mass spectrometry quantitation. C-reactive protein levels based on isotopic response ratios were measured. Intact C-reactive protein was spiked into blank rat urine for chemical and enzymatic treatment, producing linear response ratios of labeled to unlabeled peptides. For rigorous quantitation, standard curves, and quality control samples were prepared in rat urine with highly purified labeled and unlabeled peptides over the 50 pg-5 ng/muL concentration range. Using the same chemical and enzymatic treatment used for digestion of intact CRP, data from these samples demonstrated excellent analytical performance. The method was successfully applied toward the quantitation of urinary C-reactive protein from a study of drug-induced nephrotoxicity.

Regulation of cytochrome P450 by posttranslational modification.

Cytochrome P450s are a family of enzymes represented in all kingdoms with expression in many species. Over 3,000 enzymes have been identified in nature. Humans express 57 putatively functional enzymes with a variety of critical physiological roles. They are involved in the metabolic oxidation, peroxidation, and reduction of many endogenous and exogenous compounds including xenobiotics, steroids, bile acids, fatty acids, eicosanoids, environmental pollutants, and carcinogens [Nelson, D. R., Kamataki, T., Waxman, D. J., Guengerich, F. P., Estabrook, R. W., Feyereisen, R., Gonzalez, F. J., Coon, M. J., Gunsalus, I. C., Gotoh, O. (1993) The P450 superfamily: update on new sequences, gene mapping, accession numbers, early trivial names of enzymes, and nomenclature. DNA Cell Biol. 12(1):1-51.] The development of numerous diseases and disorders including cancer and cardiovascular and endocrine dysfunction has been linked to P450s. Several levels of regulation, including transcription, translation, and posttranslational modification, participate in maintaining the proper function of P450s. Modifications including phosphorylation, glycosylation, nitration, and ubiquitination have been described for P450s. Their physiological significance includes modulation of enzyme activity, targeting to specific cellular compartments, and tagging for proteasomal degradation. Knowledge of P450 posttranslational regulation is derived from studies with relatively few enzymes. In many cases, there is only enough evidence to suggest the occurrence and a possible role for the modification. Thus, many P450 enzymes have not been fully characterized. With the introduction of current proteomics tools, we are primed to answer many important questions regarding regulation of P450 in response to a posttranslational modification. This review considers regulation of P450 in a context that describes the potential role and physiological significance of each modification.

Complete chemical and enzymatic treatment of phosphorylated and glycosylated proteins on ProteinChip arrays.

A simple and quick protocol for chemical treatment, enzymatic digestion, and subsequent identification of proteins on ProteinChip arrays is presented. Chicken ovalbumin, bovine fetuin and a heavily posttranslationally modified protein, human epidermal growth factor receptor extracellular domain, were employed as model proteins to evaluate the novel protocol. The chemical treatment includes denaturation, reduction, and alkylation, while enzymatic digestion encompasses deglycosylation, dephosphorylation, and digestion by various proteases. All reactions were carried out on-chip in a sequential fashion. Peptide mass fingerprinting identified several peptides derived from the three proteins. This protocol was also applied to the analysis of urinary proteins from a male rat with puromycin-induced proteinuria. alpha-2u-Globulin, the major urinary protein in the normal male rat and albumin, the most abundant in the treated animal, were readily identified. This procedure demonstrates that complete on-chip treatment can be used for rapid protein identification and structural characterization.