In situ synthesis of Cu(II) dicarboxylate metal organic frameworks (MOFs) and their application as battery materials.

New materials for battery electrodes are paramount to ensuring future battery supply can meet the ever-increasing demand for energy storage. Furthermore, detailed investigation on the various physical and chemical aspects of these materials is required to allow the same level of nuanced microstructural and electrochemical tuning that is available for conventional electrode materials. Here a comprehensive investigation is undertaken on the poorly understood in situ reaction between dicarboxylic acids and the copper current collector that occurs during electrode formulation, using a series of simple dicarboxylic acids. Specifically, we focus on the relationship between the extent of the reaction and the properties of the acid. Additionally, the extent of the reaction was demonstrated to affect both the electrode microstructure and the electrochemical performance. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and small and ultra-small angle neutron scattering (U/SANS) are used to provide unprecedented detail on the microstructure ultimately leading to a deeper understanding of formulation based performance enhancing techniques. Ultimately, it was determined that the copper-carboxylates are the active material, not the parent acid, and in some cases i.e., copper malate, capacities as high as 828 mA h g-1 were achieved. This work lays the foundation for future studies that use the current collector as an "active" component in electrode formulation and function rather than simply an inactive component of a battery.

Formulation and mechanism of copper tartrate - a novel anode material for lithium-ion batteries.

Batteries play an increasingly critical role in the functioning of contemporary society. To ensure future proofing of battery technology, new materials and methods that overcome the current shortcomings need to be developed. Here we report the use of the inexpensive and off the shelf metal-carboxylate, copper tartrate, as a high-capacity anode material for lithium-ion batteries, providing a specific capacity of 744 mA h g-1 when cycled at 50 mA g-1. Additionally, an unusual capacity gain with cycling is investigated using advanced techniques including X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), and small and ultra-small angle neutron scattering (SANS and USANS), providing insight into the structure-performance relationship of the electrode. Subsequently, a novel method of in situ generation of the active material is demonstrated using the reaction between the parent acid, tartaric acid, and the copper current collector during electrode formulation. This serves to increase and stabilise the electrode performance, as well as to make use of a cheaper feedstock (tartaric acid), and reduce some of the "dead mass" of the copper current collector.

Competitive effects of salt and surfactant on the structure of nanoparticles in a binary system of nanoparticle and protein.

Small-angle neutron scattering (SANS) and dynamic light scattering (DLS) experiments have been carried out to study the competitive effects of NaCl and sodium dodecyl sulfate (SDS) surfactant on the evolution of the structure and interactions in a silica nanoparticle-Bovine serum albumin (BSA) protein system. The unique advantage of contrast-matching SANS has been utilized to particularly probe the structure of nanoparticles in the multi-component system. Silica nanoparticles and BSA protein both being anionic remain largely individual in the solution without significant adsorption. The non-adsorbing nature of protein is known to cause depletion attraction between nanoparticles at higher protein concentrations. The nanoparticles undergo immediate aggregation in the nanoparticle-BSA system on the addition of a small amount of salt [referred as the critical salt concentration (CSC)], much less than that required to induce aggregation in a pure nanoparticle dispersion. The salt ions screen the electrostatic repulsion between the nanoparticles, whereby the BSA-induced depletion attraction dominates the system and contributes to the nanoparticle aggregation of a mass fractal kind of morphology. Further, the addition of SDS in this system interestingly suppresses nanoparticle aggregation for salt concentrations lower than the CSC. The presence of SDS gives rise to additional electrostatic repulsion in the system by binding with the BSA protein via electrostatic and hydrophobic interactions. For salt concentrations higher than the CSC, the formation of clusters of nanoparticles is inevitable even in the presence of protein-surfactant complexes, but the mass fractal kind of branched aggregates transform to surface fractals. This has been attributed to the BSA-SDS complex induced depletion attraction along with salt-driven screening of electrostatic repulsion. Thus, the interplay of depletion and electrostatic and hydrophobic interactions has been utilized to tune the structures formed in a multicomponent silica nanoparticle-BSA-SDS/NaCl system.

Tuning of silica nanoparticle-lysozyme protein complexes in the presence of the SDS surfactant.

The structures of the complexes of anionic silica nanoparticle (size ∼ 16 nm)-lysozyme (cationic) protein, tuned by the addition of the anionic surfactant sodium dodecyl sulfate (SDS), have been investigated by dynamic light scattering (DLS) and small-angle neutron scattering (SANS). The unique advantage of contrast variation SANS has been used to probe the role of individual components in binary and ternary systems. The cationic lysozyme protein (at pH ∼ 7) adsorbs on the anionic silica nanoparticles and forms mass fractal aggregates due to the strong attractive interaction, whereas similarly charged SDS does not interact physically with silica nanoparticles. The presence of SDS, however, remarkably affects the nanoparticle-protein interactions via binding with the oppositely charged segments of lysozyme. In general, the SDS-lysozyme complexes possess a variety of structures (e.g., insoluble complexes of Ly(DS)8, crystalline structure, or micelle-like structure) depending on the surfactant-to-protein molar ratio (S/P). In the ternary system (HS40-lysozyme-SDS), lysozyme preferentially binds with SDS, instead of directly to nanoparticles. At low S/Ps (0 ≤ S/P ≤ 10), the SDS concentration is not enough to fully neutralize the charge of lysozyme, leading to the formation of cationic SDS-lysozyme complex-mediated nanoparticle aggregation. The morphology of the nanoparticle-(lysozyme-SDS) complexes is also found to be mass fractal kind where the fractal dimension increases with increasing SDS concentration. At S/P > 10, there is sufficient SDS to fully neutralize the lysozyme in the absence of competing charges from the particle but it is at S/P = 50 before all lysozyme desorbs from the particle and binds completely to the overwhelming amount of SDS, creating an oppositely charged lysozyme-SDS complex, which is repelled from the particle.

3D Printable Soy/Silk Hybrid Hydrogels for Tissue Engineering Applications.

The development of protein-based 3D printable hydrogel systems with tunable structure and properties is a critical challenge in contemporary biomedicine. Particularly, 3D printing of modular hydrogels comprising different types of protein tertiary structure, such as globular and fibrous, has not yet been achieved. Here we report the extrusion-based 3D printing of hybrid hydrogels photochemically co-cross-linked between globular soy protein isolate (SPI) and fibrous silk fibroin (SF) for the first time. The hierarchical structure and organization of pristine SPI and SF, and 1:3 (SPI/SF) hybrid inks under various shear stress were investigated using in situ rheology combined with small-/ultra-small-angle neutron scattering (Rheo-SANS/USANS). The hybrid ink exhibited an isotropic mass fractal structure that was stable between tested shear rates of 0.1 and 100 s-1 (near printing shear). The kinetics of sol-gel transition during the photo-cross-linking reaction and the micromechanical properties of fabricated hydrogels were investigated using photorheology and atomic force microscopy, where the hybrid hydrogels exhibited tunable storage and Young's moduli in the range of 13-29 and 214-811 kPa, respectively. The cross-link density and printing accuracy of hybrid hydrogels and inks were observed to increase with the increase in SF content. The 3D printed hybrid hydrogels exhibited a micropore size larger than that of solution casted hydrogels; where the 3D printed 1:3 (SPI/SF) hybrid hydrogel showed a pore size about 7.6 times higher than that of the casted hydrogel. Moreover, the fabricated hybrid hydrogels exhibit good mouse fibroblast cell attachment, viability, and proliferation, demonstrating their potential for tissue engineering applications.

Precipitation kinetics, microstructure evolution and mechanical behavior of a developed Al-Mn-Sc alloy fabricated by selective laser melting.

The dynamic metallurgical characteristics of the selective laser melting (SLM) process offer fabricated materials with non-equilibrium microstructures compared to their cast and wrought counterparts. To date, few studies on the precipitation kinetics of SLM processed heat-treatable alloys have been reported, despite the importance of obtaining such detailed knowledge for optimizing the mechanical properties. In this study, for the first time, the precipitation behavior of an SLM fabricated Al-Mn-Sc alloy was systematically investigated over the temperature range of 300-450 °C. The combination of in-situ synchrotron-based ultra-small angle X-ray scattering (USAXS), small angle X-ray scattering (SAXS) and X-ray diffraction (XRD) revealed the continuous evolution of Al6Mn and Al3Sc precipitates upon isothermal heating in both precipitate structure and morphology, which was confirmed by ex-situ transmission electron microscopy (TEM) studies. A pseudo-delay nucleation and growth phenomenon of the Al3Sc precipitates was observed for the SLM fabricated Al-Mn-Sc alloy. This phenomenon was attributed to the preformed Sc clusters in the as-fabricated condition due to the intrinsic heat treatment effect induced by the unique layer-by-layer building nature of SLM. The growth kinetics for the Al6Mn and Al3Sc precipitates were established based on the in-situ X-ray studies, with the respective activation energies determined to be (74 ± 4) kJ/mol and (63 ± 9) kJ/mol. The role of the precipitate evolution on the final mechanical properties was evaluated by tensile testing, and an observed discontinuous yielding phenomenon was effectively alleviated with increased aging temperatures.

Soft and Hard Interactions between Polystyrene Nanoplastics and Human Serum Albumin Protein Corona.

Upon contact with biological fluids, the surface of nanoparticles is surrounded by many types of proteins, forming a so-called "protein corona". The physicochemical properties of the nanoparticle/corona complex depend predominantly on the nature of the protein corona. An understanding of the structure of the corona and the resulting complex provides insight into the structure-activity relationship. Here, we structurally evaluate the soft and hard components of the protein corona, formed from polystyrene (PS) nanoplastics and human serum albumin (HSA). Using circular dichroism spectroscopy to elucidate the structure of HSA within the complex, we establish the effect of nanoparticle size and pH on the nature of the protein corona formed- whether hard or soft. Despite the weak interaction between PS and the HSA corona, small angle neutron scattering revealed the formation of a complex structure that enhanced the intermolecular interactions between HSA proteins, PS particles, and the HS/PSA complexes. Fractal formation occurred under conditions where the interaction between PS and HSA was strong, and increasing HSA concentrations suppressed the degree of aggregation. The size of the nanoparticles directly influenced the nature of the protein corona, with larger particles favoring the formation of a soft corona, due to the decreased PS-HSA attraction.

Solution structure of linear battacin lipopeptides - the effect of lengthening fatty acid chain.

In recent years, lipopeptides have received attention for their enhanced antimicrobial activity, especially against multi-drug resistant (MDR) pathogens. We have previously reported that the bacterial soil extracted, novel cyclic lipopeptide, battacin, and its synthetic analogues have enhanced antimicrobial activity against various Gram negative, Gram positive and fungal pathogens. In particular, the modification of the hydrophobic fatty acid chain and molecular structure has improved its activity. We have used small angle X-ray scattering (SAXS) and circular dichroism (CD) to characterise the low resolution structure of battacin lipopeptides containing covalently bonded fatty acid chains and the one without it. In the absence of fatty acids or with short fatty acid chain, the peptides adopted an extended random coil structure that is best described barbell-like shape, while fatty acids that are sufficiently long induced an aggregation into a ∼4.0 nm diameter core shell sphere. While the kinked structure found within this barbell shape may have a role in antimicrobial activities, the self-assembly of the battacin analogue with the longest fatty acid chain may have a correlation to the declined antibacterial activities.

Morphology-Mediated Photoresponsive and Fluorescence Behaviors of Azobenzene-Containing Block Copolymers.

We investigated the relationship between the self-assembled morphology of poly( tert-butyl acrylate)- block-poly(6-[4-(4'-methoxyphenylazo)phenoxy]hexyl methacrylate) (P tBA- b-PAzoMA) block copolymers and their photoresponsive and fluorescence behaviors. The morphology of P tBA- b-PAzoMA copolymers was manipulated by dissolving them in mixed dimethylformamide (DMF)/hexanol solvents. When P tBA- b-PAzoMA was dissolved in DMF-rich (neutral) solvents, a favorable interaction between the DMF molecules and both blocks resulted in a random-coiled conformation. The unconfined morphology facilitated the formation of both nonassociated and head-to-head organized azobenzene mesogens, which promoted fluorescence emission. When hexanol, a P tBA-selective solvent, was added to DMF, the solvency of P tBA- b-PAzoMA worsened, leading to its assembly into micelles, with PAzoMA in the micelle core. The confinement of azobenzene moieties in the micelle core hindered their trans-to- cis photoisomerization, thereby considerably decreasing the kinetics of photoisomerization and the population of cis isomers. Additionally, a nanoconfined geometry resulted in compactly packed chromophores, causing fluorescence loss. When P tBA- b-PAzoMA was exposed to UV light, the increased number of cis isomers hampered the closely packed mesogens, resulting in a substantial enhancement of fluorescence emission. When the mole fraction of the PAzoMA block was increased, P tBA- b-PAzoMA formed clusters, causing the slow kinetics of photoisomerization and fluorescence quenching.

Tough Photocrosslinked Silk Fibroin/Graphene Oxide Nanocomposite Hydrogels.

The development of protein-based hydrogels for tissue engineering applications is often limited by their mechanical properties. Herein, we present the facile fabrication of tough regenerated silk fibroin (RSF)/graphene oxide (GO) nanocomposite hydrogels by a photochemical cross-linking method. The RSF/GO composite hydrogels demonstrated soft and adhesive properties during initial stages of photocrosslinking (<2 min), which is not observed for the pristine RSF hydrogel, and rendered a tough and nonadhesive hydrogel upon complete cross-linking (10 min). The composite hydrogels exhibited superior tensile mechanical properties, increased ß-sheet content, and decreased chain mobility compared to that of the pristine RSF hydrogels. The composite hydrogels demonstrated Young's modulus as high as ∼8 MPa, which is significantly higher than native cartilage (∼1.5 MPa), and tensile toughness as high as ∼2.4 MJ/m3, which is greater than that of electroactive polymer muscles and at par with RSF/GO composite membranes fabricated by layer-by-layer assembly. Small-angle scattering study reveals the hierarchical structure of photocrosslinked RSF hydrogels to comprise randomly distributed water-poor (hydrophobic) and water-rich (hydrophilic) regions at the nanoscale, whereas water pores and channels exhibiting fractal-like characteristics at the microscale. The size of hydrophobic domain (containing ß-sheets) was observed to increase slightly with GO incorporation and/or alcohol post-treatment, whereas the size of the hydrophilic domain (intersheet distance containing random coils) was observed to increase significantly, which influences/affects water uptake capacity, cross-link density, and mechanical properties of hydrogels. The presented results have implications for both fundamental understanding of the structure-property relationship of RSF-based hydrogels and their technological applications.

Biomineralization of Calcium Phosphate and Calcium Carbonate within Iridescent Chitosan/Iota-Carrageenan Multilayered Films.

This work systematically explores the biomineralization of calcium phosphate (CaP) and carbonate (CaCO3) within chitosan/iota-carrageenan multilayer films. Multilayer films of chitosan and iota-carrageenan (up to 128-coupled layers) were prepared on glass substrates by a layer-by-layer dip-coating technique. Cryo-scanning electron microscopy revealed dense interfaces between the chitosan and iota-carrageenan layers with thicknesses in the range 250 and 350 nm in the hydrated state, accounting for the iridescent nature of multilayer films when wet. Immersion of the multilayered films in simulated body fluid or simulated seawater at 25 °C resulted in the mineralization of CaP and CaCO3, respectively, at the interfaces between the biopolymer layers and modified the iridescence of the films. Lamellar scattering features in small-angle neutron scattering measurements of the mineralized films provided evidence of the localized mineralization. Further evidence of this was found through the lack of change in the dynamic and static correlation lengths of the polymer networks within the bulk phase of the chitosan and iota-carrageenan layers. CaP mineralization occurred to a greater extent than CaCO3 mineralization within the films, evidenced by the higher lamellar density and greater rigidity of the CaP-mineralized films. Results provide valuable new insights into CaP and CaCO3 biomineralization in biopolymer networks.

Chain shape and thin film behaviour of poly(thiophene)-graft-poly(acrylate urethane).

Electronic graft copolymers with conjugated polymer backbones are emerging as promising materials for various organic electronics. These materials combine the advantages of organic electronic materials, such as molecular tunability of opto-electronic and electrochemical properties, with solution processability and other 'designer' physical and mechanical properties imparted through the addition of grafted polymer side chains. Future development of such materials with complex molecular architecture requires a better understanding of the effect of molecular parameters, such as side chain length, on the structure and, in turn, on the electronic properties. In this study, poly(thiophene)-graft-poly(acrylate urethane) (PTh-g-PAU) was examined as a model system and we investigate the effect of side chain length on the overall shape and size in solution. Furthermore, the changes in the swelling behaviour of the graft copolymer thin films help in understanding their electrochemical redox properties.

Sugar-coated proteins: the importance of degree of polymerisation of oligo-galacturonic acid on protein binding and aggregation.

We have simplified the structural heterogeneity of protein-polysaccharide binding by investigating protein binding to oligosaccharides. The interactions between bovine beta-lactoglobulin A (ßLgA) and oligo-galacturonic acids (OGAs) with various numbers of sugar residues have been investigated with a range of biophysical techniques. We show that the ßLgA-OGA interaction is critically dependent on the length of the oligosaccharide. Isothermal titration calorimetry results suggest that a minimum length of 7 or 8 sugar residues is required in order to exhibit appreciable exothermic interactions with ßLgA - shorter oligosaccharides show no enthalpic interactions at any concentration ratio. When titrating ßLgA into OGAs with more than 7-8 sugar residues the sample solution also became turbid with increasing amounts of ßLgA, indicating the formation of macroscopic assemblies. Circular dichroism, thioflavin T fluorescence and small angle X-ray/neutron scattering experiments revealed two structural regimes during the titration. When OGAs were in excess, ßLgA formed discrete assemblies upon OGA binding, and no subsequent aggregation was observed. However, when ßLgA was present in excess, multi-scale structures were formed and this eventually led to the separation of the solution into two liquid-phases.

One-step formulation of nonionic surfactant bicelles (NSBs) by a double-tailed polyglycerol-type nonionic surfactant.

Bicelles are generally formed by phospholipid-based systems and are useful for various applications, such as nanocarriers or membrane protein crystallization. The same disc-like assemblies, nonionic surfactant bicelles (NSBs), can also be formed using nonionic amphiphiles, but this has not been reported extensively. We report a novel NSB system that employs the double-tailed nonionic amphiphile, polyglyceryl dialkyl ether (C12CmGn), which has two alkyl chains and a polyglyceryl group. A symmetric-tail molecule, C12C12G13.8, formed vesicles, whereas an asymmetric-tail molecule, C12C14G15.5, formed NSBs through a simple one-step process using ultrasonication. The 1 wt% aqueous solution of C12C14G15.5 was in a two-phase equilibrium of a lamellar phase and a water phase. Transparent dispersion was obtained through ultrasonication treatment. The size distribution in the dispersion was obtained by dynamic light scattering (DLS), resulting in a narrow distribution of around 20 nm in diameter. A negatively-stained transmission electron microscopy (TEM) image showed oblong and spherical shapes, which are typically observed in bicelle-forming systems. A small angle neutron scattering (SANS) measurement well proved bicelle formation by fitting a core-shell bicelle form factor model. The disc thickness and diameter were in agreement with the values obtained by DLS and TEM, respectively. A larger shell thickness at the rim part than at the flat disc part suggested that NSB aggregates have inhomogeneous molecular distribution. Similar to phospholipid systems, the bicelle-forming C12C14G15.5 system produced a defective lamellar phase formation at high surfactant concentrations, whereas a general lamellar phase was formed in the vesicle-forming C12C12G13.8 system.

Combined pressure and temperature denaturation of ribonuclease A produces alternate denatured states.

Protein folding, unfolding and misfolding have become critically important to a range of health and industry applications. Increasing high temperature and high pressure are used to control and speed up reactions. A number of studies have indicated that these parameters can have a large effecton protein structure and function. Here we describe the additive effects of these parameters on the small angle scattering behaviour of ribonuclease A. We find that alternate unfolded structures can be obtained with combined high pressure and temperature treatment of the protein.

Unraveling the Effects of Cationic Peptides on Vesicle Structures: Insights into Peptide-Membrane Interactions.

Antimicrobial resistance is a pressing global health issue, with millions of lives at risk by 2050, necessitating the development of alternatives with broad-spectrum activity against pathogenic microbes. Antimicrobial peptides provide a promising solution by combating microbes, modulating immunity, and reducing resistance development through membrane and intracellular targeting. PuroA, a synthetic peptide derived from the tryptophan-rich domain of puroindoline A, exhibits potent antimicrobial activity against various pathogens, while the rationally designed P1 peptide demonstrates enhanced antimicrobial activity with its specific composition. This paper investigates the concentration-dependent effects of these cationic peptides on distinct types of vesicles representing strong-negative bacterial cell membranes (S-vesicles), weak-negative bacterial cell membranes (W-vesicles), and mammalian cell membranes (M-vesicles). To investigate the interactions between the peptides and vesicles, small-angle neutron scattering experiments were conducted. The cationic peptides, PuroA and P1, interact with S-vesicles through electrostatic interactions, leading to distinct effects. PuroA accumulates on the vesicle surface, increasing Rcore and Rtotal, aligning with the carpet model. P1 disrupts the vesicle structure at higher concentrations, consistent with the detergent model. Neither peptide significantly affects W-vesicles, emphasizing the role of charge. In uncharged M-vesicles, both peptides decrease Rcore and Rtotal and increase tshell, indicating peptide insertion and altered bilayer properties. These findings provide valuable insights into peptide-membrane interactions and their impact on vesicle structures. Furthermore, the implications of these findings extend to the potential development of innovative antimicrobial agents and drug delivery systems that specifically target bacterial and mammalian membranes. This research contributes to the advancement of understanding peptide-membrane interactions and lays the foundation for the design of approaches for targeting membranes in various biomedical applications.

Nano- and Microstructures of Collagen-Nanocellulose Hydrogels as Engineered Extracellular Matrices.

The extracellular matrix (ECM) is the fundamental acellular element of human tissues, providing their mechanical structure while delivering biomechanical and biochemical signals to cells. Three-dimensional (3D) tissue models commonly use hydrogels to recreate the ECM in vitro and support the growth of cells as organoids and spheroids. Collagen-nanocellulose (COL-NC) hydrogels rely on the blending of both polymers to design matrices with tailorable physical properties. Despite the promising application of these biomaterials in 3D tissue models, the architecture and network organization of COL-NC remain unclear. Here, we investigate the structural effects of incorporating NC fibers into COL hydrogels by small-angle neutron scattering (SANS) and ultra-SANS (USANS). The critical hierarchical structure parameters of fiber dimensions, interfiber distance, and coassembled open structures of NC and COL in the absence and presence of cells were determined. We found that NC expanded and increased the homogeneity in the COL network without affecting the inherent fiber properties of both polymers. Cells cultured as spheroids in COL-NC remodeled the hydrogel network without a significant impact on its architecture. Our study reveals the polymer organization of COL-NC hydrogels and demonstrates SANS and USANS as exceptional techniques to reveal nano- and micron-scale details on polymer organization, which leads to a better understanding of the structural properties of hydrogels to engineer novel ECMs.

Structure of biomimetic casein micelles: Critical tests of the hydrophobic colloid and multivalent-binding models using recombinant deuterated and phosphorylated ß-casein.

Milk contains high concentrations of amyloidogenic casein proteins and is supersaturated with respect to crystalline calcium phosphates such as apatite. Nevertheless, the mammary gland normally remains unmineralized and free of amyloid. Unlike κ-casein, ß- and αS-caseins are highly effective mineral chaperones that prevent ectopic and pathological calcification of the mammary gland. Milk invariably contains a mixture of two to five different caseins that act on each other as molecular chaperones. Instead of forming amyloid fibrils, several thousand caseins and hundreds of nanoclusters of amorphous calcium phosphate combine to form fuzzy complexes called casein micelles. To understand the biological functions of the casein micelle its structure needs to be understood better than at present. The location in micelles of the highly amyloidogenic κ-casein is disputed. In traditional hydrophobic colloid models, it, alone, forms a stabilizing surface coat that also determines the average size of the micelles. In the recent multivalent-binding model, κ-casein is present throughout the micelle, in intimate contact with the other caseins. To discriminate between these models, a range of biomimetic micelles was prepared using a fixed concentration of the mineral chaperone ß-casein and nanoclusters of calcium phosphate, with variable concentrations of κ-casein. A biomimetic micelle was also prepared using a highly deuterated and in vivo phosphorylated recombinant ß-casein with calcium phosphate and unlabelled κ-casein. Neutron and X-ray scattering experiments revealed that κ-casein is distributed throughout the micelle, in quantitative agreement with the multivalent-binding model but contrary to the hydrophobic colloid models.

Copolymers of Gelatin-graft-poly(3-hexylthiophene) for Transient Electronics.

As transient electronics continue to advance, the demand for new materials has given rise to the exploration of conducting polymer (CP)-based electronic materials. The big challenge lies in balancing conductivity while introducing controlled degradable properties into CP-based transient materials. In response to this, we present in this work a concept of using conducting polymers attached to an enzymatically biodegradable biopolymer to create transient polymer electronics materials. Specifically, poly(3-hexyl thiophene) (P3HT) is covalently grafted onto biopolymer gelatin, affording graft copolymer gelatin-graft-poly(3-hexyl thiophene) (termed Gel-g-P3HT). The thin films of Gel-g-P3HT that were produced by optimized processing solvent (THF/H2O cosolvent) showed enhanced π-π stacking domains of P3HT, resulting in semiconducting thin films with good electroactivity. Due to the presence of amide bonds in the gelatin backbone, Gel-g-P3HT underwent degradation over a period of 5 days, resulting in the formation of amphiphilic micellar nanoparticles that are biocompatible and nontoxic. The potential of these conductive and degradable graft copolymers was demonstrated in a pressure sensor. This research paves the way for developing biocompatible and enzymatically degradable polymer materials based on P3HT, enabling the next generation of transient polymer electronics for diverse applications, such as skin, implantable, and environmental electronics.

3D-Printable Sustainable Bioplastics from Gluten and Keratin.

Bioplastic films comprising both plant- and animal-derived proteins have the potential to integrate the optimal characteristics inherent to the specific domain, which offers enormous potential to develop polymer alternatives to petroleum-based plastic. Herein, we present a facile strategy to develop hybrid films comprised of both wheat gluten and wool keratin proteins for the first time, employing a ruthenium-based photocrosslinking strategy. This approach addresses the demand for sustainable materials, reducing the environmental impact by using proteins from renewable and biodegradable sources. Gluten film was fabricated from an alcohol-water mixture soluble fraction, largely comprised of gliadin proteins. Co-crosslinking hydrolyzed low-molecular-weight keratin with gluten enhanced its hydrophilic properties and enabled the tuning of its physicochemical properties. Furthermore, the hierarchical structure of the fabricated films was studied using neutron scattering techniques, which revealed the presence of both hydrophobic and hydrophilic nanodomains, gliadin nanoclusters, and interconnected micropores in the matrix. The films exhibited a largely (>40%) ß-sheet secondary structure, with diminishing gliadin aggregate intensity and increasing micropore size (from 1.2 to 2.2 µm) with an increase in keratin content. The hybrid films displayed improved molecular chain mobility, as evidenced by the decrease in the glass-transition temperature from ~179.7 °C to ~173.5 °C. Amongst the fabricated films, the G14K6 hybrid sample showed superior water uptake (6.80% after 30 days) compared to the pristine G20 sample (1.04%). The suitability of the developed system for multilayer 3D printing has also been demonstrated, with the 10-layer 3D-printed film exhibiting >92% accuracy, which has the potential for use in packaging, agricultural, and biomedical applications.