RESUMEN
AAA+ proteases are responsible for protein degradation in all branches of life. Using single-molecule and ensemble assays, Cordova et al. investigate how the bacterial protease ClpXP steps through a substrate's polypeptide chain and construct a quantitative kinetic model that recapitulates the interplay between stochastic and deterministic behaviors of ClpXP.
Asunto(s)
Endopeptidasa Clp/química , Endopeptidasa Clp/metabolismoRESUMEN
The ubiquitin proteasome system (UPS) is the main ATP-dependent protein degradation pathway in the cytosol and nucleus of eukaryotic cells. At its centre is the 26S proteasome, which degrades regulatory proteins and misfolded or damaged proteins. In a major breakthrough, several groups have determined high-resolution structures of the entire 26S proteasome particle in different nucleotide conditions and with and without substrate using cryo-electron microscopy combined with other techniques. These structures provide some surprising insights into the functional mechanism of the proteasome and will give invaluable guidance for genetic and biochemical studies of this key regulatory system.
Asunto(s)
Citosol/química , Complejo de la Endopetidasa Proteasomal/genética , Proteínas/genética , Ubiquitina/genética , Núcleo Celular/genética , Microscopía por Crioelectrón , Citosol/metabolismo , Complejos Multiproteicos/química , Complejos Multiproteicos/metabolismo , Complejo de la Endopetidasa Proteasomal/química , Proteínas/química , Proteolisis , Ubiquitina/metabolismoRESUMEN
Charge detection mass spectrometry (CDMS) was examined as a means of studying proteasomes. To this end, the following masses of the 20S, 19S, 26S, and 30S proteasomes from Saccharomyces cerevisiae (budding yeast) were measured: m(20S) = 738.8 ± 2.9 kDa, m(19S) = 926.2 ± 4.8 kDa, m(26S) = 1,637.0 ± 7.6 kDa, and m(30S) = 2,534.2 ± 10.8 kDa. Under some conditions, larger (20S)x (where x = 1 to â¼13) assemblies are observed; the 19S regulatory particle also oligomerizes, but to a lesser extent, forming (19S)x complexes (where x = 1 to 4, favoring the x = 3 trimer). The (20S)x oligomers are favored in vitro, as the pH of the solution is lowered (from 7.0 to 5.4, in a 20 mM ammonium acetate solution) and may be related to in vivo proteasome storage granules that are observed under carbon starvation. From measurements of m(20S)x (x = 1 to â¼13) species, it appears that each multimer retains all 28 proteins of the 20S complex subunit. Several types of structures that might explain the formation of (20S)x assemblies are considered. We stress that each structural type [hypothetical planar, raft-like geometries (where individual proteasomes associate through side-by-side interactions); elongated, rodlike geometries (where subunits are bound end-to-end); and geometries that are roughly spherical (arising from aggregation through nonspecific subunit interactions)] is highly speculative but still interesting to consider, and a short discussion is provided. The utility of CDMS for characterizing proteasomes and related oligomers is discussed.
Asunto(s)
Espectrometría de Masas , Complejo de la Endopetidasa Proteasomal/química , Espectrometría de Masas/instrumentación , Espectrometría de Masas/métodos , Modelos Moleculares , Concentración de Iones de Hidrógeno , Saccharomyces cerevisiae/químicaRESUMEN
BACKGROUND: Factors that lead to successful SARS-CoV-2 transmission are still not well described. We investigated the association between a case's viral load and the risk of transmission to contacts in the context of other exposure-related factors. METHODS: Data were generated through routine testing and contact tracing at a large university. Case viral loads were obtained from cycle threshold values associated with a positive polymerase chain reaction test result from October 1, 2020 to April 15, 2021. Cases were included if they had at least one contact who tested 3-14 days after the exposure. Case-contact pairs were formed by linking index cases with contacts. Chi-square tests were used to evaluate differences in proportions of contacts testing positive. Generalized estimating equation models with a log link were used to evaluate whether viral load and other exposure-related factors were associated with a contact testing positive. RESULTS: Median viral load among the 212 cases included in the study was 5.6 (1.8-10.4) log10 RNA copies per mL of saliva. Among 365 contacts, 70 (19%) tested positive following their exposure; 36 (51%) were exposed to a case that was asymptomatic or pre-symptomatic on the day of exposure. The proportion of contacts that tested positive increased monotonically with index case viral load (12%, 23% and 25% corresponding to < 5, 5-8 and > 8 log10 copies per mL, respectively; X2 = 7.18, df = 2, p = 0.03). Adjusting for cough, time between test and exposure, and physical contact, the risk of transmission to a close contact was significantly associated with viral load (RR = 1.27, 95% CI 1.22-1.32). CONCLUSIONS: Further research is needed to understand whether these relationships persist for newer variants. For those variants whose transmission advantage is mediated through a high viral load, public health measures could be scaled accordingly. Index cases with higher viral loads could be prioritized for contact tracing and recommendations to quarantine contacts could be made according to the likelihood of transmission based on risk factors such as viral load.
Asunto(s)
COVID-19 , SARS-CoV-2 , COVID-19/epidemiología , Trazado de Contacto , Humanos , Cuarentena , Carga ViralRESUMEN
Multiple ion fragmentation methods involving collision-induced dissociation (CID), higher-energy collisional dissociation (HCD) with regular and very high energy settings, and electron-transfer dissociation with supplementary HCD (EThcD) are implemented to improve the confidence of cross-link identifications. Three different S. cerevisiae proteasome samples cross-linked by diethyl suberthioimidate (DEST) or bis(sulfosuccinimidyl)suberate (BS3) are analyzed. Two approaches are introduced to combine interpretations from the above four methods. Working with cleavable cross-linkers such as DEST, the first approach searches for cross-link diagnostic ions and consistency among the best interpretations derived from all four MS2 spectra associated with each precursor ion. Better agreement leads to a more definitive identification. Compatible with both cleavable and noncleavable cross-linkers such as BS3, the second approach multiplies scoring metrics from a number of fragmentation experiments to derive an overall best match. This significantly increases the scoring gap between the target and decoy matches. The validity of cross-links fragmented by HCD alone and identified by Kojak, MeroX, pLink, and Xi was evaluated using multiple fragmentation data. Possible ways to improve the identification credibility are discussed. Data are available via ProteomeXchange with identifier PXD018310.
Asunto(s)
Péptidos , Saccharomyces cerevisiae , Algoritmos , Reactivos de Enlaces Cruzados , Iones , Espectrometría de Masas en TándemRESUMEN
Ubiquitin and some of its homologues target proteins to the proteasome for degradation. Other ubiquitin-like domains are involved in cellular processes unrelated to the proteasome, and proteins containing these domains remain stable in the cell. We find that the 10 yeast ubiquitin-like domains tested bind to the proteasome, and that all 11 identified domains can target proteins for degradation. Their apparent proteasome affinities are not directly related to their stabilities or functions. That is, ubiquitin-like domains in proteins not part of the ubiquitin proteasome system may bind the proteasome more tightly than domains in proteins that are bona fide components. We propose that proteins with ubiquitin-like domains have properties other than proteasome binding that confer stability. We show that one of these properties is the absence of accessible disordered regions that allow the proteasome to initiate degradation. In support of this model, we find that Mdy2 is degraded in yeast when a disordered region in the protein becomes exposed and that the attachment of a disordered region to Ubp6 leads to its degradation.
Asunto(s)
Endopeptidasas/metabolismo , Complejo de la Endopetidasa Proteasomal/metabolismo , Proteolisis , Proteínas de Saccharomyces cerevisiae/química , Proteínas de Saccharomyces cerevisiae/metabolismo , Saccharomyces cerevisiae/metabolismo , Ubiquitina/química , Ubiquitina/metabolismo , Unión Proteica , Conformación Proteica , Transporte de ProteínasRESUMEN
The proteasome has pronounced preferences for the amino acid sequence of its substrates at the site where it initiates degradation. Here, we report that modulating these sequences can tune the steady-state abundance of proteins over 2 orders of magnitude in cells. This is the same dynamic range as seen for inducing ubiquitination through a classic N-end rule degron. The stability and abundance of His3 constructs dictated by the initiation site affect survival of yeast cells and show that variation in proteasomal initiation can affect fitness. The proteasome's sequence preferences are linked directly to the affinity of the initiation sites to their receptor on the proteasome and are conserved between Saccharomyces cerevisiae, Schizosaccharomyces pombe, and human cells. These findings establish that the sequence composition of unstructured initiation sites influences protein abundance in vivo in an evolutionarily conserved manner and can affect phenotype and fitness.
Asunto(s)
Complejo de la Endopetidasa Proteasomal/metabolismo , Células HEK293 , Humanos , Proteolisis , Saccharomyces cerevisiae/metabolismo , Schizosaccharomyces/metabolismo , Especificidad por SustratoRESUMEN
Ubiquitin and polyubiquitin chains target proteins for a wide variety of cellular processes. Ubiquitin-mediated targeting is regulated by the lysine through which the ubiquitins are linked as well as the broader ubiquitin landscape on the protein. The mechanisms of this regulation are not fully understood. For example, the canonical proteasome targeting signal is a lysine 48-linked polyubiquitin chain, and the canonical endocytosis signal is a lysine 63-linked polyubiquitin chain. However, lysine 63-linked polyubiquitin chains can also target substrates for degradation. Biochemical studies of ubiquitinated proteins have been limited by the difficulty of building proteins with well-defined polyubiquitin chains. Here we describe an efficient and versatile method for synthesizing ubiquitin chains of defined linkage and length. The synthesized ubiquitin chains are then attached to any protein containing a ubiquitin moiety. These proteins can be used to study ubiquitin targeting in in vitro assays in the tightly controlled manner required for biochemical studies.
Asunto(s)
Poliubiquitina/biosíntesis , Complejo de la Endopetidasa Proteasomal/biosíntesis , Proteínas de Saccharomyces cerevisiae/biosíntesis , Ubiquitinas/biosíntesis , Endocitosis/fisiología , Humanos , Lisina/biosíntesis , Lisina/química , Poliubiquitina/química , Complejo de la Endopetidasa Proteasomal/química , Proteínas de Saccharomyces cerevisiae/química , Factores de Tiempo , Ubiquitinas/químicaRESUMEN
The 26S proteasome is the molecular machine at the center of the ubiquitin proteasome system and is responsible for adjusting the concentrations of many cellular proteins. It is a drug target in several human diseases, and assays for the characterization of modulators of its activity are valuable. The 26S proteasome consists of two components: a core particle, which contains the proteolytic sites, and regulatory caps, which contain substrate receptors and substrate processing enzymes, including six ATPases. Current high-throughput assays of proteasome activity use synthetic fluorogenic peptide substrates that report directly on the proteolytic activity of the proteasome, but not on the activities of the proteasome caps that are responsible for protein recognition and unfolding. Here, we describe a simple and robust assay for the activity of the entire 26S proteasome using fluorescence anisotropy to follow the degradation of fluorescently labeled protein substrates. We describe two implementations of the assay in a high-throughput format and show that it meets the expected requirement of ATP hydrolysis and the presence of a canonical degradation signal or degron in the target protein.
Asunto(s)
Polarización de Fluorescencia/métodos , Colorantes Fluorescentes/química , Complejo de la Endopetidasa Proteasomal/química , Proteolisis , Proteínas de Saccharomyces cerevisiae/química , Saccharomyces cerevisiae/enzimología , HumanosRESUMEN
Protein ubiquitin modifications present a vexing analytical challenge, because of the dynamic changes in the site of modification on the substrate, the number of ubiquitin moieties attached, and the diversity of linkage patterns in which they are attached. Presented here is a method to confidently assign size and linkage type of polyubiquitin modifications. The method combines intact mass measurement to determine the number of ubiquitin moieties in the chain with backbone fragmentation by 193-nm ultraviolet photodissociation (UVPD) to determine the linkage pattern. UVPD fragmentation of proteins leads to reproducible backbone cleavage at almost every inter-residue position, and in polyubiquitin chains, the N-terminally derived fragments from each constituent monomer are identical, up to the site of conjugation. The N-terminal ubiquitin fragment ions are superimposed to create a diagnostic pattern that allows easy recognition of the dominant chain linkages. The method is demonstrated by achieving almost-complete fragmentation of monoubiquitin and then, subsequently, fragmentation of dimeric, tetrameric, and longer Lys48- and Lys63-linked ubiquitin chains. The utility of the method for the analysis of mixed linkage chains is confirmed for mixtures of Lys48 and Lys63 tetramers with known relative concentrations and for an in vitro-formulated ubiquitin chain attached to a substrate protein.
Asunto(s)
Espectrometría de Masas/métodos , Poliubiquitina/química , Animales , Humanos , Lisina/análisis , Ratones , Fotólisis , Rayos UltravioletaRESUMEN
By reconstituting the recently discovered prokaryotic ubiquitin-like protein (Pup)--proteasome degradation system in vitro, Weber-Ban and colleagues (Striebel et al, 2010) elucidate its mechanism and describe a surprising variation on the established principles of protease targeting. Nevertheless, their findings suggest that the bacterial and eukaryotic systems follow the same overall principles even if the details differ.
Asunto(s)
Adenosina Trifosfatasas/metabolismo , Proteínas Bacterianas/metabolismo , Mycobacterium tuberculosis/metabolismo , Complejo de la Endopetidasa Proteasomal/metabolismo , Ubiquitinas/metabolismoRESUMEN
Senataxin is an evolutionarily conserved RNA-DNA helicase involved in DNA repair and transcription termination that is associated with human neurodegenerative disorders. Here, we investigated whether Senataxin loss affects protein homeostasis based on previous work showing R-loop-driven accumulation of DNA damage and protein aggregates in human cells. We find that Senataxin loss results in the accumulation of insoluble proteins, including many factors known to be prone to aggregation in neurodegenerative disorders. These aggregates are located primarily in the nucleolus and are promoted by upregulation of non-coding RNAs expressed from the intergenic spacer region of ribosomal DNA. We also map sites of R-loop accumulation in human cells lacking Senataxin and find higher RNA-DNA hybrids within the ribosomal DNA, peri-centromeric regions, and other intergenic sites but not at annotated protein-coding genes. These findings indicate that Senataxin loss affects the solubility of the proteome through the regulation of transcription-dependent lesions in the nucleus and the nucleolus.
Asunto(s)
ADN Helicasas , Enzimas Multifuncionales , ARN Helicasas , ARN no Traducido , Humanos , Nucléolo Celular/metabolismo , Nucléolo Celular/genética , Daño del ADN , ADN Helicasas/metabolismo , ADN Helicasas/genética , ADN Ribosómico/genética , ADN Ribosómico/metabolismo , Enzimas Multifuncionales/metabolismo , Enzimas Multifuncionales/genética , Agregado de Proteínas , Proteostasis , Estructuras R-Loop/genética , ARN Helicasas/metabolismo , ARN Helicasas/genética , ARN no Traducido/genética , ARN no Traducido/metabolismoRESUMEN
Bortezomib, a small dipeptide-like molecule, is a proteasome inhibitor used widely in the treatment of myeloma and lymphoma. This molecule reacts with threonine side chains near the center of the 20S proteasome and disrupts proteostasis by blocking enzymatic sites that are responsible for protein degradation. In this work, we use novel mass-spectrometry-based techniques to examine the influence of bortezomib on the structures and stabilities of the 20S core particle. These studies indicate that bortezomib binding dramatically favors compact 20S structures (in which the axial gate is closed) over larger structures (in which the axial gate is open)âsuppressing gate opening by factors of at least â¼400 to 1300 over the temperature range that is studied. Thus, bortezomib may also restrict degradation in the 20S proteasome by preventing substrates from entering the catalytic pore. That bortezomib influences structures at the entrance region of the pore at such a long distance (â¼65 to 75 Å) from its binding sites raises a number of interesting biophysical issues.
Asunto(s)
Bortezomib , Complejo de la Endopetidasa Proteasomal , Inhibidores de Proteasoma , Bortezomib/farmacología , Bortezomib/química , Complejo de la Endopetidasa Proteasomal/metabolismo , Complejo de la Endopetidasa Proteasomal/química , Complejo de la Endopetidasa Proteasomal/efectos de los fármacos , Inhibidores de Proteasoma/química , Inhibidores de Proteasoma/farmacología , Modelos Moleculares , Conformación Proteica/efectos de los fármacos , HumanosRESUMEN
The eukaryotic 26S proteasome controls cellular processes by degrading specific regulatory proteins. Most proteins are targeted for degradation by a signal or degron that consists of two parts: a proteasome-binding tag, typically covalently attached polyubiquitin chains, and an unstructured region that serves as the initiation region for proteasomal proteolysis. Here we have characterized how the arrangement of the two degron parts in a protein affects degradation. We found that a substrate is degraded efficiently only when its initiation region is of a certain minimal length and is appropriately separated in space from the proteasome-binding tag. Regions that are located too close or too far from the proteasome-binding tag cannot access the proteasome and induce degradation. These spacing requirements are different for a polyubiquitin chain and a ubiquitin-like domain. Thus, the arrangement and location of the proteasome initiation region affect a protein's fate and are important in selecting proteins for proteasome-mediated degradation.
Asunto(s)
Poliubiquitina/metabolismo , Complejo de la Endopetidasa Proteasomal/metabolismo , Saccharomyces cerevisiae/citología , Sitios de Unión , Catálisis , Escherichia coli/metabolismo , Proteínas de Escherichia coli/química , Proteínas de Escherichia coli/metabolismo , Humanos , Inmunoglobulinas/química , Inmunoglobulinas/metabolismo , Neurospora crassa/metabolismo , Poliubiquitina/química , Complejo de la Endopetidasa Proteasomal/química , Saccharomyces cerevisiae/metabolismo , Especificidad por SustratoRESUMEN
Mass spectrometry studies of the stability of the S. cerevisiae 20S proteasome from 11 to 55 °C reveal a series of related configurations and coupled transitions that appear to be associated with opening of the proteolytic core. We find no evidence for dissociation, and all transitions are reversible. A thermodynamic analysis indicates that configurations fall into three general types of structures: enthalpically stabilized, tightly closed (observed as the +54 to +58 charge states) configurations; high-entropy (+60 to +66) states that are proposed as precursors to pore opening; and larger (+70 to +79) partially and fully open pore structures. In the absence of the 19S regulatory unit, the mechanism for opening the 20S pore appears to involve a charge-priming process that loosens the closed-pore configuration. Only a small fraction (≤2%) of these 20S precursor configurations appear to open and thus expose the catalytic cavity.
Asunto(s)
Complejo de la Endopetidasa Proteasomal , Saccharomyces cerevisiae , Complejo de la Endopetidasa Proteasomal/química , Complejo de la Endopetidasa Proteasomal/metabolismo , Saccharomyces cerevisiae/metabolismo , ProteolisisRESUMEN
Proteins are typically targeted to the proteasome for degradation through the attachment of ubiquitin chains and the proteasome initiates degradation at a disordered region within the target protein. Yet some proteins with ubiquitin chains and disordered regions escape degradation. Here we investigate how the position of the ubiquitin chain on the target protein relative to the disordered region modulates degradation and show that the distance between the two determines whether a protein is degraded efficiently. This distance depends on the type of the degradation tag and is likely a result of the separation on the proteasome between the receptor that binds the tag and the site that engages the disordered region.
RESUMEN
The Gli proteins are the transcriptional effectors of the mammalian Hedgehog signaling pathway. In an unusual mechanism, the proteasome partially degrades or processes Gli3 in the absence of Hedgehog pathway stimulation to create a Gli3 fragment that opposes the activity of the full-length protein. In contrast, Gli1 is not processed but degraded completely, despite considerable homology with Gli3. We found that these differences in processing can be described by defining a processing signal that is composed of three parts: the zinc finger domain, an adjacent linker sequence, and a degron. Gli3 processing is inhibited when any one component of the processing signal is disrupted. We show that the zinc fingers are required for processing only as a folded structure and that the location but not the identity of the processing degron is critical. Within the linker sequence, regions of low sequence complexity play a crucial role, but other sequence features are also important. Gli1 is not processed because two components of the processing signal, the linker sequence and the degron, are ineffective. These findings provide new insights into the molecular elements that regulate Gli protein processing by the proteasome.