Training in the use of the water jet and cold atmospheric plasma jet for the decontamination of dental implants.

OBJECTIVES: Clinical trials testing new devices require prior training on dummies to minimize the "learning curve" for patients. Dentists were trained using a novel water jet device for mechanical cleaning of dental implants and with a novel cold plasma device for surface functionalisation during a simulated open flap peri-implantitis therapy. The hypothesis was that there would be a learning curve for both devices. MATERIALS AND METHODS: 11 dentists instrumented 44 implants in a dummy-fixed jaw model. The effect of the water jet treatment was assessed as stain removal and the effect of cold plasma treatment as surface wettability. Both results were analysed using photographs. To improve treatment skills, each dentist treated four implants and checked the results immediately after the treatment as feedback. RESULTS: Water jet treatment significantly improved from the first to the second implant from 62.7% to 75.3% stain removal, with no further improvement up to the fourth implant. The wettability with cold plasma application reached immediately a high level at the first implant and was unchanged to the 4th implant (mean scores 2.7 out of 3). CONCLUSION: A moderate learning curve was found for handling of the water jet but none for handling of the cold plasma. CLINICAL RELEVANCE: Scientific rational for study: Two new devices were developed for peri-implantitis treatment (Dental water jet, cold plasma). Dentists were trained in the use of these devices prior to the trial to minimize learning effects. PRINCIPAL FINDINGS: Experienced dentists learn the handling of the water jet very rapidly and for cold plasma they do not need much training. PRACTICAL IMPLICATIONS: A clinical study is in process. When the planned clinical study will be finished, we will find out, if this dummy head exercise really minimised the learning curve for these devices.

In-vitro biofilm removal from TiUnite® implant surface with an air polishing and two different plasma devices.

BACKGROUND: We investigated the efficacy of two different cold atmospheric pressure jet plasma devices (CAP09 and CAPmed) and an air polishing device with glycine powder (AP) either applied as monotherapies or combined therapies (AP + CAP09; AP + CAPmed), in microbial biofilm removal from discs with anodised titanium surface. METHODS: Discs covered with 7-day-old microbial biofilm were treated either with CAP09, CAPmed, AP, AP + CAP09 or AP + CAPmed and compared with negative and positive controls. Biofilm removal was assessed with flourescence and electron microscopy immediately after treatment and after 5 days of reincubation of the treated discs. RESULTS: Treatment with CAP09 or CAPmed did not lead to an effective biofilm removal, whereas treatment with AP detached the complete biofilm, which however regrew to baseline magnitude after 5 days of reincubation. Both combination therapies (AP + CAP09 and AP + CAPmed) achieved a complete biofilm removal immediately after cleaning. However, biofilm regrew after 5 days on 50% of the discs treated with the combination therapy. CONCLUSION: AP treatment alone can remove gross biofilm immediately from anodised titanium surfaces. However, it did not impede regrowth after 5 days, because microorganisms were probably hidden in holes and troughs, from which they could regrow, and which were inaccessible to AP. The combination of AP and plasma treatment probably removed or inactivated microorganisms also from these hard to access spots. These results were independent of the choice of plasma device.

In-Vitro Biofilm Removal Efficacy Using Water Jet in Combination with Cold Plasma Technology on Dental Titanium Implants.

Peri-implantitis-associated inflammation can lead to bone loss and implant failure. Current decontamination measures are ineffective due to the implants' complex geometry and rough surfaces providing niches for microbial biofilms. A modified water jet system (WaterJet) was combined with cold plasma technology (CAP) to achieve superior antimicrobial efficacy compared to cotton gauze treatment. Seven-day-old multi-species-contaminated titanium discs and implants were investigated as model systems. The efficacy of decontamination on implants was determined by rolling the implants over agar and determining colony-forming units supported by scanning electron microscopy image quantification of implant surface features. The inflammatory consequences of mono and combination treatments were investigated with peripheral blood mononuclear cell surface marker expression and chemokine and cytokine release profiles on titanium discs. In addition, titanium discs were assayed using fluorescence microscopy. Cotton gauze was inferior to WaterJet treatment according to all types of analysis. In combination with the antimicrobial effect of CAP, decontamination was improved accordingly. Mono and CAP-combined treatment on titanium surfaces alone did not unleash inflammation. Simultaneously, chemokine and cytokine release was dramatically reduced in samples that had benefited from additional antimicrobial effects through CAP. The combined treatment with WaterJet and CAP potently removed biofilm and disinfected rough titanium implant surfaces. At the same time, non-favorable rendering of the surface structure or its pro-inflammatory potential through CAP was not observed.

Efficiency of cold atmospheric plasma, cleaning powders and their combination for biofilm removal on two different titanium implant surfaces.

OBJECTIVES: Biofilm removal is the decisive factor for the control of peri-implantitis. Cold atmospheric pressure plasma (CAP) can become an effective aid due to its ability to destroy and to inactivate bacterial biofilm residues. This study evaluated the cleaning efficiency of CAP, and air-polishing with glycine (APG) or erythritol (APE) containing powders alone or in combination with CAP (APG + CAP, APE + CAP) on sandblasted/acid etched, and anodised titanium implant surface. MATERIALS AND METHODS: On respective titanium discs, a 7-day ex vivo human biofilm was grown. Afterwards, the samples were treated with CAP, APG, APE, APG + CAP, and APE + CAP. Sterile and untreated biofilm discs were used for verification. Directly after treatment and after 5 days of incubation in medium at 37 °C, samples were prepared for examination by fluorescence microscopy. The relative biofilm fluorescence was measured for quantitative analyses. RESULTS: Air-polishing with or without CAP removed biofilms effectively. The combination of air-polishing with CAP showed the best cleaning results compared to single treatments, even on day 5. Immediately after treatment, APE + CAP showed insignificant higher cleansing efficiency than APG + CAP. CONCLUSIONS: CAP supports mechanical cleansing and disinfection to remove and inactivate microbial biofilm on implant surfaces significantly. Here, the type of the powder was not important. The highest cleansing results were obtained on sandblasted/etched surfaces. CLINICAL RELEVANCE: Microbial residuals impede wound healing and re-osseointegration after peri-implantitis treatment. Air-polishing treatment removes biofilms very effectively, but not completely. In combination with CAP, microbial free surfaces can be achieved. The tested treatment regime offers an advantage during treatment of peri-implantitis.

Efficiency of biofilm removal by combination of water jet and cold plasma: an in-vitro study.

BACKGROUND: Peri-implantitis therapy is a major problem in implantology. Because of challenging rough implant surface and implant geometry, microorganisms can hide and survive in implant microstructures and impede debridement. We developed a new water jet (WJ) device and a new cold atmospheric pressure plasma (CAP) device to overcome these problems and investigated aspects of efficacy in vitro and safety with the aim to create the prerequisites for a clinical pilot study with these medical devices. METHODS: We compared the efficiency of a single treatment with a WJ or curette and cotton swab (CC) without or with adjunctive use of CAP (WJ + CAP, CC + CAP) to remove biofilm in vitro from rough titanium discs. Treatment efficacy was evaluated by measuring turbidity up to 72 h for bacterial re-growth or spreading of osteoblast-like cells (MG-63) after 5 days with scanning electron microscopy. With respect to application safety, the WJ and CAP instruments were examined according to basic regulations for medical devices. RESULTS: After 96 h of incubation all WJ and CC treated disks were turbid but 67% of WJ + CAP and 46% CC + CAP treated specimens were still clear. The increase in turbidity after WJ treatment was delayed by about 20 h compared to CC treatment. In combination with CAP the cell coverage significantly increased to 82% (WJ + CAP) or 72% (CC + CAP), compared to single treatment 11% (WJ) or 10% (CC). CONCLUSION: The newly developed water jet device effectively removes biofilm from rough titanium surfaces in vitro and, in combination with the new CAP device, biologically acceptable surfaces allow osteoblasts to grow. WJ in combination with CAP leads to cleaner surfaces than the usage of curette and cotton swabs with or without subsequent plasma treatment. Our next step will be a clinical pilot study with these new devices to assess the clinical healing process.

Salivary metabolites associated with a 5-year tooth loss identified in a population-based setting.

BACKGROUND: Periodontitis is among the most common chronic diseases worldwide, and it is one of the main reasons for tooth loss. Comprehensive profiling of the metabolite content of the saliva can enable the identification of novel pathways associated with periodontitis and highlight non-invasive markers to facilitate time and cost-effective screening efforts for the presence of periodontitis and the prediction of tooth loss. METHODS: We first investigated cross-sectional associations of 13 oral health variables with saliva levels of 562 metabolites, measured by untargeted mass spectrometry among a sub-sample (n = 938) of the Study of Health in Pomerania (SHIP-2) using linear regression models adjusting for common confounders. We took forward any candidate metabolite associated with at least two oral variables, to test for an association with a 5-year tooth loss over and above baseline oral health status using negative binomial regression models. RESULTS: We identified 84 saliva metabolites that were associated with at least one oral variable cross-sectionally, for a subset of which we observed robust replication in an independent study. Out of 34 metabolites associated with more than two oral variables, baseline saliva levels of nine metabolites were positively associated with a 5-year tooth loss. Across all analyses, the metabolites 2-pyrrolidineacetic acid and butyrylputrescine were the most consistent candidate metabolites, likely reflecting oral dysbiosis. Other candidate metabolites likely reflected tissue destruction and cell proliferation. CONCLUSIONS: Untargeted metabolic profiling of saliva replicated metabolic signatures of periodontal status and revealed novel metabolites associated with periodontitis and future tooth loss.

Enzymatic biofilm destabilisation to support mechanical cleansing of inserted dental implant surfaces: an in-vitro pilot study.

Peri-implantitis is caused by microbial contamination and biofilm formation on the implant surface. To achieve re-osseointegration, the microbes must be completely removed from the surface. Adjunctive to mechanical cleaning, chemical treatment with enzymes or other substances could optimise the treatment outcome. Therefore, we investigated the efficacy of different enzymes, a surfactant, and a chelator in destabilising dental polymicrobial biofilm. The biofilm destabilising effect of the glycosidases α-amylase, dextranase, DispersinB®, and lysozyme, as well as the proteinase subtilisin A, and the nuclease Benzonase®, the chelator EDTA, and the surfactant cocamidopropyl betaine were investigated on biofilms, inoculated with plaque on rough titanium discs. The test and the control solutions were incubated for 15 min at 36 °C on biofilms, and loosened biofilm mass was removed by shear stress with a shaker. Fluorescence-stained biofilms were microscopically analysed. Acceptable cell tolerability concentrations of test substances were determined by the MTT (tetrazolium dye) assay on the MG-63 cell line. A statistically significant biofilm destabilising effect of 10% was shown with lysozyme (2500 µg/ml).

Osteoblast growth, after cleaning of biofilm-covered titanium discs with air-polishing and cold plasma.

AIM: To investigate the effects of a combined biofilm removal with an optimized air polishing and a cold plasma device on cells in vitro. MATERIALS AND METHODS: A 7-day-old biofilm was removed from rough titanium discs with an air-polishing device with erythritol powder (AP) or with a cold atmospheric pressure argon plasma (CAP) device or in combination of both (AP + CAP). The removal efficacy was evaluated by subsequent cell seeding of osteoblast-like cells (MG-63). The cell spreading was analysed after 5 days of incubation by scanning electron microscopy. Separately, the surface hydrophilicity was analysed by measuring the water contact angle (WCA) of the disc for each treatment method. RESULTS: The mechanical plaque removal with AP rendered specimen conducive for cell growth, 85% of the surface was covered with cells. An advantage of the combination of AP + CAP was not detectable compared to AP (cell coverage ranged from 57% up to 75%). After sole CAP treatment, microorganisms re-grew and destroyed all cells. The WCA was reduced by all treatment methods. CONCLUSION: An AP treatment has the potential to remove biofilm from rough implant surfaces completely. In contrast to our hypothesis, the combination of plasma and AP treatment did not enhance osteoblast spreading.

Antibacterial Activity of Cold Atmospheric Pressure Argon Plasma against 78 Genetically Different (mecA, luk-P, agr or Capsular Polysaccharide Type) Staphylococcus aureus Strains.

Previous studies on the antimicrobial activity of cold atmospheric pressure argon plasma showed varying effects against mecA+ or mecA-Staphylococcus aureus strains. This observation may have important clinical and epidemiological implications. Here, the antibacterial activity of argon plasma was investigated against 78 genetically different S. aureus strains, stratified by mecA, luk-P, agr1-4, or the cell wall capsule polysaccharide types 5 and 8. kINPen09® served as the plasma source for all experiments. On agar plates, mecA+luk-P-S. aureus strains showed a decreased susceptibility against plasma compared to other S. aureus strains. This study underlines the high complexity of microbial defence against antimicrobial treatment and confirms a previously reported strain-dependent susceptibility of S. aureus to plasma treatment.

In vitro treatment of Candida albicans biofilms on denture base material with volume dielectric barrier discharge plasma (VDBD) compared with common chemical antiseptics.

OBJECTIVES: To prevent oral candidiasis, it is crucial to inactivate Candida-based biofilms on dentures. Common denture cleansing solutions cannot sufficiently inactivate Candida albicans. Therefore, we investigated the anticandidal efficacy of a physical plasma against C. albicans biofilms in vitro. MATERIALS AND METHODS: Argon or argon plasma with 1 % oxygen admixture was applied on C. albicans biofilms grown for 2, 7, or 16 days on polymethylmethacrylate discs; 0.1 % chlorhexidine digluconate (CHX) and 0.6 % sodium hypochlorite (NaOCl) solutions served as positive treatment controls. In addition, these two solutions were applied in combination with plasma for 30 min to assess potential synergistic effects. The anticandidal efficacy was determined by the number of colony forming units (CFU) in log(10) and expressed as reduction factor (RF, the difference between control and treated specimen). RESULTS: On 2-day-biofilms, plasma treatment alone or combined with 30 min CHX treatment led to significant differences of means of CFU (RF = 4.2 and RF = 4.3), clearly superior to CHX treatment alone (RF = 0.6). Plasma treatment of 7-day-or 16-day-old biofilms revealed no significant CFU reduction. The treatment of 7-day-old (RF = 1.7) and 16-day-old (RF = 1.3) biofilms was slightly more effective with NaOCl alone than with the combined treatment of NaOCl and plasma (RF = 1.6/RF = 1.9). The combination of CHX and plasma increased the RF immaterially. CONCLUSION: The use of plasma alone and in combination with antiseptics is promising anticandidal regimens for daily use on dentures when biofilms are not older than 2 days. CLINICAL RELEVANCE: Plasma could help to reduce denture-associated candidiasis.

Antimicrobial efficacy of non-thermal plasma in comparison to chlorhexidine against dental biofilms on titanium discs in vitro - proof of principle experiment.

AIM: Dental biofilms play a major role in the pathogenesis of peri-implant mucositis. Biofilm reduction is a pre-requisite for a successful therapy of peri-implant mucosal lesions. In this study, we evaluated the effect of three different plasma devices on the reduction of Streptococcus mutans (S. mutans) and multispecies human saliva biofilms. MATERIAL AND METHODS: We assessed the efficacy of three different non-thermal atmospheric pressure plasma devices against biofilms of S. mutans and saliva multispecies grown on titanium discs in vitro in comparison with a chlorhexidine digluconate (CHX) rinse. Efficacy of plasma treatment was determined by the number of colony forming units (CFU) and by scanning electron microscopy. The results were reported as reduction of CFU (CFU(untreated) -CFU(treated) ). RESULTS: The application of plasma was much more effective than CHX against biofilms. The maximum reduction of CHX was 3.36 for S. mutans biofilm and 1.50 for saliva biofilm, whereas the colony forming units (CFU) reduction of the volume dielectric barrier discharge argon plasma was 5.38 for S. mutans biofilm and 5.67 for saliva biofilm. CONCLUSIONS: Treatment of single- and multispecies dental biofilms on titanium discs with non-thermal atmospheric pressure plasma was more efficient than CHX application in vitro. Thus, the development of plasma devices for the treatment of peri-implant mucositis may be fruitful.

A three-phase in-vitro system for studying Pseudomonas aeruginosa adhesion and biofilm formation upon hydrogel contact lenses.

BACKGROUND: Pseudomonas aeruginosa is commonly associated with contact lens (CL) -related eye infections, for which bacterial adhesion and biofilm formation upon hydrogel CLs is a specific risk factor. Whilst P. aeruginosa has been widely used as a model organism for initial biofilm formation on CLs, in-vitro models that closely reproduce in-vivo conditions have rarely been presented. RESULTS: In the current investigation, a novel in-vitro biofilm model for studying the adherence of P. aeruginosa to hydrogel CLs was established. Nutritional and interfacial conditions similar to those in the eye of a CL wearer were created through the involvement of a solid:liquid and a solid:air interface, shear forces and a complex artificial tear fluid. Bioburdens varied depending on the CL material and biofilm maturation occurred after 72 h incubation. Whilst a range of biofilm morphologies were visualised including dispersed and adherent bacterial cells, aggregates and colonies embedded in extracellular polymer substances (EPS), EPS fibres, mushroom-like formations, and crystalline structures, a compact and heterogeneous biofilm morphology predominated on all CL materials. CONCLUSIONS: In order to better understand the process of biofilm formation on CLs and to test the efficacy of CL care solutions, representative in-vitro biofilm models are required. Here, we present a three-phase biofilm model that simulates the environment in the eye of a CL wearer and thus generates biofilms which resemble those commonly observed in-situ.

Effects of cold atmospheric pressure plasma and disinfecting agents on Candida albicans in root canals of extracted human teeth.

Reinfection in endodontically treated teeth is linked to the complexity of the root canal system, which is problematic to reach with conventional disinfection methods. As plasma is expected to have the ability to sanitize narrow areas, the aim of this study was to analyze the effect of cold atmospheric pressure plasma (CAP) on Candida albicans in root canals of extracted human teeth. CAP was applied as mono treatment and in combination with standard endodontic disinfectants (sodium hypochlorite, chlorhexidine and octenidine). Disinfection efficiency was evaluated as reduction of the logarithm of colony forming units per milliliter (log10 CFU/mL) supported by scanning electron microscopy as imaging technique. Plasma alone showed the highest reduction of log10 CFU, suggesting the best disinfection properties of all tested agents.

Fibroblast Growth on Zirconia Ceramic and Titanium Disks After Application with Cold Atmospheric Pressure Plasma Devices or with Antiseptics

PURPOSE: Fast wound healing after abutment connection may reduce infectious complications. Cold atmospheric pressure plasma can increase the hydrophilicity of abutment surfaces, and therefore, the cell attachment, cell density, and sealing could improve to hamper microbial penetration into the wound cavity. In this in vitro study, the effect of three different plasma devices and common antiseptics on cell growth after treatment on zircon ceramic and titanium disks was analyzed. MATERIALS AND METHODS: Specimens were treated for 5 minutes with the plasma devices kINPen 08, kINPen 09, or kINPen Chamber and for 15 minutes with the antiseptics chlorhexidine digluconate (0.2%), octenidine (0.1%), and ethanol (70%). After treatment, primary human fibroblast cells (HGF-1) were seeded and incubated for 1 and 24 hours. The cell area after 1 hour and cell density after 24 hours were analyzed by scanning electron microscopy images. RESULTS: Water contact angles of both surfaces (95/96 degrees) were significantly reduced to 26 to 36 degrees (titanium) or 9 to 28 degrees (zircon ceramic) after plasma treatment. Only on titanium, the average cell area was significantly increased after 1-hour cell incubation following kINPen 08 and kINPen 09 treatment. No significant differences between all three plasma devices and the untreated control were determined on both materials after 24 hours, whereas octenidine and chlorhexidine reduced cell surface covering. The cell density was significantly lower for all treatment regimens except octenidine on zircon ceramic compared with titanium. CONCLUSION: Plasma reduced the water contact angle and supported cell covering on titanium in the early stage. Plasma devices had no discernible influence on cell covering after 24-hour cell incubation, whereas chlorhexidine and octenidine hampered cell covering on both abutment surfaces.

Removal of naturally grown human biofilm with an atmospheric pressure plasma jet: An in-vitro study.

The removal of biofilm is a prerequisite for a successful treatment of biofilm-associated diseases. In this study, we compared the feasibility of an atmospheric pressure plasma device with a sonic powered brush to remove naturally grown supragingival biofilm from extracted teeth. Twenty-four periodontally hopeless teeth were extracted. Argon jet plasma with an oxygen admixture of 1 vol% and a sonically driven brush were used to remove biofilm with application times of 60 s, 180 s and 300 s. The treatment efficiency was assessed with light microscopy, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The highest biofilm removal rate was observed after an application time of 180 s/300 s with the sonic brush (80.4%/86.2%), plasma (75.5%/89.0%). These observations were confirmed by SEM. According to XPS analysis, plasma treatment decreased the amount of carbon and nitrogen, indicative of an extensive removal of proteins. Plasma treatment of naturally grown biofilm resulted in an effective cleaning of the tooth surface and was comparable to mechanical treatment. Treatment time had a significant influence on plaque reduction. These results showed that plasma could be a useful adjuvant treatment modality in cases where biofilm removal or reduction plays a decisive role, such as periodontitis and peri-implantitis. Plasma-treated biofilm on an extracted tooth.

Impact of cold atmospheric pressure argon plasma on antibiotic sensitivity of methicillin-resistant Staphylococcus aureus strains in vitro.

AIM: The antimicrobial activity of cold atmospheric pressure plasma (CAP), also called tissue tolerable plasma (TTP), could be a promising option to eradicate methicillin-sensitive as well as methicillin-resistant Staphylococcus aureus strains, which often colonize chronic wounds. Currently, the influence of CAP on the susceptibility of S. aureus to antibiotics is scarcely known, but could be important for treatment of wounds. Therefore, the aim of this study was to investigate whether CAP has an impact on the susceptibility of different S. aureus strains to different antibiotics. METHOD: For assessment, the agar diffusion test with different antibiotic test disks (cefuroxime, gentamicin, oxacillin, vancomycin, ciprofloxacin, co-trimoxazole, clindamycin, erythromycin) was used. Test strains were spread on agar plates and CAP treated before the antibiotic disks were placed. After 24 hours cultivation, the inhibited growth zones were measured and differences statistically evaluated. RESULTS: In most cases, CAP had a negligible influence on the susceptibility to antibiotics. For two strains, the susceptibility significantly decreased to ß-lactam antibiotics. CONCLUSION: Because CAP can influence the antibiotic susceptibility of S. aureus, before conducting combined treatment with local plasma application on wounds and systemic antibiotics, their interaction must be analysed in vitro to exclude unwanted combination effects.

Cold atmospheric plasma in combination with mechanical treatment improves osteoblast growth on biofilm covered titanium discs.

Treatment of implants with peri-implantitis is often unsuccessful, because an instrumented implant surface and residual microbial biofilm impedes re-osseointegration. The application of cold atmospheric plasma (CAP) could be a simple and effective strategy to overcome the inherent problems of peri-implantitis treatment. CAP is able to destroy and eliminate bacterial biofilms. Additionally, it increases the wettability of titanium, which supports cellular attachment. In this study, the behaviour of osteoblasts on titanium discs was analysed after treatment of bacterial biofilms with CAP, brushing, or a combination of both. A human plaque biofilm was cultured on titanium discs. Treatment with a brush (BR), 1% oxygen/argon CAP (PL), or brushing combined with CAP (BR+PL) was used to eliminate the biofilm. Discs without biofilm (C), autoclaved biofilm (AUTO) and untreated biofilm (BIO) served as controls. Subsequently, human osteoblastic cell growth (MG-63) was observed after 1 and 24 h. Biofilm remnants on BR and PL impaired osteoblastic cell development, whereas the BR+PL provided an increased area of osteoblastic cells. A five-day cell growth was only detectable on BR+PL treated discs. The combination of established brushing and CAP application may be a promising strategy to treat peri-implantitis.

Repeated applications of cold atmospheric pressure plasma does not induce resistance in Staphylococcus aureus embedded in biofilms.

INTRODUCTION: The increasing microbial resistance against antibiotics complicates the therapy of bacterial infections. Therefore new therapeutic options, particularly those causing no resistance, are of high interest. Cold atmospheric plasma is one possible option to eradicate multidrug resistant microorganisms, and so far no resistance development against physical plasma is known. METHOD: We tested 6-fold repeated plasma applications on a Staphylococcus aureus strain embedded in biofilm and compared the reduction of the colony forming units between the different treatment periods to asses a possible development of resistance. RESULT: For all treatment periods, the control biofilms were reduced by plasma in average by 1.7 log10 CFU, and decreased from 7.6 to 5.8 log10 (CFU/cm(2)) within 5 hours. The results demonstrated that repeated plasma doses not induce resistance or habituation against plasma applied within short time periods. CONCLUSION: The repeated application of cold plasma is a promising option for the treatment of infected wounds without the risk of development of resistance against plasma.

Poly (hexamethylene biguanide) adsorption on hydrogen peroxide treated Ti-Al-V alloys and effects on wettability, antimicrobial efficacy, and cytotoxicity.

An effective amount of the antiseptic agent PHMB cannot simply be placed on the surface of titanium alloys where hydrocarbons were removed by different purification procedures. Pre-treatment of Ti6Al4V specimen with 5% H2O2 in 24 h results in extra introduced -OH and -COOH groups as well as an adsorbed water film on the surface, which provide the base for the subsequent formation of a relatively stable and multi-layered PHMB film. The superficially adhering PHMB film produces no adverse effects on MG63 cells within a 48 h-cell culture, but promotes the initial attachment and spreading of the osteoblasts on the modified Ti6Al4V surface within 15 min. After direct bacterial inoculation of the active sample, the PHMB film reacts antimicrobially against Gram-positive (Staphylococcus aureus, Staphylococcus epidermidis) and Gram-negative strains (Pseudomonas aeruginosa, Escherichia coli) after surface contact. The bactericidal efficacy is only slightly reduced after using of the same specimen for re-testing the antibacterial activity. MG63 cells adhere and proliferate within 48 h on a PHMB film-containing Ti6Al4V surface, which has been pre-contaminated with S. aureus. Bacterial biofilms were only revealed in controls without PHMB.

Antimicrobial efficacy of two surface barrier discharges with air plasma against in vitro biofilms.

The treatment of infected wounds is one possible therapeutic aspect of plasma medicine. Chronic wounds are often associated with microbial biofilms which limit the efficacy of antiseptics. The present study investigates two different surface barrier discharges with air plasma to compare their efficacy against microbial biofilms with chlorhexidine digluconate solution (CHX) as representative of an important antibiofilm antiseptic. Pseudomonas aeruginosa SG81 and Staphylococcus epidermidis RP62A were cultivated on polycarbonate discs. The biofilms were treated for 30, 60, 150, 300 or 600 s with plasma or for 600 s with 0.1% CHX, respectively. After treatment, biofilms were dispensed by ultrasound and the antimicrobial effects were determined as difference in the number of the colony forming units by microbial culture. A high antimicrobial efficacy on biofilms of both plasma sources in comparison to CHX treatment was shown. The efficacy differs between the used strains and plasma sources. For illustration, the biofilms were examined under a scanning electron microscope before and after treatment. Additionally, cytotoxicity was determined by the MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay with L929 mouse fibroblast cell line. The cell toxicity of the used plasma limits its applicability on human tissue to maximally 150 s. The emitted UV irradiance was measured to estimate whether UV could limit the application on human tissue at the given parameters. It was found that the UV emission is negligibly low. In conclusion, the results support the assumption that air plasma could be an option for therapy of chronic wounds.