RESUMEN
BACKGROUND A luting agent is a dental cement used to secure a dental restoration. This study aimed to evaluate retentive strength of 50 endodontically-treated single-rooted mandibular second premolars (extracted) restored using 5 common luting (cement) agents. MATERIAL AND METHODS Fifty single-rooted mandibular second premolars with adequate root length and uniform size/shape were decoronated. After completing endodontic biomechanical preparation and obturation, root canals of all specimens were prepared to receive a cast post core. Depending upon cementation type, CPC specimens were divided in 5 groups (10 each) (Gp): Zinc phosphate (Gp ZP), polycarboxylate (Gp PC), glass ionomer (Gp GI), resin-modified glass ionomer (Gp RGI), and resin cement (Gp RC). Retentive strength was determined using the adhesive failure pull-out test. Mean/standard deviations were calculated for tensile forces (in kilograms) and differences were determined using analysis of variance (ANOVA). Multiple comparison was performed using the t test. A P value of ≤0.05 indicated a statistically significant difference. RESULTS The order of mean tensile strength from higher to lower was Gp RC (21.46) >Gp RGI (18.17) >Gp GI (16.07) >Gp ZP (15.33) >Gp PC (13.63). Differences in retentive strengths between the cements were significant (P≤0.05). Multiple-group comparisons showed that except for Gp ZP and Gp GI, all groups differed significantly from each other. CONCLUSIONS All investigated cements provided optimal retentive strengths, with wide differences between them. Resin cements should be used when CPC removal is not anticipated, while polycarboxylate or zinc phosphate should be used if CPC removal is anticipated.
Asunto(s)
Diente Premolar , Cementos Dentales , Humanos , Mandíbula , Técnica de Perno Muñón , Cementos de Ionómero Vítreo , Cementos de Resina , Resistencia a la Tracción , Ensayo de Materiales/métodos , Restauración Dental Permanente/métodos , Raíz del Diente/efectos de los fármacos , Cemento de Fosfato de ZincRESUMEN
BACKGROUND Cephalometric radiography evaluates facial skeleton development and aids in diagnosis and treatment phases (pre and post) in orthodontics. This study aimed to compare digital cephalometric tracing using a smartphone application (App), a tablet-based platform, and manual tracing in 30 orthodontic patients. MATERIAL AND METHODS Thirty orthodontic pretreatment, criteria based, lateral cephalometric radiographs were analyzed/grouped for Steiner analysis parameters (5 skeletal, 3 dentals, 1 soft tissue) by 3 tracing methods [manual - group (Gp M), smartphone (Android - OS9) - Gp S, tablet (Apple - IOS13) - Gp T) after mandatory standardization/calibration. Measurements include 5 angular (SNA, SNB, ANB, SNMPA, SNOP), 3 linear U1NA, L1NB, U1L1, and 1 soft tissue (S line) (millimeters and degrees). Inter-examiner rating was determined using Dahlberg's test. After normality distribution testing (Shapiro-Wilk), data were analyzed using one-way analysis of variance (ANOVA) for group differences. Homogeneity of variance was verified using the Levene test. Differences were determined on probability value of (p≤0.05). RESULTS The results showed that Steiner's analysis parameters were similar in all groups with homogenous variances. Highest differences in mean values were found for L1NB, U1L1, and S line measurement, with higher values being observed in Gp S tracings. However, these differences were not statistically significant (p≤0.05). All parameters, irrespective of being measured in either degrees or millimeters, had means comparable to each other. CONCLUSIONS Smartphone and tablet-based applications produced tracings that were comparable and reliable when compared to conventional manual tracings. Standardization of images, processing, printing, and calibration of devices is important to achieve good results.
Asunto(s)
Cefalometría , Aplicaciones Móviles , Teléfono Inteligente , Humanos , Cefalometría/métodos , Masculino , Femenino , Adolescente , Computadoras de Mano , Ortodoncia/métodosRESUMEN
BACKGROUND Effective communication and patient education are important in geriatric dental care. Memory decline complicates patient adherence. This study aimed to compare verbal, audio, and video patient education material (PEM) and adherence to dental prosthetic management in edentulous patients. MATERIAL AND METHODS 90 completely/partially edentulous patients (aged 40 to 70 years), were divided (simple random) into three groups (Gp) of 30 each . A total of 68 instructions were organized into 9 learning categories. For GpVi, a 20 minute video was shot using a Sony camera (PD170), with two actors depicting related PEM information. Patients were recalled after 1 day and 7days, to recall the PEM instructions. A Denture plaque Index (DPI) determined the efficiency of the instructions at both time intervals. Frequencies, means and standard deviations were derived for each group and then compared using Chi square, paired and unpaired t test and a Neuman-Keul post hoc pairwise test. All significant differences were kept at probability t value of ≤0.05. RESULTS PEM instructions related to patient individuality, proper tongue position and miscellaneous showed poor patient recall. At 1 day interval, audio was found to have better recall than video and verbal in 5 PEM instruction categories. At 7 day interval, video showed better recall than other two groups (P≤0.05). Despite improvements in patients recall, DPI revealed better denture hygiene maintenance in patients receiving instructions through video format (P≤0.05). CONCLUSIONS For all categories, no single media was considered to be sufficient, audio produced early better recall while video influenced long term recall and better denture hygiene maintenance.
Asunto(s)
Dentaduras , Boca Edéntula , Higiene Bucal , Educación del Paciente como Asunto , Humanos , Persona de Mediana Edad , Educación del Paciente como Asunto/métodos , Femenino , Masculino , Anciano , Higiene Bucal/métodos , Higiene Bucal/educación , Adulto , Cumplimiento y Adherencia al Tratamiento , Cooperación del PacienteRESUMEN
BACKGROUND An aged population is susceptible to chronic diseases, which impacts oral surgery treatment procedures. This retrospective study aimed to evaluate the incidence of medical comorbidities in 640 oral surgery patients treated at the College of Dentistry, Jazan University. MATERIAL AND METHODS This single-center observational study investigated medical records of outpatients who visited Jazan University Dental College Hospital in a 1-year period (2018-2019). Patients’ clinical and radiographic archives were screened to obtain relevant data. Categorical and continuous variables were expressed in terms of frequency and mean values, respectively. Differences in variables were statistically analyzed using the chi-square goodness of fit and proportional test, with a probability value P≤0.05 considered significant. RESULTS Analysis of 640 patient records included records of 300 men and 340 women who underwent oral surgery, of whom 176 patients (27.5%), including 97 men and 79 women, had medical comorbidities. The most common comorbidities were endocrine disease (7.03%), cardiovascular disease (6.71%), respiratory disease (4.53%), and hematological disorders (3.43%). Individual diseases that showed higher prevalence were diabetes mellitus (4.68%), hypertension (3.43%), bronchial asthma (2.65%), and anemia (1.4%). Differences by sex were observed in many individual disorders. CONCLUSIONS Outpatients in oral surgery clinics presented a significant variance in the incidence of medical comorbidities, among which diabetes and hypertension were most common. A proper case history is the best preventive measure that helps a surgeon avert medical emergencies and post-surgical complications.
Asunto(s)
Comorbilidad , Humanos , Masculino , Femenino , Estudios Retrospectivos , Persona de Mediana Edad , Prevalencia , Adulto , Anciano , Procedimientos Quirúrgicos Orales/estadística & datos numéricos , Cirugía Bucal/estadística & datos numéricos , Hipertensión/epidemiología , Diabetes Mellitus/epidemiología , Universidades , Enfermedades Cardiovasculares/epidemiologíaRESUMEN
BACKGROUND Before insertion, chairside adjustment kits are heat sterilized for positioning and polishing dental restorations. This study aimed to evaluate the effects of 2 steam sterilization cycles on the efficacy of polishing highly translucent monolithic zirconia (HTMLZ) dental restoration material. MATERIAL AND METHODS 100 HTMLZ disc-shaped specimens were adjusted (grinding, finishing, polishing) with EVE Diacera kit. Two steam sterilization techniques [standard (Gp S), immediate/flash (Gp (F)] of CAK were further subgrouped based on number of sterilization cycles [cycle 1 (control), cycle 5, 10, 15, and 20 (experimental)] (n=10 each). Each subgroup accordingly was evaluated for average surface roughness (Ra) and root mean square roughness (Rq) using a profilometer. Mean and standard deviation of 5 subgroups were statistically analyzed using one-way ANOVA/post hoc Tukey's test. Scanning electron microscopy complemented Ra, Rq measurements. Statistical differences of P≤0.05 were considered significant. RESULTS HTMLZ specimens in both groups showed increased (Ra/Rq) values after repeated sterilization of EVE Diacera kit, with Gp F showing lesser increase than Gp S (20 cycles). Gp F at 10 cycles and Gp S at 15 cycles showed clinically unacceptable roughness threshold (0.25 µm). Differences between subgroups for Ra and Rq values were significant (P≤0.05) with less differences within groups observed in early cycles (1, 10). Results validate the manufacturer's recommendations of using flash sterilization/10 cycles for EVE Diacera kit. CONCLUSIONS Repeated sterilization reduces efficacy of chairside adjustment kit to produce smooth surfaces on HTMLZ. This study recommends flash sterilization to a maximum of 10 times to get the clinically acceptable results of Ra and Rq.
Asunto(s)
Materiales Dentales , Pulido Dental , Vapor , Esterilización , Propiedades de Superficie , Circonio , Esterilización/métodos , Humanos , Pulido Dental/métodos , Ensayo de Materiales/métodos , Restauración Dental Permanente/métodos , Microscopía Electrónica de Rastreo/métodosRESUMEN
BACKGROUND This study evaluated the effects of milling (CADCAM), 3D printing, preparation taper angles (10-degree and 20-degree), auxiliary retentive features (groove and box), and provisional cement types (conventional and resin-based) on the adhesive failure stress of 3-mm short provisional crowns (PC). The research was motivated by the need to understand how digital dentistry technologies impact the retention and durability of provisional crowns. MATERIAL AND METHODS A total of 160 working models (3D-printed) and PCs [80 milled (CopraTemp)/80 printed (Asiga)] were fabricated from two 10- and 20-degree typodont master models and two 20-degree 3D-printed master models (groove and box), simulating a 3 mm high all-ceramic short PC. After provisional cementation with conventional (Kerr TempBond) and resin-based (ProviTemp) cements, 16 subgroups (n=10 each) underwent thermocycling (10 000 cycles; 5-55°C) and pull-off tests on a universal testing machine. Statistical analysis was performed using one-way ANOVA and post hoc Tukey test. RESULTS Conventional cement failed at lower stress for milled (47.68 to 73.54) and printed (48.40 to 77.91) as compared to resin cement for milled (104.2 to 137.27) and printed (184.85 to 328.84), respectively, with significant differences. Increased taper and groove decreased failure load except for the printed PC/resin cement combination. Use of proximal box preparation increased retention significantly. Except for 20-degree taper cemented with conventional cement, the differences in auxiliary retentive features for milled and printed provisional crowns were statistically significant at P≤0.05. CONCLUSIONS 3D-printed PC, resin-based cement, 10-degree taper, and proximal box preparation were associated with higher retention than milled, conventional cements, 20-degree taper, and vertical groove.
Asunto(s)
Adhesivos , Cementos de Resina , Cementos de Resina/química , Ensayo de Materiales , Coronas , Impresión Tridimensional , Cementos de Ionómero Vítreo , Cementos DentalesRESUMEN
BACKGROUND Preshaded monolithic zirconia (MLZ) is reported to have high translucency. This study aimed to assess the effect of chlorhexidine gluconate (ChG) mouthwash on color and translucency parameter (TP) of 2 different preshaded MLZ dental ceramics after clinical adjustment. MATERIAL AND METHODS Two MLZ disk-shaped specimens [NPM (Nacera Pearl Multi-Shade) (n=72) and CZM (Ceramill Zolid FX Multilayer)] (n=72) were simulated for clinical adjustment, finished, and polished using 2 adjustment kits [recommended kit, third-party kit: Diasynt Plus and SUN (n=12 each)] and later immersed in ChG mouthwash (Avohex) for 2 weeks. Difference in color (ΔE) and TP (Y) were calculated using the CIELab formula after measuring the coordinates (Lab) with a colorimeter. Individual changes in color and TP were assessed on the Clinical acceptance (perceptible) threshold (CAT/CPT) and Translucency perception threshold (TPT), respectively. Differences between the 2 ceramics were assessed using one-way ANOVA and post hoc tests, with all differences considered significant at P<0.05. RESULTS NPM and CZM differed in color at baseline despite having the same Vita shade combination. Between the 2 preshaded MLZ ceramics, NPM showed significant changes in color when adjusted with a third-party kit. Chlorhexidine produced changes in color and TP that were designated as clinically perceptible (ΔE=1.0 to 3.3) on the CAT/CPT and TPT scales, irrespective of the adjustment kit used. ChG produced the least or no changes in glazed MLZ specimens. CONCLUSIONS ChG mouthwash, whenever prescribed for preshaded MLZ restoration, should be adjusted prior to final glazing to avoid clinical adjustments that adversely affects color and translucency of the restoration.
Asunto(s)
Clorhexidina , Antisépticos Bucales , Circonio , Color , Clorhexidina/farmacología , Antisépticos Bucales/farmacología , Inmersión , Ensayo de Materiales , Propiedades de Superficie , Cerámica , Porcelana DentalRESUMEN
BACKGROUND The purpose of the study was to evaluate the influence of dental implant placement at different bone levels upon the resultant postoperative peri-implant bone loss. MATERIAL AND METHODS Forty-two partially edentulous patients seeking implant-supported single-crown restorations were screened followed by segregation into 2 groups (GP), GP E (equicrestal) and GP S (subcrestal) (n=21 each). Sixty endosseous implants (30 each) (Adin Tourage-S, Israel), size 3.5/8 and 4/10 mm for mandibles, were placed using a 2-stage surgical procedure. At 4 to 6 months, straight abutments were attached followed by restoration (Vita Zahnfabrik, Germany). Crestal bone levels (mesial/distal) of implant fixtures were assessed at 5 time intervals (after surgery, and at 3, 6, 9, and 12 months) using digital radiography. Means and standard deviations were calculated, following which the differences were statistically analyzed using ANOVA at P value of <0.05. RESULTS The mean annual bone loss for GP S (1.96 mm) was higher than GP E (1.10 mm). At all studied time intervals, the bone loss for implants in GP S was higher than in GP E (P<0.05). Between time intervals, lowest bone loss was observed on the distal side in GP E (0.11 mm/6-9 month) and the highest bone loss was observed on the distal side of GP S (0.6 mm/9-12 month). Differences in the means between the 2 groups on mesial and distal sides were statistically significant at all time intervals (P<0.05). CONCLUSIONS Subcrestal implant placement was associated with more bone loss than when implants are placed at the crestal level.
Asunto(s)
Pérdida de Hueso Alveolar , Enfermedades Óseas Metabólicas , Implantes Dentales , Humanos , Prótesis e Implantes , Mandíbula/cirugía , Biometría , CoronasRESUMEN
BACKGROUND This study aimed to compare a composite resin (Duo-Shade) shade guide with Vita ceramic shades before/after chemical and autoclave sterilization. MATERIAL AND METHODS Color values (L*a*b*) were recorded directly from shade tabs of prefabricated composite resin (Brilliant NG Universal Duo-Shade) and ceramic (Vita classic) shade guide with a calibrated spectrophotometer (Vita Easy Shade Advance 4.0). Seventy-two composite resin disk samples with 6 different shades (A1/B1, A2/B2, A3/D3, A3.5/B3, A4/C4, and C2/C3) (n=12 each) were divided into 2 groups (Gp) - Gp A (Autoclave) and Gp C (Chemical) (15 cycles) - to assess their influence on respective shades. Mean values calculated the color differences (ΔE) while differences in color values (L*a*b*) were graded on the National Bureau of Standards (NBS) 6-grade scale and assessed for Clinical Acceptance/Perceptible Threshold (CAT), (CPT). All differences were considered significant if the color difference ΔE was ≥3.3. RESULTS Only 2 out of 12 Shade tabs (C2C3, A4C4) of composite resin matched to Vita shade tab C2 and C4 (ΔE ≤3.3). Both groups showed notable color differences after respective sterilization protocols, with color differences in Gp A significantly higher than Gp C (DE ³3.3). Within groups, all shades in Gp A showed remarkably different color changes, with shade C2C3 and A1B1 being denoted as clinically unacceptable. CONCLUSIONS Manufacturer-provided shade guides do not match ceramic shades as claimed and chemical sterilization using 10% Deconex was associated with less color changes than with autoclave sterilization.
Asunto(s)
Resinas Compuestas , Esterilización , Resinas Compuestas/uso terapéutico , Cerámica/uso terapéuticoRESUMEN
BACKGROUND Obturation is a crucial step in dentistry, involving the filling and sealing of a prepared root canal with sealer and core material to prevent bacterial invasion and ensure successful treatment. This study employed scanning electron microscopy to compare the effectiveness of 3 obturation techniques - single-cone technique (SCT), cold lateral compaction technique (CLCT), and continuous-wave technique (CWT) - in sealing dentin to recently introduced root canal bioceramic sealer in 30 extracted mandibular second premolars. The goal was to determine the optimal technique for minimizing gaps at the sealer-dentin interface. MATERIAL AND METHODS Thirty premolars were divided into 3 groups (n=10 each) based on obturation technique: SCT, CLCT, and CWT. All groups used CeraSeal bioceramic root canal sealer. Root samples were sectioned at apical, middle, and coronal thirds, and high-resolution scanning electron microscopy was performed to measure marginal/internal gaps. Data were analyzed using one-way ANOVA and Tukey range test, with P≤0.05 considered statistically significant. RESULTS CWT showed fewer voids at all levels, with non-significant differences within a technique. Among the techniques, SCT had the largest mean gaps at all levels [apical (5.43±0.16), middle (5.28±0.20), coronal (5.73±0.24)], while CWT had the smallest mean gaps [apical (3.02±0.19), middle (2.95±0.14), coronal (2.76±0.15)]. The differences in means between techniques were statistically significant (P≤0.05). CONCLUSIONS CWT obturation with CeraSeal root canal sealer produces fewer marginal gaps at the sealer-dentin interface.
Asunto(s)
Materiales de Obturación del Conducto Radicular , Materiales de Obturación del Conducto Radicular/farmacología , Microscopía Electrónica de Rastreo , Diente Premolar , Cavidad Pulpar , Obturación del Conducto Radicular/métodos , DentinaRESUMEN
BACKGROUND The present study aimed to compare the clinical performance and gingival sulcus width changes in partially edentulous patients using cotton and polymer gingival retraction cords. MATERIAL AND METHODS Fifty partially edentulous patients were divided into 2 groups (Gp C and Gp P) and were subjected to single crown/fixed partial denture treatment. Clinical parameters, including plaque index scores, placement time, and hemorrhage control scores, were assessed. Gingival sulcus width changes before and after retraction were evaluated using individual type 4 dental stone dies observed under an optical microscope. Statistical analysis was performed using dependent/independent t tests. RESULTS The mean placement time, hemorrhage control time, and hemorrhagic scores were lower in Gp P than in Gp C, indicating better clinical performance of polymer-based retraction cord. Both groups showed an increase in sulcus width after retraction, but Gp P had a significantly higher sulcus width (690.03±45.37) compared to Gp C (471.38±28.13). The mean difference in sulcus width between baseline and after retraction was also significantly higher in Gp P (525.84 micrometers) than in Gp C (309.11 micrometers). CONCLUSIONS The present study shows that polymer-based cords produce more sulcus width and have better clinical performance compared to cotton-based gingival retraction cords. These results suggest that the use of polymer-based retraction cords can improve the quality of dental impressions in partially edentulous patients.
Asunto(s)
Encía , Polímeros , Humanos , Coronas , HemorragiaRESUMEN
BACKGROUND The aim of this study was to assess and compare the vertical/horizontal dimensions and occlusal accuracy of non-working/opposing casts obtained from three different impression materials and 3D print cast. MATERIAL AND METHODS Dentulous Master models simulating a case of a fixed dental prosthesis were mounted on an articulator (control group). Opposing mandibular casts obtained from three different impression materialsand 3-dimensional print constituted test groups , ,and , respectively. Three points, anterior vertical (AV), posterior vertical (PV), and anteroposterior (AP) were compared for dimensional accuracy among casts. Occlusal accuracy was analyzed on Medit Link software at 3 teeth (#13, #17, and #27). After calculating means for each group, the differences were calculated at probability value of P≤0.05 using the single-sample t test, ANOVA, and Tukey test. RESULTS The dimensions were significantly different from those of the mounted master models except in Gp AL(E) and Gp AL(F) at AV dimension and Gp AL(E) at AP dimension (P>0.05). A statistically significant difference of the error of means among the 4 tested groupswere detected only at 2 dimensions (AV and PV) between the Gp AL(E) and Gp 3D-C and between Gp AL(F) and Gp 3D-C groups. Other groups showed no significant differences. CONCLUSIONS The opposing casts obtained from the extended-pour alginate and alginate alternative impression materials showed higher occlusal accuracy compared to conventional alginate and 3D printed casts.
Asunto(s)
Modelos Dentales , Impresión Tridimensional , Humanos , Alginatos , Mandíbula , Programas InformáticosRESUMEN
BACKGROUND The aim of this study was to assess the influence of maxillofacial prosthodontic rehabilitation on anxiety/depression severity in patients with rhino-orbital cerebral mucormycosis (ROCM) after maxillectomy. MATERIAL AND METHODS Sixty post-mucormycotic patients treated with maxillectomy (33 males, 27 females) were divided into 5 groups based on maxillectomy types (unilateral/bilateral, subtotal/total) and treatment given (psychotherapy/obturator/implant/orbital/ocular prosthesis). Anxiety and depression symptoms were assessed using appearance anxiety inventory (AAI) and patient health questionnaire (PHQ9). Data were collected at 4 time intervals [T0 (before prosthesis), T1 (2 weeks after prosthesis), T2 (6 months) and T3 (1 year). Frequency distribution and mean values were determined for individual group/subgroups/total cohort. Differences between groups were determined using one-way ANOVA (single-factor/Friedman's) followed by post hoc correction (Bonferroni) and t test for unequal variance with probability P value being statistically significant at <0.05. RESULTS The mean scores for appearance anxiety were 29.13±4.72 (diagnostic for existing body dysmorphic disorder) at T0, which decreased to 16.88±3.02 at T3 for the total cohort. The differences for the gender-based cohort, its various groups, and respective subgroups were significant (P<0.05) at various time intervals. The mean scores in the total cohort for depression symptom severity were 16.81±4.89 (moderately severe) at T0, which increased to 18.5±4.94 at T1, followed by reduction at T2 (12.0±4.43; moderate) and T3 (7.38±3.37; mild). Gender differences for both variables were found to be statistically significant (P<0.05). CONCLUSIONS Comprehensive rehabilitation that included a diagnosis of psychological symptoms followed by psychotherapeutic/pharmacotherapeutic/prosthodontic intervention reduced the anxiety/depression symptom levels to normal at 1 year.
Asunto(s)
COVID-19 , Mucormicosis , Masculino , Femenino , Humanos , Depresión/psicología , Prostodoncia , Ansiedad/psicologíaRESUMEN
BACKGROUND Chlorhexidine (CHX) is not prescribed as a mouthwash for long-term use; therefore, probiotic/herbal mouthwashes are being investigated. This study compared the effect of 3 commercial mouthwashes on plaque index (PI), gingival index (GI), and bleeding index (BI) in patients with chronic gingivitis. MATERIAL AND METHODS Forty-five patients (all with moderate plaque) were randomly allocated into 3 groups (Gp): Gp 1 (CHX), Gp 2 (Manuka), and Gp 3 (Pro-Dental). Three periodontal clinical parameters - PI, GI, and BI - were recorded at baseline and on days 7, 14, and 28. An oral hygiene maintenance program was followed by a double-blinded intervention (coded bottle containing mouthwash). Both inter-group and intra-group comparisons were made using analysis of variance (ANOVA) with multiple t tests. All probable values were considered to have various levels of significance at P<0.05 or below. RESULTS All indices for all groups showed higher values (mean) at baseline, which were lower on days 7, 14, and 28. No differences in any clinical parameter at any point of time existed between Gp 1 and Gp 2. There were, however, significant differences (P<0.05) between Gp 1/Gp 3 and Gp 2/Gp 3 for all clinical parameters at all observed time periods (days 7, 14, 28). Intra-group comparison for all groups demonstrated highly significant differences between baseline values and other time points. CONCLUSIONS For managing chronic gingivitis, Manuka mouthwash is as effective as a CHX mouthwash, as there were no differences observed in any clinical parameters at any point points.
Asunto(s)
Gingivitis , Antisépticos Bucales , Clorhexidina/farmacología , Clorhexidina/uso terapéutico , Enfermedad Crónica , Índice de Placa Dental , Gingivitis/tratamiento farmacológico , Humanos , Antisépticos Bucales/farmacología , Antisépticos Bucales/uso terapéutico , Índice Periodontal , Extractos VegetalesRESUMEN
BACKGROUND The ratio between a tooth root and its crown is an essential diagnostic parameter that determines treatment options. This radiographic study used panoramic dental radiographs or orthopantograms to measure the mean root (R)-to-crown (C) ratios (R/C) of the permanent teeth in 81 Saudi adults. MATERIAL AND METHODS A total of 81 panoramic radiographs of Saudi adult patients (40 males and 41 females) previously treated in the College of Dentistry, Saudi Arabia, aged 16-35 years, were selected. The crown height and root length for each tooth were measured on the digital panoramic radiographs. The correlation coefficient (intra-class) was calculated to assess the intra-examiner reproducibility and a good agreement was achieved (ICC=0.79-0.89). RESULTS For both males and females, the highest mean R/C ratio was for maxillary canine (1.91) and for mandibular second premolar (2.0) while the lowest R/C ratio was for maxillary first molar (1.64) and for mandibular central incisor (1.59). Except for the maxillary second premolar, no significant differences in R/C ratios were observed for maxillary arch. In the mandibular arch, the R/C ratio for lateral incisor, both premolars, and molars differed significantly (P<0.05). Among males, statistically significant differences between teeth existed in R/C ratios for central and lateral incisors, second premolar, and both molars (P>0.05). For females, significant differences between teeth in R/C ratios were observed for both premolars and both molars (P>0.05). CONCLUSIONS This study supports the findings from previous studies that orthopantograms can be used to calculate root/crown ratios, which varies between males and females and the dental arch among Saudi adults.
Asunto(s)
Dentición Permanente , Radiografía Panorámica/métodos , Corona del Diente/diagnóstico por imagen , Adolescente , Adulto , Femenino , Estudios de Seguimiento , Humanos , Masculino , Reproducibilidad de los Resultados , Estudios Retrospectivos , Arabia Saudita , Adulto JovenRESUMEN
AIM: Post and core procedures are important clinical methods in routine dental practice. The present research aimed to radiographically assess the quality of post seating performed by undergraduate students at the College of Dentistry, Jazan University. MATERIALS AND METHODS: A total of 343 periapical X-rays of cemented posts (170 from males and 173 from females) were assessed. The assessment covered tooth type, arch, gender, type of post, length of post in relation to the crown and root lengths, the presence of any abnormality in post space, status of the remaining gutta-percha (GP), and the presence or absence of spaces between the end of post and GP. Data were analyzed using the Statistical Package for the Social Sciences (SPSS) program (version 21), and associations between variables were determined using chi-squared or Fisher's exact tests. RESULTS: Maxillary teeth were the most frequently restored with posts, and the majority (41%) comprised incisors. Similarly, glass fiber post (69%) and taper-shaped posts (86%) were the most used posts. The majority of posts (81.6%) featured a width one-thirds that of the root. Lengths of posts were twice (58%) or equal to (51%) crown and root length respectively. More than 55% of cases presented 3 to 5 mm of GP at their apical portion, and 29% reached more than 5 mm. Approximately 5 to 8% of assessed cases revealed widening of periodontal ligaments, presence of periapical pathologies, and deviation of posts from the canal wall. Most cases (75%) showed the absence of space between GP and the post end. CONCLUSION: Qualities of assessed post and core restorations conducted by the 6th year dental students were clinically acceptable. CLINICAL SIGNIFICANCE: Periodic evaluation to determine the quality of delivered treatments is a vital cue for health service authorities. This evaluation will improve quality of services and treatments provided by dental students to their patients under the supervision of the faculty. Results obtained will also provide authorities with a clear feedback about academic infrastructure.
Asunto(s)
Competencia Clínica , Técnica de Perno Muñón/normas , Estudiantes de Odontología , Adulto , Estudios Transversales , Diseño de Prótesis Dental , Fracaso de la Restauración Dental , Femenino , Gutapercha , Humanos , Masculino , Radiografía , Arabia SauditaRESUMEN
INTRODUCTION: The aim of this study was to assess the prevalence and severity of temporomandibular joint disorders (TMDs) among undergraduate medical students in the presence of khat chewing over a period of time. MATERIALS AND METHODS: Totally, 186 medical college students (age < 20 years) were randomly selected for the present study. The study subjects were divided into two groups according to age, under 20 and above 20 years. The study was based on Fonseca's anamnestic index and its questionnaire, which is composed of 10 questions and classifies the severity of TMDs. The obtained data were coded and entered into Statistical Package for the Social Sciences (SPSS) program for analysis using chi-square test at significance level of 5%. RESULTS: Most of the participants were male (68.8%) students and older than 20 years (63%). Those who reported with khat chewing comprised 31.7%. From the total samples, only 38.0% was classified as having mild TMD and 0.50% were classified as having severe TMD. Poor dental articulation, grinding of teeth, headaches, tense personalities, and temporomandibular joint (TMJ) clicking were the most common clinical findings. The mean scores showed no significant difference among gender (p < 0.29) and the khat chewing (p < 0.531) groups for the 10 questions. However, it showed significant difference among age groups (p < 0.025). CONCLUSION: The majority of subjects complained of mild TMD, while only a few cases showed a moderate TMD among different age groups. The most frequently reported dysfunctions were related to poor dental articulation and grinding of the teeth, frequent headaches, the clicking of joint, and tense personalities. No significant difference was found between gender and khat and nonkhat chewing groups. CLINICAL SIGNIFICANCE: Khat chewing is a parafunctional habit and affects dental occlusion (especially cuspal wear) in terms of anterior guidance. Such alterations in occlusion are known to be one of the causative (predisposing) factors of TMD.
Asunto(s)
Catha , Educación de Pregrado en Medicina , Masticación/fisiología , Estudiantes de Medicina/estadística & datos numéricos , Trastornos de la Articulación Temporomandibular/epidemiología , Trastornos de la Articulación Temporomandibular/etiología , Adolescente , Adulto , Factores de Edad , Bruxismo , Catha/efectos adversos , Distribución de Chi-Cuadrado , Estudios Transversales , Femenino , Cefalea , Humanos , Masculino , Personalidad , Prevalencia , Índice de Severidad de la Enfermedad , Encuestas y Cuestionarios , Adulto JovenRESUMEN
INTRODUCTION: Esthetic perceptions could differ between the dentist and his patients among various regions and cultures. AIM: The aims of this study were to evaluate the subjective differences between the dentist and the patient in terms of esthetics of metal-ceramic crowns (MCcs). The study also aims to compare the mesiodistal (MD) and buccolingual (BL) dimensions of the cemented crown with its respective natural antimeric tooth. MATERIALS AND METHODS: A total of 85 patients seeking treatment for a single crown (MC) were treated by the undergraduate students under supervision of respective academic staff. After cementation of the crowns, a 9-point questionnaire was given to patient and different dentists. A treatment cast for every single crown was poured. Then, the MD and BL dimensions of the crowns were compared against their respective antimeric tooth. RESULTS: The dentists and the patients agreed in the range of 50.5 to 90.5%. Least subjective differences were found for the length and width of the cemented crowns. The highest differences were noted for symmetry between the cemented crown and its antimeric natural tooth. A total of 31 to 38% of the patients differed from the dentist's evaluation for shade of the crown, color of the crown at the margin, contour of the crown, and the relationship of the crowns with the surrounding gingiva. The highest MD and BL dimensions were in the cemented crown of canines, while the lowest MD and BL diameters were for the cemented crowns of the lateral incisor crowns. CONCLUSION: Dentist and patient mostly agreed in terms of length (90%), width (81%) and relation of crown with free gingiva (74%). However, they differed mostly on the symmetry of the cemented crowns. The highest MD dimensions and BL diameter were in the cemented MCcs of canine, while the lowest were with lateral incisors. CLINICAL SIGNIFICANCE: While fabricating a dental prosthesis, the dentist must know about patients' perception of esthetics; otherwise both clinical and laboratory efforts would not be enough to satisfy the esthetic needs of the patient even if the restoration is technically correct. Perceptions related to symmetry differ mostly between dentist and patient.
Asunto(s)
Odontólogos/psicología , Estética Dental/psicología , Aleaciones de Cerámica y Metal , Pacientes/psicología , Cementación , Color , Estudios Transversales , Coronas , Diseño de Prótesis Dental , Encía , Humanos , Incisivo , Arabia Saudita , Encuestas y Cuestionarios , Corona del DienteRESUMEN
OBJECTIVES: Sterilization eliminates microbial viability by decreasing the biological load, but likewise have the ability to deteriorate the mechanical properties of an implant material. This study intended to evaluate the effect of repeated moist heat sterilization on implant-abutment interface using two different implant systems. MATERIALS AND METHODS: Forty screw-retained titanium implant-abutment combinations (fixture 3.5 ×10 mm, abutment 2 mm diameter), twenty each from Genesis (Aktiv Implant Systems, United States) and Bredent (SKY, Germany), were divided into four different groups (n = 10) and placed in a computer-aided diagnostic model. The abutments from each group were exposed to first and second autoclave cycle (121°C for 30 minutes), connected back to the fixture and analyzed under scanning electron microscope for marginal gap and surface roughness. RESULTS: Genesis group showed higher marginal gaps on both sides (buccal/mesial [2.8 ± 0.47]; lingual/distal [2.8 ± 0.33]), while Bredent implant-abutment system (IAS) did not show any changes in marginal gaps after autoclaving. Differences within and between the group were found to be statistically significant. Surface roughness for Genesis (243.7 ± 70.30) and Bredent groups (528.9 ± 213.19) was highest at second autoclave, with Bredent implant-abutment showing higher values for surface roughness than Genesis IAS. CONCLUSION: Marginal vertical gap increased with autoclaving for Genesis IAS, while Bredent implant abutments were more stable. Surface roughness increases with autoclaving for both Genesis and Bredent group of IAS.
RESUMEN
BACKGROUND Replicating the 3-dimensional (3D) color of natural teeth in artificial substitutes is challenging. Fixed dental prosthodontics require aesthetic, color-stable provisional restorations. Recent milling and 3D printing digital manufacturing techniques offer improved outcomes. This study assesses color stability in various digital manufacturing methods, tapers, and aging effects on anterior provisional resin restorations. MATERIAL AND METHODS Two all-ceramic tooth preparations on typodont teeth with 10° and 20° tapers were converted into experimental dies. Forty temporary crowns were manufactured using 3D printing and computer-aided design/computer-aided manufacturing (milling). Within these 2 groups, 10 crowns were cemented using a regular and clear provisional cement. All samples were thermocycled to simulate clinical use of 6 months. Color difference formula (CIEDE2000) indicated changes between before and after cementation (ΔE00) and between after cementation and after thermocycling (ΔE00[II]). The color change was considered significant in terms of clinically perceptible (ΔE00 ≤0.62) and acceptable (ΔE00 ≤2.62) changes. One-way ANOVA (P value of less than 0.05) calculated overall differences, which were established using a Fisher post hoc test. RESULTS Crowns cemented with clear cement showed fewer color changes irrespective of the manufacturing technique or taper. Notably, only the 10° 3D-printed crown with clear cement had an imperceptible color change at the pre-/post-cementation phase. Meanwhile, the 10° and 20° milled crowns with regular cement exhibited unacceptable color changes after thermocycling. CONCLUSIONS For longterm temporization in the aesthetic zone, properly optimized 3D-printed provisional restorations cemented with clear cement had better color stability.