RESUMEN
Phosphorylated cellulose can be an intrinsic flame retardant and a promising alternative for halogenated fire inhibitors. In this study, the mixture of di-ammonium hydrogen phosphate (DAP) and urea (U), containing phosphate and nitrogen groups, was applied to attain fire inhibitor properties. Functional groups of cellulose were grafted with phosphorous by keeping the constant molar ratio of 1/1.2/4.9 between anhydroglucose units of cellulose/DAP/U in different concentrations of bleached kraft pulp. Phosphorus concentrations were determined using the ICP hrOES method, and paper sheets were made using the Rapid Köthen apparatus. The tensile strength of phosphorylated cellulose increased twice compared with unmodified cellulose when the phosphorous concentration increased to 10,000 g/kg. An increase in the tensile index comes from the higher freeness of pulp and cross-linking of the phosphorous group between cellulose fibers. Remarkable fire retardancy effects were achieved in cellulose concentrations above 5 wt%. The raised phosphorous concentration above 10,000 g/kg due to the phosphorylation process caused the formation of a char layer on a cellulose surface and the nonflammable gas emission. That effect was indirectly confirmed by reducing the combustion temperature and HRR by 50 and 45%, respectively. Due to increasing phosphorus concentration in cellulose sheets, cellulose's fire and strength properties increased significantly.
RESUMEN
Starch is an inexpensive, easily accessible, and widespread natural polymer. Due to its properties and availability, this polysaccharide is an attractive precursor for sustainable products. Considering its exploitation in adhesives and coatings, the major drawback of starch is its high affinity towards water. This study aims to explain the influence of the silane-starch coating on the hydrophobic properties of paper. The analysis of the organosilicon modified starch properties showed an enhanced hydrophobic behavior, suggesting higher durability for the coatings. Molecules of silanes with short aliphatic carbon chains were easily embedded in the starch structure. Longer side chains of silanes were primarily localized on the surface of the starch structure. The best hydrophobic properties were obtained for the paper coated with the composition based on starch and methyltrimethoxysilane. This coating also improved the bursting resistance and compressive strength of the tested paper. A static contact angle higher than 115° was achieved. PDA analysis confirmed the examined material exhibited high barrier properties towards water. The results extend the knowledge of the interaction of silane compositions in the presence of starch.
Asunto(s)
Silanos , Almidón , Interacciones Hidrofóbicas e Hidrofílicas , Polímeros/química , Silanos/química , Almidón/química , AguaRESUMEN
This article describes how crystalline or fibrous nanocellulose influences the mechanical properties of paper substrate. In this context, we used commercially available cellulose nanocrystals, mechanically prepared cellulose nanofibers dispersed in water or ethanol, and carboxy cellulose nanofibers. Selective reinforcement of the paper treated with the nanocellulose samples mentioned above was observed. The change in the fibre structure was assessed using scanning electron microscopy, roentgenography, and spectroscopy techniques. In addition, the effect of nanocellulose coating on physical properties was evaluated, specifically tensile index, elongation coefficient, Elmendorf tear resistance, Bendtsen surface roughness, Bendtsen air permeability, and bending strength. It can be concluded that the observed decrease in the strength properties of the paper after applying some NC compositions is due to the loss of potential disturbances in hydrogen bonds between the nanocellulose dispersed in ethanol and the paper substrate. On the other hand, significantly increased strength was observed in the case of paper reinforced with nanocellulose functionalized with carboxyl groups.
Asunto(s)
Celulosa , Nanofibras , Papel , Celulosa/química , Etanol , Nanofibras/química , Nanopartículas/química , Agua/químicaRESUMEN
Trees of Scots pine (Pinus sylvestris L.) are known for their effective phytoextraction capabilities. The results obtained in this study point to the significant role of substrate composition and chemical characteristics in the phytoextraction potential of this species. A multi-elemental (53 elements) analysis of pines from unpolluted (soil) and polluted (post-flotation tailings) sites was performed using inductively coupled plasma optical emission spectrometry. The analyzed flotation tailings were characterized by alkaline pH (7.19 ± 0.06) and significantly higher conductivity (277.7 ± 2.9 µS cm-1) than the soil (pH = 5.11 ± 0.09; 81.3 ± 4.9 µS cm-1). The two substrates also differed with respect to the contribution of the clay fraction (0% in the unpolluted and 8% in the polluted substrate). The specimens of P. sylvestris growing on flotation tailings had significantly smaller height (381 ± 58 cm) and total aboveground biomass (4.78 ± 0.66 kg) than the trees growing in soil (699 ± 80 cm and 10.24 ± 2.10 kg). The biomass of the trunk, twigs and branches, and needles of the trees from polluted sites was between 40.0% and 48.7% of the biomass of the same organs of the control trees. Generally, the organs (trunk, twigs and branches, needles) of the P. sylvestris specimens from polluted sites had significantly higher concentrations of Au, Al, Ba, Cd, Co, La, Lu, Ni, Pd, Sc, Zn, and lower concentrations of B, Bi, Ca, Ce, Er, In, K, Mg, Na, Nd, P, Pr, Re, Se, Sr, Te than in the control plants, these metals being accumulated effectively in the whole of the aboveground biomass (BCF>1). Although the concentration of the majority of elements was significantly higher in the flotation tailings, significantly higher concentrations of these elements were observed in the tree organs from unpolluted sites, which points to the important role of substrate characteristics in the phytoextraction efficiency of P. sylvestris.
Asunto(s)
Biomasa , Pinus sylvestris/química , Pinus sylvestris/metabolismo , Contaminantes del Suelo/química , Contaminantes del Suelo/aislamiento & purificación , Contaminantes del Suelo/farmacocinética , Adsorción , Biodegradación Ambiental , Contaminación Ambiental/análisis , Floculación , Metales/análisis , Metales/aislamiento & purificación , Metales/farmacocinética , Eliminación de Residuos/métodos , Eliminación de Residuos/normas , Suelo/química , Contaminantes del Suelo/análisis , Oligoelementos/química , Oligoelementos/aislamiento & purificación , Oligoelementos/farmacocinética , Árboles/químicaRESUMEN
This article presents the results of flame-retardancy tests conducted on cellulose sheets produced using a Rapid Köthen apparatus treated with retardants. The agents used were potassium carbonate (PC) K2CO3 (concentrations of 20; 33.3; and 50% wt/wt), monoammonium phosphate (MAP) NH4H2PO4 (concentrations of 35% wt/wt), diammonium phosphate (DAP) (NH4)2HPO4 (concentrations of 42.9% wt/wt), and bisguanidal phosphate (FOS) C2H10N6 (concentrations of 22.5% wt/wt). The agents were used to improve Kraft cellulose-based sheets' flame-retardant properties and compare their performances. As part of the study, the flammability of the materials was determined by the following methods: an oxygen index (OI) test, a mass loss calorimeter (MLC) test, and a mini fire tube (MFT) test. All formulations showed an increase in flame retardancy compared to the control test. All protected samples were non-flammable for OI determinations, and DAP-protected samples showed the highest OI index. For the MLC test, DAP-protected and MAP-protected samples showed the best heat-release rate (HRR), total heat release (THR), and average heat-release rate (ARHE) (samples did not ignite for 600 s). In the MFT test, all treated samples had comparably reduced weight loss. The best parameter was achieved for MAP and DAP (15% weight loss).
RESUMEN
Modifying natural polymers with silicones gives new possibilities for packaging products and waste management. In this study, the innovative papers produced were altered following the reaction of polysaccharides and organosilicon compounds. The susceptibility of the studied material to biodegradation caused by a brown-rot fungus was assessed. Strength properties by tensile strength and dynamic mechanical analysis and hydrophobic properties by water uptake test and water contact angle analysis were evaluated. Moreover, elemental analysis by ICP method was controlled. The durability against fungi and the hydrophobic properties were increased by the modification. The fungal decay resistance of the silanized paper was reduced by water storage, which allows for managing paper waste. Cellulose-based paper treated with starch-modified methyltrimethoxysilane showed potential as a packaging material due to its reduced water uptake. Possible application areas could be corrugated boxes, cellulose thermoformed products for electronics, and food packaging. However, the water-repellent effect is limited to short-term exposure in humid conditions.
Asunto(s)
Celulosa , Polisacáridos , Celulosa/química , Almidón/química , Almidón/metabolismo , Embalaje de Alimentos/métodos , Agua , Hongos/metabolismoRESUMEN
In the presented research, two trialkoxysilanes were used to investigate their reactivity with microcrystalline cellulose (MCC) applied as a model material. As a continuation of the previous study, the research aimed at evaluation of the durability and potential reversibility of the silane treatment. Two different solvents and a mixture thereof were used for cellulose modification. The influence of amino group/pH, an excess of silanes and re-soaking with water on binding with cellulose was examined. The results obtained confirm that both selected silanes can effectively modify MCC. However, the treatment with 3-(2-aminoethylamino)propyltrimethoxysilane occurred more effective than with Methyltrimethoxysilane due to the presence of amino groups. Among the three tested solvents, the most effective was pure water. In contrast, the use of ethanol and a mixture of ethanol and water gave significantly worse results. Summarising, the presented research clearly shows how important the type of the functional group in alkoxysilanes is for its chemical reactivity with natural polymers, which is crucial for their application in waterlogged wood conservation.
RESUMEN
The inevitable destructive effects of moisture and temperature are obvious in cellulosic and nanocellulosic substrates. These materials are the main foundations of interdependent industries that produce products such as currency notes or high-quality packaging for sanitary, cosmetics, or ammunition in the defense industry. Therefore, it is essential to develop procedures to eliminate problems arising from humidity and fire to improve the quality of these green and sustainable materials. The production of waterproof and flame-resistant cellulose-based substrates has drawn increasing attention to resolve these drawbacks. In this review paper, we have initially summarized the most accessible cellulosic substrates, different kinds of nanocellulose, and the general information about water repellents and intumescent fireproof surfaces. Then, the potential and necessity of using cellulosic biobased substrates are addressed for use in modified shapes as waterproof and fire inhibitor coatings. Cost-effective, eco-friendly, and durable, dual-function coatings are also introduced as future challenges, which are exploited as water-repellents and flame-retardant cellulose-based surfaces for pulp and paper applications.
RESUMEN
Due to the wider use of nanocellulose in various areas of economic life, better and more optimal methods of obtaining nanocellulose are constantly being sought. Therefore, an attempt was made to evaluate the hybrid cellulose treatment, based on the use of a chemical method combined with an ultrasound of medium frequency. The study employs two different starting materials (Södra Black R cellulose or microcrystalline cellulose), two types of chemical pre-treatments (acid hydrolysis or oxidation), and two sonication durations. It was found that the reduction fiber cross-sectional dimensions was the result of prolonged exposure of cellulose to the ultrasound. From Södra Black R and the microcrystalline cellulose nanometer scale, structures were obtained in the form of isolated fibers. The TEMPO reagent accelerated the degradation process of two cellulose varieties due to its oxidizing character. The resulting products had nanofibrous structures. Cellulose degradation as a result of the combined action of sonication and TEMPO activity progressed gradually. Places of fiber degradation were characterized by their longitudinal breakage and initiated the next stages of the defibering process.
RESUMEN
The subject of this work was to characterize the catalytic course of the linseed oil silylation reaction with vinyltrimethoxysilane (VTMOS), carried out under elevated pressure and temperature conditions, and an explanation of the reasons for rapid gelation of the reaction product. To explain and describe the process, analytical methods were used, i.e., 1H and 13C NMR (nuclear magnetic resonance), GC-FID (gas chromatography coupled with flame ionisation detection), and GPC (gel permeation chromatography). Reaction products were monitored after 3, 6 and 12 h. The molar mass of the VTMOS-modified oil in only 3 h was comparable with the molar mass of the product obtained by conventional polymerisation. An increase in the reaction time resulted in further transformations resulting from the hydrolysis and condensation reactions taking place. In contrast to reactivity of soybean oil, the silanisation of linseed oil occurred much faster and without the need for cross-linking catalysts. The reason for the high reactivity of linseed oil to VTMOS and rapid gelation of the resulting product was primarily the amount of double bonds present in linseed oil and their high availability, in particular the double bond in the acid linolenic acid located at the C16 carbon.
RESUMEN
Ineffectiveness of the chemicals applied so far for waterlogged wood conservation created the need to develop new more, efficient and reliable agents. As an alternative, a new method with the use of organosilicon compounds differing in chemical composition and molecular weight has been investigated. The results obtained show the potential of organosilicons as consolidants in waterlogged wood conservation able to effectively stabilise wood dimensions upon drying. The best wood stabilisers were low-molecular organosilicons enable to penetrate the cell wall as well as chemicals with functional groups capable of interacting with wood polymers and forming stabilising coatings on the cell wall surface. The best anti-shrink efficiency values were obtained for (3-Mercaptopropyl)trimethoxysilane, (3-Aminopropyl)triethoxysilane, 1,3-Bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane, reaching 98, 91 and 91%, respectively. Most of the applied organosilicons reduced wood hygroscopicity, which limits the risk of further dimensional changes of wood exposed to a variable air moisture content and potentially reduces wood biodegradation. In the light of our studies, the proposed method of waterlogged wood conservation with organosilicons is potentially reversible in the case of siloxanes and amino-silanes as well as retreatable, which complies with the requirements of the conservation ethics.
RESUMEN
It can be found that reaction mechanisms and interactions between wood and organosilicone compounds have not been sufficiently explored. The aim of the study was to determine bonds formed between either cellulose or lignin and methyltrimethoxysilane (MTMOS) during a catalytic silanization reaction. Silanization was performed in the presence of two catalysts of a diverse mechanism of functionalization: aluminum acetylacetonate (Al(acac)3) and acetic acid (AcOH). For this purpose, FT-IR, 13C and 29Si NMR techniques were used. Cellulose silanization efficiency without a catalyst was unlikely. Lignin undergoes a silanization reaction with alkoxysilanes much easier than cellulose. The results showed new bonds between biopolymers and the silanising agent. The new bonds were confirmed by signals at the FT-IR spectra, e.g., 770 cm-1 and 1270 cm-1 (Si-CH3), and at the NMR signal coming from the T1, T2 and T3 structures. Efficiency of reaction was confirmed by atomic absorption spectroscopy (AAS) analysis.
RESUMEN
The objective of the paper was to estimate the fungicidal value of wood tar extracted as a product of pyrolysis of wood previously treated with either creosote oil or CCB-type salt preservative. The effectiveness of wood treated with one of these two wood tar residuals was compared to the effectiveness of wood treated with virgin creosote oil (type WEI-B) and an untreated control. Wood was impregnated with alcohol solutions of the two extracted preservatives or virgin creosote oil and then subjected to the Coniophora puteana, Poria placenta and Coriolus versicolor fungi. The fungicidal values of the investigated preservatives were determined with the use of the short agar-block method and the aging test according to the standard EN 84. It was found that wood tar extracted by pyrolysis of old creosote-treated wood and then used to treat wood may have potential as a preservative for wood protection or as a component of preservatives.