The implementation of physiological afterload during ex situ heart perfusion augments prediction of posttransplant function.

Ex situ heart perfusion (ex situ heart perfusion) is an emerging technique that aims to increase the number of organs available for transplantation by augmenting both donor heart preservation and evaluation. Traditionally, ex situ heart perfusion has been performed in an unloaded Langendorff mode, though more recently groups have begun to use pump-supported working mode (PSWM) and passive afterload working mode (PAWM) to enable contractile evaluation during ex situ heart perfusion. To this point, however, neither the predictive effectiveness of the two working modes nor the predictive power of individual contractile parameters has been analyzed. In this article, we use our previously described system to analyze the predictive relevance of a multitude of contractile parameters measured in each working mode. Ten porcine hearts were excised and perfused ex situ in Langendorff mode for 4 h, evaluated using pressure-volume catheterization in both PSWM and PAWM, and transplanted into size-matched recipient pigs. After 3 h, hearts were weaned from cardiopulmonary bypass and evaluated. When correlating posttransplant measurements to their ex situ counterparts, we report that parameters measured in both modes show sufficient power (Spearman rank coefficient > 0.7) in predicting global posttransplant function, characterized by cardiac index and preload recruitable stroke work. For the prediction of specific posttransplant systolic and diastolic function, however, a large discrepancy between the two working modes was observed. With 9 of 10 measured posttransplant parameters showing stronger correlation with counterparts measured in PAWM, it is concluded that PAWM allows for a more detailed and nuanced prediction of posttransplant function than can be made in PSWM.NEW & NOTEWORTHY Ex situ heart perfusion has been proposed as a means to augment the organ donor pool by improving organ preservation and evaluation between donation and transplantation. Using our multimodal perfusion system, we analyzed the impact of using a "passive afterload working mode" for functional evaluation as compared with the more traditional "pump-supported working mode." Our data suggests that passive afterload working mode allows for a more nuanced prediction of posttransplant function in porcine hearts.

A model to assess acute and delayed lung toxicity of oxaliplatin during in vivo lung perfusion.

OBJECTIVES: To determine the dose-limiting toxicity of oxaliplatin chemotherapy delivered by in vivo lung perfusion (IVLP). To allow assessment of subacute toxicities, we aimed to develop a 72-hour porcine IVLP survival model. METHODS: In total, 12 Yorkshire male pigs were used. Left lung IVLP was performed for 3 hours. At 72 hours postoperatively, computed tomography imaging of the lungs was performed before the pigs were killed. Lung physiology, airway dynamics, gross appearance, and histology were assessed before and during IVLP, at reperfusion, and when the pigs were euthanized. An accelerated titration dose-escalation study design was employed whereby oxaliplatin doses were sequentially doubled provided no clinically significant toxicity was observed, defined as an arterial partial pressure of oxygen to fraction of inspired oxygen ratio <300 mm Hg or severe acute lung injury on biopsy. RESULTS: After an initial training phase, no mortality or adverse events related to the procedure were observed. There was no lung injury observed at the time of IVLP for any case. At sacrifice, clinically significant lung injury was observed at 80 mg/L oxaliplatin, with an arterial partial pressure of oxygen to fraction of inspired oxygen ratio of 112 mm Hg. Mild and subclinical lung injury was observed at 40 mg/L, with this dose being repeated to confirm safety. CONCLUSIONS: A stable and reproducible porcine 3-day IVLP survival model was established that will allow toxicity assessment of agents delivered by IVLP. Oxaliplatin delivered by IVLP showed delayed-onset toxicity that was not apparent at the time of reperfusion, with a maximal-tolerated dose of 40 mg/L. This information will inform initiation of a clinical trial examining IVLP delivery of oxaliplatin at our institution.

Development, manufacturing, and preliminary validation of a reusable half-face respirator during the COVID-19 pandemic.

INTRODUCTION: The COVID-19 pandemic has led to widespread shortages of N95 respirators and other personal protective equipment (PPE). An effective, reusable, locally-manufactured respirator can mitigate this problem. We describe the development, manufacture, and preliminary testing of an open-hardware-licensed device, the "simple silicone mask" (SSM). METHODS: A multidisciplinary team developed a reusable silicone half facepiece respirator over 9 prototype iterations. The manufacturing process consisted of 3D printing and silicone casting. Prototypes were assessed for comfort and breathability. Filtration was assessed by user seal checks and quantitative fit-testing according to CSA Z94.4-18. RESULTS: The respirator originally included a cartridge for holding filter material; this was modified to connect to standard heat-moisture exchange (HME) filters (N95 or greater) after the cartridge showed poor filtration performance due to flow acceleration around the filter edges, which was exacerbated by high filter resistance. All 8 HME-based iterations provided an adequate seal by user seal checks and achieved a pass rate of 87.5% (N = 8) on quantitative testing, with all failures occurring in the first iteration. The overall median fit-factor was 1662 (100 = pass). Estimated unit cost for a production run of 1000 using distributed manufacturing techniques is CAD $15 in materials and 20 minutes of labor. CONCLUSION: Small-scale manufacturing of an effective, reusable N95 respirator during a pandemic is feasible and cost-effective. Required quantities of reusables are more predictable and less vulnerable to supply chain disruption than disposables. With further evaluation, such devices may be an alternative to disposable respirators during public health emergencies. The respirator described above is an investigational device and requires further evaluation and regulatory requirements before clinical deployment. The authors and affiliates do not endorse the use of this device at present.

Subject validation of reusable N95 stop-gap filtering facepiece respirators in COVID-19 pandemic.

INTRODUCTION: The COVID-19 pandemic has unveiled widespread shortages of personal protective equipment including N95 respirators. Several centers are developing reusable stop-gap respirators as alternatives to disposable N95 respirators during public health emergencies, using techniques such as 3D-printing, silicone moulding and plastic extrusion. Effective sealing of the mask, combined with respiratory filters should achieve 95% or greater filtration of particles less than 1um. Quantitative fit-testing (QNFT) data from these stop-gap devices has not been published to date. Our team developed one such device, the "SSM", and evaluated it using QNFT. METHODS: Device prototypes were iteratively evaluated for comfort, breathability and communication, by team members wearing them for 15-30min. The fit and seal were assessed by positive and negative pressure user seal checks. The final design was then formally tested by QNFT, according to CSA standard Z94.4-18 in 40 volunteer healthcare providers. An overall fit-factor >100 is the passing threshold. Volunteers were also tested by QNFT on disposable N95 masks which had passed qualitative fit testing (QLFT) by institutional Occupational Health and Safety Department. RESULTS: The SSM scored 3.5/5 and 4/5 for comfort and breathability. The median overall harmonic mean fit-factors of disposable N95 and SSM were 137.9 and 6316.7 respectively. SSM scored significantly higher than disposable respirators in fit-test runs and overall fit-factors (p <0.0001). Overall passing rates in disposable and SSM respirators on QNFT were 65% and 100%. During dynamic runs, passing rates in disposable and SSM respirators were 68.1% and 99.4%; harmonic means were 73.7 and 1643. CONCLUSIONS: We present the design and validation of a reusable N95 stop-gap filtering facepiece respirator that can match existent commercial respirators. This sets a precedence for adoption of novel stop-gap N95 respirators in emergency situations.