RESUMEN
Novel techniques for single-protein molecule sequencing are rapidly becoming the focus of contemporary biomedical research. Here, Brinkerhoff et al. (2021) report a significant progress in nanopore-based rereading of DNA-peptide conjugates.
Asunto(s)
Nanoporos , ADN , Nanotecnología , Proteómica , Análisis de Secuencia de ADNRESUMEN
Single-cell profiling methods have had a profound impact on the understanding of cellular heterogeneity. While genomes and transcriptomes can be explored at the single-cell level, single-cell profiling of proteomes is not yet established. Here we describe new single-molecule protein sequencing and identification technologies alongside innovations in mass spectrometry that will eventually enable broad sequence coverage in single-cell profiling. These technologies will in turn facilitate biological discovery and open new avenues for ultrasensitive disease diagnostics.
Asunto(s)
Análisis de Secuencia de Proteína/métodos , Imagen Individual de Molécula/métodos , Espectrometría de Masas/métodos , Nanotecnología , Proteínas/química , Proteómica/métodos , Análisis de Secuencia de ARN/métodos , Análisis de la Célula Individual/métodosRESUMEN
Solid-state nanopores (ssNPs) are single-molecule sensors capable of label-free quantification of different biomolecules, which have become highly versatile with the introduction of different surface treatments. By modulating the surface charges of the ssNP, the electro-osmotic flow (EOF) can be controlled in turn affecting the in-pore hydrodynamic forces. Herein, we demonstrate that negative charge surfactant coating to ssNPs generates EOF that slows-down DNA translocation speed by >30-fold, without deterioration of the NP noise, hence significantly improving its performances. Consequently, surfactant-coated ssNPs can be used to reliably sense short DNA fragments at high voltage bias. To shed light on the EOF phenomena inside planar ssNPs, we introduce visualization of the electrically neutral fluorescent molecule's flow, hence decoupling the electrophoretic from EOF forces. Finite elements simulations are then used to show that EOF is likely responsible for in-pore drag and size-selective capture rate. This study broadens ssNPs use for multianalyte sensing in a single device.
Asunto(s)
ADN , Nanoporos , Electricidad , Tensoactivos , NanotecnologíaRESUMEN
BACKGROUND: Circulating tumor DNAs (ctDNAs) are highly promising cancer biomarkers, potentially applicable for noninvasive liquid biopsy and disease monitoring. However, to date, sequencing of ctDNAs has proven to be challenging primarily due to small sample size and high background of fragmented cell-free DNAs (cfDNAs) derived from normal cells in the circulation, specifically in early stage cancer. METHODS: Solid-state nanopores (ssNPs) have recently emerged as a highly efficient tool for single-DNA sensing and analysis. Herein, we present a rapid nanopore genotyping strategy to enable an amplification-free identification and classification of ctDNA mutations. A biochemical ligation detection assay was used for the creation of specific fluorescently-labelled short DNA reporter molecules. Color conjugation with multiple fluorophores enabled a unique multi-color signature for different mutations, offering multiplexing potency. Single-molecule readout of the fluorescent labels was carried out by electro-optical sensing via solid-state nanopores drilled in titanium oxide membranes. RESULTS: As proof of concept, we utilized our method to detect the presence of low-quantity ERBB2 F310S and PIK3Ca H1047R breast cancer mutations from both plasmids and xenograft mice blood samples. We demonstrated an ability to distinguish between a wild type and a mutated sample, and between the different mutations in the same sample. CONCLUSIONS: Our method can potentially enable rapid and low cost ctDNA analysis that completely circumvents PCR amplification and library preparation. This approach will thus meet a currently unmet demand in terms of sensitivity, multiplexing and cost, opening new avenues for early diagnosis of cancer.
Asunto(s)
Neoplasias de la Mama , ADN Tumoral Circulante , Nanoporos , Animales , Biomarcadores de Tumor/genética , Neoplasias de la Mama/diagnóstico , Neoplasias de la Mama/genética , ADN Tumoral Circulante/genética , ADN de Neoplasias/genética , Femenino , Humanos , Ratones , Mutación , NucleótidosRESUMEN
We present a parallel stimulated emission depletion (STED) nanoscope with no mechanical moving parts and sub-millisecond pixel dwell times, relying on electro-optical (EO) phase modulators. The nanoscope offers 1225-fold parallelization over single-doughnut-scanning STED and achieves a spatial resolution of 35 nm. We imaged immunostained nuclear pore complexes of zebrafish within their natural biological environment, demonstrating spatial and temporal resolutions of 56 nm and 0.2 s, respectively. Furthermore, we show parallel EO-STED sub-second imaging of microtubules inside living cells. Finally, we reveal the nanodomain organization of a eukaryotic initiation factor within the processing bodies of fixed cells. The potential of parallel EO-STED to offer microsecond pixel dwell times over large fields of view promises millisecond STED imaging.
Asunto(s)
Imagen Óptica , Línea Celular , Humanos , Factores de TiempoRESUMEN
Single-molecule techniques for protein sequencing are making headway towards single-cell proteomics and are projected to propel our understanding of cellular biology and disease. Yet, single cell proteomics presents a substantial unmet challenge due to the unavailability of protein amplification techniques, and the vast dynamic-range of protein expression in cells. Here, we describe and computationally investigate the feasibility of a novel approach for single-protein identification using tri-color fluorescence and plasmonic-nanopore devices. Comprehensive computer simulations of denatured protein translocation processes through the nanopores show that the tri-color fluorescence time-traces retain sufficient information to permit pattern-recognition algorithms to correctly identify the vast majority of proteins in the human proteome. Importantly, even when taking into account realistic experimental conditions, which restrict the spatial and temporal resolutions as well as the labeling efficiency, and add substantial noise, a deep-learning protein classifier achieves 97% whole-proteome accuracies. Applying our approach for protein datasets of clinical relevancy, such as the plasma proteome or cytokine panels, we obtain ~98% correct protein identification. This study suggests the feasibility of a method for accurate and high-throughput protein identification, which is highly versatile and applicable.
Asunto(s)
Técnicas Biosensibles/métodos , Nanoporos , Proteoma/análisis , Proteómica/métodos , Proteínas Sanguíneas/análisis , Biología Computacional , Simulación por Computador , Citocinas/análisis , Bases de Datos de Proteínas , Aprendizaje Profundo , Proteínas en la Dieta/análisis , Estudios de Factibilidad , Colorantes Fluorescentes , Ensayos Analíticos de Alto Rendimiento , Humanos , Nanotecnología/métodosRESUMEN
Most functional transcription factor (TF) binding sites deviate from their 'consensus' recognition motif, although their sites and flanking sequences are often conserved across species. Here, we used single-molecule DNA unzipping with optical tweezers to study how Egr-1, a TF harboring three zinc fingers (ZF1, ZF2 and ZF3), is modulated by the sequence and context of its functional sites in the Lhb gene promoter. We find that both the core 9 bp bound to Egr-1 in each of the sites, and the base pairs flanking them, modulate the affinity and structure of the protein-DNA complex. The effect of the flanking sequences is asymmetric, with a stronger effect for the sequence flanking ZF3. Characterization of the dissociation time of Egr-1 revealed that a local, mechanical perturbation of the interactions of ZF3 destabilizes the complex more effectively than a perturbation of the ZF1 interactions. Our results reveal a novel role for ZF3 in the interaction of Egr-1 with other proteins and the DNA, providing insight on the regulation of Lhb and other genes by Egr-1. Moreover, our findings reveal the potential of small changes in DNA sequence to alter transcriptional regulation, and may shed light on the organization of regulatory elements at promoters.
Asunto(s)
ADN/química , Proteína 1 de la Respuesta de Crecimiento Precoz/química , Transcripción Genética , Secuencia de Bases , Sitios de Unión , ADN/genética , ADN/metabolismo , Proteína 1 de la Respuesta de Crecimiento Precoz/genética , Proteína 1 de la Respuesta de Crecimiento Precoz/metabolismo , Regulación de la Expresión Génica , Humanos , Cinética , Conformación de Ácido Nucleico , Pinzas Ópticas , Regiones Promotoras Genéticas , Unión Proteica , Dominios y Motivos de Interacción de Proteínas , Imagen Individual de Molécula/métodos , Especificidad por Sustrato , TermodinámicaRESUMEN
Proteins are the structural elements and machinery of cells responsible for a functioning biological architecture and homeostasis. Advances in nanotechnology are catalyzing key breakthroughs in many areas, including the analysis and study of proteins at the single-molecule level. Nanopore sensing is at the forefront of this revolution. This tutorial review provides readers a guidebook and reference for detecting and characterizing proteins at the single-molecule level using nanopores. Specifically, the review describes the key materials, nanoscale features, and design requirements of nanopores. It also discusses general design requirements as well as details on the analysis of protein translocation. Finally, the article provides the background necessary to understand current research trends and to encourage the identification of new biomedical applications for protein sensing using nanopores.
Asunto(s)
Nanoporos , Proteínas/química , HumanosRESUMEN
Solid-state nanopores are an emerging biosensor for nucleic acid and protein characterization. For use in a clinical setting, solid-state nanopore sensing requires sample preparation and purification, fluid handling, a heating element, electrical noise insulators, and an electrical readout detector, all of which hamper its translation to a point-of-care diagnostic device. A stand-alone microfluidic-based nanopore device is described that combines a bioassay reaction/purification chamber with a solid-state nanopore sensor. The microfluidic device is composed of the high-temperature/solvent resistance Zeonex plastic, formed via micro-machining and heat bonding, enabling the use of both a heat regulator and a magnetic controller. Fluid control through the microfluidic channels and chambers is controlled via fluid port selector valves and allows up-to eight different solutions. Electrical noise measurements and DNA translocation experiments demonstrate the integrity of the device, with performance comparable to a conventional stand-alone nanopore setup. However, the microfluidic-nanopore setup is superior in terms of ease of use. To showcase the utility of the device, single molecule detection of a DNA PCR product, after magnetic bead DNA separation, is accomplished on chip.
RESUMEN
Microfluidic water-in-oil droplets that serve as separate, chemically isolated compartments can be applied for single-cell analysis; however, to investigate encapsulated cells effectively over prolonged time periods, an array of droplets must remain stationary on a versatile substrate for optimal cell compatibility. We present here a platform of unique geometry and substrate versatility that generates a stationary nanodroplet array by using wells branching off a main microfluidic channel. These droplets are confined by multiple sides of a nanowell and are in direct contact with a biocompatible substrate of choice. The device is operated by a unique and reversed loading procedure that eliminates the need for fine pressure control or external tubing. Fluorocarbon oil isolates the droplets and provides soluble oxygen for the cells. By using this approach, the metabolic activity of single adherent cells was monitored continuously over time, and the concentration of viable pathogens in blood-derived samples was determined directly by measuring the number of colony-formed droplets. The method is simple to operate, requires a few microliters of reagent volume, is portable, is reusable, and allows for cell retrieval. This technology may be particularly useful for multiplexed assays for which prolonged and simultaneous visual inspection of many isolated single adherent or nonadherent cells is required.
Asunto(s)
Fibroblastos/citología , Técnicas Analíticas Microfluídicas/métodos , Análisis de la Célula Individual/métodos , Animales , Adhesión Celular , Línea Celular Tumoral , Proliferación Celular , Supervivencia Celular , Recuento de Colonia Microbiana , Humanos , Leucemia/patología , Ratones , Técnicas Analíticas Microfluídicas/instrumentación , Análisis de la Célula Individual/instrumentación , Staphylococcus aureus/citología , Staphylococcus aureus/crecimiento & desarrolloRESUMEN
Optical sensing of solid-state nanopores is a relatively new approach that can enable high-throughput, multicolor readout from a collection of nanopores. It is therefore highly attractive for applications such as nanopore-based DNA sequencing and genotyping using DNA barcodes. However, to date optical readout has been plagued by the need to achieve sufficiently high signal-to-noise ratio (SNR) for single fluorophore sensing, while still maintaining millisecond resolution. One of the main factors degrading the optical SNR in solid-state nanopores is the high photoluminescence (PL) background emanating from the silicon nitride (SiNx) membrane in which pores are commonly fabricated. Focusing on the optical properties of SiNx nanopores we show that the local membrane PL intensity is substantially reduced, and its spectrum is shifted toward shorter wavelengths with increasing e-beam dose. This phenomenon, which is correlated with a marked photocurrent enhancement in these nanopores, is utilized to perform for the first time single molecule fluorescence detection using both green and red laser excitations. Specifically, the reduction in PL and the concurrent measurement of the nanopore photocurrent enhancement allow us to maximize the background suppression and to detect a dual color, five-unit DNA barcode with high SNR levels.
Asunto(s)
ADN/química , Mediciones Luminiscentes , Membranas Artificiales , Nanoporos , Relación Señal-RuidoRESUMEN
Nanopore sensing involves an electrophoretic transport of analytes through a nanoscale pore, permitting label-free sensing at the single-molecule level. However, to date, the detection of individual small proteins has been challenging, primarily due to the poor signal/noise ratio that these molecules produce during passage through the pore. Here, we show that fine adjustment of the buffer pH, close to the isoelectric point, can be used to slow down the translocation speed of the analytes, hence permitting sensing and characterization of small globular proteins. Ubiquitin (Ub) is a small protein of 8.5 kDa, which is well conserved in all eukaryotes. Ub conjugates to proteins as a posttranslational modification called ubiquitination. The immense diversity of Ub substrates, as well as the complexity of Ub modification types and the numerous physiological consequences of these modifications, make Ub and Ub chains an interesting and challenging subject of study. The ability to detect Ub and to identify Ub linkage type at the single-molecule level may provide a novel tool for investigation in the Ub field. This is especially adequate because, for most ubiquitinated substrates, Ub modifies only a few molecules in the cell at a given time. Applying our method to the detection of mono- and poly-Ub molecules, we show that we can analyze their characteristics using nanopores. Of particular importance is that two Ub dimers that are equal in molecular weight but differ in 3D structure due to their different linkage types can be readily discriminated. Thus, to our knowledge, our method offers a novel approach for analyzing proteins in unprecedented detail using solid-state nanopores. Specifically, it provides the basis for development of single-molecule sensing of differently ubiquitinated substrates with different biological significance. Finally, our study serves as a proof of concept for approaching nanopore detection of sub-10-kDa proteins and demonstrates the ability of this method to differentiate among native and untethered proteins of the same mass.
Asunto(s)
Técnicas Biosensibles/métodos , Nanoporos , Ubiquitina/química , Técnicas Biosensibles/instrumentación , Multimerización de ProteínaRESUMEN
Three-dimensional substrates with high surface-to-volume ratios and subsequently large protein binding capacities are of interest for advanced immunosorbent assays utilizing integrated microfluidics and nanosensing elements. A library of bioactive and antifouling electrospun nanofiber substrates, which are composed of high-molecular-weight poly(oxanorbornene) derivatives, is described. Specifically, a set of copolymers are synthesized from three 7-oxanorbornene monomers to create a set of water insoluble copolymers with both biotin (bioactive) and triethylene glycol (TEG) (antifouling) functionality. Porous three-dimensional nanofiber meshes are electrospun from these copolymers with the ability to specifically bind streptavidin while minimizing the nonspecific binding of other proteins. Fluorescently labeled streptavidin is used to quantify the streptavidin binding capacity of each mesh type through confocal microscopy. A simplified enzyme-linked immunosorbent assay (ELISA) is presented to assess the protein binding capabilities and detection limits of these nanofiber meshes under both static conditions (26 h) and flow conditions (1 h) for a model target protein (i.e., mouse IgG) using a horseradish peroxidase (HRP) colorimetric assay. Bioactive and antifouling nanofiber meshes outperform traditional streptavidin-coated polystyrene plates under flow, validating their use in future advanced immunosorbent assays and their compatibility with microfluidic-based biosensors.
Asunto(s)
Ensayo de Inmunoadsorción Enzimática , Inmunoglobulina G/análisis , Nanofibras/química , Estreptavidina/análisis , Animales , Biotina/química , Colorimetría , Inmunoadsorbentes , Ratones , Técnicas Analíticas Microfluídicas , Microscopía Confocal , Tamaño de la Partícula , Polietilenglicoles/química , Polímeros/síntesis química , Polímeros/química , Porosidad , Propiedades de SuperficieRESUMEN
The field of nanopore sensing has been gaining increasing attention. Much progress has been made towards biotechnological applications that involve electrical measurements of temporal changes in the ionic current flowing through the pore. But in many cases the electrical signal is restricted by the non-ideal noise components, limited throughput, and insufficient temporal or spatial resolutions. To address these limitations, high-sensitivity optical detection techniques that complement the electrical measurements have been developed. The optical techniques involve high-bandwidth, multicolor and high-throughput measurements. Here we review the recent advancements and developments that have been taking place in the field of optical sensing in solid-state nanopores. We describe the main optical methods used in this field involving total internal reflection and confocal microscopy in addition to sophisticated background suppression strategies. We further present the phenomenon of light induced analyte manipulation at the pore and the contribution of the optical sensing approach to possible nanopore sensing applications such as optical based DNA sequencing using nanopores.
Asunto(s)
Nanoporos , Óptica y Fotónica , ADN/químicaRESUMEN
Eukaryotic translation initiation is a highly regulated process in protein synthesis. The principal translation initiation factor eIF4AI displays helicase activity, unwinding secondary structures in the mRNAs 5'-UTR. Single molecule fluorescence resonance energy transfer (sm-FRET) is applied here to directly observe and quantify the helicase activity of eIF4AI in the presence of the ancillary RNA-binding factor eIF4H. Results show that eIF4H can significantly enhance the helicase activity of eIF4AI by strongly binding both to loop structures within the RNA transcript as well as to eIF4AI. In the presence of ATP, the eIF4AI/eIF4H complex exhibits persistent rapid and repetitive cycles of unwinding and re-annealing. ATP titration assays suggest that this process consumes a single ATP molecule per cycle. In contrast, helicase unwinding activity does not occur in the presence of the non-hydrolysable analog ATP-γS. Based on our sm-FRET results, we propose an unwinding mechanism where eIF4AI/eIF4H can bind directly to loop structures to destabilize duplexes. Since eIF4AI is the prototypical example of a DEA(D/H)-box RNA helicase, it is highly likely that this unwinding mechanism is applicable to a myriad of DEAD-box helicases employed in RNA metabolism.
Asunto(s)
ARN Helicasas DEAD-box/metabolismo , Factor 4A Eucariótico de Iniciación/metabolismo , Factores Eucarióticos de Iniciación/metabolismo , Adenosina Trifosfato/metabolismo , Transferencia Resonante de Energía de Fluorescencia , Conformación de Ácido Nucleico , ARN/química , ARN/metabolismoRESUMEN
Emerging single-molecule protein sensing techniques are ushering in a transformative era in biomedical research. Nevertheless, challenges persist in realizing ultra-fast full-length protein sensing, including loss of molecular integrity due to protein fragmentation, biases introduced by antibodies affinity, identification of proteoforms, and low throughputs. Here, a single-molecule method for parallel protein separation and tracking is introduced, yielding multi-dimensional molecular properties used for their identification. Proteins are tagged by chemo-selective dual amino-acid specific labels and are electrophoretically separated by their mass/charge in custom-designed thin silicon channel with subwavelength height. This approach allows analysis of thousands of individual proteins within a few minutes by tracking their motion during the migration. The power of the method is demonstrated by quantifying a cytokine panel for host-response discrimination between viral and bacterial infections. Moreover, it is shown that two clinically-relevant splice isoforms of Vascular endothelial growth factor (VEGF) can be accurately quantified from human serum samples. Being non-destructive and compatible with full-length intact proteins, this method opens up ways for antibody-free single-protein molecule quantification.
Asunto(s)
Silicio , Factor A de Crecimiento Endotelial Vascular , Silicio/química , Humanos , Factor A de Crecimiento Endotelial Vascular/metabolismo , Proteínas/química , Proteínas/metabolismo , Imagen Individual de Molécula/métodosRESUMEN
Solid-state nanopores show promise as single-molecule sensors for biomedical applications, but to increase their resolution and efficiency, analyte molecules must remain longer in the nanopore sensing volume. Here we demonstrate a novel, facile, and customizable nanopore sensor modification that reduces the double-stranded DNA translocation velocity by 2 orders of magnitude or more via interactions outside the nanopore. This is achieved by electrospinning a copolymer nanofiber mesh (NFM) directly onto a solid-state nanopore (NP) chip. The effect of NFMs on dsDNA translocation through an NP is highlighted using a set of NFMs of varying mesh composition that reduce the translocation speed relative to a bare pore from 1- to >100-fold. A representative NFM from this set is effective on DNA as long as 20 kbp, improves the nanopore resolution, and allows discrimination among different DNA lengths.
Asunto(s)
Técnicas Biosensibles , ADN/metabolismo , Nanofibras/química , Nanoporos , ADN/químicaRESUMEN
A new single-molecule approach for rapid and purely electronic discrimination among similar genes is presented. Combining solid-state nanopores and γ-modified synthetic peptide nucleic acid probes, we accurately barcode genes by counting the number of probes attached to each gene and measuring their relative spacing. We illustrate our method by sensing individual genes from two highly similar human immunodeficiency virus subtypes, demonstrating feasibility of a novel, single-molecule diagnostic platform for rapid pathogen classification.
Asunto(s)
Código de Barras del ADN Taxonómico/métodos , Nanotecnología/métodos , Proteínas Virales/análisis , Proteínas Virales/genéticaRESUMEN
The ubiquitous and abundant cytoplasmic poly(A) binding protein (PABP) is a highly conserved multifunctional protein, many copies of which bind to the poly(A) tail of eukaryotic mRNAs to promote translation initiation. The N-terminus of PABP is responsible for the high binding specificity and affinity to poly(A), whereas the C-terminus is known to stimulate PABP multimerization on poly(A). Here, we use single-molecule nanopore force spectroscopy to directly measure interactions between poly(A) and PABPs. Both electrical and biochemical results show that the C-C domain interaction between two consecutive PABPs promotes cooperative binding. Up to now, investigators have not been able to probe the detailed polarity configuration (i.e., the internal arrangement of two PABPs on a poly(A) streak in which the C-termini face toward or away from each other). Our nanopore force spectroscopy system is able to distinguish the cooperative binding conformation from the noncooperative one. The â¼50% cooperative binding conformation of wild-type PABPs indicates that the C-C domain interaction doubles the cooperative binding probability. Moreover, the longer dissociation time of a cooperatively bound poly(A)/PABP complex as compared with a noncooperatively bound one indicates that the cooperative mode is the most stable conformation for PABPs binding onto the poly(A). However, â¼50% of the poly(A)/PABP complexes exhibit a noncooperative binding conformation, which is in line with previous studies showing that the PABP C-terminal domain also interacts with additional protein cofactors.
Asunto(s)
Nanoporos , Proteínas de Unión a Poli(A)/química , Proteínas de Unión a Poli(A)/metabolismo , ARN/metabolismo , Ensayo de Cambio de Movilidad Electroforética , Humanos , Cinética , Modelos Biológicos , Unión Proteica , Factores de TiempoRESUMEN
Nanopores have emerged as a prominent single-molecule analytic tool with particular promise for genomic applications. In this review, we discuss two potential applications of the nanopore sensors: First, we present a nanopore-based single-molecule DNA sequencing method that utilizes optical detection for massively parallel throughput. Second, we describe a method by which nanopores can be used as single-molecule genotyping tools. For DNA sequencing, the distinction among the four types of DNA nucleobases is achieved by employing a biochemical procedure for DNA expansion. In this approach, each nucleobase in each DNA strand is converted into one of four predefined unique 16-mers in a process that preserves the nucleobase sequence. The resulting converted strands are then hybridized to a library of four molecular beacons, each carrying a unique fluorophore tag, that are perfect complements to the 16-mers used for conversion. Solid-state nanopores are then used to sequentially remove these beacons, one after the other, leading to a series of photon bursts in four colors that can be optically detected. Single-molecule genotyping is achieved by tagging the DNA fragments with γ-modified synthetic peptide nucleic acid probes coupled to an electronic characterization of the complexes using solid-state nanopores. This method can be used to identify and differentiate genes with a high level of sequence similarity at the single-molecule level, but different pathology or response to treatment. We will illustrate this method by differentiating the pol gene for two highly similar human immunodeficiency virus subtypes, paving the way for a novel diagnostics platform for viral classification.