RESUMEN
Liquid crystals are widely known for their technological uses in displays, electro-optics, photonics and nonlinear optics, but these applications typically rely on defining and switching non-topological spatial patterns of the optical axis. Here, we demonstrate how a liquid crystal's optical axis patterns with singular vortex lines can robustly steer beams of light. External stimuli, including an electric field and light itself, allow us to reconfigure these unusual light-matter interactions. Periodic arrays of vortices obtained by photo-patterning enable the vortex-mediated fission of optical solitons, yielding their lightning-like propagation patterns. Predesigned patterns and spatial trajectories of vortex lines in high-birefringence liquid crystals can steer light into closed loops or even knots. Our vortex lattices might find technological uses in beam steering, telecommunications, virtual reality implementations and anticounterfeiting, as well as possibly offering a model system for probing the interaction of light with defects, including the theoretically predicted, imagination-capturing light-steering action of cosmic strings, elusive defects in cosmology.
RESUMEN
Colloidal systems are abundant in technology, in biomedical settings, and in our daily life. The so-called "colloidal atoms" paradigm exploits interparticle interactions to self-assemble colloidal analogs of atomic and molecular crystals, liquid crystal glasses, and other types of condensed matter from nanometer- or micrometer-sized colloidal building blocks. Nematic colloids, which comprise colloidal particles dispersed within an anisotropic nematic fluid host medium, provide a particularly rich variety of physical behaviors at the mesoscale, not only matching but even exceeding the diversity of structural and phase behavior in conventional atomic and molecular systems. This feature article, using primarily examples of works from our own group, highlights recent developments in the design, fabrication, and self-assembly of nematic colloidal particles, including the capabilities of preprogramming their behavior by controlling the particle's surface boundary conditions for liquid crystal molecules at the colloidal surfaces as well as by defining the shape and topology of the colloidal particles. Recent progress in defining particle-induced defects, elastic multipoles, self-assembly, and dynamics is discussed along with open issues and challenges within this research field.
RESUMEN
Pancharatnam-Berry phase optical elements (PBOEs) have received much attention due to their ability to generate complex structured light or to manipulate the shape of a light beam. This work demonstrates a tunable liquid crystal (LC) Pancharatnam-Berry (LCPB) lens using a simple and cost-effective PB phase hologram optical setup and thermal polymerization to form an irreversible photo-patterning alignment layer. The LCPB lens with high photo-stability supports ultra-broadband operation and provides a diffraction efficiency of â¼90% throughout the visible spectral range, achieved by applying the appropriate voltages. The LCPB lens functions as a convex or a concave lens, depending on the handedness of the circularly polarized incident light, so its image reduction and magnification functions are demonstrated, and its photo-stability is characterized. The fabrication of the proposed LC PBOEs is simpler and more cost-effective than previous methods, and the irreversible photo-patterning alignment layer that is formed by thermal polymerization allows larger operational bandwidths, supporting new applications.
RESUMEN
We propose here a novel multi-layered waveguide liquid crystal (LC) smart window with full color rendering based on a polymer-network liquid crystal system. The inserted position of three-primary-color LED light bars is specially designed, which is parallel to the LC alignment to obtain a higher difference between transparent and scattering states. The optimal matching of polymer-network LC system is experimentally achieved by comparing several groups of LC and reactive mesogen materials. The prepared smart window is measured and analyzed in detail including optical/chromatic test, morphology characterization, and actual application effect. The proposed architecture opens up new prospects of flexible color switchable ability and synchronized full-color display for smart windows without limitations of slow LC response time and complicated field sequential driving scheme.
RESUMEN
A front polarizer-free optically rewritable (ORW) liquid crystal display (LCD) has been made via a hybrid alignment configuration with dye-doped LCs. The hybrid structure consists of one optically active planar and one optically passive homeotropic alignment layer. The rewritability of the device is achieved by photo-reorienting the azo dye molecules in the active planar alignment layer. The dye is doped in LCs to function as a polarizer by following the LCs' direction via a guest-host effect so that the front polarizer can be eliminated. This makes the device more compact and easier to operate for image erasing and rewriting. The image rewriting time only requires â¼9.0 s, which is determined by the exposure energy and LC parameters. The hybrid-mode dye-doped ORW LCD devices could find applications in E-paper, transparent display, and various photonics devices.
RESUMEN
Great impact of surface plasmon polaritons (SPPs) on photorefractive effect in ZnSe/liquid crystal interface was observed and studied in dye pyrromethane 597 doped 4,4'-n-pentylcyanobiphenyl (5CB) liquid crystal (LC) cells sandwiched with ZnSe coated ITO glass plates. Locally electrostatic modification of ZnSe in charge carrier density makes possible visible light excitation of SPPs in the LC/ZnSe interfaces. A tentative physical picture of SPP mediation was proposed in elucidating associated findings, including photoinduced scattering enhancement at low electric field and then reduction at high field, stepwise up- and down-turns in exponential gain coefficient, and 2D diffraction patterns. This work may open a new way toward tunable low-loss visible excitation of SPPs for plasmonic applications, specifically for organic plasmonics.
RESUMEN
A response time as short as 5.4 ms and an exponential gain coefficient as large as 1795.0 cm(-1) were obtained in C(60) doped 4,4'-n-pentylcyanobiphenyl liquid crystal cells sandwiched with two indium tin oxide glass plates coated with nanoscale photoconductive ZnSe films, which is believed to be facilitating charge-carrier generation and transportation and, hence, to be responsible for the fast response rate. The surface-mediated photorefractive effect and the ZnSe interlayers were both behind the high gain coefficients. The two-dimensional diffraction patterns observed in our system are also discussed.
RESUMEN
Conventional ocean wave observation instruments are powered by batteries, limiting the continuous observation time. Besides, the waste of batteries brings environmental contaminations. Triboelectric nanogenerators (TENGs) can reveal ocean wave information through their electrical output, taking the triboelectric charge as the information carrier. However, charge amplification is necessary, consuming additional energy. Herein, taking the photons rather than electrons as the information carrier, we developed a fully self-powered natural light-enabled sensing system for ocean wave monitoring by coupling two rotary-freestanding sliding TENGs (RFS-TENGs) and a polymer network liquid crystal (PNLC)-triggered optical system. The natural light is modulated by the PNLC driven by ocean wave-induced friction. With the assistance of a one-way bearing, the rise and fall of the wave will trigger different RFS-TENGs to power the PNLC in different voltage drops, leading to different transmitted natural light intensities. The wave height information can be obtained through the number of pulse signals with the same trough light intensity, while the wave period can be obtained through the duration between the same two sets of pulse signals. The effectiveness of the developed sensing paradigm in practical applications was verified by flume-based experiments, with the highest accuracies of 90.7% in wave height and 99.8% in wave period.
RESUMEN
Current ocean wave observation is achieved by separate battery-powered sensing and signal transmission modules. Owing to the limited electrical supply and information channel space, the long-time span observation is restricted and only wave height and period information rather than the whole wave profile are sent back to the receiver. In this work, a self-powered ocean wave observation system was achieved by a developed polymer network liquid crystal (PNLC)-based smart reflector powered by a tailored triboelectric nanogenerator embedded with one-way overrunning clutches. The off-shore smart reflector modulated the on-shore emitted laser light, where ocean wave motion information can be revealed from the remotely detected reflected laser light without cable connections. The ocean wave rise and fall are distinguished by the developed one-way overrunning clutch, which selects the TENG to power the PNLC. Through the developed paradigm, ocean wave sensing and signal transmission can be achieved simultaneously, which is fully self-powered and free-of-cable. The flume-based self-powered ocean observation was performed with demonstrated wave height and period sensing accuracies of 92.66 and 97.32%, respectively.
RESUMEN
Air-flow sensing is essential in broad applications of weather forecasting, ocean monitoring, gas leakage alarming, and health monitoring. However, in severe environments where electrical power supply and cable connection are not available, the sensing of air flow in a self-powered way is a challenging issue. In this work, we reported a tribo-induced smart reflector to achieve the self-powered wireless sensing of the air flow by combining an aerodynamics-driven triboelectric nanogenerator (TENG) and a silver-coated polymer network liquid crystal. Upon being driven by the air flow, the developed reflector performed specular and diffused reflectance without and with charging by the TENG, respectively, enabling wireless sensing through mechanical-electrical-optical signal conversion. In the developed sensing paradigm, the sensing module can be fully self-powered without the need of signal pre-amplification, which is electrically separated from the light source and detection modules without cable connections. The applications of self-powered wireless wind speed sensing and breath monitoring were performed to demonstrate the effectiveness of the developed paradigm toward self-powered wireless sensing nodes in the internet of things.
RESUMEN
Self-powered smart windows are desirable with the expectations of their energy-saving, weather-independent, user-controllable, and miniature performance. Recently developed solar- or thermal-powered smart windows largely depend on the weather conditions and have an extremely slow response, and only a certain portion of the saved energy can be utilized by the external circuit for mode conversion. In this work, a self-powered normally transparent smart window was developed by the conjunction of a rotary freestanding sliding triboelectric nanogenerator (RFS-TENG) and a polymer network liquid crystal (PNLC) cell. To fabricate the PNLC cell, the alignment layer with randomly distributed microdomains was constructed to encapsulate a mixture of LC polymers and nematic LCs. The opacity of the smart window exposed to an alternating electric field was considerably improved owing to the embedded microdomains and a dense web of LC polymers. The ultrahigh haziness greatly alleviates the charge density required for the LC actuation and thus enables the driving by the TENG where the charge amount is usually limited. The RFS-TENG was elaborately designed with six periodic bent triboelectric films and Ag electrodes, which presented an ultralow friction wear and met the frequency requirement to achieve the steady opacity. By harvesting the mechanical energies from ambient environments, the tribo-induced smart window can benefit a wide variety of fields, such as self-powered sunroofs, wind-driven smart farming systems etc.