Efficiency of an up-flow Anaerobic Sludge Blanket reactor coupled with an electrochemical system to remove chloramphenicol in swine wastewater.

The application and design of treatment systems in wastewater are necessary due to antibiotics' potential toxicity and resistant genes on residual effluent. This work evaluated a coupled bio-electrochemical system to reduce chloramphenicol (CAP) and chemical oxygen demand (COD) on swine wastewater (SWW). SWW characterization found CAP of <10 µg/L and 17,434 mg/L of COD. The coupled system consisted of preliminary use of an Up-flow Anaerobic Sludge Blanket Reactor (UASB) followed by electrooxidation (EO). The UASB reactor (primary stage) was operated for three months at an organic load of 8.76 kg of COD/m3d and 50 mg CAP/L as initial concentration. In EO, we carried out a 22 (time operation and intensity) factorial design with a central composite design; we tried two Ti cathodes and one anode of Ti/PbO2. Optimal conditions obtained in the EO process were 240 min of operation time and 1.51 A of current intensity. It was possible to eliminate 44% of COD and 64.2% of CAP in the preliminary stage. On bio-electrochemicals, total COD and CAP removal were 82.35 and >99.99%, respectively. This coupled system can be applied to eliminate antibiotics and other organic pollutants in agricultural, industrial, municipal, and other wastewaters.

Evaluation of different operational conditions in a microbial electrolysis cell inoculated with a pure culture of Shewanella oneidensis for hydrogen production.

Hydrogen is a promising alternative to meet the world's energy demand in the future because of its energetic characteristics. Microbial electrolysis cell (MEC) produces hydrogen from organic matter using exoelectrogenic bacteria. Shewanella oneidensis stands out for having the capacity to produce hydrogen using different electron transfer mechanisms. The present research aims to evaluate the hydrogen production efficiency in a MEC inoculated with a pure culture of S. oneidensis in different operational conditions. Since the use of a catalyst accounts for most of the MEC cost, no catalyst was used for anode or cathode. Experiments were performed in semi-continuous and batch mode using different electrodes, voltages applied, and medium in aerobic and anaerobic conditions. The highest hydrogen production rate (HPR) was 0.107 m3 of H2/m3day obtained in a semi-continuous experiment using graphite plates and stainless steel electrodes. In batch experiments, a HPR occurred at 0.7 V, with a value of 0.048 m3 of H2/m3day versus 0.037 m3 of H2/m3day with 0.9 V. HPR was higher with carbon felt electrode (0.056 m3 of H2/m3day). However, current density dropped after 38 h, with carbon felt electrodes, and did not recover. Results of the present research showed that the MEC using a pure culture of S. oneidensis can be considered an alternative for hydrogen production without using a catalyst. Also, S. oneidensis produced hydrogen in both anaerobic and aerobic conditions with low methane production. Optimization can be proposed to improve hydrogen production based on the operational conditions tested in these experiments.

Treatment of tequila distillation volatile residues by electrochemical oxidation using titanium electrodes.

Tequila production occurs in Mexico's designated area of origin, principally in the Jalisco State. Its residues are a challenge in treatment and tracking due to a lack of technology, non-economic treatments available, low environmental consciousness and incipient control from authorities. In 2021, average production was close to 1.5 million tequila litres per day with an estimated residue yield of 10-12 litres of stillage (tequila vinasses) per tequila litre produced, including volatile fractions. This research aims to reduce organic matter by electrooxidation (EO) from 5 distillation volatile residual effluents (two-stage still distillation) from three tequila distilleries, first and second-stage heads and heads and tails and second-stage non-evaporated fraction. Round 3 mm titanium (grade-1) electrodes (one anode and one cathode) were used, with fixed voltage to a value of 30 VDC at 0, 3, 6, 9 and 12 h with 75 experiments. Gas chromatography was used to analyse methanol, ethanol, acetaldehyde, ethyl acetate, n-propanol, sec-butanol, iso-butanol, n-butanol, iso-amyl, n-amyl, and ethyl lactate content. Treatment shows positive results, reducing organic matter content in all effluents in a Chemical Oxygen Demand COD range of 580-1880 mg/L.h, particularly useful in the second-stage non-evaporated fraction for water recovery.HIGHLIGHTSResidual effluent treatment is beneficial to environmental and resource sustainability.Process without adding materials achieving cleaner treated effluents.Process aimed as the final step to recover water.This process could help the Tequila industry to reach a higher sustainability level by reducing water usage and untreated residues.

Statistical optimization of arsenic removal from synthetic water by electrocoagulation system and its application with real arsenic-polluted groundwater.

Arsenic presence in the water has become one of the most concerning environmental problems. Electrocoagulation is a technology that offers several advantages over conventional treatments such as chemical coagulation. In the present work, an electrocoagulation system was optimized for arsenic removal at initial concentrations of 100 µg/L using response surface methodology. The effects of studied parameters were determined by a 23 factorial design, whereas treatment time had a positive effect and current intensity had a negative effect on arsenic removal efficiency. With a p-value of 0.1629 and a confidence of level 99%, the type of electrode material did not have a significant effect on arsenic removal. Efficiency over 90% was reached at optimal operating conditions of 0.2 A of current intensity, and 7 min of treatment time using iron as the electrode material. However, the time necessary to accomplish with OMS arsenic guideline of 10 µg/L increased from 7 to 30 min when real arsenic-contaminated groundwater with an initial concentration of 80.2 ± 3.24 µg/L was used. The design of a pilot-scale electrocoagulation reactor was determined with the capacity to meet the water requirement of a 6417 population community in Sonora, Mexico. To provide the 1.0 L/s required, an electrocoagulation reactor with a working volume of 1.79 m3, a total electrode effective surface of 701 m2, operating at a current intensity of 180 A and an operating cost of 0.0208 US$/day was proposed. Based on these results, electrocoagulation can be considered an efficient technology to treat arsenic-contaminated water and meet the drinking water quality standards.