RESUMEN
The current treatment algorithm for chronic thromboembolic pulmonary hypertension (CTEPH) as depicted in the 2022 European Society of Cardiology (ESC)/European Respiratory Society (ERS) guidelines on the diagnosis and treatment of pulmonary hypertension (PH) includes a multimodal approach of combinations of pulmonary endarterectomy (PEA), balloon pulmonary angioplasty (BPA) and medical therapies to target major vessel pulmonary vascular lesions, and microvasculopathy. Today, BPA of >1700 patients has been reported in the literature from centers in Asia, the US, and also Europe; many more patients have been treated outside literature reports. As BPA becomes part of routine care of patients with CTEPH, benchmarks for safe and effective care delivery become increasingly important. In light of this development, the ESC Working Group on Pulmonary Circulation and Right Ventricular Function has decided to publish a document that helps standardize BPA to meet the need of uniformity in patient selection, procedural planning, technical approach, materials and devices, treatment goals, complications including their management, and patient follow-up, thus complementing the guidelines. Delphi methodology was utilized for statements that were not evidence based. First, an anatomical nomenclature and a description of vascular lesions are provided. Second, treatment goals and definitions of complete BPA are outlined. Third, definitions of complications are presented which may be the basis for a standardized reporting in studies involving BPA. The document is intended to serve as a companion to the official ESC/ERS guidelines.
Asunto(s)
Angioplastia de Balón , Cardiología , Hipertensión Pulmonar , Embolia Pulmonar , Humanos , Hipertensión Pulmonar/etiología , Hipertensión Pulmonar/terapia , Hipertensión Pulmonar/diagnóstico , Embolia Pulmonar/complicaciones , Embolia Pulmonar/terapia , Embolia Pulmonar/diagnóstico , Circulación Pulmonar , Función Ventricular Derecha , Angioplastia de Balón/métodos , Arteria Pulmonar/cirugía , Enfermedad CrónicaRESUMEN
PURPOSE: To evaluate and compare the technical accuracy and feasibility of magnetic resonance (MR) imaging-enhanced fluoroscopic guidance and real-time MR imaging guidance for percutaneous puncture procedures in phantoms and animals. MATERIALS AND METHODS: The experimental protocol was approved by the institutional animal care and use committee. Punctures were performed in phantoms, aiming for markers (20 each for MR imaging-enhanced fluoroscopic guidance and real-time MR imaging guidance), and pigs, aiming for anatomic landmarks (10 for MR imaging-enhanced fluoroscopic guidance and five for MR imaging guidance). To guide the punctures, T1-weighted three-dimensional (3D) MR images of the phantom or pig were acquired. Additional axial and coronal T2-weighted images were used to visualize the anatomy in the animals. For MR imaging-enhanced fluoroscopic guidance, phantoms and pigs were transferred to the fluoroscopic system after initial MR imaging and C-arm computed tomography (CT) was performed. C-arm CT and MR imaging data sets were coregistered. Prototype navigation software was used to plan a puncture path with use of MR images and to superimpose it on fluoroscopic images. For real-time MR imaging, an interventional MR imaging prototype for interactive real-time section position navigation was used. Punctures were performed within the magnet bore. After completion, 3D MR imaging was performed to evaluate the accuracy of insertions. Puncture durations were compared by using the log-rank test. The Mann-Whitney U test was applied to compare the spatial errors. RESULTS: In phantoms, the mean total error was 8.6 mm ± 2.8 with MR imaging-enhanced fluoroscopic guidance and 4.0 mm ± 1.2 with real-time MR imaging guidance (P < .001). The mean puncture time was 2 minutes 10 seconds ± 44 seconds with MR imaging-enhanced fluoroscopic guidance and 37 seconds ± 14 with real-time MR imaging guidance (P < .001). In the animal study, a tolerable distance (<1 cm) between target and needle tip was observed for both MR imaging-enhanced fluoroscopic guidance and real-time MR imaging guidance. The mean total error was 7.7 mm ± 2.4 with MR imaging-enhanced fluoroscopic guidance and 7.9 mm ± 4.9 with real-time MR imaging guidance (P = .77). The mean puncture time was 5 minutes 43 seconds ± 2 minutes 7 seconds with MR imaging-enhanced fluoroscopic guidance and 5 minutes 14 seconds ± 2 minutes 25 seconds with real-time MR imaging guidance (P = .68). CONCLUSION: Both MR imaging-enhanced fluoroscopic guidance and real-time MR imaging guidance demonstrated reasonable and similar accuracy in guiding needle placement to selected targets in phantoms and animals.
Asunto(s)
Biopsia con Aguja/métodos , Fluoroscopía/métodos , Biopsia Guiada por Imagen/métodos , Imagenología Tridimensional/métodos , Imagen por Resonancia Magnética/métodos , Punciones/métodos , Animales , Sistemas de Computación , Estudios de Factibilidad , Fantasmas de Imagen , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , PorcinosRESUMEN
OBJECTIVES: To investigate the reliability of CT-angiography of the lower extremities (run-off CTA) to derive a treatment decision in patients with acute and chronic peripheral artery disease (PAD). MATERIALS AND METHODS: 314 patients referred for run-off CTA were includ-ed in this retrospective study. First, diagnostic confidence of run-off CTA to derive a treat-ment decision was assessed in an interdisciplinary vascular conference using a 2 point scale (sufficient or not sufficient diagnostic confidence) and compared with the image quality eval-uated by two readers in consensus in four different levels (abdominopelvic, thigh, calf, foot arteries). Second, reliability of treatment decision was verified in all patients undergoing re-vascularization therapy. RESULTS: Diagnostic confidence of run-off CTA to derive a treatment deci-sion was sufficient in all patients with acute and in 97% of patients (215/221) with chronic PAD, whereas the rate of run-off CTA with non-diagnostic image quality was considerably higher in the calf and foot level (acute vs. chronic; calf: 28% vs.17%; foot: 52% vs. 20%). Reliability of treatment decision was superior for patients with chronic (123/133 = 92%) than for patients with acute PAD (64/78 = 82%, P = 0.02). CONCLUSION: Run-off CTA is a reliable imaging modality for primary diag-nostic work-up of patients with acute and chronic PAD.
Asunto(s)
Angiografía/métodos , Enfermedad Arterial Periférica/diagnóstico , Tomografía Computarizada por Rayos X/métodos , Enfermedad Aguda , Enfermedad Crónica , Toma de Decisiones Clínicas , Femenino , Humanos , Procesamiento de Imagen Asistido por Computador , Masculino , Enfermedad Arterial Periférica/terapia , Reproducibilidad de los Resultados , Estudios Retrospectivos , Factores de RiesgoRESUMEN
OBJECTIVES: The aim of this study was to assess the potential for radiation dose reduction in collimated C-arm computed tomography (CACT) while maintaining the image quality of the full field of view (FFOV) acquisition. MATERIAL AND METHODS: A whole-body anthropomorphic phantom representing a 70-kg male was used in this study. The upper abdomen of the phantom was imaged using an angiographic system (Artis Zeego Q; Siemens Healthcare, Germany) with either the standard detector radiation dose level (RDL; D100, 360 nGy) or 14 experimental reduced RDLs ranging from 95% (D95, 342 nGy) to 30% D100 (D30, 108 nGy). Either the FFOV (craniocaudal coverage, 18 cm) or a collimated field of view (CFOV; craniocaudal coverage, 6 cm) was applied. The organ dose was measured using thermoluminescence detector dosimetry, and the mean effective dose was computed according to the recommendations by the International Commission on Radiological Protection Publication 103. To compare the CFOV and the FFOV data sets, image quality was assessed in terms of high- and low-contrast resolution by calculating the modulation transfer function using the wire method as well as the image noise, signal-to-noise ratio, and contrast-to-noise ratio using a low-contrast insert placed in the upper abdomen (Δ50 HU). RESULTS: Collimated imaging (CFOV) covering 33% of the FFOV led to an increase in the x-ray tube output of 152% for CFOV (D100; FFOV, 95.5 mGy; CFOV, 147.7 mGy) to maintain the detector dose. The mean effective dose of D100 was 6.0 mSv (male) and 6.2 mSv (female) for the FFOV and 3.7 mSv (male) and 4.1 mSv (female) for the CFOV. High-contrast resolution was comparable for all acquisition protocols (mean 10% modulation transfer function ± 95% confidence interval; FFOV, 8.8 ± 0.1 line pairs/cm; CFOV, 8.8 ± 0.1 line pairs/cm). Low-contrast resolution was superior for the CFOV compared with that for the FFOV for each RDL (D100; image noise: FFOV, 34 ± 2 HU; CFOV, 22 ± 1 HU; contrast-to-noise ratio: FFOV, 1.3 ± 0.2; CFOV, 1.8 ± 0.3). Low-contrast resolution of the standard (D100) FFOV acquisition was achieved for the CFOV at 84% D100 of the FFOV and 54% D100 of the CFOV. Therefore, collimation up to 33% of the FFOV combined with the lower detector dose allows overall reduction of a patient's radiation exposure to 33% × 84% = 28% compared with FFOV acquisition. In the upper abdomen, this results in a nearly 50% reduction of the mean effective radiation dose (male, 2.0 mSv; female, 2.2 mSv) without loss of image quality compared with the standard FFOV acquisition. CONCLUSIONS: Craniocaudal collimation in CACT should be used whenever possible to increase the image quality and reduce the patient's overall radiation exposure. Therefore, new smart acquisition protocols are required for collimated CACT to improve the trade-off between radiation exposure and image quality requirements considering the collimation used.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , Fantasmas de Imagen , Dosis de Radiación , Interpretación de Imagen Radiográfica Asistida por Computador , Tomografía Computarizada por Rayos X , Brazo/diagnóstico por imagen , Humanos , Relación Señal-RuidoRESUMEN
OBJECTIVES: The objective of this study was to compare the image quality of a standard single-source (SSS) computed tomography (CT) with that of a virtual single-source CT (VSS-CT) data set reconstructed from 2 raw data sets obtained by dual-source CT acquisition in abdominal CT to establish a radiation dose-neutral approach for the intraindividual comparison of 3 acquisition protocols at different radiation dose levels (RDLs). MATERIALS AND METHODS: An abdominal phantom representing an 80-kg male was imaged using dual-source CT (SOMATOM Definition; Siemens Healthcare) at 3 RDLs with 120 kV(p) and different tube currents (low, standard, and high milliampere-second protocol). For each RDL, raw data were obtained once in single-source mode using x-ray tube A only and 5 times in dual-source mode using different ratios for tube current of x-ray tubes A and B (same total radiation dose; A/B: 90%/10%, 80%/20%, 70%/30%, 60%/40%, 50%/50%). For each RDL, SSS-CT and 5 virtual single-source image data sets (VSS-CT50 - 90) were reconstructed. To compare SSS-CT and VSS-CT data sets, image quality was assessed in terms of high- and low-contrast performance by calculating the modulation transfer function, image noise, noise power spectrum, and, for low contrast lesion detectability, the modified multiscale structural similarity index (MS-SSIM*). A maximum decrease of Δ = 5% of image quality compared with SSS-CT was defined as acceptable, and a noninferiority analysis with Δ was performed. RESULTS: For modulation transfer function, noninferiority was observed for all VSS-CT data sets and RDL (P < 0.05). Image noise demonstrated an acceptable increase (<3.2%, P < 0.05) for each RDL and noise power spectrum showed only minor differences in the midfrequency range. The MS-SSIM* index demonstrated for the high RDL protocol a minor decrease for VSS-CT data sets (<2%, P < 0.05). For the standard and low RDL, the relative differences of the MS-SSIM* index increased and were only in 1 case above Δ (standard RDL, mean VSS-CT80 5.1%, P > 0.05). CONCLUSIONS: The image quality obtained by virtual and SSS reconstruction using equivalent total radiation exposure to the patient showed only negligible differences in image quality. Therefore, this technique might allow an intraindividual comparison of full and reduced radiation dose protocols within 1 image acquisition step by simply splitting the radiation dose between the 2 x-ray tubes of a dual-source CT.
Asunto(s)
Procesamiento de Imagen Asistido por Computador/métodos , Interpretación de Imagen Radiográfica Asistida por Computador/métodos , Imagen Radiográfica por Emisión de Doble Fotón/métodos , Tomografía Computarizada por Rayos X/métodos , Fantasmas de Imagen , Dosis de Radiación , Interfaz Usuario-ComputadorRESUMEN
OBJECTIVES: The aim of this study was to analyze the influence of the tube current-time product in multidetector computed tomography angiography on the accuracy of stenosis quantification in a phantom model of occlusive vessel disease. MATERIALS AND METHODS: Stenosed pelvic and visceral arteries were simulated using acrylic tubes (inner diameter: small, 4.0 mm; large, 6.5 mm) filled with plaque material (epoxy resin, hydroxylapatite, glass bubbles) to create different degrees of stenosis and plaque composition (calcified plaques, >1000 Hounsfield units [HU]; soft plaques, â¼50 HU; inhomogeneous plaques, 50-1000 HU). The lumen was filled with water-diluted contrast material (Iomeprol 400; Bracco Imaging, Konstanz, Germany) to increase the density to 350 HU. The vessel phantoms were inserted in an Alderson phantom and imaging was conducted on a 64-slice MDCT (Somatom Definition, Siemens, Forchheim, Germany; collimation, 0.6 mm; reconstructed slice thickness, 1 mm; 120 kVp) using 8 different image acquisition protocols (IAPs), with reference tube current-time products (IQualRef) ranging between 20 and 280 mAs (IAP20-IAP280). The signal-to-noise ratio was calculated for each IAP. The measured luminal area within a stenosis was correlated to the known value using the Kappa-Lin test (κLin). A decrease of 10% of the maximum achievable correlation was defined as substantial. The sensitivity and specificity of hemodynamically relevant stenoses (>50%) were computed. For all IAPs, the effective dose was measured with thermoluminescence dosimetry and calculated with CTEXPO 2.0 (ICRP103). RESULTS: The measured effective dose ranged from 0.8 to 10.7 mSv. The calculated effective dose was approximately 10% lower for each IAP (0.7-9.8 mSv). A total of 2592 stenosis measurements were performed. In large vessels, the correlation was almost perfect for IAP80 to IAP280 (κLin = 0.91-0.95). In comparison, overall correlation was inferior in small vessels and was substantial for IAP280 to IAP120 (κLin = 0.89-0.82). Overall, the best correlation was observed in calcified (κLin = 0.95) and soft (κLin = 0.93) plaques as compared with inhomogeneous (κLin = 0.89) plaques. A substantial decrease in the correlation was observed below IAP100 for the large vessel phantoms and IAP120 for the small vessel phantoms. The sensitivity of hemodynamically relevant stenoses was 90% to 99% for IAP20 to IAP280 and both vessel diameters, whereas the specificity decreased from 91% (IAP280) to 31% (IAP20) for the large vessel phantoms and from 81% to 25%, respectively, for the smaller vessel phantoms. CONCLUSION: In large (>6.5 mm) vessel phantoms that simulate pelvic and renal arteries, representing a high-contrast scenario, a substantial dose reduction is feasible as compared with established abdominal imaging protocols. In smaller vessel phantoms that represent intestinal arteries, the quality of luminal delineation is already limited because of the spatial resolution. Therefore, an increase in image noise can only be accepted to a smaller degree and the potential dose reduction is limited but still substantial.
Asunto(s)
Constricción Patológica/patología , Angiografía Coronaria , Fantasmas de Imagen , Radiometría , Arteria Renal/patología , Tomografía por Rayos X , Intervalos de Confianza , Constricción Patológica/diagnóstico , Hemodinámica , Humanos , Arteria Renal/diagnóstico por imagen , Sensibilidad y Especificidad , Estadística como AsuntoRESUMEN
With the introduction of MDCT with 16 or more detector rows, CTA of aortoiliac and peripheral run-off vessels has become a routine clinical tool. Rapid scan times of approximately 30 s for the entire peripheral vascular tree combined with thin slices (1-2 mm) allow high-resolution 3-D reconstruction. The short scan duration requires injection of a relatively small volume of contrast material. We recommend a monophasic contrast bolus of 100 mL Iomeprol 400 (Bracco, Italy) and 50 mL normal saline at a rate of 4 mL/s. This approach provides strong enhancement and adequate visualization of small peripheral vessels, including 93% of arteries below the knee and 84% of pedal arteries. The best synchronization of contrast bolus and scan acquisition is achieved with a table feed of 40-48 mm/s; this approach provides significantly stronger and more homogeneous enhancement along the z-axis than faster or slower approaches, and largely avoids problems associated with overriding of the bolus or venous overlay (<3%). Postprocessing of CTA datasets is crucial for adequate documentation and communication of anatomy and pathology. We prefer MIP reconstructions after bone removal and curved MPR. In a recent comparative study performed in 50 patients (958 lesions) to determine the accuracy of 16-slice CTA compared to DSA for detection of clinically relevant (>50%) stenoses, we obtained sensitivity and specificity values of 90.1-93.3% and 95.6-96.5%, respectively. Patient management decisions (conservative, intervention, or surgery) based on CTA were the same as after DSA in 49 of the 50 patients. CTA is an accurate, noninvasive alternative to DSA of the aorto-iliac and peripheral run-off arteries.
Asunto(s)
Angiografía/métodos , Enfermedades Vasculares Periféricas/diagnóstico por imagen , Tomografía Computarizada por Rayos X , Adulto , Anciano , Anciano de 80 o más Años , Angiografía de Substracción Digital , Femenino , Humanos , Pierna/irrigación sanguínea , Pierna/diagnóstico por imagen , Masculino , Persona de Mediana Edad , Intensificación de Imagen Radiográfica/métodos , Sensibilidad y EspecificidadRESUMEN
C-Arm cone-beam computed tomography (CACT), is a relatively new technique that uses data acquired with a flat-panel detector C-arm angiography system during an interventional procedure to reconstruct CT-like images. The purpose of this Technical Note is to present the technique, feasibility, and added value of CACT in five patients who underwent abdominal transarterial chemoembolization procedures. Target organs for the chemoembolizations were kidney, liver, and pancreas and a liposarcoma infiltrating the duodenum. The time for patient positioning, C-arm and system preparation, CACT raw data acquisition, and data reconstruction for a single CACT study ranged from 6 to 12 min. The volume data set produced by the workstation was interactively reformatted using maximum intensity projections and multiplanar reconstructions. As part of an angiography system CACT provided essential information on vascular anatomy, therapy endpoints, and immediate follow-up during and immediately after the abdominal interventions without patient transfer. The quality of CACT images was sufficient to influence the course of treatment. This technology has the potential to expedite any interventional procedure that requires three-dimensional information and navigation.