RESUMEN
Despite a recent shift toward methylammonium (MA)-free lead-halide perovskites for perovskite solar cells, high-efficiency formamidinium lead iodide (FAPbI3) devices still often require methylammonium chloride (MACl) as an additive, which evaporates away during the annealing process. In this article, it is shown that the residual MA+, however, triggers thermal instability. To investigate the possibility of an optimal concentration of MA+ that may improve thermal stability, the intrinsic thermal stability of pure FA, FA-rich, MA-rich, and pure MA perovskite films (FA1-xMAxPbI3, FAMA) is studied. The results show that the thermal stability of FAMA perovskites decreases with more MA+, under degradation conditions that isolate the intrinsic thermal stability of the material (i.e., without moisture and oxygen effects). X-ray diffraction (XRD), proton-transfer-reaction time-of-flight mass spectrometry (PTR-ToF-MS), photoluminescence (PL) and UV-visible spectroscopy, and depth-profiling X-ray Photoelectron Spectroscopy (XPS) are employed to show that the observed trend is mainly due to the decomposition of the MA+ cation, as opposed to other effects such as the precursor solvent and film morphologies. It is also found that the surfaces of these FAMA films are MA+ rich, although this phenomenon does not appear to affect thermal stability. Finally, it is demonstrated that this trend is unaffected by the presence of Spiro-OMeTAD atop the film, and thus solar cell devices should preserve this trend.
RESUMEN
Next-generation displays and lighting technologies require efficient optical sources that combine brightness, color purity, stability, substrate flexibility. Metal halide perovskites have potential use in a wide range of applications, for they possess excellent charge transport, bandgap tunability and, in the most promising recent optical source materials, intense and efficient luminescence. This review links metal halide perovskites' performance as efficient light emitters with their underlying materials electronic and photophysical attributes.
RESUMEN
Metal halide perovskites have demonstrated breakthrough performances as absorber and emitter materials for photovoltaic and display applications respectively. However, despite the low manufacturing cost associated with solution-based processing, the propensity for defect formation with this technique has led to an increasing need for defect passivation. Here, we present an inexpensive and facile method to remedy surface defects through a postdeposition treatment process using branched alkylammonium cation species. The simultaneous realignment of interfacial energy levels upon incorporation of tetraethylammonium bromide onto the surface of CH3 NH3 PbBr3 films contributes favorably toward the enhancement in overall light-emitting diode characteristics, achieving maximum luminance, current efficiency, and external quantum efficiency values of 11 000â cd m-2 , 0.68â cd A-1 , and 0.16 %, respectively.
RESUMEN
High photoluminescence quantum yields and narrow emission wavelengths, combined with low temperature solution processing, make CH3NH3PbBr3 nanocrystals (NCs) favorable candidates for light-emitting applications. Herein, we describe the synthesis of CH3NH3PbBr3 NC inks by a convenient room-temperature ligand assisted reprecipitation protocol. We further investigate the effect of modulation of the CH3NH3Br : PbBr2 ratio during NC synthesis on the optical properties, crystallinity, particle size distribution and film formation of the NC ink. Subsequently, we fabricate LEDs using these NCs as the emissive layer and the highest efficiency (1.75% external quantum efficiency) and brightness (>2700 cd m-2) is achieved for the 1.15 : 1 precursor ratio. It is inferred that the NC surface properties and film coverage are more crucial than the photoluminescence intensity to achieve high device efficiency. Moreover, by separating the NC synthesis and thin film formation processes, we can exert more control during device fabrication, which makes it very promising for scale-up applications.
RESUMEN
We report the high yield synthesis of about 11 nm sized CH3NH3PbBr3 nanocrystals with near-unity photoluminescence quantum yield. The nanocrystals are formed in the presence of surface-binding ligands through their direct precipitation in a benzyl alcohol/toluene phase. The benzyl alcohol plays a pivotal role in steering the surface ligands binding motifs on the NC surface, resulting in enhanced surface-trap passivation and near-unity PLQY values. We further demonstrate that thin films from purified CH3NH3PbBr3 nanocrystals are stable >4 months in air, exhibit high optical gain (about 520 cm-1), and display stable, ultralow amplified spontaneous emission thresholds of 13.9 ± 1.3 and 569.7 ± 6 µJ cm-2 at one-photon (400 nm) and two-photon (800 nm) absorption, respectively. To the best of our knowledge, the latter signifies a 5-fold reduction of the lowest reported threshold value for halide perovskite nanocrystals to date, which makes them ideal candidates for light-emitting and low-threshold lasing applications.
RESUMEN
Despite their extremely good performance in solar cells with efficiencies approaching 20% and the emerging application for light-emitting devices, organic-inorganic lead halide perovskites suffer from high content of toxic, polluting, and bioaccumulative Pb, which may eventually hamper their commercialization. Here, we present the synthesis of two-dimensional (2D) Cu-based hybrid perovskites and study their optoelectronic properties to investigate their potential application in solar cells and light-emitting devices, providing a new environmental-friendly alternative to Pb. The series (CH3NH3)2CuCl(x)Br(4-x) was studied in detail, with the role of Cl found to be essential for stabilization. By exploiting the additional Cu d-d transitions and appropriately tuning the Br/Cl ratio, which affects ligand-to-metal charge transfer transitions, the optical absorption in this series of compounds can be extended to the near-infrared for optimal spectral overlap with the solar irradiance. In situ formation of Cu(+) ions was found to be responsible for the green photoluminescence of this material set. Processing conditions for integrating Cu-based perovskites into photovoltaic device architectures, as well as the factors currently limiting photovoltaic performance, are discussed: among them, we identified the combination of low absorption coefficient and heavy mass of the holes as main limitations for the solar cell efficiency. To the best of our knowledge, this is the first demonstration of the potential of 2D copper perovskite as light harvesters and lays the foundation for further development of perovskite based on transition metals as alternative lead-free materials. Appropriate molecular design will be necessary to improve the material's properties and solar cell performance filling the gap with the state-of-the-art Pb-based perovskite devices.
RESUMEN
Precise morphological control in perovskite films is key to high performance photovoltaic and light emitting devices. However, a clear understanding of the interplay of morphological effects from substrate/perovskite antisolvent treatments on the charge dynamics is still severely lacking. Through detailed ultrafast optical spectroscopy, we correlate the morphology-kinetics relationship in a combination of substrate/film treated samples (i.e., plasma-cleaned vs. piranha-etched substrates and solvent (toluene)-engineered (or toluene anti-solvent treated) perovskite films). Our findings reveal that toluene-dripped treatment has a more pronounced influence on the morphology of perovskite films prepared on plasma-cleaned substrates over those on piranha-etched substrates. Surprisingly, the highly effective toluene-dripping/washing approach reported in the literature increases the surface trap densities of perovskite films. Despite the marked improvements in the surface morphology of the toluene-dripped films, there is only a slight improvement in the carrier relaxation lifetimes - likely due to the competition between the morphology improvements and the increased surface trap densities. In addition, the injection of photoexcited holes to spiro-OMeTAD from toluene-dripped films on piranha-etched substrates is inhibited, possibly due to a realignment of the energy bands. Nonetheless, piranha-etching of the substrates could possibly offer an approach to improve the balance between the electron and hole diffusion lengths in the perovskite film. Importantly, our findings would help unravel the complex relationship of substrate/film treatments on the morphology and charge kinetics in perovskite thin films.
RESUMEN
Semiconductors are ubiquitous gain media for coherent light sources. Solution-processed three-dimensional (3D) halide perovskites (e.g., CH3NH3PbI3) with their outstanding room temperature optical gain properties are the latest members of this family. Their two-dimensional (2D) layered perovskite counterparts with natural multiple quantum well structures exhibit strong light-matter interactions and intense excitonic luminescence. However, despite such promising traits, there have been no reports on room temperature optical gain in 2D layered perovskites. Herein, we reveal the challenges towards achieving amplified spontaneous emission (ASE) in the archetypal (C6H5C2H4NH3)2PbI4 (or PEPI) system. Temperature-dependent transient spectroscopy uncovers the dominant free exciton trapping and bound biexciton formation pathways that compete effectively with biexcitonic gain. Phenomenological rate equation modeling predicts a large biexciton ASE threshold of â¼1.4 mJ cm(-2), which is beyond the damage threshold of these materials. Importantly, these findings would rationalize the difficulties in achieving optical gain in 2D perovskites and provide new insights and suggestions for overcoming these challenges.
RESUMEN
Low-temperature solution-processed organic-inorganic halide perovskite CH3NH3PbI3 has demonstrated great potential for photovoltaics and light-emitting devices. Recent discoveries of long ambipolar carrier diffusion lengths and the prediction of the Rashba effect in CH3NH3PbI3, that possesses large spin-orbit coupling, also point to a novel semiconductor system with highly promising properties for spin-based applications. Through circular pump-probe measurements, we demonstrate that highly polarized electrons of total angular momentum (J) with an initial degree of polarization Pini â¼90% (i.e., -30% degree of electron spin polarization) can be photogenerated in perovskites. Time-resolved Faraday rotation measurements reveal photoinduced Faraday rotation as large as 10°/µm at 200 K (at wavelength λ = 750 nm) from an ultrathin 70 nm film. These spin polarized carrier populations generated within the polycrystalline perovskite films, relax via intraband carrier spin-flip through the Elliot-Yafet mechanism. Through a simple two-level model, we elucidate the electron spin relaxation lifetime to be â¼7 ps and that of the hole is â¼1 ps. Our work highlights the potential of CH3NH3PbI3 as a new candidate for ultrafast spin switches in spintronics applications.
RESUMEN
Herein, the controlled synthesis of 3D hierarchical films on carbon cloth (CC) in a high yield through a hydrothermal process and their high photocatalytic properties are reported. As representative examples, the obtained ZnIn2 S4 /CdIn2 S4 composites are composed of porous nanosheets. During the hydrothermal process, l-cysteine plays an important dual role as a coordinating agent and sulfur source, which is in favor of adjusting stoichiometry of the final product and forming the nanoporous structure. This facile method can be extended to synthesize other sulfides and oxides on CC substrates, such as CoIn2 S4 , MnIn2 S4 , FeIn2 S4 , SnS2 , and Bi2 WO6 . When evaluated the photocatalytic activity, the optimized ZnIn2 S4 /CdIn2 S4 (20%)-CC with an easily recycling feature shows higher photocatalytic degradation activity for methylene blue (MB) than ZnIn2 S4 -CC, CdIn2 S4 -CC, and ZnIn2 S4 /CdIn2 S4 (20%) powder. More importantly, ZnIn2 S4 /CdIn2 S4 (20%)-CC also exhibits superior H2 production activity. The enhanced photocatalytic activity is attributed to the unique porous sheet-like structure and the formation of heterojunction. Our results could provide a promising way to develop high-performance photocatalytic films, which makes it possible to be used in real devices.
RESUMEN
Low-temperature solution-processed CH3 NH3 PbI3 interfaced with TiO2 has recently been demonstrated as a highly successful type-II light harvesting heterojunction with ≈20% efficiency. Therefore, an efficient ultrafast photoexcited electron transfer from CH3 NH3 PbI3 to TiO2 is expected. However, by probing the photoexcited charge carrier dynamics in CH3 NH3 PbI3 /quartz, CH3 NH3 PbI3 /TiO2 (compact), and CH3 NH3 PbI3 /PCBM in a comparative study, an electron transfer potential barrier between CH3 NH3 PbI3 and the compact TiO2 (prepared with the spray pyrolysis method) formed by surface states is uncovered. Consequently, the CH3 NH3 PbI3 photoluminescence intensity and lifetime is enhanced when interfaced to compact TiO2 . The electron accumulation within CH3 NH3 PbI3 needed to overcome this interfacial potential barrier results in the undesirable large current-voltage hysteresis observed for CH3 NH3 PbI3 /TiO2 planar heterojunctions. The findings in this study indicate that careful surface engineering to reduce this potential barrier is key to pushing perovskite solar cell efficiencies toward the theoretical limit.
RESUMEN
Low-temperature solution-processed materials that show optical gain and can be embedded into a wide range of cavity resonators are attractive for the realization of on-chip coherent light sources. Organic semiconductors and colloidal quantum dots are considered the main candidates for this application. However, stumbling blocks in organic lasing include intrinsic losses from bimolecular annihilation and the conflicting requirements of high charge carrier mobility and large stimulated emission; whereas challenges pertaining to Auger losses and charge transport in quantum dots still remain. Herein, we reveal that solution-processed organic-inorganic halide perovskites (CH3NH3PbX3 where X = Cl, Br, I), which demonstrated huge potential in photovoltaics, also have promising optical gain. Their ultra-stable amplified spontaneous emission at strikingly low thresholds stems from their large absorption coefficients, ultralow bulk defect densities and slow Auger recombination. Straightforward visible spectral tunability (390-790 nm) is demonstrated. Importantly, in view of their balanced ambipolar charge transport characteristics, these materials may show electrically driven lasing.
RESUMEN
A novel hole-transporting molecule (F101) based on a furan core has been synthesized by means of a short, high-yielding route. When used as the hole-transporting material (HTM) in mesoporous methylammonium lead halide perovskite solar cells (PSCs) it produced better device performance than the current state-of-the-art HTM 2,2',7,7'-tetrakis-(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD). The F101-HTM-based device exhibited both slightly higher Jsc (19.63 vs. 18.41â mA cm(-2) ) and Voc (1.1 vs. 1.05â V) resulting in a marginally higher power conversion efficiency (PCE) (13.1 vs. 13 %). The steady-state and time-resolved photoluminescence show that F101 has significant charge extraction ability. The simple molecular structure, short synthesis route with high yield and better performance in devices makes F101 an excellent candidate for replacing the expensive spiro-OMeTAD as HTM in PSCs.
RESUMEN
Mass transport has been identified as a limiting problem in the photovoltaic performance of dye-sensitized solar cells based on electrolytes consisting of ionic liquids or cobalt complexes. A mixed TiO2 macroporous-mesoporous morphology employed as photoanode is demonstrated to assist the diffusion of electrolytes with higher viscosity or consisting of bulky redox mediators, such as cobalt di-tert-butyl bipyridine [Co(dtb)3](2+/3+). This morphology with large pores improves the non-linearity of photocurrent response to light intensity indicating better diffusion. The incorporated sub-micrometer pores also reduce recombination and decrease diffusion resistance, as revealed by electrochemical impedance spectroscopy.
RESUMEN
We report a highly efficient solar cell based on a submicrometer (~0.6 µm) rutile TiO2 nanorod sensitized with CH3NH3PbI3 perovskite nanodots. Rutile nanorods were grown hydrothermally and their lengths were varied through the control of the reaction time. Infiltration of spiro-MeOTAD hole transport material into the perovskite-sensitized nanorod films demonstrated photocurrent density of 15.6 mA/cm(2), voltage of 955 mV, and fill factor of 0.63, leading to a power conversion efficiency (PCE) of 9.4% under the simulated AM 1.5G one sun illumination. Photovoltaic performance was significantly dependent on the length of the nanorods, where both photocurrent and voltage decreased with increasing nanorod lengths. A continuous drop of voltage with increasing nanorod length correlated with charge generation efficiency rather than recombination kinetics with impedance spectroscopic characterization displaying similar recombination regardless of the nanorod length.
RESUMEN
We report a novel electron-rich molecule based on 3,4-ethylenedioxythiophene (H101). When used as the hole-transporting layer in a perovskite-based solar cell, the power-conversion efficiency reached 13.8 % under AM 1.5G solar simulation. This result is comparable with that obtained using the well-known hole transporting material 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD). This is the first heterocycle-containing material achieving >10 % efficiency in such devices, and has great potential to replace the expensive spiro-OMeTAD given its much simpler and cheaper synthesis.
RESUMEN
Flexible three-dimensional (3D) nanoarchitectures have received tremendous interest recently because of their potential applications in wearable electronics, roll-up displays, and other devices. The design and fabrication of a flexible and robust electrode based on cobalt sulfide/reduced graphene oxide/carbon nanotube (CoS2 /RGO-CNT) nanocomposites are reported. An efficient hydrothermal process combined with vacuum filtration was used to synthesize such composite architecture, which was then embedded in a porous CNT network. This conductive and robust film is evaluated as electrocatalyst for the hydrogen evolution reaction. The synergistic effect of CoS2 , graphene, and CNTs leads to unique CoS2 /RGO-CNT nanoarchitectures, the HER activity of which is among the highest for non-noble metal electrocatalysts, showing 10â mA cm(-2) current density at about 142â mV overpotentials and a high electrochemical stability.
RESUMEN
Colloidal perovskite quantum dots (PQDs) have emerged as highly promising single photon emitters for quantum information applications. Presently, most strategies have focused on leveraging quantum confinement to increase the nonradiative Auger recombination (AR) rate to enhance single-photon (SP) purity in all-inorganic CsPbBr3 QDs. However, this also increases the fluorescence intermittency. Achieving high SP purity and blinking mitigation simultaneously remains a significant challenge. Here, we transcend this limitation with room-temperature synthesized weakly confined hybrid organic-inorganic perovskite (HOIP) QDs. Superior single photon purity with a low g(2)(0) < 0.07 ± 0.03 and a nearly blinking-free behavior (ON-state fraction >95%) in 11 nm FAPbBr3 QDs are achieved at room temperature, attributed to their long exciton lifetimes (τX) and short biexciton lifetimes (τXX). The significance of the organic A-cation is further validated using the mixed-cation FAxCs1-xPbBr3. Theoretical calculations utilizing a combination of the Bethe-Salpeter (BSE) and k·p approaches point toward the modulation of the dielectric constants by the organic cations. Importantly, our findings provide valuable insights into an additional lever for engineering facile-synthesized room-temperature PQD single photon sources.
RESUMEN
The ability to perceive color by the retina can be attributed to both its trichromatic photoreceptors and the antagonistic neural wiring known as the opponent process. While neuromorphic sensors have been shown to demonstrate memory and adaptation capabilities, color perception is still challenging due to the intrinsic lack of spectral selectivity in narrow bandgap semiconductors. Furthermore, research on emulating neural wiring is severely lacking. The combination of halide perovskite materials with a tunable bandgap and a novel bipolar photodetector design emulates the efficiency of the retina in processing color information. The stimuli-responsive material is also responsible for maintaining partial color constancy-an adaptation feature. Leveraging the unique enhancement of color contrasts, an in-sensor data compression and edge detection can also be demonstrated. The color perception, chromatic adaptation, and color contrast enhancement make perovskite bipolar photodetectors a unique example where the sensor and neural wiring can be co-developed in conjunction.
RESUMEN
Quantum cutting (QC) allows the conversion of high-energy photons into lower-energy photons, exhibiting great potential for infrared communications. Yb-doped perovskite nanocrystals can achieve an efficient QC process with extremely high photoluminescence quantum yield (PLQY) thanks to the favorable Yb3+ incorporation in the perovskite structure. However, conventionally used oleic acid-oleylamine-based ligand pairs cause instability issues due to highly dynamic binding to surface states that have curbed their potential applications. Herein, zwitterionic type C3-sulfobetaine 3-(N,N-Dimethylpalmitylammonio)propanesulfonate molecule is utilized to build a strong binding state on the nanocrystals' surface through a new phosphine oxide synthesis route. Leveraging machine learning and Bayesian Optimization workflow to determine optimal synthesis conditions, near-infrared PLQY above 190% is achieved. The high PLQY is well maintained after over three months of aging, under high-flux continuous UV irradiation, and long continuous annealing. This is the first report of highly efficient and stable perovskite quantum cutters, which will drive the study of fundamental physics phenomena and near-infrared quantum communications.