Bio-Inspired Interlocking Structures for Enhancing Flexible Coatings Adhesion.

The flexible protective coatings and substrates frequently exhibit unstable bonding in industrial applications. For strong interfacial adhesion of heterogeneous materials and long-lasting adhesion of flexible protective coatings even in harsh corrosive environments. Inspired by the interdigitated structures in Phloeodes diabolicus elytra, a straightforward magnetic molding technique is employed to create an interlocking microarray for reinforced heterogeneous assembly. Benefiting from this bio-inspired microarrays, the interlocking polydimethylsiloxane (PDMS) coating recorded a 270% improvement in tensile adhesion and a 520% increase in shear resistance, approaching the tensile limitation of PDMS. The elastic polyurethane-polyamide (PUPI) coating equipped with interlocking structures demonstrated a robust adhesion strength exceeding 10.8 MPa and is nearly unaffected by the corrosion immersion. In sharp contrast, its unmodified counterpart exhibited low initial adhesion and maintain ≈20% of its adhesion strength after 30 d of immersion. PUPI coating integrated with microarrays exhibits superior resistance to corrosion (30 d, |Z|0.01HZ ≈1010 Ω cm2, Rct≈108 Ω cm2), cavitation and long-term adhesion retention. These interlocking designs can also be adapted to curved surfaces by 3D printing and enhances heterogeneous assembly of non-bonded materials like polyvinylidene fluoride (PTFE) and PDMS. This bio-inspired interlocking structures offers a solution for durably bonding incompatible interfaces across varied engineering applications.

1,2,3-Triazoles: Controlled Switches in Logic Gate Applications.

A 1,2,3-triazole-based chemosensor is used for selective switching in logic gate operations through colorimetric and fluorometric response mechanisms. The molecular probe synthesized via "click chemistry" resulted in a non-fluorescent 1,4-diaryl-1,2,3-triazole with a phenol moiety (PTP). However, upon sensing fluoride, it TURNS ON the molecule's fluorescence. The TURN-OFF order occurs through fluorescence quenching of the sensor when metal ions, e.g., Cu2+, and Zn2+, are added to the PTP-fluoride ensemble. A detailed characterization using Nuclear Magnetic Resonance (NMR) spectroscopy in a sequential titration study substantiated the photophysical characteristics of PTP through UV-Vis absorption and fluorescence profiles. A combination of fluorescence OFF-ON-OFF sequences provides evidence of 1,2,3-triazoles being controlled switches applicable to multimodal logic operations. The "INH" gate was constructed based on the fluorescence output of PTP when the inputs are F- and Zn2+. The "IMP" and "OR" gates were created on the colorimetric output responses using the probe's absorption with multiple inputs (F- and Zn2+ or Cu2+). The PTP sensor is the best example of the "Write-Read-Erase-Read" mimic.

An Intelligent Correlation Real-Time Analysis Method for the Mechanical Properties of Members in Super-Span Valve Hall Grid Structure Hoisting Process.

The mechanical performance analysis of the members is the primary basis for evaluating the hoisting quality and safety of the valve hall grid structure. Ordinarily, manual analysis of monitoring data and on-site experience inspection are employed to structural judgment, but it is challenging to evaluate the correlation of the various members and the overall safety of a valve hall. In this paper, an intelligent correlation real-time analysis method based on a BPNN (Back Propagation Neural Network) for the mechanical properties of members is proposed to intelligently control the safety of valve hall grid structure hoisting. The correlation between the mechanical properties of multi-points in the grid structure is used to model the target measuring points. In addition, an intelligent real-time analysis system is used to manage and apply the mechanical property correlation and abnormality of members in real-time. Then, the model is applied to a super-span valve hall in South China, and the application effect is good. The mechanical property correlation model can accurately reflect the mechanical state of the valve hall grid structure hoisting process. Simultaneously, it can effectively pinpoint hidden dangers and locate risk members. It provides a new reference for the normal operation and maintenance of a super-span valve hall grid.

Surprisingly fast self-healing coatings with anti-fog and antimicrobial activities via host-guest interaction.

Dual functional coatings with anti-fog and antimicrobial performances greatly enhance the safety and reliability of medical detection devices, but are prone to mechanical damage, resulting in reduced performance and a shorter service lifespan. Herein, a semi-interpenetrating polymer network (SIPN) coating, featuring hydrophobic-hydrophilic balanced copolymers as bulk chains and host-guest inclusion compounds (HGICs) as cross-linkers, is reported, which demonstrates particularly effective anti-fog and antibacterial performances, along with a surprisingly fast self-healing capability under various scenarios. This HGIC-based coating displayed remarkable anti-fog capability over a wide temperature range from -20 ℃ to 85 ℃ and exhibited reliable antibacterial activities (≥98 %) against both gram-positive and gram-negative bacteria. Also, this coating showed extremely high self-healing ability (≥92 % recovery rate) within just 20 s, significantly outperforming traditional self-healing systems. These findings support the development of functional coatings that can highly maintain rapid self-healing performance while also providing anti-fog and antibacterial properties in medical detection devices.

One step preparation of multifunctional poly (ether sulfone) thin films with potential for wound dressing.

The increasing demand for higher-quality medical care has resulted in the obsolescence of traditional biomaterials. Medical care is currently transitioning from an era depending on single-functional biomaterials to one that is supported by multifunctional and stable biomaterials. Herein, long-lasting multifunctional poly(ether sulfone) thin films (MPFs) containing heparin-mimic groups and a quaternary ammonium compound (QAC) were prepared via semi-interpenetrating polymer network (SIPN) strategy. The MPFs, with rough surface and inner finger-like macrovoid, had better hydrophilicity and anti-protein fouling ability, as revealed by scanning electron microscopy (SEM), atomic force microscope (AFM) and water contact angle (WCA) and protein adsorption tests. The results of platelet adhesion and activation, and clotting time confirmed that the hemocompatibility of the MPFs was significantly improved. From cell culture and germ-culture test, it was noted that the overall trend of human umbilical vein endothelial cell (HUVEC) proliferation was enhanced by a combination of heparin-mimic groups and QAC, whereas the growth of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was significantly prohibited. In addition, the MPFs were capable of modulating the expression level of basic fibroblast growth factor (bFGF) and transforming growth factor-beta1 (TGF-ß1) in fibroblast, which was beneficial to controlling the formation of hypertrophic scar. In summary, the MPFs had potential to be used in the field of wound management and the study might help guide the design of surface structure of wound dressing.

Modeling consolidation of soft clay by developing a fractional differential constitutive model in conjunction with an intelligent displacement inversion method.

Studying the constitutive relation of soft clays is of critical importance for fundamentally understanding their complex consolidation behavior. This study proposes a fractional differential constitutive model in conjunction with an intelligent displacement inversion method based on the classic particle swarm optimization for modeling the deformation behavior of soft clay. The model considered the rheological properties of soft clay at different consolidation stages. In addition, statistical adaptive dynamic particle swarm optimization-least squares support vector machines were implemented to identify the model parameters efficiently. The accuracy and effectiveness of the model were validated using available experimental results. Finally, the application results showed that the proposed model could efficiently simulate coupling properties of soft clay's primary and secondary consolidations.

Bioinspired nanopillar surface for switchable mechano-bactericidal and releasing actions.

Constructing safe and effective antibacterial surfaces has continuously received great attention, especially in healthcare-related fields. Bioinspired mechano-bactericidal nanostructure surfaces could serve as a promising strategy to reduce surface bacterial contamination while avoiding the development of antibiotic resistance. Although effective, these nanostructure surfaces are prone to be contaminated by the accumulation of dead bacteria, inevitably compromising their long-term antibacterial activity. Herein, a bioinspired nanopillar surface with both mechano-bactericidal and releasing actions is developed, via grafting zwitterionic polymer (poly(sulfobetaine methacrylate) (PSBMA)) on ZnO nanopillars. Under dry conditions, this nanopillar surface displays remarkable mechano-bactericidal activity, because the collapsed zwitterionic polymer layer makes no essential influence on nanopillar structure. Once being incubated with aqueous solution, the surface could readily detach the killed bacteria and debris, owing to the swelling of the zwitterionic layer. Consequentially, the surface antibacterial performances can be rapidly and controllably switched between mechano-bactericidal action and bacteria-releasing activity, guaranteeing a long-lasting antibacterial performance. Notably, these collaborative antibacterial behaviors are solely based on physical actions, avoiding the risk of triggering bacteria resistance. The resultant nanopillar surface also enjoys the advantages of substrate-independency and good biocompatibility, offering potential antibacterial applications for biomedical devices and hospital surfaces.

Numerical prediction of the optimal shield tunneling strategy for tunnel construction in karst regions.

Shield tunneling in karst areas poses significant challenges, as vibration caused by the shield machine can disturb the stability of the karst caves, ultimately resulting in the collapse of a tunnel. In the present study, a numerical model involving an iteration process was developed based on the Mindlin solution scheme to identify the optimal shield tunneling speed for minimizing the disturbance to karst cave stability. The developed model was then implemented to investigate an underground tunnel constructed in a karst region with different shield tunneling strategies. By using the variation in the energy density of a karst cave as a performance index, the model predicts that when approaching the affected zone of a karst carve (e.g., approximately 5 m from the carve), the shield tunneling machine should be controlled within a certain speed (i.e., < 30 mm/min). Once the shield tunneling machine moves into the affected zone of the cave, the speed of the machine needs to be decelerated to 11 mm/min, and the speed of 30 mm/min can be restored when the shield machine moves out of the affected zone. This finding demonstrates that the developed model could potentially be used to identify the optimal shield tunneling speed to minimize the disturbance to karst cave stability and ensure the safety of tunnel construction in karst regions.

A three-dimensional intelligent engineering management and control system for the construction of a long-span valve hall project based on a microservice architecture.

Three-dimensional intelligent engineering management and control systems (EMCS) based on the browser/server (B/S) model are an important part of intelligent engineering development. These systems are used for solving the difficulties encountered in engineering management with frequent cross-specialties and are vital tools for data exchange and service sharing among multiple departments. Currently, most engineering management and control systems are based on service-oriented architectures (SOAs). The integration mechanism and high coupling of SOAs leads to the reduction in system expansibility, service quality and service safety of the engineering system, making it difficult for these architectures to serve the construction of long-span valve hall engineering. To address these concerns, the management and application technology of the multidisciplinary data of valve hall engineering based on a microservice architecture (MSA) is proposed to improve the management efficiency of engineering data. A 3D integration modeling method for valve hall engineering structures and geological environments is proposed to establish the topological association between engineering structures and geological environments, without increasing the amount of model data required. A 3D intelligent engineering management and control technology for the entire process of the construction of long-span valve hall engineering is proposed, which realizes the entire process simulation and control of engineering construction based on WebGL technology. Accordingly, a three-dimensional intelligent engineering management and control system for the entire construction process of a long-span valve hall project in Southeast China is established, which can effectively manage and apply the data, display and analyze the three-dimensional model, and control and make decisions regarding the construction schedule. This study provides support for the construction of "smart engineering", promotes information communication and transmission between different project units, and speeds up the transformation from traditional construction management relying on drawings to three-dimensional intelligent construction management based on cloud services.

Thermoresponsive Nanostructures: From Mechano-Bactericidal Action to Bacteria Release.

Overuse of antibiotics can increase the risk of notorious antibiotic resistance in bacteria, which has become a growing public health concern worldwide. Featured with the merit of mechanical rupture of bacterial cells, the bioinspired nanopillars are promising alternatives to antibiotics for combating bacterial infections while avoiding antibacterial resistance. However, the resident dead bacterial cells on nanopillars may greatly impair their bactericidal capability and ultimately impede their translational potential toward long-term applications. Here, we show that the functions of bactericidal nanopillars can be significantly broadened by developing a hybrid thermoresponsive polymer@nanopillar-structured surface, which retains all of the attributes of pristine nanopillars and adds one more: releasing dead bacteria. We fabricate this surface through coaxially decorating mechano-bactericidal ZnO nanopillars with thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) brushes. Combining the benefits of ZnO nanopillars and PNIPAAm chains, the antibacterial performances can be controllably regulated between ultrarobust mechano-bactericidal action (∼99%) and remarkable bacteria-releasing efficiency (∼98%). Notably, both the mechanical sterilization against the live bacteria and the controllable release for the pinned dead bacteria solely stem from physical actions, stimulating the exploration of intelligent structure-based bactericidal surfaces with persistent antibacterial properties without the risk of triggering drug resistance.

Ascidian-Inspired Heparin-Mimetic Magnetic Nanoparticles with Potential for Application in Hemodialysis as Recycling Anticoagulants.

In the present study, heparin-mimetic magnetic nanoparticles (HMNPs), which might be used as recycling anticoagulants, were synthesized by coating heparin-mimetic sodium alginate (HLSA) on the surface of iron oxide magnetic nanoparticles (MNPs), using 3,4,5-trihydroxyphenylalanine (TOPA) as a biological adhesive. HLSA was successfully immobilized on the MNP surface, as revealed by Fourier transform infrared spectroscopy and thermal gravimetric analysis, and the core (MNP)-shell (TOPA, HLSA) structure was confirmed by transmission electron microscopy observations. In addition, in vitro studies of protein adsorption, blood clotting time, and contact activation confirmed that the blood compatibility of the HMNP was significantly enhanced compared with the bare MNP. The improved hemocompatibility was attributed to the introduction of the multiple heparin-mimetic groups (-SO3Na, -COONa, and -OH). In addition, the HMNP showed outstanding recycle stability and, thus, can be reused if needed. The synthesized HMNP appeared to be a suitable biomaterial to safely replace heparin as an anticoagulant in patients undergoing long-term hemodialysis.

Preparation of Ascidian-Inspired Hydrogel Thin Films to Selectively Induce Vascular Endothelial Cell and Smooth Muscle Cell Growth.

Hydrogel thin films (HTFs), which have multiple functions including hemocompatibility and ability of enhancing growth of endothelia cells (ECs) while suppressing proliferation of smooth muscle cells (SMCs), have garnered intense scientific interest due to their potential applications in the field of blood-contact materials. In the present study, we developed stable, multifunctional HTFs containing multiple functional groups (-SO3Na, -COONa, -OH, and -NH2) by layer-by-layer (LbL) self-assembly of a modified sulfonated sodium alginate (SSA) and chitosan (CS), followed by ascidian-inspired post-cross-linking. The prepared HTFs with a 3D porous structure, as revealed by scanning electron microscopy (SEM), maintained outstanding long-term stability. The results of protein adsorption, platelet adhesion and activation, and clotting time confirmed that the hemocompatibility of the HTFs was significantly enhanced compared with the matrix. From the cytocompatibility test, the multiple functional groups at the HTF surface led to remarkable enhancement in human umbilical vein endothelial cell (HUVEC) growth and significant inhibition effects on human umbilical artery smooth muscle cell (HUASMC) proliferation. The ratio of HUVEC to HUASMC increased from 0.25 on the Ti surface to 2.87 on the surface of the HTF with the highest degree of sulfonation (DS). The improved blood compatibility was ascribed to the introduction of the multiple functional groups, and the strongly selective effects on vascular cells were attributed to the synergistic effect of the high degree of sulfonation and the existence of phenolic hydroxyl groups. The unique HTFs prepared in this study, demonstrating excellent hemocompatibility and high selectivity toward vascular cells, may help guide the design of cardiovascular biomaterials for endothelialization.

Synergistic Superhydrophobic and Photodynamic Cotton Textiles with Remarkable Antibacterial Activities.

Pathogenic bacterial contamination is at the root of many persistent and chronic bacterial infections. Synergistic superhydrophobic surfaces functionalized with a cationic antimicrobial agent (e.g., quaternary ammonium components) show promising antimicrobial efficacies, but are inherently contradictory in simultaneously maintaining excellent surface liquid repellency and bactericidal activity due to the compromised low surface energy stemming from the introduced hydrophilic biocides. Herein, we present a synergistic antibacterial cotton textile with superhydrophobic bacterial repellency and photodynamic bactericidal activity for both Staphylococcus aureus and Escherichia coli. The modified cotton textile was constructed by integrating tunable micro/nanoscale roughness, hydrophobic photosensitizer chlorin e6, and surface perfluorination. The triple-scale structured superhydrophobic surfaces exhibited ≲90% reductions in both waterborne and airborne bacterial adhesions. Subsequently, after being exposed to visible light for 45 min, the synergistic surface demonstrated complete inactivation (100% killing) against residual bacterial cells via photodynamic bactericidal capacities. Moreover, the triple-scale structured superhydrophobic surface displayed totally suppressed whole blood adhesion, suggesting potential in preventing plenty of undesirable biomedical forms of contamination. This synergistically antibacterial surface not only improves the antibacterial efficiency but also leads to long-lasting antimicrobial performance, each of which is highly desirable in combating bacterial infections.

Synergistic Photodynamic and Photothermal Antibacterial Nanocomposite Membrane Triggered by Single NIR Light Source.

Herein, we developed a nanocomposite membrane with synergistic photodynamic therapy and photothermal therapy antibacterial effects, triggered by a single near-infrared (NIR) light illumination. First, upconversion nanoparticles (UCNPs) with a hierarchical structure (UCNPs@TiO2) were synthesized, which use NaYF4:Yb,Tm nanorods as the core and TiO2 nanoparticles as the outer shell. Then, nanosized graphene oxide (GO), as a photothermal agent, was doped into UCNPs@TiO2 core-shell nanoparticles to obtain UCNPs@TiO2@GO. Afterward, the mixture of UCNPs@TiO2@GO in poly(vinylidene) fluoride (PVDF) was applied for electrospinning to generate the nanocomposite membrane (UTG-PVDF). Generation of reactive oxygen species (ROS) and changes of temperature triggered by NIR action were both investigated to evaluate the photodynamic and photothermal properties. Upon a single NIR light (980 nm) irradiation for 5 min, the nanocomposite membrane could simultaneously generate ROS and moderate temperature rise, triggering synergistic antibacterial effects against both Gram-positive and -negative bacteria, which are hard to be achieved by an individual photodynamic or photothermal nanocomposite membrane. Additionally, the as-prepared membrane can effectively restrain the inflammatory reaction and accelerate wound healing, thus exhibiting great potentials in treating infectious complications in wound healing progress.

Near-infrared triggered antibacterial nanocomposite membrane containing upconversion nanoparticles.

Many conventional bactericidal materials exhibit antibacterial activities by releasing biocides, which potentially trigger antibiotic resistance and cause environmental concerns. In the present work, we reported the development of antibacterial nanocomposite membrane containing upconversion nanoparticles (UCNPs) by electrospinning. The nanocomposite membrane itself was not bactericidal but exhibits strongly antimicrobial performance on demand as activated by near-infrared (NIR) light. Upon just 5 min of NIR irradiation, the UCNPs in the nanocomposite membrane could trigger the release of reactive oxygen species (ROS) from photosensitizers, which could kill both Gram-positive Staphylococcus aureus (94.5%) and Gram-negative Escherichia coli (93.2%) rapidly. Moreover, the bactericidal activity could be effectively maintained for at least four cycles. In addition, the nanocomposite membrane showed no adverse effects on the mammalian cells, as verified by a cytotoxicity assay. This work provided a new strategy in designing novel antibacterial materials that might be potentially applied in infection-resistant and wound healing.

Artificial Nacre from Supramolecular Assembly of Graphene Oxide.

Inspired by the "brick-and-mortar" structure and remarkable mechanical performance of nacre, many efforts have been devoted to fabricating nacre-mimicking materials. Herein, a class of graphene oxide (GO) based artificial nacre material with quadruple hydrogen-bonding interactions was fabricated by functionalization of polydopamine-capped graphene oxide (PDG) with 2-ureido-4[1 H]-pyrimidinone (UPy) self-complementary quadruple hydrogen-bonding units followed by supramolecular assembly process. The artificial nacre displays a strict "brick-and-mortar" structure, with PDG nanosheets as the brick and UPy units as the mortar. The resultant nanocomposite shows an excellent balance of strength and toughness. Because of the strong strengthening via quadruple hydrogen bonding, the tensile strength and toughness can reach 325.6 ± 17.8 MPa and 11.1 ± 1.3 MJ m-3, respectively, thus exceeding natural nacre, and reaching 3.6 and 10 times that of a pure GO artificial nacre. Furthermore, after further H2O treatment, the resulting H2O-treated PDG-UPy actuator displays significant bending actuations when driven by heat. This work provides a pathway for the development of artificial nacre for their potential applications in energy conversion, temperature sensor, and thermo-driven actuator.

Enhancing the functionality of biobased polyester coating resins through modification with citric acid.

Citric acid (CA) was evaluated as a functionality-enhancing monomer in biobased polyesters suitable for coating applications. Model reactions of CA with several primary and secondary alcohols and diols, including the 1,4:3,6-dianhydrohexitols, revealed that titanium(IV) n-butoxide catalyzed esterification reactions involving these compounds proceed at relatively low temperatures, often via anhydride intermediates. Interestingly, the facile anhydride formation from CA at temperatures around CA's melting temperature ( T m = 153 degrees C) proved to be crucial in modifying sterically hindered secondary hydroxyl end groups. OH-functional polyesters were reacted with CA in the melt between 150 and 165 degrees C, yielding slightly branched carboxylic acid functional materials with strongly enhanced functionality. The acid/epoxy curing reaction of the acid-functional polymers was simulated with a monofunctional glycidyl ether. Finally, the CA-modified polyesters were applied as coatings, using conventional cross-linking agents. The formulations showed rapid curing, resulting in chemically and mechanically stable coatings. These results demonstrate that citric acid can be applied in a new way, making use of its anhydride formation to functionalize OH-functional polyesters, which is an important new step toward fully biobased coating systems.

Dual-Functional Antifogging/Antimicrobial Polymer Coating.

Dual-functional antifogging/antimicrobial polymer coatings were prepared by forming a semi-interpenetrating polymer network (SIPN) of partially quaternized poly(2-(dimethylamino)ethyl methacrylate-co-methyl methacrylate) and polymerized ethylene glycol dimethacrylate network. The excellent antifogging behavior of the smooth coating was mainly attributed to the hydrophilic/hydrophobic balance of the partially quaternized copolymer, while the covalently bonded, hydrophobic quaternary ammonium compound (5 mol % in the copolymer) rendered the coating strongly antimicrobial, as demonstrated by the total kill against both Gram-positive Staphylococcus epidermidis and Gram-negative Escherichia coli. The antimicrobial action of the SIPN coating was based on contact killing, without leaching of bactericidal species, as revealed by a zone-of-inhibition test. This type of dual-functional coating may find unique applications where both antimicrobial and antifogging properties are desired.

Self-Stratified Antimicrobial Acrylic Coatings via One-Step UV Curing.

We designed and synthesized a novel quaternary ammonium methacrylate compound (QAC-2) bearing a perfluoroalkyl tail on one end and an acrylic moiety on the other. Via one-step UV curing of QAC-2 and methyl methacrylate (MMA) with ethylene glycol dimethacrylate (EGDMA) as the cross-linker, we obtained cross-linked coatings with excellent antimicrobial property, as demonstrated by the total kill against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus epidermidis (S. epidermidis) at a QAC-2 concentration as low as ∼0.06 mol % (∼0.4 wt %) relative to MMA, which was substantially lower than the QAC amount needed in the coatings containing QACs with a hydrocarbon tail. A zone of inhibition test confirmed that the antimicrobial effect was on the basis of contact killing and there was no leaching of antimicrobial species from the cross-linked coating. The high antimicrobial potency in QAC-2-containing films was the consequence of strong surface enrichment of the fluorinated QAC, as confirmed by X-ray photoelectron spectroscopy (XPS).

High-efficiency immunoassay platforms with controllable surface roughness and oriented antibody immobilization.

High-efficiency immunoassay platforms with controlled surface roughness (single- and dual-scale structured surface) were prepared by combining a facile layer-by-layer particle deposition approach with oriented immobilization of antibodies through boronic acid moieties. The as-prepared surfaces showed significantly enhanced antibody loading capacity and antigen recognition, as proved by fluorescence images.