Non-Coagulant Spinning of High-Strength Fibers from Homopolymer Polyacrylonitrile Synthesized via Anionic Polymerisation.

The rheological properties, spinnability, and thermal-oxidative stabilization of high-molecular-weight linear polyacrylonitrile (PAN) homopolymers (molecular weights Mη = 90-500 kg/mol), synthesized via a novel metal-free anionic polymerization method, were investigated to reduce coagulant use, enable solvent recycling, and increase the carbon yield of the resulting carbon fibers. This approach enabled the application of the mechanotropic (non-coagulating) spinning method for homopolymer PAN solutions in a wide range of molecular weights and demonstrated the possibility of achieving a high degree of fiber orientation and reasonable mechanical properties. Rheological analysis revealed a significant increase in solution elasticity (G') with increasing molecular weight, facilitating the choice of optimal deformation rates for effective chain stretching prior to strain-induced phase separation during the eco-friendly spinning of concentrated solutions without using coagulation baths. The possibility of collecting ~80 wt% of the solvent at the first stage of spinning from the as-spun fibers was shown. Transparent, defect-free fibers with a tensile strength of up to 800 MPa and elongation at break of about 20% were spun. Thermal treatment up to 1500 °C yielded carbon fibers with a carbon residue of ~50 wt%, in contrast to ~35 wt% for industrial radically polymerized PAN carbonized under the same conditions.

Morphology and transport properties of membranes obtained by coagulation of cellulose solutions in isobutanol.

The evolution of structural-morphological transformations of cellulose membranes obtained from solutions in N-methylmorpholine-N-oxide through various temperature isobutanol coagulation baths and subsequent treatment with water and their transport properties were studied. Using SEM, it was found that during coagulation in water and drying of the membranes, a uniform monolithic microheterogeneous texture was formed. The replacement of an aqueous precipitation bath with an isobutanol one leads to the formation of a porous structure with wide pore size and shape distributions. With an increase in precipitant temperature in the as-formed membrane, transverse tunnel cavities are formed with respect to the membrane-forming axis, which collapses when the membrane is washed with water, forming a dense texture with a non-uniform membrane volume. The mechanical properties of the obtained membranes were determined and a mechanism is proposed that allows their values to be correlated with structural-morphological and transport properties.