RESUMEN
Synthetic carbon allotropes such as graphene1, carbon nanotubes2 and fullerenes3 have revolutionized materials science and led to new technologies. Many hypothetical carbon allotropes have been discussed4, but few have been studied experimentally. Recently, unconventional synthetic strategies such as dynamic covalent chemistry5 and on-surface synthesis6 have been used to create new forms of carbon, including γ-graphyne7, fullerene polymers8, biphenylene networks9 and cyclocarbons10,11. Cyclo[N]carbons are molecular rings consisting of N carbon atoms12,13; the three that have been reported to date (N = 10, 14 and 18)10,11 are doubly aromatic, which prompts the question: is it possible to prepare doubly anti-aromatic versions? Here we report the synthesis and characterization of an anti-aromatic carbon allotrope, cyclo[16]carbon, by using tip-induced on-surface chemistry6. In addition to structural information from atomic force microscopy, we probed its electronic structure by recording orbital density maps14 with scanning tunnelling microscopy. The observation of bond-length alternation in cyclo[16]carbon confirms its double anti-aromaticity, in concordance with theory. The simple structure of C16 renders it an interesting model system for studying the limits of aromaticity, and its high reactivity makes it a promising precursor to novel carbon allotropes15.
RESUMEN
Fractionalization is a phenomenon in which strong interactions in a quantum system drive the emergence of excitations with quantum numbers that are absent in the building blocks. Outstanding examples are excitations with charge e/3 in the fractional quantum Hall effect1,2, solitons in one-dimensional conducting polymers3,4 and Majorana states in topological superconductors5. Fractionalization is also predicted to manifest itself in low-dimensional quantum magnets, such as one-dimensional antiferromagnetic S = 1 chains. The fundamental features of this system are gapped excitations in the bulk6 and, remarkably, S = 1/2 edge states at the chain termini7-9, leading to a four-fold degenerate ground state that reflects the underlying symmetry-protected topological order10,11. Here, we use on-surface synthesis12 to fabricate one-dimensional spin chains that contain the S = 1 polycyclic aromatic hydrocarbon triangulene as the building block. Using scanning tunnelling microscopy and spectroscopy at 4.5 K, we probe length-dependent magnetic excitations at the atomic scale in both open-ended and cyclic spin chains, and directly observe gapped spin excitations and fractional edge states therein. Exact diagonalization calculations provide conclusive evidence that the spin chains are described by the S = 1 bilinear-biquadratic Hamiltonian in the Haldane symmetry-protected topological phase. Our results open a bottom-up approach to study strongly correlated phases in purely organic materials, with the potential for the realization of measurement-based quantum computation13.
RESUMEN
The design of open-shell carbon-based nanomaterials is at the vanguard of materials science, steered by their beneficial magnetic properties like weaker spin-orbit coupling than that of transition metal atoms and larger spin delocalization, which are of potential relevance for future spintronics and quantum technologies. A key parameter in magnetic materials is the magnetic exchange coupling (MEC) between unpaired spins, which should be large enough to allow device operation at practical temperatures. In this work, we theoretically and experimentally explore three distinct families of nanographenes (NGs) (A, B, and C) featuring majority zigzag peripheries. Through many-body calculations, we identify a transition from a closed-shell ground state to an open-shell ground state upon an increase of the molecular size. Our predictions indicate that the largest MEC for open-shell NGs occurs in proximity to the transition between closed-shell and open-shell states. Such predictions are corroborated by the on-surface syntheses and structural, electronic, and magnetic characterizations of three NGs (A[3,5], B[4,5], and C[4,3]), which are the smallest open-shell systems in their respective chemical families and are thus located the closest to the transition boundary. Notably, two of the NGs (B[4,5] and C[4,3]) feature record values of MEC (close to 200 meV) measured on the Au(111) surface. Our strategy for maximizing the MEC provides perspectives for designing carbon nanomaterials with robust magnetic ground states.
RESUMEN
The electronic, optical, and magnetic properties of graphene nanoribbons (GNRs) can be engineered by controlling their edge structure and width with atomic precision through bottom-up fabrication based on molecular precursors. This approach offers a unique platform for all-carbon electronic devices but requires careful optimization of the growth conditions to match structural requirements for successful device integration, with GNR length being the most critical parameter. In this work, the growth, characterization, and device integration of 5-atom wide armchair GNRs (5-AGNRs) are studied, which are expected to have an optimal bandgap as active material in switching devices. 5-AGNRs are obtained via on-surface synthesis under ultrahigh vacuum conditions from Br- and I-substituted precursors. It is shown that the use of I-substituted precursors and the optimization of the initial precursor coverage quintupled the average 5-AGNR length. This significant length increase allowed the integration of 5-AGNRs into devices and the realization of the first field-effect transistor based on narrow bandgap AGNRs that shows switching behavior at room temperature. The study highlights that the optimized growth protocols can successfully bridge between the sub-nanometer scale, where atomic precision is needed to control the electronic properties, and the scale of tens of nanometers relevant for successful device integration of GNRs.
RESUMEN
BACKGROUND: The incidence of non-communicable diseases (NCDs) is increasing in rural India. The National Family Health Survey-5 (NFHS-5) provides estimates of the burden of NCDs and their risk factors in women aged 15-49 and men aged 15-54 years. The aim of this study is to estimate the prevalence of hypertension and body-mass index (BMI) in adults aged 35-70 years in rural India and to compare these estimates, where age ranges overlap, to routinely available data. METHODS: The Non-Communicable Disease in Rural India (NCDRI) Study was a cross-sectional household survey of 1005 women and 1025 men aged 35-70 conducted in Bihar in July 2019. Information was collected on personal characteristics, self-reported medical history and physical measurements (blood pressure, height and weight). Prevalence estimates for hypertension (systolic blood pressure ≥ 140 mmHg or diastolic blood pressure ≥ 90 mmHg, or diagnosed and treated for hypertension), and for underweight (body-mass index < 18.5 kg/m2), normal weight (18.5-25.0 kg/m2) and overweight (≥ 25.0 kg/m2) were calculated. Where age ranges overlapped, estimates from the NCDRI Study were compared to the NFHS-5 Survey. RESULTS: In the NCDRI Study, the estimated prevalence of hypertension was 27.3% (N = 274) in women and 27.6% (N = 283) in men aged 35-70, which was three-times higher in women and over two-times higher in men than in the NFHS-5 Survey. One-quarter (23.5%; N = 236) of women and one-fifth (20.2%; N = 207) of men in the NCDRI Study were overweight, which was approximately 1.5 times higher than in the NFHS-5 Survey. However, where age groups overlapped, similar age-standardized estimates were obtained for hypertension and weight in both the NCDRI Study and the NFHS-5 Survey. CONCLUSION: The prevalence of NCDs in rural India is higher than previously reported due to the older demographic in our survey. Future routine national health surveys must widen the age range of participants to reflect the changing disease profile of rural India, and inform the planning of health services.
Asunto(s)
Hipertensión , Enfermedades no Transmisibles , Adulto , Índice de Masa Corporal , Estudios Transversales , Femenino , Encuestas Epidemiológicas , Humanos , Hipertensión/epidemiología , India/epidemiología , Masculino , Enfermedades no Transmisibles/epidemiología , Obesidad/epidemiología , Sobrepeso/epidemiología , Prevalencia , Factores de Riesgo , Población RuralRESUMEN
This commentary focuses on "intangible software", defined as the range of ideas, norms, values and issues of power or trust that affect the performance of health systems. While the need to work with intangible software within health systems is increasingly being recognized, the practical hows of doing so have been given less attention. In this commentary, we, a team of researchers and implementers from India, have tried to deliberate on these hows through a practice lens. We engage with four questions of current relevance to intangible software in the field of health policy and systems research (HPSR): (1) Is it possible to rewire intangible software in health systems? (2) What approaches have been attempted in the Indian public health system to rewire intangibles? (3) Have such approaches been evaluated? (4) What practical lessons can we offer from our experience on rewiring intangibles? From our perspective, approaches to rewiring intangible software recognize that people in health systems are capable of visioning, thinking, adapting to and leading change. These approaches attempt to challenge the often-unchallenged power hierarchies in health systems by allowing people to engage deeply with widely accepted norms and routinized actions. In this commentary, we have reported on such approaches from India under six categories: approaches intended to enable visioning and leading; approaches targeted at engaging with evidence better; approaches intended to help health workers navigate contextual complexities; approaches intended to build the cultural competence; approaches that recognize and reward performance; and approaches targeted at enabling collaborative work and breaking power hierarchies. Our collective experiences suggest that intangible software interventions work best when they are codesigned with various stakeholders, are contextually adapted in an iterative manner and are implemented in conjunction with structural improvements. Also, such interventions require long-term investments. Based on our experiences, we highlight the need for the following: (1) fostering more dialogue on this category of interventions among all stakeholders for cross-learning; (2) evaluating and publishing evidence on such interventions in nonconventional ways, with a focus on participatory learning; and (3) building ecosystems that allow experiential learnings on such interventions to be shared.
Asunto(s)
Ecosistema , Salud Pública , Programas de Gobierno , Humanos , Investigadores , Programas InformáticosRESUMEN
The on-surface reactions of 10-bromo-10'-(2,6-dimethylphenyl)-9,9'-bianthracene on Au(111) have been investigated by scanning tunneling microscopy and spectroscopy, complemented by theoretical calculations. The reactions afford the synthesis of two open-shell nanographenes (1a and 1b) exhibiting different scenarios of all-carbon magnetism. 1a, an all-benzenoid nanographene with triangulene-like termini, contains a high proportion of zigzag edges which endows it with a low frontier gap and edge-localized states. The dominant reaction product, 1b, is a non-benzenoid nanographene consisting of a single pentagonal ring in a benzenoid framework. The presence of this non-benzenoid topological defect, which alters the bond connectivity in the hexagonal lattice, results in a non-Kekulé nanographene with an unpaired spin, which is detected as a Kondo resonance.
RESUMEN
Nanographenes (NGs) have gained increasing attention due to their immense potential as tailor-made organic materials for nanoelectronics and spintronics. They exhibit a rich spectrum of physicochemical properties that can be tuned by controlling the size or the edge structure or by introducing structural defects in the honeycomb lattice. Here, we report the design and on-surface synthesis of NGs containing several odd-membered polycycles induced by a thermal procedure on Au(111). Our scanning tunneling microscopy, noncontact atomic force microscopy, and scanning tunneling spectroscopy measurements, complemented by computational investigations, describe the formation of two nonbenzenoid NGs (2A,B) containing four embedded azulene units in the polycyclic framework, via on-surface oxidative ring-closure reactions. Interestingly, we observe surface-catalyzed skeletal ring rearrangement reactions in the NGs, which lead to the formation of additional heptagonal rings as well as pentalene and as-indacene units in 2A,B, respectively. 2A,B on Au(111) both exhibit narrow experimental frontier electronic gaps of 0.96 and 0.85 eV, respectively, and Fermi level pinning of their HOMOs together with considerable electron transfer to the substrate. Ab initio calculations estimate moderate open-shell biradical characters for the NGs in the gas phase.
RESUMEN
Triangular zigzag nanographenes, such as triangulene and its π-extended homologues, have received widespread attention as organic nanomagnets for molecular spintronics, and may serve as building blocks for high-spin networks with long-range magnetic order, which are of immense fundamental and technological relevance. As a first step towards these lines, we present the on-surface synthesis and a proof-of-principle experimental study of magnetism in covalently bonded triangulene dimers. On-surface reactions of rationally designed precursor molecules on Au(111) lead to the selective formation of triangulene dimers in which the triangulene units are either directly connected through their minority sublattice atoms, or are separated via a 1,4-phenylene spacer. The chemical structures of the dimers have been characterized by bond-resolved scanning tunneling microscopy. Scanning tunneling spectroscopy and inelastic electron tunneling spectroscopy measurements reveal collective singlet-triplet spin excitations in the dimers, demonstrating efficient intertriangulene magnetic coupling.
RESUMEN
Cumulene compounds are notoriously difficult to prepare and study because their reactivity increases dramatically with the increasing number of consecutive double bonds. In this respect, the emerging field of on-surface synthesis provides exceptional opportunities because it relies on reactions on clean metal substrates under well-controlled ultrahigh-vacuum conditions. Here we report the on-surface synthesis of a polymer linked by cumulene-like bonds on a Au(111) surface via sequential thermally activated dehalogenative C-C coupling of a tribenzoazulene precursor equipped with two dibromomethylene groups. The structure and electronic properties of the resulting polymer with cumulene-like pentagon-pentagon and heptagon-heptagon connections have been investigated by means of scanning probe microscopy and spectroscopy methods and X-ray photoelectron spectroscopy, complemented by density functional theory calculations. Our results provide perspectives for the on-surface synthesis of cumulene-containing compounds, as well as protocols relevant to the stepwise fabrication of carbon-carbon bonds on surfaces.
RESUMEN
Polycyclic hydrocarbons have received great attention due to their potential role in organic electronics and, for open-shell systems with unpaired electron densities, in spintronics and data storage. However, the intrinsic instability of polyradical hydrocarbons severely limits detailed investigations of their electronic structure. Here, we report the on-surface synthesis of conjugated polymers consisting of indeno[2,1-b]fluorene units, which are antiaromatic and open-shell biradicaloids. The observed reaction products, which also include a nonbenzenoid porous ribbon arising from lateral fusion of unprotected indeno[2,1-b]fluorene chains, have been characterized via low-temperature scanning tunneling microscopy/spectroscopy and noncontact atomic force microscopy, complemented by density-functional theory calculations. These polymers present a low band gap when adsorbed on Au(111). Moreover, their pronounced antiaromaticity and radical character, elucidated by ab initio calculations, make them promising candidates for applications in electronics and spintronics. Further, they provide a rich playground to explore magnetism in low-dimensional organic nanomaterials.
RESUMEN
The electronic and magnetic properties of nanographenes strongly depend on their size, shape and topology. While many nanographenes present a closed-shell electronic structure, certain molecular topologies may lead to an open-shell structure. Triangular-shaped nanographenes with zigzag edges, which exist as neutral radicals, are of considerable interest both in fundamental science and for future technologies aimed at harnessing their intrinsic high-spin magnetic ground states for spin-based operations and information storage. Their synthesis, however, is extremely challenging owing to the presence of unpaired electrons, which confers them with enhanced reactivity. We report a combined in-solution and on-surface synthesis of π-extended triangulene, a non-Kekulé nanographene with the structural formula C33H15, consisting of ten benzene rings fused in a triangular fashion. The distinctive topology of the molecule entails the presence of three unpaired electrons that couple to form a spin quartet ground state. The structure of individual molecules adsorbed on an inert gold surface is confirmed through ultrahigh-resolution scanning tunneling microscopy. The electronic properties are studied via scanning tunneling spectroscopy, wherein unambiguous spectroscopic signatures of the spin-split singly occupied molecular orbitals are found. Detailed insight into its properties is obtained through tight-binding, density functional and many-body perturbation theory calculations, with the latter providing evidence that π-extended triangulene retains its open-shell quartet ground state on the surface. Our work provides unprecedented access to open-shell nanographenes with high-spin ground states, potentially useful in carbon-based spintronics.
RESUMEN
Nonbenzenoid carbocyclic rings are postulated to serve as important structural elements toward tuning the chemical and electronic properties of extended polycyclic aromatic hydrocarbons (PAHs, or namely nanographenes), necessitating a rational and atomically precise synthetic approach toward their fabrication. Here, using a combined bottom-up in-solution and on-surface synthetic approach, we report the synthesis of nonbenzenoid open-shell nanographenes containing two pairs of embedded pentagonal and heptagonal rings. Extensive characterization of the resultant nanographene in solution shows a low optical gap, and an open-shell singlet ground state with a low singlet-triplet gap. Employing ultra-high-resolution scanning tunneling microscopy and spectroscopy, we conduct atomic-scale structural and electronic studies on a cyclopenta-fused derivative on a Au(111) surface. The resultant five to seven rings embedded nanographene displays an extremely narrow energy gap of 0.27 eV and exhibits a pronounced open-shell biradical character close to 1 (y0 = 0.92). Our experimental results are supported by mean-field and multiconfigurational quantum chemical calculations. Access to large nanographenes with a combination of nonbenzenoid topologies and open-shell character should have wide implications in harnessing new functionalities toward the realization of future organic electronic and spintronic devices.
RESUMEN
We report the on-surface formation of Au-directed heptacene organometallic complexes on a Au(111) template in an ultrahigh vacuum environment. Successive thermal annealing steps investigated by means of scanning tunneling microscopy, noncontact atomic force microscopy, temperature-programmed desorption and density functional theory reveal the formation of heptacene organometallic complexes via a selective two-step activation of an α-diketone-protected heptacene precursor. Furthermore, we demonstrate the efficiency of tip-induced deprotection experiments as a complementary strategy in the complex formation. Our results provide perspectives for the on-surface synthesis of larger acenes featuring potential use in the fields of organic electronics, spintronics and nonlinear optics.
RESUMEN
We report the generation of a nonbenzenoid polycyclic conjugated hydrocarbon, which consists of a biphenyl moiety substituted by indenyl units at the 4,4' positions, on ultrathin sodium chloride films by tip-induced chemistry. Single-molecule characterization by scanning tunneling and atomic force microscopy reveals an open-shell biradical ground state with a peculiar electronic configuration wherein the singly occupied molecular orbitals (SOMOs) are lower in energy than the highest occupied molecular orbital (HOMO).
RESUMEN
Molecular rings of N carbon atoms (cyclo[N]carbons, or CN) are excellent benchmarking systems for testing quantum chemical theoretical methods and valuable precursors to other carbon-rich materials. Odd-N cyclocarbons, which have been elusive to date, are predicted to be even less stable than even-N cyclocarbons. We report the on-surface synthesis of cyclo[13]carbon, C13, by manipulation of decachlorofluorene with a scanning probe microscope tip. We elucidated the properties of C13 by experiment and theoretical modeling. C13 adopts an open-shell configuration with a triplet ground state and a kinked geometry, which shows different extents of distortion and carbene localization depending on the molecular environment. Moreover, we prepared and characterized the C13 dimer, cyclo[26]carbon, demonstrating the potential of cyclocarbons and their precursors as building blocks for carbon allotropes.
RESUMEN
Indenofluorenes are non-benzenoid conjugated hydrocarbons that have received great interest owing to their unusual electronic structure and potential applications in nonlinear optics and photovoltaics. Here we report the generation of unsubstituted indeno[1,2-a]fluorene on various surfaces by the cleavage of two C-H bonds in 7,12-dihydroindeno[1,2-a]fluorene through voltage pulses applied by the tip of a combined scanning tunnelling microscope and atomic force microscope. On bilayer NaCl on Au(111), indeno[1,2-a]fluorene is in the neutral charge state, but it exhibits charge bistability between neutral and anionic states on the lower-workfunction surfaces of bilayer NaCl on Ag(111) and Cu(111). In the neutral state, indeno[1,2-a]fluorene exhibits one of two ground states: an open-shell π-diradical state, predicted to be a triplet by density functional and multireference many-body perturbation theory calculations, or a closed-shell state with a para-quinodimethane moiety in the as-indacene core. We observe switching between open- and closed-shell states of a single molecule by changing its adsorption site on NaCl.
RESUMEN
Surface-catalyzed reactions have been used to synthesize carbon nanomaterials with atomically predefined structures. The recent discovery of a gold surface-catalyzed [3 + 3] cycloaromatization of isopropyl substituted arenes has enabled the on-surface synthesis of arylene-phenylene copolymers, where the surface activates the isopropyl substituents to form phenylene rings by intermolecular coupling. However, the resulting polymers suffered from undesired cross-linking when more than two molecules reacted at a single site. Here we show that such cross-links can be prevented through steric protection by attaching the isopropyl groups to larger arene cores. Upon thermal activation of isopropyl-substituted 8,9-dioxa-8a-borabenzo[fg]tetracene on Au(111), cycloaromatization is observed to occur exclusively between the two molecules. The cycloaromatization intermediate formed by the covalent linking of two molecules is prevented from reacting with further molecules by the wide benzotetracene core, resulting in highly selective one-to-one coupling. Our findings extend the versatility of the [3 + 3] cycloaromatization of isopropyl substituents and point toward steric protection as a powerful concept for suppressing competing reaction pathways in on-surface synthesis.
RESUMEN
Purpose This study compares the dosimetry and dose sparing of cardiac substructures in single isocenter and dual isocenter RapidArc™ (Varian Medical Systems, Palo Alto, California, United States) radiotherapy planning for synchronous bilateral breast cancer. Methodology Six synchronous bilateral breast cancer (SBBC) patients received adjuvant radiation with the prescribed dose of 40.05 Gy in 15 fractions to the planning target volume (PTV) without local lymph nodal regions. PTVs and organs at risk (OARs), including both lungs, esophagus, spinal cord, heart, and left anterior descending coronary artery (LAD), both atria and ventricles were contoured. Single isocentric RapidArc (SIRA) and dual isocentric RapidArc (DIRA) plans were made for each patient and dosimetric differences between these two techniques were evaluated. Results There was no statistically significant difference in conformity index (CI) values between SIRA and DIRA plans, with 0.9681±0.01 and 0.9721±0.01 (p=0.505), respectively. SIRA planning showed superior homogeneity with homogeneity Index (HI) values of 0.0999±0.01 compared to DIRA planning with HI values of 0.1640±0.12 (p=0.230). The mean LAD dose of SIRA was valued higher than that of DIRA planning. Lower mean doses were obtained for both lungs in SIRA plans compared to DIRA plans. Meanwhile, doses to the right atrium, left atrium, left ventricle, right ventricle, and esophagus showed no statistical significance between these two techniques, except in the spinal cord. Conclusion Both SIRA and DIRA plans have satisfactory outcomes in sparing OARs. Meanwhile, SIRA techniques have less setup time and overall machine time.