Semiconducting Transition Metal Dichalcogenide Heteronanotubes with Controlled Outer-Wall Structures.

Transition metal dichalcogenide (TMDC) nanotubes exhibit unique physical properties due to their nanotube structures. The development of techniques for synthesizing TMDC nanotubes with controlled structures is very important for their science and applications. However, structural control efforts have been made only for the homostructures of TMDC nanotubes and not for their heterostructures that provide an important platform for their two-dimensional counterparts. In this study, we synthesized heterostructures of TMDC nanotubes, MoS2/WS2 heteronanotubes, and demonstrated a technique for controlling features of their structures, such as diameters, layer numbers, and crystallinity. The diameter of the heteronanotubes could be tuned with inner nanotube templates and was reduced by using small-diameter WS2 nanotubes. The layer number and crystallinity of the MoS2 outer wall could be controlled by controlling their precursors and synthesis temperatures, resulting in the formation of high-crystallinity TMDC heteronanotubes with specific chirality. This study can expand the research of van der Waals heterostructures.

Science of 2.5 dimensional materials: paradigm shift of materials science toward future social innovation.

The past decades of materials science discoveries are the basis of our present society - from the foundation of semiconductor devices to the recent development of internet of things (IoT) technologies. These materials science developments have depended mainly on control of rigid chemical bonds, such as covalent and ionic bonds, in organic molecules and polymers, inorganic crystals and thin films. The recent discovery of graphene and other two-dimensional (2D) materials offers a novel approach to synthesizing materials by controlling their weak out-of-plane van der Waals (vdW) interactions. Artificial stacks of different types of 2D materials are a novel concept in materials synthesis, with the stacks not limited by rigid chemical bonds nor by lattice constants. This offers plenty of opportunities to explore new physics, chemistry, and engineering. An often-overlooked characteristic of vdW stacks is the well-defined 2D nanospace between the layers, which provides unique physical phenomena and a rich field for synthesis of novel materials. Applying the science of intercalation compounds to 2D materials provides new insights and expectations about the use of the vdW nanospace. We call this nascent field of science '2.5 dimensional (2.5D) materials,' to acknowledge the important extra degree of freedom beyond 2D materials. 2.5D materials not only offer a new field of scientific research, but also contribute to the development of practical applications, and will lead to future social innovation. In this paper, we introduce the new scientific concept of this science of '2.5D materials' and review recent research developments based on this new scientific concept.

Wafer-Scale Growth of One-Dimensional Transition-Metal Telluride Nanowires.

The development of bulk synthetic processes to prepare functional nanomaterials is crucial to achieve progress in fundamental and applied science. Transition-metal chalcogenide (TMC) nanowires, which are one-dimensional (1D) structures having three-atom diameters and van der Waals surfaces, have been reported to possess a 1D metallic nature with great potential in electronics and energy devices. However, their mass production remains challenging. Here, a wafer-scale synthesis of highly crystalline transition-metal telluride nanowires is demonstrated by chemical vapor deposition. The present technique enables formation of either aligned, atomically thin two-dimensional (2D) sheets or random networks of three-dimensional (3D) bundles, both composed of individual nanowires. These nanowires exhibit an anisotropic 1D optical response and superior conducting properties. The findings not only shed light on the controlled and large-scale synthesis of conductive thin films but also provide a platform for the study on physics and device applications of nanowire-based 2D and 3D crystals.

Control of High-Harmonic Generation by Tuning the Electronic Structure and Carrier Injection.

High-harmonic generation (HHG), which is the generation of light with multiple optical harmonics, is an unconventional nonlinear optical phenomenon beyond the perturbation regime. HHG, which was initially observed in gaseous media, has recently been demonstrated in solid-state materials. Determining how to control such extreme nonlinear optical phenomena is a challenging subject. Here, we demonstrate the control of HHG through tuning the electronic structure and carrier injection using single-walled carbon nanotubes (SWCNTs). We reveal systematic changes in the high-harmonic spectra of SWCNTs with a series of electronic structures ranging from a metal structure to a semiconductor structure. We demonstrate enhancement or reduction of harmonic generation by more than 1 order of magnitude by tuning the electron and hole injection into the semiconductor SWCNTs through electrolyte gating. These results open a path toward the control of HHG in the context of field-effect transistor devices.

High-Resolution Electrochemical Mapping of the Hydrogen Evolution Reaction on Transition-Metal Dichalcogenide Nanosheets.

High-resolution scanning electrochemical cell microscopy (SECCM) is used to image and quantitatively analyze the hydrogen evolution reaction (HER) catalytically active sites of 1H-MoS2 nanosheets, MoS2 , and WS2 heteronanosheets. Using a 20 nm radius nanopipette and hopping mode scanning, the resolution of SECCM was beyond the optical microscopy limit and visualized a small triangular MoS2 nanosheet with a side length of ca. 130 nm. The electrochemical cell provides local cyclic voltammograms with a nanoscale spatial resolution for visualizing HER active sites as electrochemical images. The HER activity difference of edge, terrace, and heterojunction of MoS2 and WS2 were revealed. The SECCM imaging directly visualized the relationship of HER activity and number of MoS2 nanosheet layers and unveiled the heterogeneous aging state of MoS2 nanosheets. SECCM can be used for improving local HER activities by producing sulfur vacancies using electrochemical reaction at the selected region.

Out-of-Plane Strain Induced in a Moiré Superstructure of Monolayer MoS2 and MoSe2 on Au(111).

Making contact of transition metal dichalcogenides (TMDCs) with a metal surface is essential for fabricating and designing electronic devices and catalytic systems. It also generates strain in the TMDCs that plays significant role in both electronic and phonon structures. Therefore, detailed understanding of mechanism of the strain generation is important to fully comprehend the modulation effect for the electronic and phonon properties. Here, MoS2 and MoSe2 monolayers are grown on Au surface by chemical vapor deposition and it is demonstrated that the contact with a crystalline Au(111) surface gives rise to only out-of-plane strain in both MoS2 and MoSe2 layers, whereas no strain generation is observed on polycrystalline Au or SiO2 /Si surfaces. Scanning tunneling microscopy analysis provides information regarding consequent specific adsorption sites between lower S (Se) atoms in the SMoS (SeMoSe) structure and Au atoms via unique moiré superstructure formation for MoS2 and MoSe2 layers on Au(111). This observation indicates that the specific adsorption sites give rise to out-of-plane strain in the TMDC layers. Furthermore, it also leads to effective modulation of the electronic structure of the MoS2 or MoSe2 layer.

Diameter and rigidity of multiwalled carbon nanotubes are critical factors in mesothelial injury and carcinogenesis.

Multiwalled carbon nanotubes (MWCNTs) have the potential for widespread applications in engineering and materials science. However, because of their needle-like shape and high durability, concerns have been raised that MWCNTs may induce asbestos-like pathogenicity. Although recent studies have demonstrated that MWCNTs induce various types of reactivities, the physicochemical features of MWCNTs that determine their cytotoxicity and carcinogenicity in mesothelial cells remain unclear. Here, we showed that the deleterious effects of nonfunctionalized MWCNTs on human mesothelial cells were associated with their diameter-dependent piercing of the cell membrane. Thin MWCNTs (diameter ∼ 50 nm) with high crystallinity showed mesothelial cell membrane piercing and cytotoxicity in vitro and subsequent inflammogenicity and mesotheliomagenicity in vivo. In contrast, thick (diameter ∼ 150 nm) or tangled (diameter ∼ 2-20 nm) MWCNTs were less toxic, inflammogenic, and carcinogenic. Thin and thick MWCNTs similarly affected macrophages. Mesotheliomas induced by MWCNTs shared homozygous deletion of Cdkn2a/2b tumor suppressor genes, similar to mesotheliomas induced by asbestos. Thus, we propose that different degrees of direct mesothelial injury by thin and thick MWCNTs are responsible for the extent of inflammogenicity and carcinogenicity. This work suggests that control of the diameter of MWCNTs could reduce the potential hazard to human health.

Size-selective complexation and extraction of endohedral metallofullerenes with cycloparaphenylene.

A new strategy for the non-chromatographic extraction of metallofullerenes from solutions of arc-processed raw soot is based on the size-selective complexation with cycloparaphenylene (CPP). [11]CPP has a high affinity for Mx @C82 (x=1, 2); for example, Gd@C82 can be selectively extracted from a fullerene mixture by the addition of [11]CPP. This approach should open new opportunities in metallofullerene chemistry, including for the bulk extraction of metallofullerenes.

Single-Gate MoS2 Tunnel FET with a Thickness-Modulated Homojunction.

Two-dimensional (2D) materials stand as a promising platform for tunnel field-effect transistors (TFETs) in the pursuit of low-power electronics for the Internet of Things era. This promise arises from their dangling bond-free van der Waals heterointerface. Nevertheless, the attainment of high device performance is markedly impeded by the requirement of precise control over the 2D assembly with multiple stacks of different layers. In this study, we addressed a thickness-modulated n/p+-homojunction prepared from Nb-doped p+-MoS2 crystal, where the issue on interface traps can be neglected without any external interface control due to the homojunction. Notably, our observations reveal the existence of a negative differential resistance, even at room temperature (RT). This signifies the successful realization of TFET operation under type III band alignment conditions by a single gate at RT, suggesting that the dominant current mechanism is band-to-band tunneling due to the ideal interface.

Nanoscrolls of Janus Monolayer Transition Metal Dichalcogenides.

Tubular structures of transition metal dichalcogenides (TMDCs) have attracted attention in recent years due to their emergent physical properties, such as the giant bulk photovoltaic effect and chirality-dependent superconductivity. To understand and control these properties, it is highly desirable to develop a sophisticated method to fabricate TMDC tubular structures with smaller diameters and a more uniform crystalline orientation. For this purpose, the rolling up of TMDC monolayers into nanoscrolls is an attractive approach to fabricating such a tubular structure. However, the symmetric atomic arrangement of a monolayer TMDC generally makes its tubular structure energetically unstable due to considerable lattice strain in curved monolayers. Here, we report the fabrication of narrow nanoscrolls by using Janus TMDC monolayers, which have an out-of-plane asymmetric structure. Janus WSSe and MoSSe monolayers were prepared by the plasma-assisted surface atom substitution of WSe2 and MoSe2 monolayers, respectively, and then were rolled by solution treatment. The multilayer tubular structures of Janus nanoscrolls were revealed by scanning transmission electron microscopy observations. Atomic resolution elemental analysis confirmed that the Janus monolayers were rolled up with the Se-side surface on the outside. We found that the present nanoscrolls have the smallest diameter of about 5 nm, which is almost the same as the value predicted by the DFT calculation. The difference in work functions between the S- and Se-side surfaces was measured by Kelvin probe force microscopy, which is in good agreement with the theoretical prediction. Strong interlayer interactions and anisotropic optical responses of the Janus nanoscrolls were also revealed by Raman and photoluminescence spectroscopy.

Intraperitoneal administration of tangled multiwalled carbon nanotubes of 15 nm in diameter does not induce mesothelial carcinogenesis in rats.

Multiwalled carbon nanotubes (MWCNTs) have attracted public attention not only for their potential applications in engineering and materials science but also for possible environmental risks. MWCNTs share similar properties with asbestos, a definite human carcinogen causing malignant mesothelioma (MM), in that they are both biopersistent thin fibers with a high aspect ratio. Certain types of MWCNTs do induce MM in animal experiments. Though there are many different types of MWCNTs awaiting use in industry, there is little evidence about what types of MWCNTs present a high risk for MM in vivo. We have previously shown that the diameter of MWCNTs is one of the critical factors for mesothelial injury, which eventually leads to MM. Because of the extensive commercial use of MWCNTs, the properties of MWCNTs that determine carcinogenic activity should be clarified. Here we report that a high dose (10 mg) of a tangled form of pristine MWCNT (with a diameter of 15 nm) did not induce MM after intraperitoneal administration in rats, which were followed for up to 3 years after injection. This observation strengthens our previous finding that the rigidity, diameter, length and surface properties of MWCNTs are important factors in MM induction in vivo.

Self-Limiting Growth of Monolayer Tungsten Disulfide Nanoribbons on Tungsten Oxide Nanowires.

Transition metal dichalcogenides (TMDCs) are promising two-dimensional (2D) materials for next-generation optoelectronic devices; they can also provide opportunities for further advances in physics. Structuring 2D TMDC sheets as nanoribbons has tremendous potential for electronic state modification. However, a bottom-up synthesis of long TMDC nanoribbons with high monolayer selectivity on a large scale has not yet been reported yet. In this study, we successfully synthesized long WxOy nanowires and grew monolayer WS2 nanoribbons on their surface. The supply of source atoms from a vapor-solid bilayer and chemical reaction at the atomic-scale interface promoted a self-limiting growth process. The developed method exhibited a high monolayer selection yield on a large scale and enabled the growth of long (∼100 µm) WS2 nanoribbons with electronic properties characterized by optical spectroscopy and electrical transport measurements. The produced nanoribbons were isolated from WxOy nanowires by mechanical exfoliation and used as channels for field-effect transistors. The findings of this study can be used in future optoelectronic device applications and advanced physics research.

Remote Excitation of Tip-Enhanced Photoluminescence with a Parallel AgNW Coupler.

Tip-enhanced photoluminescence (TEPL) microscopy allows for the correlation of scanning probe microscopic images and photoluminescent spectra at the nanoscale level in a similar way to tip-enhanced Raman scattering (TERS) microscopy. However, due to the higher cross-section of fluorescence compared to Raman scattering, the diffraction-limited background signal generated by far-field excitation is a limiting factor in the achievable spatial resolution of TEPL. Here, we demonstrate a way to overcome this drawback by using remote excitation TEPL (RE-TEPL). With this approach, the excitation and detection positions are spatially separated, minimizing the far-field contribution. Two probe designs are evaluated, both experimentally and via simulations. The first system consists of gold nanoparticles (AuNPs) through photoinduced deposition on a silver nanowire (AgNW), and the second system consists of two offset parallel AgNWs. This latter coupler system shows a higher coupling efficiency and is used to successfully demonstrate RE-TEPL spectral mapping on a MoSe2/WSe2 lateral heterostructure to reveal spatial heterogeneity at the heterojunction.

Structural Diversity of Single-Walled Transition Metal Dichalcogenide Nanotubes Grown via Template Reaction.

Monolayers of transition metal dichalcogenides (TMDs) are an ideal 2D platform for studying a wide variety of electronic properties and potential applications due to their chemical diversity. Similarly, single-walled TMD nanotubes (SW-TMDNTs)-seamless cylinders of rolled-up TMD monolayers-are 1D materials that can exhibit tunable electronic properties depending on both their chirality and composition. However, much less has been explored about their geometrical structures and chemical variations due to their instability under ambient conditions. Here, the structural diversity of SW-TMDNTs templated by boron nitride nanotubes (BNNTs) is reported. The outer surfaces and inner cavities of the BNNTs promote and stabilize the coaxial growth of SW-TMDNTs with various diameters, including few-nanometers-wide species. The chiral indices (n,m) of individual SW-MoS2 NTs are assigned by high-resolution transmission electron microscopy, and statistical analyses reveals a broad chirality distribution ranging from zigzag to armchair configurations. Furthermore, this methodology can be applied to the synthesis of various TMDNTs, such as selenides and alloyed Mo1- x Wx S2 . Comprehensive microscopic and spectroscopic analyses also suggest the partial formation of Janus MoS2(1- x ) Se2 x nanotubes. The BNNT-templated reaction provides a universal platform to characterize the chirality-dependent properties of 1D nanotubes with various electronic structures.

Observation of the photovoltaic effect in a van der Waals heterostructure.

van der Waals (vdW) heterostructures, which can be assembled with various two-dimensional materials, provide a versatile platform for exploring emergent phenomena. Here, we report an observation of the photovoltaic effect in a WS2/MoS2 vdW heterostructure. Light excitation of WS2/MoS2 at a wavelength of 633 nm yields a photocurrent without applying bias voltages, and the excitation power dependence of the photocurrent shows characteristic crossover from a linear to square root dependence. Photocurrent mapping has clearly shown that the observed photovoltaic effect arises from the WS2/MoS2 region, not from Schottky junctions at electrode contacts. Kelvin probe microscopy observations show no slope in the electrostatic potential, excluding the possibility that the photocurrent originates from an unintentionally formed built-in potential.

Multilayer In-Plane Heterostructures Based on Transition Metal Dichalcogenides for Advanced Electronics.

In-plane heterostructures of transition metal dichalcogenides (TMDCs) have attracted much attention for high-performance electronic and optoelectronic devices. To date, mainly monolayer-based in-plane heterostructures have been prepared by chemical vapor deposition (CVD), and their optical and electrical properties have been investigated. However, the low dielectric properties of monolayers prevent the generation of high concentrations of thermally excited carriers from doped impurities. To solve this issue, multilayer TMDCs are a promising component for various electronic devices due to the availability of degenerate semiconductors. Here, we report the fabrication and transport properties of multilayer TMDC-based in-plane heterostructures. The multilayer in-plane heterostructures are formed through CVD growth of multilayer MoS2 from the edges of mechanically exfoliated multilayer flakes of WSe2 or NbxMo1-xS2. In addition to the in-plane heterostructures, we also confirmed the vertical growth of MoS2 on the exfoliated flakes. For the WSe2/MoS2 sample, an abrupt composition change is confirmed by cross-sectional high-angle annular dark-field scanning transmission electron microscopy. Electrical transport measurements reveal that a tunneling current flows at the NbxMo1-xS2/MoS2 in-plane heterointerface, and the band alignment is changed from a staggered gap to a broken gap by electrostatic electron doping of MoS2. The formation of a staggered gap band alignment of NbxMo1-xS2/MoS2 is also supported by first-principles calculations.

High-throughput dry transfer and excitonic properties of twisted bilayers based on CVD-grown transition metal dichalcogenides.

van der Waals (vdW) layered materials have attracted much attention because their physical properties can be controlled by varying the twist angle and layer composition. However, such twisted vdW assemblies are often prepared using mechanically exfoliated monolayer flakes with unintended shapes through a time-consuming search for such materials. Here, we report the rapid and dry fabrication of twisted multilayers using chemical vapor deposition (CVD) grown transition metal chalcogenide (TMDC) monolayers. By improving the adhesion of an acrylic resin stamp to the monolayers, the single crystals of various TMDC monolayers with desired grain size and density on a SiO2/Si substrate can be efficiently picked up. The present dry transfer process demonstrates the one-step fabrication of more than 100 twisted bilayers and the sequential stacking of a twisted 10-layer MoS2 single crystal. Furthermore, we also fabricated hBN-encapsulated TMDC monolayers and various twisted bilayers including MoSe2/MoS2, MoSe2/WSe2, and MoSe2/WS2. The interlayer interaction and quality of dry-transferred, CVD-grown TMDCs were characterized by using photoluminescence (PL), cathodoluminescence (CL) spectroscopy, and cross-sectional electron microscopy. The prominent PL peaks of interlayer excitons can be observed for MoSe2/MoS2 and MoSe2/WSe2 with small twist angles at room temperature. We also found that the optical spectra were locally modulated due to nanosized bubbles, which are formed by the presence of interface carbon impurities. The present findings indicate the widely applicable potential of the present method and enable an efficient search of the emergent optical and electrical properties of TMDC-based vdW heterostructures.

Synthesis and optical properties of WS2 nanotubes with relatively small diameters.

Tungsten disulfide (WS2) nanotubes exhibit various unique properties depending on their structures, such as their diameter and wall number. The development of techniques to prepare WS2 nanotubes with the desired structure is crucial for understanding their basic properties. Notably, the synthesis and characterization of multi-walled WS2 nanotubes with small diameters are challenging. This study reports the synthesis and characterization of small-diameter WS2 nanotubes with an average inner diameter of 6 nm. The optical absorption and photoluminescence (PL) spectra of the as-prepared nanotubes indicate that a decrease in the nanotube diameter induces a red-shift in the PL, suggesting that the band gap narrowed due to a curvature effect, as suggested by theoretical calculations.

Vapor-Phase Indium Intercalation in van der Waals Nanofibers of Atomically Thin W6Te6 Wires.

One-dimensional (1D) conducting materials are of great interest as potential building blocks for integrated nanocircuits. Ternary 1D transition-metal chalcogenides, consisting of M6X6 wires with intercalated A atoms (M = Mo or W; X = S, Se, or Te; A = alkali or rare metals, etc.), have attracted much attention due to their 1D metallic behavior, superconductivity, and mechanical flexibility. However, the conventional solid-state reaction usually produces micrometer-scale bulk crystals, limiting their potential use as nanoscale conductors. Here we demonstrate a versatile method to fabricate indium (In)-intercalated W6Te6 (In-W6Te6) bundles with a nanoscale thickness. We first prepared micrometer-long, crystalline bundles of van der Waals W6Te6 wires using chemical vapor deposition and intercalated In into the crystal via a vapor-phase reaction. Atomic-resolution electron microscopy revealed that In atoms were surrounded by three adjacent W6Te6 wires. First-principles calculations suggested that their wire-by-wire stacking can transform through postgrowth intercalation. Individual In-W6Te6 bundles exhibited metallic behavior, as theoretically predicted. We further identified the vibrational modes by combining polarized Raman spectroscopy and nonresonant Raman calculations.

Fabrication of a carbon-nanotube-based field-effect transistor by microcontact printing.

The fabrication of a field-effect transistor with both channel material and source and drain electrodes made from carbon nanotubes (CNTs) through patterned deposition of CNT films by microcontact printing is described. Surfactant-dispersed single-walled CNTs are first separated into semiconducting and metallic fractions by gel filtration. The semiconducting and metallic CNTs are then sequentially transferred by dendrimer-coated polydimethylsiloxane stamps onto dendrimer-coated silicon wafers following a printing protocol optimized for this purpose. The resulting CNT micropatterns are visualized by atomic force microscopy. Semiconducting as well as metallic CNTs preserve their characteristic electronic properties within the transferred films. A device composed of a rather thick (ca. 5 nm) and densely patterned film of metallic CNTs cross-printed on top of a thinner (ca. 1.5 nm) and less dense film of semiconducting CNTs shows the typical properties of a field-effect transistor with the metallic CNT stripes as electrodes, the semiconductive CNT stripes as channel material, and the silicon substrate as gate electrode.