RESUMEN
Commonly known as a skin pigment, melanin has a vital role in UV radiation protection, primarily acting as a radical scavenger. However, a lesser known natural property of melanin, observed in some melanized organisms, is its capacity to adsorb toxins, including metals and organic molecules. Inspired by this, we set out to generate a synthetic porous melanin that would pave the way to enhancing the natural adsorbent properties of melanin and melanin-like materials. Here, we developed a method for the synthesis of porous polydopamine-based melanin utilizing a mesoporous silica (MS) nanoparticle template and characterized its physical properties. Through the oxidative polymerization of dopamine, followed by the etching of silica, we generated synthetic porous melanin (SPM) with the highest measured surface area of any known polydopamine-based material. The prepared SPM was effective for the uptake of various gases and organophosphate toxins, with the material exhibiting high selectivity for CO2 over CH4 and high potential for ammonia capture. Given the demonstrated advantages provided by synthetic porous melanin and melanin's role as an adsorbent in nature, we anticipate the discovery of porous analogues in biological systems.
Asunto(s)
Melaninas/química , Melaninas/síntesis química , Dióxido de Carbono/química , Indoles/química , Metano/química , Polímeros/química , PorosidadRESUMEN
Melanin is a ubiquitous natural pigment found in a diverse array of organisms. Allomelanin is a class of nitrogen-free melanin often found in fungi. Herein, we find artificial allomelanin analogues exhibit high intrinsic microporosity and describe an approach for further increasing and tuning that porosity. Notably, the synthetic method involves an oxidative polymerization of 1,8-DHN in water, negating the need for multiple complex templating steps and avoiding expensive or complex chemical precursors. The well-defined morphologies of these nanomaterials were elucidated by a combination of electron microscopy and scattering methods, yielding to high-resolution 3D reconstruction based on small-angle X-ray scattering (SAXS) results. Synthetic allomelanin nanoparticles exhibit high BET areas, up to 860 m2/g, and are capable of ammonia capture up to 17.0 mmol/g at 1 bar. In addition, these nanomaterials can adsorb nerve agent simulants in solution and as a coating on fabrics with high breathability where they prevent breakthrough. We also confirmed that naturally derived fungal melanin can adsorb nerve gas simulants in solution efficiently despite lower porosity than synthetic analogues. Our approach inspires further analysis of yet to be discovered biological materials of this class where melanins with intrinsic microporosity may be linked to evolutionary advantages in relevant organisms and may in turn inspire the design of new high surface area materials.
Asunto(s)
Biopolímeros/química , Melaninas/química , Adsorción , Biopolímeros/metabolismo , Hongos/metabolismo , Melaninas/metabolismo , Nanopartículas/química , Naftoles/química , Naftoles/metabolismo , Paraoxon/química , Paraoxon/metabolismo , Porosidad , Dispersión del Ángulo Pequeño , Difracción de Rayos XRESUMEN
We observe changes in the molecular conductivity of individual oligophenylene-vinylene (OPV) molecules due to interactions with small aromatic molecules. Fluorescence experiments were correlated with scanning tunneling microscopy measurements in order to determine the origin of the observed effect. Both nitrobenzene and 1,4-dinitrobenzene decreased fluorescence intensity and molecular conductivity, while toluene had no effect. The observed changes in the fluorescence and conduction of OPV correlate well with the electron withdrawing ability of the interacting aromatic molecules. These results demonstrate the potential usefulness of OPV as a sensor for aromatic compounds containing electron withdrawing groups.
RESUMEN
BACKGROUND: In the past decade spherical and rod-like viruses have been used for the design and synthesis of new kind of nanomaterials with unique chemical positioning, shape, and dimensions in the nanosize regime. Wild type and genetic engineered viruses have served as excellent templates and scaffolds for the synthesis of hybrid materials with unique properties imparted by the incorporation of biological and organic moieties and inorganic nanoparticles. Although great advances have been accomplished, still there is a broad interest in developing reaction conditions suitable for biological templates while not limiting the material property of the product. RESULTS: We demonstrate the controlled synthesis of copper nanorods and nanowires by electroless deposition of Cu on three types of Pd-activated rod-like viruses. Our aqueous solution-based method is scalable and versatile for biotemplating, resulting in Cu-nanorods 24-46 nm in diameter as measured by transmission electron microscopy. Cu2+ was chemically reduced onto Pd activated tobacco mosaic virus, fd and M13 bacteriophages to produce a complete and uniform Cu coverage. The Cu coating was a combination of Cu0 and Cu2O as determined by X- ray photoelectron spectroscopy analysis. A capping agent, synthesized in house, was used to disperse Cu-nanorods in aqueous and organic solvents. Likewise, reactions were developed to produce Cu-nanowires by metallization of polyaniline-coated tobacco mosaic virus. CONCLUSIONS: Synthesis conditions described in the current work are scalable and amenable for biological templates. The synthesized structures preserve the dimensions and shape of the rod-like viruses utilized during the study. The current work opens the possibility of generating a variety of nanorods and nanowires of different lengths ranging from 300 nm to micron sizes. Such biological-based materials may find ample use in nanoelectronics, sensing, and cancer therapy.
Asunto(s)
Bacteriófago M13/química , Cobre/química , Nanotecnología/métodos , Nanotubos/química , Nanocables/química , Virus del Mosaico del Tabaco/química , Compuestos de Anilina/química , Catálisis , Nanotubos/ultraestructura , Nanocables/ultraestructura , Oxidación-Reducción , Paladio/químicaRESUMEN
A microwave deposition technique for silanes, previously described for production of oleophobic fabrics, is adapted to provide a fabric support material that can be subsequently treated by dip coating. Dip coating with a sol preparation provides a supported porous layer on the fabric. In this case, the porous layer is a porphyrin functionalized sorbent system based on a powdered material that has been demonstrated previously for the capture and conversion of phosgene. A representative coating is applied to cotton fabric at a loading level of 10 mg/g. This coating has minimal impact on water vapor transport through the fabric (93% of the support fabric rate) while significantly reducing transport of 2-chloroethyl ethyl sulfide (CEES) through the material (7% of support fabric rate). The described approaches are suitable for use with other fabrics providing amine and hydroxyl groups for modification and can be used in combination with other sol preparations to produce varying functionality.
Asunto(s)
Compuestos de Organosilicio/química , PorosidadRESUMEN
Here, we report on the development of a genetic system for Marinobacter sp. strain CP1, previously isolated from the Biocathode MCL community and shown to oxidize iron and grow as a cathodic biofilm. Sequence analysis of the small and large subunits of the 16S rRNA gene of CP1, as well as comparison of select conserved proteins, indicate that it is most closely related to Marinobacter adhaerens HP15 and Marinobacter sp. ES.042. In silico DNA-DNA hybridization using the genome-to-genome distance calculator (GGDC) predicts CP1 to be a new species of Marinobacter described here as Marinobacter atlanticus. CP1 is competent for transformation with plasmid DNA using conjugation with Escherichia coli donor strain WM3064 and constitutive expression of green fluorescent protein (GFP) is stable in the absence of antibiotic selection. Targeted double deletion mutagenesis of homologs for the M. aquaeoli fatty acyl-CoA reductase (acrB) and fatty aldehyde reductase (farA) genes resulted in a loss of production of wax esters; however, single deletion mutants for either gene resulted in an increase in total wax esters recovered. Genetic tools presented here for CP1 will enable further exploration of wax ester synthesis for biotechnological applications, as well as furthering our efforts to understand the role of CP1 within the Biocathode MCL community.
RESUMEN
Biodiesel is produced by transesterification of animal fat, vegetable oil, or waste cooking oil with alcohol. After production costs, the economic viability of biodiesel is dependent on what steps are necessary to remove impurities following synthesis and the effectiveness of quality control analysis. Solid-phase extraction offers a potentially advantageous approach in biodiesel processing applications. Nanoporous scaffolds were investigated for adsorption of glycerol, a side product of biodiesel synthesis that is detrimental to engine combustion when present. Materials were synthesized with varying pore wall composition, including ethane and diethylbenzene bridging groups, and sulfonated to promote hydrogen bonding interactions with glycerol. Materials bearing sulfonate groups throughout the scaffold walls as well as those post-synthetically grafted onto the surfaces show notably superior performance for uptake of glycerol. The sorbents are effective when used in biodiesel mixtures, removing greater than 90% of glycerol from a biodiesel preparation.
RESUMEN
Here, the potential of colorimetric sensors utilizing porphyrin indicators for long term environmental monitoring is demonstrated. Prototype devices based on commercial color sensing chips (six per device) were combined with in-house developed algorithms for data analysis. The devices are intended to provide real-time sensing of threats. An initial outdoor data set was collected using prototype devices with occasional spiked exposure to targets. This data was supported by similar data collected in a controlled indoor environment. Weaknesses in the noted performance of the devices during these experiments were addressed through altering device parameters, algorithm parameters, and array element composition. Additional outdoor data sets totaling 1,616 h and indoor data sets totaling 728 h were collected in support of assessing these changes to the system configuration. The optimized system provided receiver operating characteristics (ROC) of specificity 0.97 and sensitivity 1.0.
RESUMEN
Because of the potential health risks of aflatoxin B1 (AFB1), it is essential to monitor the level of this mycotoxin in a variety of foods. An indirect competitive immunoassay has been developed using the NRL array biosensor, offering rapid, sensitive detection and quantification of AFB1 in buffer, corn and nut products. AFB1-spiked foods were extracted with methanol and Cy5-anti-AFB1 added to the resulting sample. The extracted sample/antibody mix was passed over a waveguide surface patterned with immobilized AFB1. The resulting fluorescence signal decreased as the concentration of AFB1 in the sample increased. The limit of detection for AFB1 in buffer, 0.3 ng/ml, was found to increase to between 1.5 and 5.1 ng/g and 0.6 and 1.4 ng/g when measured in various corn and nut products, respectively.
Asunto(s)
Aflatoxina B1/análisis , Técnicas Biosensibles/instrumentación , Análisis de los Alimentos/instrumentación , Contaminación de Alimentos/análisis , Inmunoensayo/instrumentación , Nueces/química , Zea mays/química , Técnicas Biosensibles/métodos , Diseño de Equipo , Análisis de Falla de Equipo , Inmunoensayo/métodos , Análisis Espectral/instrumentación , Análisis Espectral/métodosRESUMEN
The occurrence of different mycotoxins in cereal products calls for the development of a rapid, sensitive, and reliable detection method that is capable of analyzing samples for multiple toxins simultaneously. In this study, we report the development and application of a multiplexed competitive assay for the simultaneous detection of ochratoxin A (OTA) and deoxynivalenol (DON) in spiked barley, cornmeal, and wheat, as well as in naturally contaminated maize samples. Fluoroimmunoassays were performed with the Naval Research Laboratory array biosensor, by both a manual and an automated version of the system. This system employs evanescent-wave fluorescence excitation to probe binding events as they occur on the surface of a waveguide. Methanolic extracts of the samples were diluted threefold with buffer containing a mixture of fluorescent antibodies and were then passed over the arrays of mycotoxins immobilized on a waveguide. Fluorescent signals of the surface-bound antibody-antigen complexes decreased with increasing concentrations of free mycotoxins in the extract. After sample analysis was completed, surfaces were regenerated with 6 M guanidine hydrochloride in 50 mM glycine, pH 2.0. The limits of detection determined by the manual biosensor system were as follows: 1, 180, and 65 ng/g for DON and 1, 60, and 85 ng/g for OTA in cornmeal, wheat, and barley, respectively. The limits of detection in cornmeal determined with the automated array biosensor were 15 and 150 ng/g for OTA and DON, respectively.
Asunto(s)
Técnicas Biosensibles/métodos , Grano Comestible/química , Contaminación de Alimentos/análisis , Micotoxinas/aislamiento & purificación , Técnicas Biosensibles/normas , Seguridad de Productos para el Consumidor , Análisis de los Alimentos , Humanos , Micotoxinas/análisis , Ocratoxinas/análisis , Ocratoxinas/aislamiento & purificación , Sensibilidad y Especificidad , Espectrometría de Fluorescencia/métodos , Tricotecenos/análisis , Tricotecenos/aislamiento & purificaciónRESUMEN
"Ligand-free" citrate-stabilized 10 nm gold nanoparticles (AuNPs) promote the hydrolysis of the thiophosphate ester methyl parathion (MeP) on the surface of gold as a function of pH and two temperature values. At 50 °C, the active surface gold atoms show catalytic turnover â¼4 times after 8 h and little turnover of gold surface atoms at 25 °C with only 40% of the total atoms being active. From Michaelis-Menten analysis, k(cat) increases between pH 8 and 9 and decreases above pH 9. A global analysis of the spectral changes confirmed the stoichiometric reaction at 25 °C and the catalytic reaction at 50 °C and mass spectrometry confirmed the identity of p-nitrophenolate (PNP) product. Additional decomposition pathways involving oxidation and hydrolysis independent of the formation of PNP were also seen at 50 °C for both catalyzed and un-catalyzed reactions. This work represents the first kinetic analysis of ligand-free AuNP catalyzed hydrolysis of a thiophosphate ester.
Asunto(s)
Ácido Cítrico/química , Contaminantes Ambientales/química , Oro/química , Nanopartículas del Metal/química , Metil Paratión/química , Tamaño de la Partícula , Catálisis , Concentración de Iones de Hidrógeno , Hidrólisis , Cinética , Oxidación-Reducción , TemperaturaRESUMEN
Sorbent materials were developed utilizing two morphological structures, comprising either hexagonally packed pores (HX) or a disordered pore arrangement (CF). The sorbents were functionalized with combinations of two types of alkylammonium groups. When capture of perchlorate by the sorbents was compared, widely varying performance was noted as a result of differing morphology and/or functional group loading. A material providing improved selectivity for perchlorate over perrhenate was synthesized with a CF material using N-trimethoxysilylpropyl-N,N,N-trimethylammonium chloride. Materials were applied in batch and column formats. Binding isotherms followed the behavior expected for a system in which univalent ligands of varying affinity compete for immobilized sites. Performance of the sorbents was also compared to that of commercial Purolite materials.
RESUMEN
Assembling and interconnecting the building blocks of nanoscale devices and being able to electronically address or measure responses at the molecular level remains an important challenge for nanotechnology. Here we show the usefulness of bottom-up self-assembly for building electronic nanosensors from multiple components that have been designed to interact in a controlled manner. Cowpea mosaic virus was used as a scaffold to control the positions of gold nanoparticles. The nanoparticles were then interconnected using thiol-terminated conjugated organic molecules, resulting in a three-dimensional conductive network. Biotin molecules were attached to the virus scaffold using linkers to act as molecular receptors. We demonstrated that binding avidin to the biotin receptors on the self-assembled nanosensors causes a significant change in the network conductance that is dependent on the charge of the avidin protein.
Asunto(s)
Técnicas Biosensibles/métodos , Comovirus , Nanopartículas del Metal , Avidina , Biotina , Proteínas de la Cápside/química , Proteínas de la Cápside/genética , Comovirus/química , Comovirus/genética , Conductividad Eléctrica , Oro , Mutación , NanotecnologíaRESUMEN
In this work, we examine the dependence of the fluorescence quantum yield of water-soluble CdSe/ZnS quantum dots on the local environment. The hydrophobicity of the local environment was modified by using different alkyl chain lengths in a set of oligo-ethylene glycols. Our results show that the quantum yield of CdSe/ZnS quantum dots is highest for the longest alkyl chain length, suggesting that a more hydrophobic environment is beneficial for generating bright, water-soluble quantum dots.
Asunto(s)
Química/métodos , Fluorescencia , Puntos Cuánticos , Compuestos de Cadmio/química , Glicoles/química , Concentración de Iones de Hidrógeno , Ensayo de Materiales , Modelos Químicos , Nanotecnología/métodos , Compuestos de Selenio/química , Solubilidad , Compuestos de Sulfhidrilo/química , Sulfuros/química , Propiedades de Superficie , Tioglicolatos/química , Agua/química , Compuestos de Zinc/químicaRESUMEN
Deoxynivalenol (DON), a mycotoxin produced by several Fusaruim species, is a worldwide contaminant of foods and feeds. Because of the potential dangers due to accidental or intentional contamination of foods with DON, there is a need to develop a rapid and highly sensitive method for easy identification and quantification of DON. In this study, we have developed and utilized a competitive immunoassay technique to detect DON in various food matrixes and indoor air samples using an array biosensor. A DON-biotin conjugate, immobilized on a NeutrAvidin-coated optical waveguide, competed with the DON in the sample for binding to fluorescently labeled DON monoclonal antibodies. To demonstrate a simple procedure amenable for on-site use, DON-spiked cornmeal, cornflakes, wheat, barley, and oats were extracted with methanol-water (3:1) and assayed without cleanup or preconcentration. The limits of detection ranged from 0.2 ng/mL in buffer to 50 ng/g in oats. The detection limit of DON spiked into an aqueous effluent from an air sampler was 4 ng/mL.
Asunto(s)
Contaminación del Aire Interior , Técnicas Biosensibles , Análisis de los Alimentos , Tricotecenos/análisis , Espectrometría de FluorescenciaRESUMEN
The study of charge transport through increasingly complex small molecules will benefit from a detailed understanding of how contaminants from the environment affect molecular conduction. This should provide a clearer picture of the electronic characteristics of molecules by eliminating interference from adsorbed species. Here we use magnetically assembled microsphere junctions incorporating thiol monolayers to provide insight into changing electron transport characteristics resulting from exposure to air. Using this technique, current-voltage analysis and inelastic electron tunnelling spectroscopy (IETS) demonstrate that the primary interaction affecting molecular conduction is rapid hydration at the gold-sulphur contacts. We use IETS to present evidence for changing mechanisms of charge transport as a result of this interaction. The detrimental effects on molecular conduction discussed here are important for understanding electron transport through gold-thiol molecular junctions once exposed to atmospheric conditions.
Asunto(s)
Electroquímica/métodos , Electrodos , Oro/química , Compuestos de Sulfhidrilo/química , Azufre/química , Agua/química , Transporte de ElectrónRESUMEN
Contamination of food by mycotoxins occurs in minute quantities, and therefore, there is a need for a highly sensitive and selective device that can detect and quantify these organic toxins. We report the development of a rapid and highly sensitive array biosensor for the detection and quantitation of ochratoxin A (OTA). The array biosensor utilizes a competitive immunoassay format. Immobilized OTA derivatives compete with toxin in solution for binding to fluorescent anti-OTA antibody spiked into the sample. This competition is quantified by measuring the formation of the fluorescent immunocomplex on the waveguide surface. The fluorescent signal is inversely proportional to the concentration of OTA in the sample. Analyses for OTA in buffer and a variety of food and beverage samples were performed. Samples were extracted with methanol, without any sample cleanup or preconcentration step prior to analysis. The limit of detection for OTA in several cereals ranged from 3.8 to 100 ng/g, while in coffee and wine, detection limits were 7 and 38 ng/g, respectively.
Asunto(s)
Bebidas/microbiología , Técnicas Biosensibles/métodos , Grano Comestible/microbiología , Ocratoxinas/análisis , Bebidas/análisis , Grano Comestible/química , Inmunoensayo , Sensibilidad y EspecificidadRESUMEN
Current-voltage (I-V) characteristics for metal-molecule-metal junctions formed from three classes of molecules measured with a simple crossed-wire molecular electronics test-bed are reported. Junction conductance as a function of molecular structure is consistent with I-V characteristics calculated from extended Hückel theory coupled with a Green's function approach, and can be understood on the basis of bond-length alternation.
RESUMEN
To investigate the electrical characteristics of organometallic complexes as molecular conductors, organometallic pi-conjugated molecules of the type trans-[PtL2(CCC6H4SAc-4)2], where L = PCy3, PBu3, PPh3, P(OEt)3, P(OPh)3, were synthesized and characterized by NMR, IR, UV, and X-ray spectroscopies. For the three complexes (L = PCy3, PPh3, and P(OEt)3) that could be measured using a cross-wire junction technique, the current-voltage (I-V) characteristics of a molecular monolayer of these complexes showed no ligand effect, despite spectroscopic evidence that electronic interaction between the phosphine ligands and the pi-system does occur. It was concluded that the tunneling efficiency across the molecule is the determining factor for conduction in this metal-molecule-metal system. It was also shown that the incorporation of a transition metal in pi-conjugated molecular wires does not adversely affect charge transport compared to all-carbon pi-conjugated molecular wires.