Functional response and mutual interference in the parasitoid Coptera haywardi (Oglobin) (Hymenoptera: Diapriidae) attacking Anastrepha ludens (Loew) (Diptera: Tephritidae) pupae.

Functional response and mutual interference are important attributes of natural enemies that should be analysed in species with the potential to be used as biological control agents in order to increase the predictive power of the possible benefits and/or consequences of their release in the field. Our main objective was to determine the functional response and mutual interference of Coptera haywardi (Oglobin), a pupal parasitoid of economically important fruit flies (Diptera: Tephritidae). The functional response of C. haywardi on A. ludens pupae corresponded to a type II model, with an attack rate of 0.0134 host pupa/h and a handling time of 1.843 h, which reveals a meticulous selection process of pupal hosts. The effect of mutual interference among foraging females was negatively correlated with increased parasitoid density in the experimental arena, showing a gradual decline in attack rate per individual female. The increase in the number of foraging females also had an impact on the number of oviposition scars per pupa and the number of immature parasitoids per dissected pupa, but not on the percentage of adult emergence or the sex ratio. Our results suggest that C. haywardi could act as a complementary parasitoid in the control of fruit fly pupae, since the random distribution of these pupae in the soil would decrease the possibility of aggregation and mutual interference between foraging females.

Development of a Machine-Learning Model for Anterior Knee Pain After Total Knee Arthroplasty With Patellar Preservation Using Radiological Variables.

BACKGROUND: Anterior knee pain (AKP) following total knee arthroplasty (TKA) with patellar preservation is a common complication that significantly affects patients' quality of life. This study aimed to develop a machine-learning model to predict the likelihood of developing AKP after TKA using radiological variables. METHODS: A cohort of 131 anterior stabilized TKA cases (105 patients) without patellar resurfacing was included. Patients underwent a follow-up evaluation with a minimum 1-year follow-up. The primary outcome was AKP, and radiological measurements were used as predictor variables. There were 2 observers who made the radiological measurement, which included lower limb dysmetria, joint space, and coronal, sagittal, and axial alignment. Machine-learning models were applied to predict AKP. The best-performing model was selected based on accuracy, precision, sensitivity, specificity, and Kappa statistics. Python 3.11 with Pandas and PyCaret libraries were used for analysis. RESULTS: A total of 35 TKA had AKP (26.7%). Patient-reported outcomes were significantly better in the patients who did not have AKP. The Gradient Boosting Classifier performed best for both observers, achieving an area under the curve of 0.9261 and 0.9164, respectively. The mechanical tibial slope was the most important variable for predicting AKP. The Shapley test indicated that high/low mechanical tibial slope, a shorter operated leg, a valgus coronal alignment, and excessive patellar tilt increased AKP risk. CONCLUSIONS: The results suggest that global alignment, including sagittal, coronal, and axial alignment, is relevant in predicting AKP after TKA. These findings provide valuable insights for optimizing TKA outcomes and reducing the incidence of AKP.

Engaging the community served: a U.S. Cancer Center's Facebook live cancer awareness campaign for Spanish-speaking Latinos during COVID-19.

Cancer is the leading cause of mortality in U.S. Latino adults, a group with limited access to screening, higher rates of advanced disease, and prone to online misinformation. Our project created a Facebook Live social media video campaign on general cancer prevention, screening, risk, information, and resources, targeting Spanish-monolingual Latinos during the COVID-19 pandemic. Content was delivered in Spanish by fluent, ethnically concordant topic experts and cancer center staff. Four prerecorded and three livestream interview videos were produced, amassing over 161 shares, 1,000 engagements, 12,000 views, 19,000 people reached, and 34,000 impressions in a span of four months. Strengths of this project included developing community partnerships and collaborations, providing evidence-based cancer information in a culturally responsive manner to often-excluded community members during COVID-19 pandemic, and presenting our cancer center as an accessible resource to the wider community. Future directions include formalizing evaluation strategies to capture medical engagement via cancer screening and detection rates, delivering focused cancer discussions by disease sites, and further expanding audience base through mixed media formats.

Two-Component System Sensor Kinases from Asgardian Archaea May Be Witnesses to Eukaryotic Cell Evolution.

The signal transduction paradigm in bacteria involves two-component systems (TCSs). Asgardarchaeota are archaea that may have originated the current eukaryotic lifeforms. Most research on these archaea has focused on eukaryotic-like features, such as genes involved in phagocytosis, cytoskeleton structure, and vesicle trafficking. However, little attention has been given to specific prokaryotic features. Here, the sequence and predicted structural features of TCS sensor kinases analyzed from two metagenome assemblies and a genomic assembly from cultured Asgardian archaea are presented. The homology of the sensor kinases suggests the grouping of Lokiarchaeum closer to bacterial homologs. In contrast, one group from a Lokiarchaeum and a meta-genome assembly from Candidatus Heimdallarchaeum suggest the presence of a set of kinases separated from the typical bacterial TCS sensor kinases. AtoS and ArcB homologs were found in meta-genome assemblies along with defined domains for other well-characterized sensor kinases, suggesting the close link between these organisms and bacteria that may have resulted in the metabolic link to the establishment of symbiosis. Several kinases are predicted to be cytoplasmic; some contain several PAS domains. The data shown here suggest that TCS kinases in Asgardian bacteria are witnesses to the transition from bacteria to eukaryotic organisms.

Social behavior for autonomous vehicles.

Deployment of autonomous vehicles on public roads promises increased efficiency and safety. It requires understanding the intent of human drivers and adapting to their driving styles. Autonomous vehicles must also behave in safe and predictable ways without requiring explicit communication. We integrate tools from social psychology into autonomous-vehicle decision making to quantify and predict the social behavior of other drivers and to behave in a socially compliant way. A key component is Social Value Orientation (SVO), which quantifies the degree of an agent's selfishness or altruism, allowing us to better predict how the agent will interact and cooperate with others. We model interactions between agents as a best-response game wherein each agent negotiates to maximize their own utility. We solve the dynamic game by finding the Nash equilibrium, yielding an online method of predicting multiagent interactions given their SVOs. This approach allows autonomous vehicles to observe human drivers, estimate their SVOs, and generate an autonomous control policy in real time. We demonstrate the capabilities and performance of our algorithm in challenging traffic scenarios: merging lanes and unprotected left turns. We validate our results in simulation and on human driving data from the NGSIM dataset. Our results illustrate how the algorithm's behavior adapts to social preferences of other drivers. By incorporating SVO, we improve autonomous performance and reduce errors in human trajectory predictions by 25%.

Low-Velocity Loss Induces Similar Strength Gains to Moderate-Velocity Loss During Resistance Training.

ABSTRACT: Galiano, C, Pareja-Blanco, F, Hidalgo de Mora, J, and Sáez de Villarreal, E. Low-velocity loss induces similar strength gains to moderate-velocity loss during resistance training. J Strength Cond Res 36(2): 340-345, 2022-This study aimed to analyze the effects of 2 velocity-based resistance training (VBT) programs that used the same relative loading but differed in the velocity loss (VL) throughout the set: 5% (VL5) vs. 20% (VL20). Twenty-eight physically active men (age: 23.0 ± 3.2 years; height: 175.8 ± 4.7 cm; body mass: 73.8 ± 10.8 kg) were randomly assigned to 2 groups: VL5 (n = 15) or VL20 (n = 13). Subjects followed a 7-week (14 sessions) VBT program using the squat exercise while repetition velocity was monitored. The following variables were assessed at pretest and posttest: estimated 1-repetition maximum (1RM); average velocity attained for all absolute loads common to pretest and posttest (AV); average velocity for those loads that were moved faster than 1 m·s-1 (AV > 1); average velocity for those loads that were moved slower than 1 m·s-1 (AV < 1); countermovement jump (CMJ); and 20-m running sprint time (T20). T20 and CMJ height were assessed before each training session to analyze their evolution during the training program. The VL5 group executed only 32.6% of the total repetitions performed by the VL20 group (156.9 ± 25.0 vs. 480.5 ± 162.0 rep). Both groups improved significantly (p < 0.01) in all variables analyzed (1RM, AV, AV > 1, AV < 1, CMJ, and T20) from pretest to posttest, with no significant differences between them. Therefore, a low VL (5%) induced similar gains in strength, jump, and sprint performance to a moderate VL of 20%, despite VL5 performing only 32.6% of the repetitions achieved by the VL20 group.

Sensory and physicochemical analysis of honeys of nine stingless bee species of Mexico and Guatemala.

Honeys produced by species other than Apis mellifera are little known. The objective of this study was to carry out sensory and physicochemical analyses of 62 samples to characterize honeys from nine species of stingless bees from Mexico and Guatemala. Analyses were performed at the sensory level and at the physicochemical level. Qualitative and quantitative data were studied using the multivariate non-metric multidimensional scaling (NMDS) statistical technique, with the Gower metric. According to the stress value (p > 0.2), the most significant parameters were at the sensory level, for visual evaluation, physical state, color, and appearance; for olfactory-taste evaluation, elemental sweet and acid tastes; for tactile evaluation, consistency, and crystallization, and for physicochemical evaluation, pH, electrical conductivity and reducing sugars. Data analysis showed that Melipona beecheii honeys formed a defined group, with similar sensory characteristics and physicochemical values, even taking into account their place of origin. Frieseomelitta nigra honeys also showed significant differences with the other honeys analyzed. Our work suggests that the entomological origin is the main factor that determines the characteristics of honey, and that the floral origin is the secondary factor, a hypothesis that should be verified in future works.

Modulation of the Enzymatic Activity of the Flagellar Lytic Transglycosylase SltF by Rod Components and the Scaffolding Protein FlgJ in Rhodobacter sphaeroides.

Macromolecular cell-envelope-spanning structures such as the bacterial flagellum must traverse the cell wall. Lytic transglycosylase enzymes are capable of enlarging gaps in the peptidoglycan meshwork to allow the efficient assembly of supramolecular complexes. In the periplasmic space, the assembly of the flagellar rod requires the scaffold protein FlgJ, which includes a muramidase domain in the canonical models Salmonella enterica and Escherichia coli. In contrast, in Rhodobacter sphaeroides, FlgJ and the dedicated flagellar lytic transglycosylase SltF are separate entities that interact in the periplasm. In this study, we show that sltF is expressed, along with the genes encoding the early components of the flagellar hierarchy that include the hook-basal body proteins, making SltF available during the rod assembly. Protein-protein interaction experiments demonstrated that SltF interacts with the rod proteins FliE, FlgB, FlgC, FlgF, and FlgG through its C-terminal region. A deletion analysis that divides the C terminus in two halves revealed that the interacting regions for most of the rod proteins are not redundant. Our results also show that the presence of the rod proteins FliE, FlgB, FlgC, and FlgF displace the previously reported SltF-FlgJ interaction. In addition, we observed modulation of the transglycosylase activity of SltF mediated by FlgB and FlgJ that could be relevant to coordinate rod assembly with cell wall remodeling. In summary, different mechanisms regulate the flagellar lytic transglycosylase, SltF, ensuring a timely transcription, a proper localization and a controlled enzymatic activity. IMPORTANCE Several mechanisms participate in the assembly of cell-envelope-spanning macromolecular structures. The sequential expression of substrates to be exported, selective export, and a specific order of incorporation are some of the mechanisms that stand out to drive an efficient assembly process. Here, we analyze how the structural rod proteins, the scaffold protein FlgJ and the flagellar lytic enzyme SltF, interact in an orderly fashion to assemble the flagellar rod into the periplasmic space. A complex arrangement of transient interactions directs a dedicated flagellar muramidase toward the flagellar rod. All of these interactions bring this protein to the proximity of the peptidoglycan wall while also modulating its enzymatic activity. This study suggests how a dynamic network of interactions participates in controlling SltF, a prominent component for flagellar formation.

Does body size influence mating success? A morphometric study of two Anastrepha (Diptera: Tephritidae) fruit fly species.

Male mating success depends on various traits and factors, and correctly identifying these traits can be key in the context of pest management. For tephritid pests, controlled through the sterile insect technique (SIT) traits, such as male size, can be manipulated through mass-rearing procedures. Thus, it is particularly important to understand whether male size can favor mating success. Here, we evaluated mating success of males of different sizes in Anastrepha ludens and Anastrepha obliqua, two species controlled through SIT. For both species, a morphometric analysis was performed of mated and unmated mass-reared and wild males in field cages. In both A. ludens and A. obliqua, wild females did not discriminate their mates based on male size and mated more frequently with wild males regardless of size. For mass-reared males, we found no evidence of an advantage of the large males compared to small males in mating success. However, we did find differences between the morphometric traits of mass-reared and wild males. In A. ludens, traits associated to mating success were Face Width (FW), Head Width (HW), Thorax Length (TL) and Wing Length (WL), and for A. obliqua were FW, HW, WL and WW (Wing Width). Overall, FW and TL were more consistent predictors of mating success. In conclusion, female choice seems to suggest multivariate selection, confirming that overall body size (expressed as pupal diameter, which is highly correlated with weight) is not a decisive factor in male mating success in these two species. However, morphological traits such as FW, HW, TL, WL and WW may be relevant in mating preference of wild female.

Brevipalpus mites associated with coffee plants (Coffea arabica and C. canephora) in Chiapas, Mexico.

Tenuipalpid mites of the genus Brevipalpus are of significant economic and quarantine importance in agriculture. They can damage and vector phytopathogenic viruses in coffee plantations and other crops. In this study, we focused on: identification of the Brevipalpus species, assessment of the spread of Brevipalpus-associated viruses (CoRSV, CiLV-N, CiLVC and CiLVC2), and mite population fluctuations over the course of 1 year. The study was conducted in coffee plantations in Soconusco, a coffee-producing region in Chiapas, Mexico. The collected mites of the Brevipalpus phoenicis sensu lato species complex (635) were identified as Brevipalpus papayensis (80.2%) and B. yothersi (19.8%) based on morphological and molecular characteristics. Their population abundance was low and there were no indications for virosis. The highest mite abundance was recorded in August-September and the lowest in February-March. An interaction was observed between mite abundance and coffee species in open-growth and shaded cultivation at various altitudes. Brevipalpus papayensis was most abundant in Coffea arabica var. Bourbon, in shaded (80%) growing conditions at an altitude of 1300 m above sea level. In C. canephora (in open-growth cultivation conditions at low altitude), B. yothersi was more abundant than in C. arabica, and as abundant as B. papayensis. We are of the opinion that, at this moment, B. papayensis and B. yothersi do not present risks to the production of coffee for the studied plantations. However, as the coffee-producing regions of Mexico are ecologically diverse, it will be important to continue examining the status of Brevipalpus mite populations in other regions in Mexico.

A Trapezoidal Octacyanoquinoid Acceptor Forms Solution and Surface Products by Antiparallel Shape Fitting with Conformational Dipole Momentum Switch.

A new compound (1) formed by two antiparallelly disposed tetracyano thienoquinoidal units has been synthesized and studied by electrochemistry, UV/Vis-NIR, IR, EPR, and transient spectroscopy. Self-assembly of 1 on a Au(111) surface has been investigated by scanning tunneling microscopy. Experiments have been rationalized by quantum chemical calculations. 1 exhibits a unique charge distribution in its anionic form, with a gradient of charge yielding a neat molecular in-plane electric dipole momentum, which transforms out-of-plane after surface deposition due to twisted→folded conformational change and to partial charge transfer from Au(111). Intermolecular van der Waals interactions and antiparallel trapezoidal shape fitting lead to the formation of an optimal dense on Au(111) two-dimensional assembly of 1.

Homo and Hetero Molecular 3D Nanographenes Employing a Cyclooctatetraene Scaffold.

Two novel homo and hetero three-dimensional nanographenes, NG1 and NG2, featuring a cyclooctatetraene core are designed, synthesized, and characterized. A concise and efficient bottom-up methodology was employed during which 24 new carbon-carbon bonds were formed. By means of a Scholl reaction nanographenes with 53 fused rings are realized, which exhibited good solubility in common organic solvents. The resulting saddle-like structures of NG1 and NG2 are electron-rich and show good chemical and electrochemical stability. Their molecular structures are fully elucidated by single-crystal X-ray crystallography. From their crystal structure analysis is concluded that both nanographenes are chiral and crystallize as a racemic mixture. Our work was rounded-off by excited state investigations such as electron and energy transfer with electron-acceptors and -donors.

Azatruxene-Based, Dumbbell-Shaped, Donor-π-Bridge-Donor Hole-Transporting Materials for Perovskite Solar Cells.

Three novel donor-π-bridge-donor (D-π-D) hole-transporting materials (HTMs) featuring triazatruxene electron-donating units bridged by different 3,4-ethylenedioxythiophene (EDOT) π-conjugated linkers have been synthesized, characterized, and implemented in mesoporous perovskite solar cells (PSCs). The optoelectronic properties of the new dumbbell-shaped derivatives (DTTXs) are highly influenced by the chemical structure of the EDOT-based linker. Red-shifted absorption and emission and a stronger donor ability were observed in passing from DTTX-1 to DTTX-2 due to the extended π-conjugation. DTTX-3 featured an intramolecular charge transfer between the external triazatruxene units and the azomethine-EDOT central scaffold, resulting in a more pronounced redshift. The three new derivatives have been tested in combination with the state-of-the-art triple-cation perovskite [(FAPbI3 )0.87 (MAPbBr3 )0.13 ]0.92 [CsPbI3 ]0.08 in standard mesoporous PSCs. Remarkable power conversion efficiencies of 17.48 % and 18.30 % were measured for DTTX-1 and DTTX-2, respectively, close to that measured for the benchmarking HTM spiro-OMeTAD (18.92 %), under 100 mA cm-2 AM 1.5G solar illumination. PSCs with DTTX-3 reached a PCE value of 12.68 %, which is attributed to the poorer film formation in comparison to DTTX-1 and DTTX-2. These PCE values are in perfect agreement with the conductivity and hole mobility values determined for the new compounds and spiro-OMeTAD. Steady-state photoluminescence further confirmed the potential of DTTX-1 and DTTX-2 for hole-transport applications as an alternative to spiro-OMeTAD.

Tetrasubstituted Thieno[3,2-b]thiophenes as Hole-Transporting Materials for Perovskite Solar Cells.

Three hole-transporting materials (HTMs) were prepared following a straightforward synthetic route by cross-linking arylamine-based ligands with a simple thieno[3,2-b]thiophene (TbT) core. The novel HTMs were fully characterized with standard techniques to gain insight into their optical and electrochemical properties and were incorporated in solution-processed mesoporous (FAPbI3)0.85(MAPbBr3)0.15 perovskite-based solar cells. The similar molecular structure of the synthesized HTMs was leveraged to investigate the role that the bridging units between the conjugated TbT core and the peripheral arylamine units plays on their properties and thereby on the photovoltaic response. A remarkable power conversion efficiency exceeding 18% was achieved for one of the TbT derivatives, which was slightly higher than the value measured for the benchmark spiro-OMeTAD.

Effects of velocity loss in the bench press exercise on strength gains, neuromuscular adaptations, and muscle hypertrophy.

OBJECTIVE: This study aimed to compare the effects of four velocity-based training (VBT) programs in bench press (BP) between a wide range of velocity loss (VL) thresholds-0% (VL0), 15% (VL15), 25% (VL25), and 50% (VL50)-on strength gains, neuromuscular adaptations, and muscle hypertrophy. METHODS: Sixty-four resistance-trained young men were randomly assigned into four groups (VL0, VL15, VL25, and VL50) that differed in the VL allowed in each set. Subjects followed a VBT program for 8-weeks using the BP exercise. Before and after the VBT program the following tests were performed: (a) cross-sectional area (CSA) measurements of pectoralis major (PM) muscle; (b) maximal isometric test; (c) progressive loading test; and (d) fatigue test. RESULTS: Significant group x time interactions were observed for CSA (P < .01) and peak root mean square in PM (peak RMS-PM, P < .05). VL50 showed significantly greater gains in CSA than VL0 (P < .05). Only the VL15 group showed significant increases in peak RMS-PM (P < .01). Moreover, only VL0 showed significant gains in the early rate of force development (RFD, P = .05), while VL25 and VL50 improved in the late RFD (P ≤ .01-.05). No significant group × time interactions were found for any of the dynamic strength variables analyzed, although all groups showed significant improvements in all these parameters. CONCLUSION: Higher VL thresholds allowed for a greater volume load which maximized muscle hypertrophy, whereas lower VL thresholds evoked positive neuromuscular-related adaptations. No significant differences were found between groups for strength gains, despite the wide differences in the total volume accumulated by each group.

On-demand high-capacity ride-sharing via dynamic trip-vehicle assignment.

Ride-sharing services are transforming urban mobility by providing timely and convenient transportation to anybody, anywhere, and anytime. These services present enormous potential for positive societal impacts with respect to pollution, energy consumption, congestion, etc. Current mathematical models, however, do not fully address the potential of ride-sharing. Recently, a large-scale study highlighted some of the benefits of car pooling but was limited to static routes with two riders per vehicle (optimally) or three (with heuristics). We present a more general mathematical model for real-time high-capacity ride-sharing that (i) scales to large numbers of passengers and trips and (ii) dynamically generates optimal routes with respect to online demand and vehicle locations. The algorithm starts from a greedy assignment and improves it through a constrained optimization, quickly returning solutions of good quality and converging to the optimal assignment over time. We quantify experimentally the tradeoff between fleet size, capacity, waiting time, travel delay, and operational costs for low- to medium-capacity vehicles, such as taxis and van shuttles. The algorithm is validated with ∼3 million rides extracted from the New York City taxicab public dataset. Our experimental study considers ride-sharing with rider capacity of up to 10 simultaneous passengers per vehicle. The algorithm applies to fleets of autonomous vehicles and also incorporates rebalancing of idling vehicles to areas of high demand. This framework is general and can be used for many real-time multivehicle, multitask assignment problems.

Interaction Between Beauveria bassiana (Hypocreales: Cordycipitaceae) and Coptera haywardi (Hymenoptera: Diapriidae) for the Management of Anastrepha obliqua (Diptera: Tephritidae).

The interaction between the entomopathogenic fungus Beauveria bassiana (Balsamo) and the parasitoid Coptera haywardi (Oglobin), as potential biological control agents for Anastrepha obliqua (Macquart) fruit flies, was evaluated under laboratory and semi-protected field cage conditions. The effects of the parasitoids and fungus were individually and jointly assessed in Plexiglas cages. Application of B. bassiana dry conidia to soil produced 40% mortality in A. obliqua adults. However, mortality was lower (21.2%) on evaluation under field cage conditions. According to the multiple decrement life table analysis, the probability of death of A. obliqua was 88% when C. haywardi parasitoids and B. bassiana conidia were used in conjunction, 89% when only C. haywardi parasitoids were released and 23% when only B. bassiana conidia were applied. These results demonstrate that no synergistic, additive or antagonistic interaction took place with the simultaneous use of these natural enemies, since the presence of B. bassiana had no effect on the C. haywardi parasitism. These results indicate that the parasitoid is a better natural enemy for the control of A. obliqua, and show that, although the two biological control agents can be used simultaneously, their joint application will not produce increased control.

Hole transporting materials for perovskite solar cells: a chemical approach.

Photovoltaic solar cells based on perovskites have come to the forefront in science by achieving exceptional power conversion efficiencies (PCEs) in less than a decade of research. This "still young" generation of solar cells is currently rivalling, in PCEs, well-established technologies, such as cadmium telluride (CdTe) and silicon. Further improvements in device stability by means of innovative materials are yet to come, with technology becoming closer to meeting the market requirements. Emerging from this groundbreaking discovery, a great number of charge transporting materials have flourished, which is particularly true for hole transporting materials (HTMs). The huge number of molecules prepared stem from design and engineering of a wide variety of new and also chemically modified old molecules where organic synthesis has played a fundamental role. In this review, the contribution of chemistry through those synthetic protocols used for producing new and innovative HTMs from relatively simple organic molecules is presented in a rational and systematic manner. The variety and impact of synthetic strategies followed, the structure-property relationship and stability, conductivity and device performance are highlighted from a chemical viewpoint.

Biochemical and Phylogenetic Study of SltF, a Flagellar Lytic Transglycosylase from Rhodobacter sphaeroides.

In this work, we have characterized the soluble lytic transglycosylase (SltF) from Rhodobacter sphaeroides that interacts with the scaffolding protein FlgJ in the periplasm to open space at the cell wall peptidoglycan heteropolymer for the emerging rod. The characterization of the genetic context of flgJ and sltF in alphaproteobacteria shows that these two separate genes coexist frequently in a flagellar gene cluster. Two domains of unknown function in SltF were studied, and the results show that the deletion of a 17-amino-acid segment near the N terminus does not show a recognizable phenotype, whereas the deletion of 47 and 95 amino acids of the C terminus of SltF disrupts the interaction with FlgJ without affecting the transglycosylase catalytic activity of SltF. These mutant proteins are unable to support swimming, indicating that the physical interaction between SltF and FlgJ is central for flagellar formation. In a maximum likelihood tree of representative lytic transglycosylases, all of the flagellar SltF proteins cluster in subfamily 1F. From this analysis, it was also revealed that the lytic transglycosylases related to the type III secretion systems present in pathogens cluster with the closely related flagellar transglycosylases.IMPORTANCE Flagellar biogenesis is a highly orchestrated event where the flagellar structure spans the bacterial cell envelope. The rod diameter of approximately 4 nm is larger than the estimated pore size of the peptidoglycan layer; hence, its insertion requires the localized and controlled lysis of the cell wall. We found that a 47-residue domain of the C terminus of the lytic transglycosylase (LT) SltF of R. sphaeroides is involved in the recognition of the rod chaperone FlgJ. We also found that in many alphaproteobacteria, the flagellar cluster includes a homolog of SltF and FlgJ, indicating that association of an LT with the flagellar machinery is ancestral. A maximum likelihood tree shows that family 1 of LTs segregates into seven subfamilies.

Did the Romans introduce the Egyptian mongoose (Herpestes ichneumon) into the Iberian Peninsula?

New finds of bones of the Egyptian Mongoose (Herpestes ichneumon), one from Portugal and one from Spain, were directly 14C dated to the first century AD. While the Portuguese specimen was found without connection to the Chalcolithic occupation of the Pedra Furada cave where it was recovered, the Spanish find, collected in the city of Mérida, comes from a ritual pit that also contained three human and 40 dog burials. The finds reported here show that the Egyptian mongoose, contrary to the traditional and predominant view, did not first arrive in the Iberian Peninsula during the Muslim occupation of Iberia. Instead, our findings are consistent with the hypothesis that the species was first introduced by the Romans, or at least sometime during the Roman occupation of Hispania. Therefore, radiocarbon dating of new archaeological finds of bones of the Egyptian Mongoose (Herpestes ichneumon) in the Iberian Peninsula push back the confirmed presence of the species in the region by approximately eight centuries, as the previously oldest dated record is from the ninth century. With these new dates, there are now a total of four 14C dated specimens of Egyptian mongooses from the Iberian Peninsula, and all of these dates fall within the last 2000 years. This offers support for the hypothesis that the presence of the species in Iberia is due to historical introductions and is at odds with a scenario of natural sweepstake dispersal across the Straits of Gibraltar in the Late Pleistocene (126,000-11,700 years ago), recently proposed based on genetic data.