RESUMEN
Background Photon-counting detector (PCD) CT enables ultra-high-resolution lung imaging and may shed light on morphologic correlates of persistent symptoms after COVID-19. Purpose To compare PCD CT with energy-integrating detector (EID) CT for noninvasive assessment of post-COVID-19 lung abnormalities. Materials and Methods For this prospective study, adult participants with one or more COVID-19-related persisting symptoms (resting or exertional dyspnea, cough, fatigue) underwent same-day EID and PCD CT between April 2022 and June 2022. The 1.0-mm EID CT images and, subsequently, 1.0-, 0.4-, and 0.2-mm PCD CT images were reviewed for the presence of lung abnormalities. Subjective and objective EID and PCD CT image quality were evaluated using a five-point Likert scale (-2 to 2) and lung signal-to-noise ratios (SNRs). Results Twenty participants (mean age, 54 years ± 16 [SD]; 10 men) were included. EID CT showed post-COVID-19 lung abnormalities in 15 of 20 (75%) participants, with a median involvement of 10% of lung volume [IQR, 0%-45%] and 3.5 lobes [IQR, 0-5]. Ground-glass opacities and linear bands (10 of 20 participants [50%] for both) were the most frequent findings at EID CT. PCD CT revealed additional lung abnormalities in 10 of 20 (50%) participants, with the most common being bronchiectasis (10 of 20 [50%]). Subjective image quality was improved for 1.0-mm PCD versus 1.0-mm EID CT images (median, 1; IQR, 1-2; P < .001) and 0.4-mm versus 1.0-mm PCD CT images (median, 1; IQR, 1-1; P < .001) but not for 0.4-mm versus 0.2-mm PCD CT images (median, 0; IQR, 0-0.5; P = .26). PCD CT delivered higher lung SNR versus EID CT for 1.0-mm images (mean difference, 0.53 ± 0.96; P = .03) but lower SNR for 0.4-mm versus 1.0-mm images and 0.2-mm vs 0.4-mm images (-1.52 ± 0.68 [P < .001] and -1.15 ± 0.43 [P < .001], respectively). Conclusion Photon-counting detector CT outperformed energy-integrating detector CT in the visualization of subtle post-COVID-19 lung abnormalities and image quality. © RSNA, 2023 Supplemental material is available for this article.
Asunto(s)
COVID-19 , Fotones , Masculino , Adulto , Humanos , Persona de Mediana Edad , Estudios Prospectivos , Fantasmas de Imagen , COVID-19/diagnóstico por imagen , Tomografía Computarizada por Rayos X/métodos , Pulmón/diagnóstico por imagenRESUMEN
OBJECTIVES: In cardiac transplant recipients, non-invasive allograft surveillance for identifying patients at risk for graft failure remains challenging. The fat attenuation index (FAI) of the perivascular adipose tissue in coronary computed tomography angiography (CCTA) predicts outcomes in coronary artery disease in non-transplanted hearts; however, it has not been evaluated in cardiac transplant patients. METHODS: We followed 39 cardiac transplant patients with two or more CCTAs obtained between 2010 and 2021. We performed FAI measurements around the proximal 4 cm segments of the left anterior descending (LAD), right coronary artery (RCA), and left circumflex artery (LCx) using a previously validated methodology. The FAI was analyzed at a threshold of - 30 to - 190 Hounsfield units. RESULTS: FAI measurements were completed in 113 CCTAs, obtained on two same-vendor CT models. Within each CCTA, the FAI values between coronary vessels were strongly correlated (RCA and LAD R = 0.67 (p < 0.0001), RCA and LCx R = 0.58 (p < 0.0001), LAD and LCx R = 0.67 (p < 0.0001)). The FAIs of each coronary vessel between the patient's first and last CCTA completed at 120 kV were also correlated (RCA R = 0.73 (p < 0.0001), LAD R = 0.81 (p < 0.0001), LCx R = 0.55 (p = 0.0069). Finally, a high mean FAI value of all three coronary vessels at baseline (mean ≥ - 71 HU) was predictive of cardiac mortality or re-transplantation, however, not predictive of all cause-mortality. CONCLUSION: High baseline FAI values may identify a higher-risk cardiac transplant population; thus, FAI may support the implementation of CCTA in post-transplant surveillance. KEY POINT: ⢠Perivascular fat attenuation measured with coronary CT is feasible in cardiac transplant patients and may predict cardiac mortality or need for re-transplantation.
Asunto(s)
Enfermedad de la Arteria Coronaria , Trasplante de Corazón , Humanos , Angiografía por Tomografía Computarizada/métodos , Angiografía Coronaria/métodos , Tomografía Computarizada por Rayos X/métodos , Enfermedad de la Arteria Coronaria/diagnóstico por imagen , Enfermedad de la Arteria Coronaria/cirugía , Tejido Adiposo/diagnóstico por imagen , Biomarcadores , Vasos CoronariosRESUMEN
RATIONALE: More than 25 million individuals have heart failure worldwide, with ≈4000 patients currently awaiting heart transplantation in the United States. Donor organ shortage and allograft rejection remain major limitations with only ≈2500 hearts transplanted each year. As a theoretical alternative to allotransplantation, patient-derived bioartificial myocardium could provide functional support and ultimately impact the treatment of heart failure. OBJECTIVE: The objective of this study is to translate previous work to human scale and clinically relevant cells for the bioengineering of functional myocardial tissue based on the combination of human cardiac matrix and human induced pluripotent stem cell-derived cardiomyocytes. METHODS AND RESULTS: To provide a clinically relevant tissue scaffold, we translated perfusion-decellularization to human scale and obtained biocompatible human acellular cardiac scaffolds with preserved extracellular matrix composition, architecture, and perfusable coronary vasculature. We then repopulated this native human cardiac matrix with cardiomyocytes derived from nontransgenic human induced pluripotent stem cells and generated tissues of increasing 3-dimensional complexity. We maintained such cardiac tissue constructs in culture for 120 days to demonstrate definitive sarcomeric structure, cell and matrix deformation, contractile force, and electrical conduction. To show that functional myocardial tissue of human scale can be built on this platform, we then partially recellularized human whole-heart scaffolds with human induced pluripotent stem cell-derived cardiomyocytes. Under biomimetic culture, the seeded constructs developed force-generating human myocardial tissue and showed electrical conductivity, left ventricular pressure development, and metabolic function. CONCLUSIONS: Native cardiac extracellular matrix scaffolds maintain matrix components and structure to support the seeding and engraftment of human induced pluripotent stem cell-derived cardiomyocytes and enable the bioengineering of functional human myocardial-like tissue of multiple complexities.
Asunto(s)
Bioingeniería/métodos , Matriz Extracelular/fisiología , Miocardio/citología , Células Madre Pluripotentes/fisiología , Adulto , Anciano , Diferenciación Celular/fisiología , Femenino , Humanos , Masculino , Persona de Mediana EdadRESUMEN
PURPOSE OF REVIEW: Allogeneic organ transplantation is burdened by donor shortage, graft rejection and adverse effects of lifelong immune suppression. Engineering bioartificial organs from acellular organ scaffolds and patient-derived cells are a new approach to potentially overcome these limitations. RECENT FINDINGS: Decellularized organs yield a scaffold of extracellular matrix on which cells can adhere, integrate and ultimately form functional tissue. Various cell sources are currently used to repopulate acellular scaffolds, however, all have limitations. Patient-derived pluripotent stem cells hold great promise for tissue and organ engineering, when robust and mature cells can be directed in a reliable and safe manner. Finally, to produce mature organotypic tissue from a nonfunctional seeded scaffold, cellular scaffolds are cultured under biomimetic conditions in vitro. Alternatively, organs may be implanted at an immature stage to harness the recipient's body's regenerative capacity. In proof of principle experiments to date, bioengineered small animal organs have shown rudimentary function and maintained patency for limited time when transplanted in vivo. SUMMARY: Recent advances in bioengineering organs raise the hope that we can overcome organ donor shortage and eliminate the need for livelong immunosuppression. However, significant challenges remain in generating mature large-scale donor-like bioartificial organs.
Asunto(s)
Trasplante de Órganos , Animales , Órganos Bioartificiales , Diferenciación Celular , Humanos , Células Madre Pluripotentes/citología , Andamios del Tejido , Trasplante HomólogoRESUMEN
Current reconstruction methods of the laryngotracheal segment fail to replace the complex functions of the human larynx. Bioengineering approaches to reconstruction have been limited by the complex tissue compartmentation of the larynx. We attempted to overcome this limitation by bioengineering laryngeal grafts from decellularized canine laryngeal scaffolds recellularized with human primary cells under one uniform culture medium condition. First, we developed laryngeal scaffolds which were generated by detergent perfusion-decellularization over 9 days and preserved their glycosaminoglycan content and biomechanical properties of a native larynx. After subcutaneous implantations in rats for 14 days, the scaffolds did not elicit a CD3 lymphocyte response. We then developed a uniform culture medium that strengthened the endothelial barrier over 5 days after an initial growth phase. Simultaneously, this culture medium supported airway epithelial cell and skeletal myoblast growth while maintaining their full differentiation and maturation potential. We then applied the uniform culture medium composition to whole laryngeal scaffolds seeded with endothelial cells from both carotid arteries and external jugular veins and generated reendothelialized arterial and venous vascular beds. Under the same culture medium, we bioengineered epithelial monolayers onto laryngeal mucosa and repopulated intrinsic laryngeal muscle. We were then able to demonstrate early muscle formation in an intramuscular transplantation model in immunodeficient mice. We supported formation of three humanized laryngeal tissue compartments under one uniform culture condition, possibly a key factor in developing complex, multicellular, ready-to-transplant tissue grafts. Impact Statement For patients undergoing laryngectomy, no reconstruction methods are available to restore the complex functions of the human larynx. The first promising preclinical results have been achieved with the use of biological scaffolds fabricated from decellularized tissue. However, the complexity of laryngeal tissue composition remains a hurdle to create functional viable grafts, since previously each cell type requires tailored culture conditions. In this study, we report the de novo formation of three humanized laryngeal tissue compartments under one uniform culture condition, a possible keystone in creating vital composite tissue grafts for laryngeal regeneration.
Asunto(s)
Músculos Laríngeos/citología , Laringe/citología , Andamios del Tejido/química , Animales , Diferenciación Celular/fisiología , Proliferación Celular/fisiología , Células Cultivadas , Perros , Células Endoteliales de la Vena Umbilical Humana , Humanos , Masculino , Ratones SCID , Ratas Sprague-Dawley , Ingeniería de Tejidos/métodosRESUMEN
Islet transplantation is superior to extrinsic insulin supplementation in the treating severe Type 1 diabetes. However, its efficiency and longevity are limited by substantial islet loss post-transplantation due to lack of engraftment and vascular supply. To overcome these limitations, we developed a novel approach to bio-fabricate functional, vascularized islet organs (VIOs) ex vivo. We endothelialized acellular lung matrixes to provide a biocompatible multicompartment scaffold with an intact hierarchical vascular tree as a backbone for islet engraftment. Over seven days of culture, islets anatomically and functionally integrated into the surrounding bio-engineered vasculature, generating a functional perfusable endocrine organ. When exposed to supra-physiologic arterial glucose levels in vivo and ex vivo, mature VIOs responded with a physiologic insulin release from the vein and provided more efficient reduction of hyperglycemia compared to intraportally transplanted fresh islets. In long-term transplants in diabetic mice, subcutaneously implanted VIOs achieved normoglycemia significantly faster and more efficiently compared to islets that were transplanted in deviceless fashion. We conclude that ex vivo bio-fabrication of VIOs enables islet engraftment and vascularization before transplantation, and thereby helps to overcome limited islet survival and function observed in conventional islet transplantation. Given recent progress in stem cells, this technology may enable assembly of functional personalized endocrine organs.
Asunto(s)
Diabetes Mellitus Tipo 1/terapia , Islotes Pancreáticos/irrigación sanguínea , Ingeniería de Tejidos/métodos , Animales , Sistema Endocrino/metabolismo , Humanos , Masculino , Ratones Endogámicos C57BL , Ratas Endogámicas LewRESUMEN
Decellularized native extracellular matrix (ECM) biomaterials are widely used in tissue engineering and have reached clinical application as biomesh implants. To enhance their regenerative properties and postimplantation performance, ECM biomaterials could be functionalized via immobilization of bioactive molecules. To facilitate ECM functionalization, we developed a metabolic glycan labeling approach using physiologic pathways to covalently incorporate click-reactive azide ligands into the native ECM of a wide variety of rodent tissues and organs in vivo, and into the ECM of isolated rodent and porcine lungs cultured ex vivo. The incorporated azides within the ECM were preserved after decellularization and served as chemoselective ligands for subsequent bioconjugation via click chemistry. As proof of principle, we generated alkyne-modified heparin, immobilized it onto azide-incorporated acellular lungs, and demonstrated its bioactivity by Antithrombin III immobilization and Factor Xa inhibition. The herein reported metabolic glycan labeling approach represents a novel platform technology for manufacturing click-reactive native ECM biomaterials, thereby enabling efficient and chemoselective functionalization of these materials to facilitate tissue regeneration and repair.
Asunto(s)
Anticoagulantes/química , Materiales Biocompatibles/química , Matriz Extracelular/química , Heparina/química , Polisacáridos/química , Andamios del Tejido/química , Animales , Anticoagulantes/farmacología , Azidas/química , Química Clic/métodos , Matriz Extracelular/ultraestructura , Heparina/farmacología , Pulmón/química , Pulmón/citología , Pulmón/ultraestructura , Masculino , Ratas , Ratas Sprague-Dawley , Coloración y Etiquetado/métodos , PorcinosRESUMEN
AIMS: The interest in cardiac remodelling (REM) has steadily increased during recent years. The aim of this study was to functionally characterize REM following myocardial infarction (MI) in mice using high-end in vivo and ex vivo methods. METHODS AND RESULTS: Myocardial infarction or sham operation was induced in A/J mice. Six weeks later, mice underwent cardiac magnetic resonance imaging and were subsequently sacrificed for ex vivo measurements on the isolated heart. Thereafter, hearts were trichrome stained for infarction size calculation. Magnetic resonance imaging showed significantly reduced ejection fraction (P < 0.01) as well as increased end-systolic and end-diastolic volumes (P < 0.01) after MI. The mean infarct size was 48.8 ± 6.9% of left ventricle. In the isolated working heart coronary flow (time point 20': 6.6 ± 0.9 vs. 13.9 ± 1.6 mL/min, P < 0.01), cardiac output (time point 20': 17.5 ± 2.6 vs. 36.1 ± 4.3 mL/min, P < 0.01) and pump function (80 mmHg: 2.15 ± 0.88 vs. 4.83 ± 0.76, P < 0.05) were significantly attenuated in MI hearts during all measurements. Systolic and diastolic wall stress were significantly elevated in MI animals. CONCLUSION: This two-step approach is reasonable, since data quality increases while animals are not exposed to major additional interventions. Both the working heart and magnetic resonance imaging offer a reliable characterization of the functional changes that go along with the development of post-MI REM. By combining these two techniques, additional information such as wall stress can be evaluated.
RESUMEN
The loss of an extremity is a disastrous injury with tremendous impact on a patient's life. Current mechanical prostheses are technically highly sophisticated, but only partially replace physiologic function and aesthetic appearance. As a biologic alternative, approximately 70 patients have undergone allogeneic hand transplantation to date worldwide. While outcomes are favorable, risks and side effects of transplantation and long-term immunosuppression pose a significant ethical dilemma. An autologous, bio-artificial graft based on native extracellular matrix and patient derived cells could be produced on demand and would not require immunosuppression after transplantation. To create such a graft, we decellularized rat and primate forearms by detergent perfusion and yielded acellular scaffolds with preserved composite architecture. We then repopulated muscle and vasculature with cells of appropriate phenotypes, and matured the composite tissue in a perfusion bioreactor under electrical stimulation in vitro. After confirmation of composite tissue formation, we transplanted the resulting bio-composite grafts to confirm perfusion in vivo.
Asunto(s)
Miembros Artificiales , Órganos Bioartificiales , Matriz Extracelular/química , Músculo Esquelético/crecimiento & desarrollo , Células Madre/citología , Andamios del Tejido , Animales , Diferenciación Celular/fisiología , Sistema Libre de Células , Células Cultivadas , Análisis de Falla de Equipo , Masculino , Músculo Esquelético/citología , Diseño de Prótesis , Ratas , Ratas Sprague-Dawley , Células Madre/fisiología , Ingeniería de Tejidos/instrumentaciónRESUMEN
Bioengineered lungs produced from patient-derived cells may one day provide an alternative to donor lungs for transplantation therapy. Here we report the regeneration of functional pulmonary vasculature by repopulating the vascular compartment of decellularized rat and human lung scaffolds with human cells, including endothelial and perivascular cells derived from induced pluripotent stem cells. We describe improved methods for delivering cells into the lung scaffold and for maturing newly formed endothelium through co-seeding of endothelial and perivascular cells and a two-phase culture protocol. Using these methods we achieved â¼75% endothelial coverage in the rat lung scaffold relative to that of native lung. The regenerated endothelium showed reduced vascular resistance and improved barrier function over the course of in vitro culture and remained patent for 3 days after orthotopic transplantation in rats. Finally, we scaled our approach to the human lung lobe and achieved efficient cell delivery, maintenance of cell viability and establishment of perfusable vascular lumens.