Hypocholesterolemic Efficacy of Secoisolariciresinol Diglucoside and Its Polymer in Rat.

Hypercholesterolemia is a risk factor for cardiovascular disease. Conventional treatment methods include lifestyle changes and pharmaceutical interventions, but recently Health Canada approved a health claim for whole ground flaxseed as an alternative treatment for hypercholesterolemia. The literature suggests flaxseed lignans are responsible for the cholesterol-reducing effects of flaxseed. In this study, 96.1% secoisolariciresinol diglucoside (SDG) and a 50% SDG enriched polymer (SDG polymer) were investigated as treatments for hypercholesterolemia in rats. Wistar female rats were fed a 1% high-cholesterol diet for a one-week acclimatization prior to a 23-day intervention with enriched SDG or SDG polymer. A reduction in body weight normalized liver weight was observed in rats treated with enriched SDG when compared to the controls. Both enriched SDG (96.1%) and SDG polymer reduced serum triacylglycerol (19% and 15%, respectively) and increased high-density lipoprotein cholesterol (15% and 24%, respectively). Histopathologic analyses revealed lipid-lowering effects of either enriched SDG or SDG polymer along with lower steatosis scores and nonalcoholic fatty liver disease activity. Furthermore, the lack of statistical significance between SDG and SDG polymer treatment groups suggests that SDG polymer may be a potential alternative to enriched SDG for hypercholesterolemia with similar efficacy but lower cost.

Oral Pharmacokinetics of Enriched Secoisolariciresinol Diglucoside and Its Polymer in Rats.

Secoisolariciresinol diglucoside (SDG) is the principal lignan of flaxseed and precursor of its aglycone, secoisolariciresinol (SECO), and the mammalian lignans enterolactone (EL) and enterodiol (ED), the putative bioactive forms of oral administration of SDG. SDG is present in the seed hull as an ester-linked polymer. Although extraction and purification of SDG monomer is costly, the use of naturally occurring SDG in polymer form may offer a more economical approach for delivery of this precursor. The extent of SDG release from the polymer and subsequent bioavailability of SDG metabolites are unknown. To understand the relative bioavailability of SDG polymer, this study examined the comparative bioavailability of enriched SDG and SDG polymer in rats after a single oral SDG equivalent dose (40 mg/kg). A validated LC-MS/MS method quantified SDG and its metabolites in rat plasma following serial blood collections. SDG remained undetectable in rat plasma samples. Unconjugated SECO was detected in plasma after 0.25 h. Unconjugated ED was observed after 8 h (3.4 ± 3.3 ng/mL) and 12 h (6.2 ± 3.3 ng/mL) for enriched SDG and SDG polymer, respectively. Total (conjugated and unconjugated) ED and EL resulting from enriched SDG and SDG polymer reached similar maximal concentrations between 11 and 12 h and demonstrated similar total body exposures (AUC values). These data suggest a similar pharmacokinetic profile between the enriched and polymer form of SDG, providing support for the use of SDG polymer as a more economical precursor for SECO, ED, and EL in applications of chronic disease management.

Can hydro-thermo-mechanical treatment by instant controlled pressure-drop (DIC) be used as short time roasting process? Effect of processing parameters on sensory, physical, functional, and color attributes of Egyptian carob powder.

This study deals with the manufacture of a specific cocoa-like powder from Egyptian carob. The crucial unit operation consists of texturing/roasting unseeded carob kibbles, with the aim being to ensure perfect control of the chemical transformations that generate the desired flavor, drying to remove excess moisture, deodorizing to eliminate the undesirable flavor, and texturing to favor the physical/micro-mechanical changes that regulate the microstructure of the end product, in order to obtain an expanded-granule powder that can be used in many food formulations. The effect of saturated steam pressure of 0.30-0.60 MPa (133.5-158.8 °C) and processing time of 40-70 s, on the sensory attributes, physical and functional properties, and color characteristics were evaluated and optimized using response surface methodology (RSM). DIC-texturing/roasting could be used to improve the sensory and color characteristics, increase the expansion ratio and oil holding capacity, and decrease the bulk density of DIC-textured/roasted carob powder. The desired quality of textured/roasted carob powder was obtained at 0.60 MPa (158.8 °C) for 55 s (experimental conditions) with water holding capacity close to those of non-textured/unroasted sample. DIC can be used as a coupled process of texturing and roasting at 0.60 MPa for 68 s as predicted by RSM.

Physicochemical and Sensory Evaluation of Grain-Based Food.

Grain-based food is a staple of the human diet [...].

Canadian policy changes for alcohol-based hand rubs during the COVID-19 pandemic and unintended risks.

The COVID-19 pandemic led to major changes in public policies to address supply chain disruption and escalated the price of consumer disinfectant products. To address market demands on alcohol-based hand rubs and disinfectants, Health Canada implemented major changes to the regulations regarding composition, handling, transportation, and packaging to insure product availability. Furthermore, accelerated licensing of ingredients and packaging did not meet standard medical quality guidelines yet were authorized for manufacturing and packaging of alcohol-based hand rubs and disinfectants. The accountability associated with these policy changes were reactive, including industry self-reporting, consumer reporting, and Health Canada advisories and recalls that were responsive to products after they were available in the market. Nonetheless, Canadian public health policy increased hand sanitizers availability. However, some of the interim policies have raised major public health concerns associated with ethanol quality, packaging, and labeling, and enforcement of regulations. In this paper, we review the changes in the Canadian regulations amid the current pandemic and we evaluate the unintended health risks that might arise from these changes.

Standardization of Aquafaba Production and Application in Vegan Mayonnaise Analogs.

Canning or boiling pulse seeds in water produces a by-product solution, called "aquafaba", that can be used as a plant-based emulsifier. One of the major problems facing the commercialization of aquafaba is inconsistency in quality and functionality. In this study, chickpea aquafaba production and drying methods were optimized to produce standardized aquafaba powder. Aquafaba samples, both freeze-dried and spray-dried, were used to make egg-free, vegan mayonnaise. Mayonnaise and analog physicochemical characteristics, microstructure, and stability were tested and compared to mayonnaise prepared using egg yolk. Chickpeas steeped in water at 4 °C for 16 h, followed by cooking at 75 kPa for 30 min at 116 °C, yielded aquafaba that produced the best emulsion qualities. Both lyophilization and spray drying to dehydrate aquafaba resulted in powders that retained their functionality following rehydration. Mayonnaise analogs made with aquafaba powder remained stable for 28 days of storage at 4 °C, although their droplet size was significantly higher than the reference sample made with egg yolk. These results show that aquafaba production can be standardized for optimal emulsion qualities, and dried aquafaba can mimic egg functions in food emulsions and has the potential to produce a wide range of eggless food products.

Toxicology of alcohol-based hand rubs formulated with technical-grade ethanol.

Alcohol-based hand rubs (ABHRs) formulated with technical-grade ethanol were temporarily permitted in Canada and the U.S beginning April 2020 to meet the current demand due to COVID-19. ABHRs formulated with technical-grade ethanol are low risk for general use. In this review, we discuss the toxicity of common contaminants found in technical-grade ethanol, as well as contaminants that may have been introduced into the products during formulation and packaging of ABHRs. Although primary route of exposure is via dermal absorption and inhalation, there have been reported elevated concerns regarding to ingestion of ABHRs. Overall, the highest risks were associated with methanol (for its toxicity), ethyl acetate (skin defattening), and acetaldehyde (carcinogenic and teratogenic). For these reasons Health Canada and the United States Food and Drug Administration have issued recalls on products containing some of these contaminants. More vigilant policing by regulatory agencies and general product users are required to ensure compliance, safety, and efficacy of these new products, as demand continue to rise during this unprecedented pandemic.

Chickpea Cultivar Selection to Produce Aquafaba with Superior Emulsion Properties.

Aquafaba (AQ), a viscous by-product solution produced during cooking chickpea or other legumes in water, is increasingly being used as an egg replacement due to its ability to form foams and emulsions. The objectives of our work were to select a chickpea cultivar that produces AQ with superior emulsion properties, and to investigate the impact of chickpea seed physicochemical properties and hydration kinetics on the properties of AQ-based emulsions. AQ from a Kabuli type chickpea cultivar (CDC Leader) had the greatest emulsion capacity (1.10 ± 0.04 m2/g) and stability (71.9 ± 0.8%). There were no correlations observed between AQ emulsion properties and chickpea seed proximate compositions. Meanwhile, AQ emulsion properties were negatively correlated with AQ yield and moisture content, indicating that AQ with higher dry-matter content displayed better emulsion properties. In conclusion, the emulsification properties of aquafaba are greatly influenced by the chickpea genotype, and AQ from the CDC Leader chickpea produced the most stable food oil emulsions.

Composition and Properties of Aquafaba: Water Recovered from Commercially Canned Chickpeas.

Chickpea and other pulses are commonly sold as canned products packed in a thick solution or a brine. This solution has recently been shown to produce stable foams and emulsions, and can act as a thickener. Recently interest in this product has been enhanced through the internet where it is proposed that this solution, now called aquafaba by a growing community, can be used a replacement for egg and milk protein. As aquafaba is both new and being developed by an internet based community little is known of its composition or properties. Aquafaba was recovered from 10 commercial canned chickpea products and correlations among aquafaba composition, density, viscosity and foaming properties were investigated. Proton NMR was used to characterize aquafaba composition before and after ultrafiltration through membranes with different molecular weight cut offs (MWCOs of 3, 10, or 50 kDa). A protocol for electrophoresis, and peptide mass fingerprinting is also presented. Those methods provided valuable information regarding components responsible for aquafaba functional properties. This information will allow the development of practices to produce standard commercial aquafaba products and may help consumers select products of superior or consistent utility.