Formulation of Next-Generation Multicompartment Microcapsules by Reversible Electrostatic Attraction.

The combination of several active substances into one carrier is often limited due to solubility, stability and phase-separation issues. These issues have been addressed by an innovative capsule design, in which nanocapsules are assembled on the microcapsule surface by electrostatic forces to form a pH-responsive hierarchical capsule@capsule system. Here, melamine-formaldehyde (MF) microcapsules with a negative surface charge were synthesized and coated with a novel MF-polyethyleneimine (PEI) copolymer to achieve a positive charge of ζ=+28 mV. This novel coating procedure allows the electrostatic assembly of negatively charged poly-l-lactide (PLLA, ζ=-19 mV) and poly-(lactide-co-glycolide) (PLGA, ζ=-56 mV) nanocapsules on the microcapsule surface. Assembly studies at pH 7 gave a partial surface coverage of PLLA nanocapsules and full surface coverage for PLGA nanocapsules. The pH-responsive adsorption and desorption of nanocapsules was shown at pH 7 and pH 3.

Protein corona of nanoparticles: distinct proteins regulate the cellular uptake.

Understanding nanoparticle-protein interactions is a crucial issue in the development of targeted nanomaterial delivery. Besides unraveling the composition of the nanoparticle's protein coronas, distinct proteins thereof could control nanoparticle uptake into specific cell types. Here we differentially analyzed the protein corona composition on four polymeric differently functionalized nanoparticles by label-free quantitative mass spectrometry. Next, we correlated the relative abundance of identified proteins in the corona with enhanced or decreased cellular uptake of nanoparticles into human cancer and bone marrow stem cells to identify key candidates. Finally, we verified these candidate proteins by artificially decorating nanoparticles with individual proteins showing that nanoparticles precoated with the apolipoproteins ApoA4 or ApoC3 significantly decreased the cellular uptake, whereas precoating with ApoH increased the cellular uptake.

Nanoprobing the acidification process during intracellular uptake and trafficking.

Many nanoparticular drug delivery approaches rely on a detailed knowledge of the acidification process during intracellular trafficking of endocytosed nanoparticles (NPs). Therefore we produced a nanoparticular pH sensor composed of the fluorescent pH-sensitive dual wavelength dye carboxy seminaphthorhodafluor-1 (carboxy SNARF-1) coupled to the surface of amino-functionalized polystyrene NPs (SNARF-1-NP). By applying a calibration fit function to confocal laser scanning microscopy (CLSM) images, local pH values were determined. The acidification and ripening process of endo/lysosomal compartments containing nanoparticles was followed over time and was found to progress up to 6h to reach an equilibrium pH distribution (maximum pH5.2 [±0.2]). The SNARF-1-NP localization in endo/lysosomal compartments was confirmed by transmission electron microscopy (TEM) and quantitative co-localization analysis with fluorescent endolysosomal marker Rab-proteins by confocal laser scanning microscopy (CLSM). The herein described nanoparticular pH-sensor is a versatile tool to monitor dynamic pH processes inside the endolysosomal compartments. FROM THE CLINICAL EDITOR: In this interesting article, the authors elegantly designed a nanoparticular pH sensor with fluorescence probe with the capability to measure intracellular and intravesicular pH changes. The application of this method would enable the further understanding of nanoparticle uptake and intracellular physiology.

Cellulose nanofiber/nanocrystal reinforced capsules: a fast and facile approach toward assembly of liquid-core capsules with high mechanical stability.

Liquid-core capsules of high mechanical stability open up for many solid state-like applications where functionality depending on liquid mobility is vital. Herein, a novel concept for fast and facile improvement of the mechanical properties of walls of liquid-core capsules is reported. By imitating nature's own way of enhancing the mechanical properties in liquid-core capsules, the parenchyma plant cells found in fruits and vegetables, a blend of short cellulose nanofibers (<1 µm, NFC) and nanocrystals (CNC) was exploited in the creation of the capsule walls. The NFC/CNC blend was prepared from a new version of the classical wood pulp hydrolysis. The capsule shell consisted of a covalently (by aromatic diisocyanate) cross-linked NFC/CNC structure at the outer capsule wall and an inner layer dominated by aromatic polyurea. The mechanical properties revealed an effective capsule elastic modulus of 4.8 GPa at 17 wt % NFC/CNC loading, about six times higher compared to a neat aromatic polyurea capsule (0.79 GPa) and 3 orders of magnitude higher than previously reported capsules from regenerated cellulose (0.0074 GPa). The outstanding mechanical properties are ascribed to the dense nanofiber structure, present in the outer part of the capsule wall, that is formed by oriented NFC/CNC of high average aspect ratio (L/d ∼ 70) and held together by both covalent (urethane bonds) and physical bonds (hydrogen bonds).

Enzyme responsive hyaluronic acid nanocapsules containing polyhexanide and their exposure to bacteria to prevent infection.

Antibacterial nanodevices could bring coatings of plastic materials and wound dressings a big step forward if the release of the antibacterial agents could be triggered by the presence of the bacteria themselves. Here, we show that novel hyaluronic acid (HA)-based nanocapsules containing the antimicrobial agent polyhexanide are specifically cleaved in the presence of hyaluronidase, a factor of pathogenicity and invasion for bacteria like Staphylococcus aureus and Escherichia coli. This resulted in an efficient killing of the pathogenic bacteria by the antimicrobial agent. The formation of different polymeric nanocapsules was achieved through a polyaddition reaction in inverse miniemulsion. After the synthesis, the nanocapsules were transferred to an aqueous medium and investigated in terms of size, size distribution, functionality, and morphology using dynamic light scattering, zeta potential measurements and scanning electron microscopy. The enzyme triggered release of a model dye and the antimicrobial polyhexanide was monitored using fluorescence and UV spectroscopy. The stability of the nanocapsules in several biological media was tested and the interaction of nanocapsules with human serum protein was studied using isothermal titration calorimetry. The antibacterial effectiveness is demonstrated by determination of the antibacterial activity and determination of the minimal bactericidal concentration (MBC).

In-vivo time course of organ uptake and blood-brain-barrier permeation of poly(L-lactide) and poly(perfluorodecyl acrylate) nanoparticles with different surface properties in unharmed and brain-traumatized rats.

Background: Traumatic brain injury (TBI) has a dramatic impact on mortality and quality of life and the development of effective treatment strategies is of great socio-economic relevance. A growing interest exists in using polymeric nanoparticles (NPs) as carriers across the blood-brain barrier (BBB) for potentially effective drugs in TBI. However, the effect of NP material and type of surfactant on their distribution within organs, the amount of the administrated dose that reaches the brain parenchyma in areas with intact and opened BBB after trauma, and a possible elicited inflammatory response are still to be clarified. Methods: The organ distribution, BBB permeation and eventual inflammatory activation of polysorbate-80 (Tw80) and sodiumdodecylsulfate (SDS) stabilized poly(L-lactide) (PLLA) and poly(perfluorodecyl acrylate) (PFDL) nanoparticles were evaluated in rats after intravenous administration. The NP uptake into the brain was assessed under intact conditions and after controlled cortical impact (CCI). Results: A significantly higher NP uptake at 4 and 24 h after injection was observed in the liver and spleen, followed by the brain and kidney, with minimal concentrations in the lungs and heart for all NPs. A significant increase of NP uptake at 4 and 24 h after CCI was observed within the traumatized hemisphere, especially in the perilesional area, but NPs were still found in areas away from the injury site and the contralateral hemisphere. NPs were internalized in brain capillary endothelial cells, neurons, astrocytes, and microglia. Immunohistochemical staining against GFAP, Iba1, TNFα, and IL1ß demonstrated no glial activation or neuroinflammatory changes. Conclusions: Tw80 and SDS coated biodegradable PLLA and non-biodegradable PFDL NPs reach the brain parenchyma with and without compromised BBB by TBI, even though a high amount of NPs are retained in the liver and spleen. No inflammatory reaction is elicited by these NPs within 24 h after injection. Thus, these NPs could be considered as potentially effective carriers or markers of newly developed drugs with low or even no BBB permeation.

Suppressing unspecific cell uptake for targeted delivery using hydroxyethyl starch nanocapsules.

Synthesizing nanocarriers with stealth properties and delivering a "payload" to the particular organ remains a big challenge but is the prime prerequisite for any in vivo application. As a nontoxic alternative to the modification by poly(ethylene glycol) PEG, we describe the synthesis of cross-linked hydroxyethyl starch (HES, M(w) 200,000 g/mol) nanocapsules with a size range of 170-300 nm, which do not show nonspecific uptake into cells. The specific uptake was shown by coupling a folic acid conjugate as a model targeting agent onto the surface of the nanocapsules, because folic acid has a high affinity to a variety of human carcinoma cell lines which overexpress the folate receptor on the cell surface. The covalent binding of the folic acid conjugate onto HES capsules was confirmed by FTIR and NMR spectroscopy. The coupling efficiency was determined using fluorescence spectroscopy. The specific cellular uptake of the HES nanocapsules after folic acid coupling into the folate-receptor presenting cells was studied by confocal laser scanning microscopy (CLSM) and flow cytometry.

Labeling of mesenchymal stromal cells with iron oxide-poly(L-lactide) nanoparticles for magnetic resonance imaging: uptake, persistence, effects on cellular function and magnetic resonance imaging properties.

BACKGROUND AIMS: Mesenchymal stromal cells (MSC) are the focus of research in regenerative medicine aiming at the regulatory approval of these cells for specific indications. To cope with the regulatory requirements for somatic cell therapy, novel approaches that do not interfere with the natural behavior of the cells are necessary. In this context in vivo magnetic resonance imaging (MRI) of labeled MSC could be an appropriate tool. Cell labeling for MRI with a variety of different iron oxide preparations is frequently published. However, most publications lack a comprehensive assessment of the non-interference of the contrast agent with the functionality of the labeled MSC, which is a prerequisite for the validity of cell-tracking via MRI. METHODS: We studied the effects of iron oxide-poly(l-lactide) nanoparticles in MSC with flow cytometry, transmission electron microscopy (TEM), confocal laser scanning microscopy (CLSM), Prussian blue staining, CyQuant® proliferation testing, colony-forming unit-fibroblast (CFU-F) assays, flow chamber adhesion testing, immunologic tests and differentiation tests. Furthermore iron-labeled MSC were studied by MRI in agarose phantoms and Wistar rats. RESULTS: It could be demonstrated that MSC show rapid uptake of nanoparticles and long-lasting intracellular persistence in the endosomal compartment. Labeling of the MSC with these particles has no influence on viability, differentiation, clonogenicity, proliferation, adhesion, phenotype and immunosuppressive properties. They show excellent MRI properties in agarose phantoms and after subcutaneous implantation in rats over several weeks. CONCLUSIONS: These particles qualify for studying MSC homing and trafficking via MRI.

Uptake of polymeric nanoparticles in a human induced pluripotent stem cell-based blood-brain barrier model: Impact of size, material, and protein corona.

The blood-brain barrier (BBB) maintains the homeostasis of the central nervous system, which is one of the reasons for the treatments of brain disorders being challenging in nature. Nanoparticles (NPs) have been seen as potential drug delivery systems to the brain overcoming the tight barrier of endothelial cells. Using a BBB model system based on human induced pluripotent stem cells (iPSCs), the impact of polymeric nanoparticles has been studied in relation to nanoparticle size, material, and protein corona. PLGA [poly(lactic-co-glycolic acid)] and PLLA [poly(d,l-lactide)] nanoparticles stabilized with Tween® 80 were synthesized (50 and 100 nm). iPSCs were differentiated into human brain microvascular endothelial cells (hBMECs), which express prominent BBB features, and a tight barrier was established with a high transendothelial electrical resistance of up to 4000 Ω cm2. The selective adsorption of proteins on the PLGA and PLLA nanoparticles resulted in a high percentage of apolipoproteins and complement components. In contrast to the prominently used BBB models based on animal or human cell lines, the present study demonstrates that the iPSC-based model is suited to study interactions with nanoparticles in correlation with their material, size, and protein corona composition. Furthermore, asymmetrical flow field-flow fractionation enables the investigation of size and agglomeration state of NPs in biological relevant media. Even though a similar composition of the protein corona has been detected on NP surfaces by mass spectrometry, and even though similar amounts of NP are interacting with hBMECs, 100 nm-sized PLGA NPs do impact the barrier, forming endothelial cells in an undiscovered manner.

Cross-linked starch capsules containing dsDNA prepared in inverse miniemulsion as "nanoreactors" for polymerase chain reaction.

Cross-linked potato starch nanocapsules with encapsulated dsDNA (with a defined number of base pairs, i.e., 286, 476, and 790 bp) were synthesized using the miniemulsion technique. The inverse (water-in-oil) miniemulsion system was applied to create stable aqueous nanodroplets of dissolved starch in cyclohexane as a continuous phase. The amphiphilic block copolymer poly[(ethylene-co-butylene)-b-(ethylene oxide)] was used as a surfactant to stabilize the droplets. After addition of the cross-linker, 2,4-toluene diisocyanate (TDI), the polyaddition reaction took place at the droplet's interface, resulting in the formation of a polymeric cross-linked shell. The influence of starch, surfactant, and the amount of cross-linker on the average size, size distribution, and morphology of the capsules was studied by dynamic light scattering and electron microscopy. FTIR spectroscopy was used to identify the chemical composition of the capsule shell. The permeability of the shell was studied on the fluorescent dye (i.e., sulforhodamine 101) containing capsules using fluorescence spectroscopy. High thermal stability of the cross-linked capsules allows one to perform the polymerase chain reaction inside the core. The encapsulation of dsDNA and the efficiency of the PCR were confirmed by fluorescence spectroscopy after staining with the DNA-selective dye (SYBRGreen).

Specific effects of surface amines on polystyrene nanoparticles in their interactions with mesenchymal stem cells.

We have investigated the uptake of cationic polystyrene nanoparticles by mesenchymal stem cells (MSCs) using confocal fluorescence microscopy and flow cytometry. Two types of nanoparticles of about 100 nm diameter with similar zeta potentials were employed in this study, plain polystyrene (PS) nanoparticles and amino-functionalized polystyrene (NPS) nanoparticles, each carrying about 6000 amino groups on the surface. To assess the relative importance of specific endocytosis mechanisms, uptake was observed in the presence of the drugs dynasore and chlorpromazine. NPS nanoparticles were rapidly internalized and accumulated to a much higher level in MSCs than PS nanoparticles, predominantly via the main clathrin-mediated pathway. PS nanoparticles were internalized mainly via clathrin-independent endocytosis. The pronounced difference in the internalization behavior of PS and NPS nanoparticles points to specific interactions of the amino groups on the nanoparticle surface with the endocytosis machinery of the cells.

Magnetic Imaging of Encapsulated Superparamagnetic Nanoparticles by Data Fusion of Magnetic Force Microscopy and Atomic Force Microscopy Signals for Correction of Topographic Crosstalk.

Encapsulated magnetic nanoparticles are of increasing interest for biomedical applications. However, up to now, it is still not possible to characterize their localized magnetic properties within the capsules. Magnetic Force Microscopy (MFM) has proved to be a suitable technique to image magnetic nanoparticles at ambient conditions revealing information about the spatial distribution and the magnetic properties of the nanoparticles simultaneously. However, MFM measurements on magnetic nanoparticles lead to falsifications of the magnetic MFM signal due to the topographic crosstalk. The origin of the topographic crosstalk in MFM has been proven to be capacitive coupling effects due to distance change between the substrate and tip measuring above the nanoparticle. In this paper, we present data fusion of the topography measurements of Atomic Force Microscopy (AFM) and the phase image of MFM measurements in combination with the theory of capacitive coupling in order to eliminate the topographic crosstalk in the phase image. This method offers a novel approach for the magnetic visualization of encapsulated magnetic nanoparticles.

Continuous-Flow Production of Perfluorocarbon-Loaded Polymeric Nanoparticles: From the Bench to Clinic.

Perfluorocarbon-loaded nanoparticles are powerful theranostic agents, which are used in the therapy of cancer and stroke and as imaging agents for ultrasound and 19F magnetic resonance imaging (MRI). Scaling up the production of perfluorocarbon-loaded nanoparticles is essential for clinical translation. However, it represents a major challenge as perfluorocarbons are hydrophobic and lipophobic. We developed a method for continuous-flow production of perfluorocarbon-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles using a modular microfluidic system, with sufficient yields for clinical use. We combined two slit interdigital micromixers with a sonication flow cell to achieve efficient mixing of three phases: liquid perfluorocarbon, PLGA in organic solvent, and aqueous surfactant solution. The production rate was at least 30 times higher than with the conventional formulation. The characteristics of nanoparticles can be adjusted by changing the flow rates and type of solvent, resulting in a high PFC loading of 20-60 wt % and radii below 200 nm. The nanoparticles are nontoxic, suitable for 19F MRI and ultrasound imaging, and can dissolve oxygen. In vivo 19F MRI with perfluoro-15-crown-5 ether-loaded nanoparticles showed similar biodistribution as nanoparticles made with the conventional method and a fast clearance from the organs. Overall, we developed a continuous, modular method for scaled-up production of perfluorocarbon-loaded nanoparticles that can be potentially adapted for the production of other multiphase systems. Thus, it will facilitate the clinical translation of theranostic agents in the future.

Surface-active monomer as a stabilizer for polyurea nanocapsules synthesized via interfacial polyaddition in inverse miniemulsion.

A surface-active monomer, polyisobutylene-succinimide pentamine (Lubrizol U), was used as a stabilizer for synthesizing polyurea nanocapsules with aqueous core via polyaddition at inverse miniemulsion droplet interface. Because of the presence of amine groups in the Lubrizol molecule, it is covalently incorporated into the polymeric interfacial layer after reaction, resulting in more compact (less permeable) capsule shell. The influence of the stabilizer and the monomer concentration on the shell thickness, colloidal stability, average capsule size, and capsule size polydispersity were examined in detail. Different materials, such as a water-soluble fluorescent dye and aqueous dispersion of magnetite nanoparticles with 10 nm in size, were used as inner phase of the polyurea capsules. The encapsulation efficiency was studied using fluorescein as a marker. As an example for biomedical application, the fluorescein-containing capsules were utilized in cell uptake experiments and visualized using fluorescence microscopy.

Carboxylated superparamagnetic iron oxide particles label cells intracellularly without transfection agents.

Cell labeling by superparamagnetic iron oxide particles (SPIO) has emerged as a potentially powerful tool to monitor trafficking of transplanted cells by magnetic resonance tomography, e.g., in studies for tissue repair. However, intracellular labeling is mostly achieved by transfection agents not approved for clinical use. In this work, the feasibility and efficiency of labeling human mesenchymal stem cells (MSC) and HeLa cells with two commercially available SPIOs (Resovist and Feridex) without transfection agents was evaluated. In both cell types, Resovist without a transfection agent was more efficiently taken up than Feridex. Increasing the concentration of Resovist can yield similar amounts of iron in cells as SPIOs with transfection agents. This offers the opportunity to omit transfection agents from the labeling protocol when Resovist is used. Intracellular localization of the contrast agents is found by light microscopy and confirmed by electron microscopy. Coagulation of the SPIO nanoparticles, which is problematic for the quantification of the intracellular iron content, was observed and analyzed with a fluorescent activated cell sorter. As Resovist consists of a carboxydextran shell in contrast to Feridex which is composed of a dextran shell, we synthesized fluorescent polymeric nanoparticles as model systems with different amounts of carboxyl groups on the surface by the miniemulsion process. A steady increase in uptake of nanoparticles was detected with a higher density of carboxyl groups showing the relevance of charged groups as in the case of Resovist. Aggregation of these polymeric nanoparticles was not found.

Synthesis and optimization of gelatin nanoparticles using the miniemulsion process.

A convenient synthetic route based on the concept of nanoreactors using the versatility of the miniemulsion technique to synthesize glutardialdehyde cross-linked gelatin nanoparticles with tailored properties is reported. It is demonstrated that, independent of the molecular weight distribution of the gelatin used, stable nanoparticles can be produced with a small amount of surfactant. The amount of gelatin and the cross-linking degree in the particle can be well controlled. Different types of gelatin have been used without purification or fractionation. The stability of the dispersion, particle size, and the efficiency of cross-linking have been studied. Such nanoparticles with varying gelatin concentration and cross-linking density have high potential to be used for drug delivery applications, as nanoenvironment or template for synthesizing inorganic materials.

Uptake of functionalized, fluorescent-labeled polymeric particles in different cell lines and stem cells.

Labeling of cells with particles for in-vivo detection is interesting for various biomedical applications. The objective of this study was to evaluate the feasibility and efficiency labeling of cells with polymeric particles without the use of transfection agents. We hypothesized that surface charge would influence cellular uptake. The submicron particles were synthesized by the miniemulsion process. A fluorescent dye which served as reporter was embedded in these particles. The surface charge was varied by adjusting the amount of copolymerized monomer with amino group thus enabling to study the cellular uptake in correlation to the surface charge. Fluorescent-activated cell sorter (FACS) measurements were performed for detecting the uptake of the particles or attachment of particles in mesenchymal stem cells (MSC), and the three cell lines HeLa, Jurkat, and KG1a. These cell lines were chosen as they can serve as models for clinically interesting cellular targets. For these cell lines-with the exception of MSCs-a clear correlation of surface charge and fluorescence intensity could be shown. For an efficient uptake of the submicron particles, no transfection agents were needed. Confocal laser scanning microscopy and transmission electron microscopy (TEM) revealed differences in subcellular localization of the particles. In MSCs and HeLa particles were mostly located inside of cellular compartments resembling endosomes, while in Jurkat and KG1a, nanoparticles were predominantly located in clusters on the cell surface. Scanning electron microscopy showed microvilli to be involved in this process.

Carboxyl- and amino-functionalized polystyrene nanoparticles differentially affect the polarization profile of M1 and M2 macrophage subsets.

Macrophages are key regulators of innate and adaptive immune responses. Exposure to microenvironmental stimuli determines their polarization into proinflammatory M1 and anti-inflammatory M2 macrophages. M1 exhibit high expression of proinflammatory TNF-α and IL-1ß, and M2 promote tissue repair, but likewise support tumor growth and cause immune suppression by expressing IL-10. Thus, the M1/M2 balance critically determines tissue homeostasis. By using carboxyl- (PS-COOH) and amino-functionalized (PS-NH2) polystyrene nanoparticles, the effects of surface decoration on the polarization of human macrophages were investigated. The nanoparticles did not compromise macrophage viability nor did they affect the expression of the M1 markers CD86, NOS2, TNF-α, and IL-1ß. By contrast, in M2, both nanoparticles impaired expression of scavenger receptor CD163 and CD200R, and the release of IL-10. PS-NH2 also inhibited phagocytosis of Escherichia coli by both, M1 and M2. PS-COOH did not impair phagocytosis by M2, but increased protein mass in M1 and M2, TGF-ß1 release by M1, and ATP levels in M2. Thus, nanoparticles skew the M2 macrophage polarization without affecting M1 markers. Given the critical role of the M1 and M2 polarization for the immunological balance in patients with cancer or chronic inflammation, functionalized nanoparticles might serve as tools for reprogramming the M1/M2 polarization.

How morphology influences relaxivity - comparative study of superparamagnetic iron oxide-polymer hybrid nanostructures.

Superparamagnetic iron oxides (SPIOs) are widely used in MRI as T2 contrast agents, and interest is still growing. Here, the T2 relaxivity of three different SPIO-polymer hybrid morphologies, i.e. homogeneously distributed iron oxide within a polymer matrix, Janus-like nanoparticles and polymer nanocapsules containing iron oxides, is studied. Making use of calculations based on theory for agglomerated systems, the obtained T2 values could be predicted for all different morphologies, except for nanocapsules. Nanocapsules, in contrast to full spheres, allow for water exchange between encapsulated water and bulk water, and thus have two contributions to relaxivity. One originates from the capsules acting as a weakly magnetized cluster and the other stems from the individual SPIOs inside the capsule. Therefore, the relaxivities were also computed using an empirical equation found in the literature, which considers water exchange, resulting in a better T2 forecast for the nanocapsules. The presented study is the first example of a comparison between measured and calculated relaxivities of nanocapsules.

Tailoring the stealth properties of biocompatible polysaccharide nanocontainers.

Fundamental development of a biocompatible and degradable nanocarrier platform based on hydroxyethyl starch (HES) is reported. HES is a derivative of starch and possesses both high biocompatibility and improved stability against enzymatic degradation; it is used to prepare nanocapsules via the polyaddition reaction at the interface of water nanodroplets dispersed in an organic miniemulsion. The synthesized hollow nanocapsules can be loaded with hydrophilic guests in its aqueous core, tuned in size, chemically functionalized in various pathways, and show high shelf life stability. The surface of the HES nanocapsules is further functionalized with poly(ethylene glycol) via different chemistries, which substantially enhanced blood half-life time. Importantly, methods for precise and reliable quantification of the degree of functionalization are also introduced, which enable the precise control of the chemistry on the capsules' surface. The stealth properties of these capsules is studied both in-vitro and in-vivo. The functionalized nanocapsules serve as a modular platform for specific cell targeting, as they show no unspecific up-taken by different cell types and show very long circulating time in blood (up to 72 h).