Efficacy and safety of particle embolization in bronchial arteries of hemoptysis patients with shunts.

AIM: This study assesses the safety and efficacy of particle embolization during bronchial artery embolization (BAE) in patients with shunts between bronchial and non-bronchial systemic arteries and the pulmonary artery. METHODS: In this retrospective, single-center study, we analyzed 312 BAE procedures performed from June 2020 to April 2023. The patient cohort had shunts between bronchial and non-bronchial systemic arteries and the pulmonary artery. We meticulously collected and examined comprehensive data, including clinical characteristics, computed tomography (CT) imaging, and embolization procedural details. RESULTS: Vascular shunts were identified in 49 patients. The etiologies of hemoptysis included post-TB sequelae (42.8%), bronchiectasis (26.5%), active TB (12.2%), aspergilloma (8.1%), bacterial pneumonia (4.1%), lung cancer (4.1%), and non-tuberculous mycobacterial infection (2%). The technical success rate of the procedures was 98%, with 149 out of 152 identified vessels successfully embolized. All patients experienced cessation or significant reduction of hemoptysis within 24 hours following the procedure. The clinical success rates were 97.9% at one month, 93.9% at six months, and 89.8% at one year. No shunt-related complications were detected. CONCLUSION: BAE with particle embolization is a safe and effective treatment for hemoptysis, particularly in cases with complex shunts between bronchial and non-bronchial systemic arteries and the pulmonary artery.

Discrepancies between clinical and pathological findings seen at renal biopsy in rheumatological diseases.

OBJECTIVE: Renal biopsy contributes to the diagnosis, follow-up, and treatment of many rheumatic conditions. This study assessed the diagnostic role and safety of renal biopsies in a tertiary rheumatology clinic. METHODS: Renal biopsies performed between June 2020 and December 2022 were screened, and demographic, clinical, histopathological, and safety data were collected from patient records. RESULTS: In this study, 33 males and 38 females were included. Except for 1 patient who received acetylsalicylic acid, antiaggregant, and/or anticoagulant drugs were stopped before the biopsy. Complications included a decrease of hemoglobin in 8 patients (11.3%) and microscopic hematuria in 40 patients (56.3%). Control ultrasonography was performed in 16 patients (22.5%), and a self-limiting hematoma was found in 4 of them (5.6%) without additional complications. While less than 10 glomeruli were obtained in 9 patients (9.9%), diagnosis success was 94.4%. Histopathological data were consistent with one of the pre-biopsy diagnoses in 54 of 67 cases (80.6%) but showed discrepancies in 19.4% (n=13) of patients. A repeat biopsy was performed in 7 patients for re-staging or insufficient biopsy. CONCLUSIONS: Renal biopsy significantly contributes to rheumatology practice, especially in patients with complex clinical and laboratory findings or in whom different treatments can be given according to the presence, severity, and type of renal involvement. Although the possibility of obtaining insufficient tissue and the need for re-staging and repeat biopsy in the follow-up might be expected, complication risk does not seem to be a big concern. Renal biopsy often evidenced discrepancies between pre-biopsy diagnosis and histopathological findings.

Mechanical Analyses of Quadriceps Tendon Graft with Five Different Fixation Techniques on the Femoral Side: an Experimental Study on Sheep Knees.

PURPOSE OF THE STUDY We aimed to evaluate the biomechanical properties of quadriceps tendon graft with a bone plug ending (QTBP) and a quadriceps graft with a tendinous ending(QTT) fixed on the femoral side with different fixation devices. MATERIAL AND METHODS Twenty-five paired 2-year-old calf QTs and 25 paired 2-year-old sheep femurs were used for this study. 90x8 mm central part of the quadriceps tendons with or without a bone plug was harvested. 8×25 mm tunnel was placed in lateral condyles. The QTT was fixed with four different fixation devices, including the adjustable suspensory system (QTT-ASS, group 1), biodegradable interference screws (QTT-BIS, group 2), titanium interference screws (QTT-TIS, group 3), and an adjustable suspensory system + biodegradable interference screws (QTT-(ASS+BIS), group 4); QTBP was fixed with titanium interference screws (QTBP-TIS, group 5). All groups were tested in a servohydraulic materials testing machine. Stiffness(N/mm), slippage of the tendon(mm), and the ultimate tensile load-bearing ability(N) of the groups were tested. The Kruskal-Wallis H test was used with the Monte Carlo simulation technique to compare the nonparametric variables of stiffness, slippage, and ultimate tensile load. Dunn's test was used for the post hoc analyses. RESULTS Group 3 had the stiffest fixation (median 45.09 N/mm). The amount of slippage was highest in group 1(median 6.41mm). Group 1 was the most resistant group against a tensile load during the load-to-failure test(464 N). Fixing the QTT with the ASS and BIS in group 4 increased both stiffness and ultimate tensile load strength. There was no significant difference between the QTBP and QTT fixed with titanium screws. Fixing QTT with titanium screws was significantly superior to fixation with BIS(p < 0.05). CONCLUSIONS This study demonstrates that QTBP fixation with TIS have no advantage over QTT fixation with TIS on the femoral side. Although the QTT group fixed with ASS was the most resistant group against tensile forces during load-to-failure test, amount of slippage was highest for this group as well. Thus, if an ASS is to be used, a strong tension force must be applied prior to tibial side fixation to prevent further slippage of the graft in the tunnel. Key words: anterior cruciate ligament, quadriceps tendon graft, femoral side, fixation, biomechanical properties.

Screening first-degree relatives of patients with idiopathic dilated cardiomyopathy.

BACKGROUND: This study evaluated whether subclinical myocardial dysfunction occurs in first-degree relatives of patients with idiopathic dilated cardiomyopathy (IDCM), using strain echocardiographic imaging, before apparent left ventricular (LV) failure is observed. PATIENTS AND METHODS: The study comprised 77 subjects aged 16-63 years who had first-degree relatives with a previous or new diagnosis of IDCM. LV myocardial deformation parameters of the first-degree relatives with normal LVEF (≥55%) values, as assessed using 2D echocardiography, were evaluated. The findings of the first-degree relatives were compared with an age- and sex-matched control group (n = 86). RESULTS: No difference in terms of age, gender, and body surface area was detected between first-degree relatives and controls. First-degree relatives of IDCM patients had significantly lower LVEF (62.04 ± 5.8% vs. 65.65 ± 6.3%, p < 0.001) and FS values (39.4 ± 6.6 vs. 41.45 ± 5.5, p = 0.03) compared with the controls. Assessment of LV deformation parameters revealed that LV global longitudinal strain (-17.34 ± 2.19% vs. -19.21 ± 2.16%, p < 0.001) and strain rate (0.94 ± 0.14 s-1 vs. 1.03 ± 0.14 s-1, p < 0.001), radial strain (34.47 ± 9.14% vs 42.79 ± 11.91%, p < 0.001) and strain rate (1.6 ± 0.38 s-1 vs. 1.75 ± 0.29 s-1, p = 0.006), circumferential strain (-6.07 ± 2.83% vs. -18.29 ± 3.39%, p < 0.001) and strain rate (1.09 ± 0.24 s-1 vs. 1.2 ± 0.25 s-1, p = 0.004), and torsion (10.07 ± 5.18o/cm vs. 12.42 ± 5.78o/cm, p = 0.009) were significantly reduced in first-degree relatives compared with controls. CONCLUSION: LV deformation parameters are impaired in first-degree relatives of patients with IDCM. Screening of this population using standard 2D echocardiography and strain imaging may provide early detection of those with subclinical myocardial dysfunction.

Electrochemical reductive desorption of alkyl self-assembled monolayers studied in situ by spectroscopic ellipsometry: evidence for formation of a low refractive index region after desorption.

Gold-sulphur bonds holding self-assembled monolayers (SAMs) on their gold substrate can be broken by electrochemical reduction, which typically occurs in an electrode potential range where the electrochemical hydrogen evolution reaction (HER) is thermodynamically possible. This work uses an in situ coupling between cyclic voltammetry and spectroscopic ellipsometry to compare the interfacial structure after desorption of the aliphatic thiols 1-Dodecanethiol (DDT) and 1-Octadecanethiol (ODT), and the ω-hydroxythiol 11-Mercapto-1-undecanol (MUD). For MUD and DDT, the data can only be explained by the presence of a substance with a significantly lower refractive index than the aqueous electrolyte in the interfacial region. This substance is likely to be H2. The hypothesis is put forward here that for MUD and DDT, desorbed molecules stabilise "nanobubbles" of H2. The resulting aggregates form as initial stages of the process of complete disintegration of the SAMs, i.e. the loss of the SAM-forming molecules into solution. On the other hand, desorption and readsorption of ODT are fully reversible - the presence of a layer with low refractive index can neither be excluded nor confirmed in this case. The results indicate that different SAM-stabilities are a consequence of solubility of the thiolates.

Modulation of electrochemical hydrogen evolution rate by araliphatic thiol monolayers on gold.

Electroreductive desorption of a highly ordered self-assembled monolayer (SAM) formed by the araliphatic thiol (4-(4-(4-pyridyl)phenyl)phenyl)methanethiol leads to a concurrent rapid hydrogen evolution reaction (HER). The desorption process and resulting interfacial structure were investigated by voltammetric techniques, in situ spectroscopic ellipsometry, and in situ vibrational sum-frequency-generation (SFG) spectroscopy. Voltammetric experiments on SAM-modified electrodes exhibit extraordinarily high peak currents, which di er between Au(111) and polycrystalline Au substrates. Association of reductive desorption with HER is shown to be the origin of the observed excess cathodic charges. The studied SAM preserves its two-dimensional order near Au surface throughout a fast voltammetric scan even when the vertex potential is set several hundred millivolt beyond the desorption potential. A model is developed for the explanation of the observed rapid HER involving ordering and pre-orientation of water present in the nanometer-sized reaction volume between desorbed SAM and the Au electrode, by the structurally extremely stable monolayer, leading to the observed catalysis of the HER.

Effects of inter-implant distance and implant length on the response to frontal traumatic force of two anterior implants in an atrophic mandible: three-dimensional finite element analysis.

The aim of this three-dimensional finite element analysis study was to examine the biomechanical behaviour of dental implants and the surrounding bone under traumatic frontal force. Models were created of an edentulous atrophic mandible using cone beam computed tomography data from a patient; two titanium alloy implants (Ti-6Al-4V) were virtually inserted into the anterior of the mandible. Six different variations were modelled to represent differences in implant location (lateral incisor vs. canine placement) and implant length (monocortical, bicortical, and long-bicortical). A static force of 10 MPa was applied frontally to the symphysis region of each model, and the maximum equivalent von Mises strain of bone, maximum von Mises stress of implants, and chromatic force distributions in bone and implants were recorded. In general, when compared to lateral incisor placement, canine placement of implants resulted in greater von Mises stress on implants and greater equivalent von Mises strain on bone. The findings of the present study showed the distribution of traumatic force to be affected more by inter-implant distance than by implant length. The insertion of implants in the lateral incisor area was found to be a better solution than canine area placement in terms of frontal plane trauma and fracture risk.

Comparative tear concentrations of topically applied ciprofloxacin, ofloxacin, and norfloxacin in human eyes.

The tear pharmacokinetic profiles of 0.3% ciprofloxacin, 0.3% ofloxacin, and 0.3% norfloxacin ophthalmic solutions after a single drop topically administrations in the eyes of 30 healthy volunteers were evaluated. Tear samples collected at 30, 120, 180, and 240 minutes, were analyzed for drug concentrations by high performance liquid chromatography (HPLC) with fluorometric detection. Topically applied ciprofloxacin, ofloxacin, and norfloxacin achieved the mean tear concentrations (mean +/- SD) of 11.28 +/- 6.98, 6.52 +/- 4.06, and 13.28 +/- 8.78 micrograms/g at 30 min, and then fell to 3.52 +/- 1.30, 4.82 +/- 1.80, and 5.79 +/- 4.80 micrograms/g at 240 min, respectively. Topical norfloxacin achieved mean tear level significantly higher than ofloxacin at 30 min (p = 0.031). There were no statistically significant differences in the mean tear levels of ciprofloxacin versus ofloxacin (at 30, 120, 180, and 240 min), ciprofloxacin versus norfloxacin (at 30, 120, 180, and 240 min) and ofloxacin versus norfloxacin (at 120, 180, and 240 min). However, the mean tear levels, 240 min after dosing ciprofloxacin and norfloxacin, fell to the statistically significant concentrations (p = 0.02 and p = 0.01, respectively). But, it is concluded that concentrations of ciprofloxacin, ofloxacin, and norfloxacin in tears were still significantly greater than the minimum inhibitory concentrations for the most sensitive organisms, 240 min after a single drop application.

Penetration of topically applied ciprofloxacin, norfloxacin and ofloxacin into the aqueous humor of the uninflamed human eye.

This study was undertaken to compare aqueous humor penetration of topical 0.3% ciprofloxacin, 0.3% norfloxacin and 0.3% ofloxacin in 63 patients undergoing cataract surgery. The patients were divided into two groups. Group 1 (long-term treatment) involved 30 patients undergoing cataract extraction who received either 0.3% ciprofloxacin, 0.3% norfloxacin or 0.3% ofloxacin topical drops. Each patient was preoperatively given a single drop per hour six times. At the time of surgery, 0.1 ml aqueous fluid was aspirated from the anterior chamber and immediately stored at -70 degrees C. Topically applied ciprofloxacin, ofloxacin and norfloxacin achieved mean aqueous humor levels of 2.80 +/- 1.07, 2.95 +/- 1.19 and 1.50 +/- 0.48 micrograms/ml respectively. There was no statistically significant difference in intraocular mean aqueous levels of ciprofloxacin versus ofloxacin. Topical ciprofloxacin and ofloxacin achieved mean aqueous humor levels significantly higher than norfloxacin (p < 0.001 and p < 0.0008 respectively). Group 2 (short-term treatment) involved 33 patients undergoing cataract extraction who received 0.3% ciprofloxacin, 0.3% ofloxacin and 0.3% norfloxacin topical drops. These patients were given one drop at 90 minutes and one drop 30 minutes preoperatively. At the time of surgery, 0.1 ml aqueous fluid was aspirated from the anterior chamber and immediately stored at -70 degrees C. Topically applied ciprofloxacin, ofloxacin and norfloxacin achieved mean aqueous humor levels of 1.11 +/- 0.50, 1.50 +/- 0.62 and 1.20 +/- 0.43 micrograms/ml respectively. There was no statistically significant difference in intraocular mean aqueous humor levels of ofloxacin versus norfloxacin and ciprofloxacin versus norfloxacin. Topical ofloxacin achieved a significantly higher mean aqueous humor level than ciprofloxacin (p < 0.03). All levels were above the minimum inhibitory concentrations of ciprofloxacin, ofloxacin and norfloxacin for most of the sensitive organisms.