RESUMEN
The C2H2 separation from CO2 and C2H4 is of great importance yet highly challenging in the petrochemical industry, owing to their similar physical and chemical properties. Herein, the pore nanospace engineering of cage-like mixed-ligand MFOF-1 has been accomplished via contracting the size of the pyridine- and carboxylic acid-functionalized linkers and introducing a fluoride- and sulfate-bridging cobalt cluster, based on a reticular chemistry strategy. Compared with the prototypical MFOF-1, the constructed FJUT-1 with the same topology presents significantly improved C2H2 adsorption capacity, and selective C2H2 separation performance due to the reduced cage cavity size, functionalized pore surface, and appropriate pore volume. The introduction of fluoride- and sulfate-bridging cubane-type tetranuclear cobalt clusters bestows FJUT-1 with exceptional chemical stability under harsh conditions while providing multiple potential C2H2 binding sites, thus rendering the adequate ability for practical C2H2 separation application as confirmed by the dynamic breakthrough experiments under dry and humid conditions. Additionally, the distinct binding mechanism is suggested by theoretical calculations in which the multiple supramolecular interactions involving C-H···O, C-H···F, and other van der Waals forces play a critical role in the selective C2H2 separation.
RESUMEN
The development of external stimuli-controlled payload systems has been sought after with increasing interest toward magnetothermally-triggered drug release (MTDR) carriers due to their non-invasive features. However, current MTDR carriers present several limitations, such as poor heating efficiency caused by the aggregation of iron oxide nanoparticles (IONPs) or the presence of antiferromagnetic phases which affect their efficiency. Herein, a novel MTDR carrier is developed using a controlled encapsulation method that fully fixes and confines IONPs of various sizes within the metal-organic frameworks (MOFs). This novel carrier preserves the MOF's morphology, porosity, and IONP segregation, while enhances heating efficiency through the oxidation of antiferromagnetic phases in IONPs during encapsulation. It also features a magnetothermally-responsive nanobrush that is stimulated by an alternating magnetic field to enable on-demand drug release. The novel carrier shows improved heating, which has potential applications as contrast agents and for combined chemo and magnetic hyperthermia therapy. It holds a great promise for magneto-thermally modulated drug dosing at tumor sites, making it an exciting avenue for cancer treatment.
Asunto(s)
Antineoplásicos , Hipertermia Inducida , Estructuras Metalorgánicas , Portadores de Fármacos , Campos MagnéticosRESUMEN
A new series of benzene-sulfonamide derivatives 3a-i was designed and synthesized via the reaction of N-(pyrimidin-2-yl)cyanamides 1a-i with sulfamethazine sodium salt 2 as dual Src/Abl inhibitors. Spectral data IR, 1H-, 13C- NMR and elemental analyses were used to confirm the structures of all the newly synthesized compounds 3a-i and 4a-i. Crucially, we screened all the synthesized compounds 3a-i against NCI 60 cancer cell lines. Among all, compound 3b was the most potent, with IC50 of 0.018 µM for normoxia, and 0.001 µM for hypoxia, compared to staurosporine against HL-60 leukemia cell line. To verify the selectivity of this derivative, it was assessed against a panel of tyrosine kinase EGFR, VEGFR-2, B-raf, ERK, CK1, p38-MAPK, Src and Abl enzymes. Results revealed that compound 3b can effectively and selectively inhibit Src/Abl with IC500.25 µM and Abl inhibitory activity with IC500.08 µM, respectively, and was found to be more potent on these enzymes than other kinases that showed the following results: EGFR IC500.31 µM, VEGFR-2 IC500.68 µM, B-raf IC500.33 µM, ERK IC501.41 µM, CK1 IC500.29 µM and p38-MAPK IC500.38 µM. Moreover, cell cycle analysis and apoptosis performed to compound 3b against HL-60 suggesting its antiproliferative activity through Src/Abl inhibition. Finally, molecular docking studies and physicochemical properties prediction for compounds 3b, 3c, and 3 h were carried out to investigate their biological activities and clarify their bioavailability.
Asunto(s)
Antineoplásicos , Proliferación Celular , Relación Dosis-Respuesta a Droga , Diseño de Fármacos , Ensayos de Selección de Medicamentos Antitumorales , Inhibidores de Proteínas Quinasas , Proteínas Proto-Oncogénicas c-abl , Familia-src Quinasas , Humanos , Antineoplásicos/farmacología , Antineoplásicos/síntesis química , Antineoplásicos/química , Apoptosis/efectos de los fármacos , Proliferación Celular/efectos de los fármacos , Guanidina/farmacología , Guanidina/química , Guanidina/síntesis química , Guanidina/análogos & derivados , Células HL-60 , Leucemia/tratamiento farmacológico , Leucemia/patología , Simulación del Acoplamiento Molecular , Estructura Molecular , Inhibidores de Proteínas Quinasas/farmacología , Inhibidores de Proteínas Quinasas/síntesis química , Inhibidores de Proteínas Quinasas/química , Proteínas Proto-Oncogénicas c-abl/antagonistas & inhibidores , Proteínas Proto-Oncogénicas c-abl/metabolismo , Familia-src Quinasas/antagonistas & inhibidores , Familia-src Quinasas/metabolismo , Relación Estructura-Actividad , Cianamida/síntesis química , Cianamida/química , Cianamida/farmacologíaRESUMEN
Hydrogenated nitrogen heterocyclic compounds play a critical role in the pharmaceutical, polymer, and agrochemical industries. Recent studies on partial hydrogenation of nitrogen heterocyclic compounds have focused on costly and toxic precious metal catalysts. As an important class of main-group catalysts, frustrated Lewis pairs (FLPs) have been widely applied in catalytic hydrogenation reactions. In principle, the combination of FLPs and metal-organic framework (MOF) is anticipated to efficiently enhance the recyclability performance of FLPs; however, the previously studied MOF-FLPs showed low reactivity in the hydrogenation of N-heterocycles compounds. Herein, we offer a novel P/B type MOF-FLP catalyst that was achieved via a solvent-assisted linker incorporation approach to boost catalytic hydrogenation reactions. Using hydrogen gas under moderate pressure, the proposed P/B type MOF-FLP can serve as a highly efficient heterogeneous catalyst for selective hydrogenation of quinoline and indole to tetrahydroquinoline and indoline-type drug compounds in high yield and excellent recyclability.
RESUMEN
A facile two-step hydrothermal method was successfully used to prepare a photocatalyst Bi2WO6/WS2 heterojunction for methyl blue (MB) photodegradation. Fabricated photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray analysis (EDX), and X-ray photoelectron spectroscopy (XPS). Band gap measurements were carried out by diffuse reflectance spectroscopy (DRS). Results indicated that the prepared heterostructure photocatalyst has increased visible light absorption. Photocatalytic performance was evaluated under sunlight irradiation for methylene blue (MB) degradation as a model dye. Variations in pH (4-10), amount of catalyst (0.025-0.1 g/L), and initial MB concentrations (5-20 ppm) were carried out, whereas all prepared catalysts were used to conduct the tests with a visible spectrophotometer. Degradation activity improved with the pH increase; the optimum pH was approximately 8. Catalyst concentration is directly related to degradation efficiency and reached 93.56% with 0.075 g of the catalyst. Among tested catalysts, 0.01 Bi2WO6/WS2 has exhibited the highest activity and a degradation efficiency of 99.0% in 40 min (min) for MB. MB photodegradation follows pseudo-first-order kinetics, and obtained values of kapp were 0.0482 min-1, 0.0337 min-1, 0.0205 min-1, and 0.0087 min-1 for initial concentrations of 5 ppm, 10 ppm, 15 ppm, and 20 ppm, respectively. The catalyst was reused for six cycles with a negligible decrease in the degradation activity. Heterostructure 0.01 Bi2WO6/WS2 has exhibited a photocurrent density of 16 µA cm-2, significantly higher than 2.0 and 4.5 µA cm-2 for the pristine WS2 and Bi2WO6, respectively. The findings from these investigations may serve as a crucial stepping stone towards the remediation of polluted water facilitated by implementing such highly efficient photocatalysts.
Asunto(s)
Azul de Metileno , Luz Solar , Azul de Metileno/química , Fotólisis , Luz , CatálisisRESUMEN
The rapid depletion of fossil fuels and environmental pollution has motivated scientists to cultivate renewable and green energy sources. The hydrogen economy is an emerging replacement for fossil fuels, and photocatalytic water splitting is a suitable strategy to produce clean hydrogen fuel. Herein, the photocatalyst (PdO.TiO2) is introduced as an accelerated photoelectrochemical oxygen evolution reaction (OER). The catalyst showed significant improvement in the current density magnitude from 0.89 (dark) to 4.27 mA/cm2 (light) during OER at 0.5 V applied potential. The as-synthesized material exhibits a Tafel slope of 170 mVdec-1 and efficiency of 0.25% at 0.93 V. The overall outcomes associated with the photocatalytic activity of PdO.TiO2 demonstrated that the catalyst is highly efficient, thereby encouraging researchers to explore more related catalysts for promoting facile OER.
RESUMEN
To cope with environmental pollution caused by toxic emissions into water streams, high-performance photocatalysts based on ZnO semiconductor materials are urgently needed. In this study, ZnO nanostructures are synthesized using leafy spinach extract using a biogenic approach. By using phytochemicals contained in spinach, ZnO nanorods are transformed into large clusters assembled with nanosheets with visible porous structures. Through X-ray diffraction, it has been demonstrated that leafy spinach extract prepared with ZnO is hexagonal in structure. Surface properties of ZnO were altered by using 10 mL, 20 mL, 30 mL, and 40 mL quantities of leafy spinach extract. The size of ZnO crystallites is typically 14 nanometers. In the presence of sunlight, ZnO nanostructures mineralized methylene blue. Studies investigated photocatalyst doses, dye concentrations, pH effects on dye solutions, and scavengers. The ZnO nanostructures prepared with 40 mL of leafy spinach extract outperformed the degradation efficiency of 99.9% for the MB since hydroxyl radicals were primarily responsible for degradation. During degradation, first-order kinetics were observed. Leafy spinach extract could be used to develop novel photocatalysts for the production of solar hydrogen and environmental hydrogen.
Asunto(s)
Luz Solar , Óxido de Zinc , Fotólisis , Óxido de Zinc/química , Azul de Metileno/química , Spinacia oleracea , IluminaciónRESUMEN
Asymmetric hydrogenation, a seminal strategy for the synthesis of chiral molecules, remains largely unmet in terms of activation by non-metal sites of heterogeneous catalysts. Herein, as demonstrated by combined computational and experimental studies, we present a general strategy for integrating rationally designed molecular chiral frustrated Lewis pair (CFLP) with porous metal-organic framework (MOF) to construct the catalyst CFLP@MOF that can efficiently promote the asymmetric hydrogenation in a heterogeneous manner, which for the first time extends the concept of chiral frustrated Lewis pair from homogeneous system to heterogeneous catalysis. Significantly, the developed CFLP@MOF, inherits the merits of both homogeneous and heterogeneous catalysts, with high activity/enantio-selectivity and excellent recyclability/regenerability. Our work not only advances CFLP@MOF as a new platform for heterogeneous asymmetric hydrogenation, but also opens a new avenue for the design and preparation of advanced catalysts for asymmetric catalysis.
RESUMEN
Developing adsorptive separation processes based on C2 H6 -selective sorbents to replace energy-intensive cryogenic distillation is a promising alternative for C2 H4 purification from C2 H4 /C2 H6 mixtures, which however remains challenging. During our studies on two isostructural metal-organic frameworks (Ni-MOF 1 and Ni-MOF 2), we found that Ni-MOF 2 exhibited significantly higher performance for C2 H6 /C2 H4 separation than Ni-MOF-1, as clearly established by gas sorption isotherms and breakthrough experiments. Density-Functional Theory (DFT) studies showed that the unblocked unique aromatic pore surfaces within Ni-MOF 2 induce more and stronger C-Hâ â â π with C2 H6 over C2 H4 while the suitable pore spaces enforce its high C2 H6 uptake capacity, featuring Ni-MOF 2 as one of the best porous materials for this very important gas separation. It generates 12â L kg-1 of polymer-grade C2 H4 product from equimolar C2 H6 /C2 H4 mixtures at ambient conditions.
RESUMEN
One striking feature of enzyme is its controllable ability to trap substrates via synergistic or cooperative binding in the enzymatic pocket, which renders the shape-selectivity of product by the confined spatial environment. The success of shape-selective catalysis relies on the ability of enzyme to tune the thermodynamics and kinetics for chemical reactions. In emulation of enzyme's ability, we showcase herein a targeting strategy with the substrate being anchored on the internal pore wall of metal-organic frameworks (MOFs), taking full advantage of the sterically kinetic control to achieve shape-selectivity for the reactions. For this purpose, a series of binding site-accessible metal metalloporphyrin-frameworks (MMPFs) have been investigated to shed light on the nature of enzyme-mimic catalysis. They exhibit a different density of binding sites that are well arranged into the nanospace with corresponding distances of opposite binding sites. Such a structural specificity results in a facile switch in selectivity from an exclusive formation of the thermodynamically stable product to the kinetic product. Thus, the proposed targeting strategy, based on the combination of porous materials and binding events, paves a new way to develop highly efficient heterogeneous catalysts for shifting selectivity.
Asunto(s)
Metaloporfirinas , Metaloporfirinas/química , Espacios Confinados , Cinética , Sitios de Unión , CatálisisRESUMEN
Strong demand for renewable energy resources and clean environments have inspired scientists and researchers across the globe to carry out research activities on energy provision, conversion, and storage devices. In this context, development of outperform, stable, and durable electrocatalysts has been identified as one of the major objectives for oxygen evolution reaction (OER). Herein, we offer facile approach for the deposition of few palladium oxide (PdO) nanoparticles on the cobalt-nickel bi-metallic sulphide (CoNi2S4) microstructures represented as PdO@ CoNi2S4using ultraviolet light (UV) reduction method. The morphology, crystalline structure, and chemical composition of the as-prepared PdO@ CoNi2S4composite were probed through scanning electron microscopy, powder x-ray diffraction, high resolution transmission electron microscopy, energy dispersive spectroscopy and x-ray photoelectron spectroscopy techniques. The combined physical characterization results revealed that ultraviolet light (UV) light promoted the facile deposition of PdO nanoparticles of 10 nm size onto the CoNi2S4and the fabricated PdO@ CoNi2S4composite has a remarkable activity towards OER in alkaline media. Significantly, it exhibited a low onset potential of 1.41 V versus reversible hydrogen electrode (RHE) and a low overpotential of 230 mV at 10 mA cm-2. Additionally, the fabricated PdO@ CoNi2S4composite has a marked stability of 45 h. Electrochemical impedance spectroscopy has shown that the PdO@CoNi2S4composite has a low charge transfer resistance of 86.3 Ohms, which favours the OER kinetics. The PdO@ CoNi2S4composite provided the multiple number of active sites, which favoured the enhanced OER activity. Taken together, this new class of material could be utilized in energy conversion and storage as well as sensing applications.
RESUMEN
In this study, we have investigated the role of natural dead sea sponge (DSS, Porifera) as a three-dimensional (3D) porous host substrate for the immobilization of nanostructured ZnO material towards the development of ZnO based floating photocatalysts for efficient removal of methylene blue (MB) dye under the illumination of sunlight. After photodegradation, the treated water after dye degradation contains several pathogens, different disinfectants or chemical reagents that are essentially used. This is not the case for DSS as it can naturally kill any pathogens during the wastewater treatment process. To explore these functions, ZnO nanosheets were incorporated onto DSS via hydrothermal protocol and the as prepared ZnO/DSS hybrid material exhibited approximately â¼100% degradation efficiency for the removal of MB. Importantly, the degradation kinetics associated with the fabricated ZnO/DSS was remarkably accelerated as evidenced by the high values of degradation reaction rate constants (3.35 × 10-2min-1). The outperformance of ZnO/DSS could be attributed to the adsorption caused by its 3D porous structure together with the high rapid oxidation of MB. Furthermore, the high charge separation of electron-hole pairs, natural porosity, and abundant catalytic sites offered by the hybrid ZnO/DSS floating photocatalyst have enabled quantitative (â¼100%) degradation efficiency for MB. Finally, the excellent reusability results confirm the feasibility of using natural ZnO/DSS-based photocatalyst for practical solution of wastewater treatment and other environmental problems.
Asunto(s)
Óxido de Zinc , Óxido de Zinc/química , Desinfección , Catálisis , Fotólisis , Azul de Metileno/químicaRESUMEN
The present study demonstrates the crucial role of agave americana extract in enhancing the optical properties of zinc oxide (ZnO) through thermal treatment method. Various analytical and surface science techniques have been used to identify the morphology, crystalline structure, chemical composition, and optical properties, including scanning electron microscopy, x-ray diffraction, high resolution transmission electron microscopy (HRTEM), x-ray spectroscopy (EDS) and UV-visible spectroscopy techniques. The physical studies revealed the transformation of ZnO nanorods into nanosheets upon addition of an optimized amount of agave americana extract, which induced large amount of amorphous carbon deposited onto ZnO nanostructures as confirmed by HRTEM analysis. The use of increasing amount of americana extract has significantly reduced the average crystallite size of ZnO nanostructures. The resultant hybrid system of C@ZnO has produced a significant effect on the ultraviolet light-assisted photodegradation of malachite green (MG) dye. The photocatalyst dose was fixed at 10 mg for each study whereas the amount of agave americana extract and MG dye concentration are varied. The functionality of hybrid system was greatly enhanced when the amount of agave americana extract increased while dye concentration kept at lower level. Ultimately, almost 100% degradation efficiency was achieved via the prepared hybrid material, revealing combined contribution from synergy, stabilization of ZnO due to excess of carbon together with the high charge separation rate. The obtained results suggest that the driving role of agave americana extract for surface modification of photocatalyst can be considered for other nanostructured photocatalysts.
Asunto(s)
Agave , Nanocompuestos , Óxido de Zinc , Carbono , Catálisis , Fotólisis , Extractos Vegetales/química , Colorantes de Rosanilina , Óxido de Zinc/químicaRESUMEN
Uncontrolled inflammation predisposes to pleiotropic effects leading to cancer development thanks to promoting all stages of tumorigenesis. Therefore, cancer-associated inflammation has been delegated as the seventh hallmark of cancer. Thus, raging the war against both inflammation and cancer via the innovation of bioactive agents with dual anti-inflammatory and anticancer activities is a necessity. Herein, a novel series of pyrazole-chalcone analogs of Lonazolac (7a-g and 8a-g) have been synthesized and investigated for their in vitro anticancer activity against four cancer cell lines using the MTT assay method. Among all, hybrid 8g was the most potent against three cancer cell lines, HeLa, HCT-116, and RPMI-822 with IC50 values of 2.41, 2.41, and 3.34 µM, respectively. In contrast, hybrid 8g showed moderate inhibitory activity against MCF-7 with IC50 28.93 µM and with a selectivity profile against MCF-10A (non-cancer cells). Mechanistically, hybrid 8g was the most potent inhibitor against tubulin polymerization (IC50 = 4.77 µM), suggesting tubulin as a molecular target and explaining the observed cytotoxicity of hybrid 8g. This was mirrored by the detected potent pre-G1 apoptosis induction and G2/M cell cycle arrest. Moreover, hybrid8gexhibited selectivity against COX-2 (IC50 = 5.13 µM) more than COX-1 (IC50 = 33.46 µM), indicating that 8g may have lower cardiovascular side effects, but is still not potent as celecoxib (COX-2 IC50 = 0.204 µM, COX-1 = 35.8 µM). Notably, hybrid 8g showed promising inhibitory activity towards 5-LOX (IC50 = 5.88 µM). Finally, the anti-inflammatory activity of hybrid8 g was confirmed by high iNOS and PGE2 inhibitory activities in LPS-stimulated RAW cells with IC50 values of4.93 µM and 10.98 µM, respectively, that accompanied by showingthe most potent inhibition of NO release (70.61 % inhibition rate). Molecular docking studies of hybrid 8g confirmed good correlations with the executed biological results. Furthermore, hybrid 8g had good drug-likeness and suitable physicochemical properties. Taken together, the combined results suggested hybrid8gas a promising orally administered candidate in the journey of repurposing NSAIDs for cancer chemopreventionand treatment.
Asunto(s)
Antineoplásicos , Chalcona , Chalconas , Humanos , Simulación del Acoplamiento Molecular , Moduladores de Tubulina/farmacología , Chalcona/farmacología , Chalconas/farmacología , Tubulina (Proteína)/metabolismo , Ciclooxigenasa 2/metabolismo , Relación Estructura-Actividad , Pirazoles/farmacología , Pirazoles/química , Antiinflamatorios/farmacología , Inflamación , Antineoplásicos/química , Estructura Molecular , Ensayos de Selección de Medicamentos Antitumorales , Proliferación Celular , Línea Celular TumoralRESUMEN
In this study, chloride (Cl−) ions were successfully doped into ZnO nanostructures by the solvothermal method. The effect of various Cl− concentrations on the photocatalytic activity of ZnO towards the photodegradation of methylene blue (MB) under the illumination of ultraviolet light was studied. The as-prepared Cl−-doped ZnO nanostructures were analyzed in terms of morphology, structure, composition and optical properties. XRD data revealed an average crystallite size of 23 nm, and the XRD patterns were assigned to the wurtzite structure of ZnO even after doping with Cl−. Importantly, the optical band gap of various Cl ion-doped ZnO nanostructures was successively reduced from 3.42 to 3.16 eV. The photodegradation efficiency of various Cl− ion-doped ZnO nanostructures was studied for MB in aqueous solution, and the relative performance of each Cl ion-doped ZnO sample was as follows: 20% Cl−-doped ZnO > 15% Cl−-doped ZnO > 10% Cl−-doped ZnO > 5% Cl−-doped ZnO > pristine ZnO. Furthermore, the correlation of the pH of the MB solution and each Cl ion dopant concentration was also investigated. The combined results of varying dopant levels and the effect of the pH of the MB solution on the photodegradation process verified the crucial role of Cl− ions in activating the degradation kinetics of MB. Therefore, these newly developed photocatalysts could be considered as alternative materials for practical applications such as wastewater treatment.
Asunto(s)
Nanoestructuras , Óxido de Zinc , Óxido de Zinc/química , Azul de Metileno , Cloruros , Rayos UltravioletaRESUMEN
Titanium metal-organic frameworks (Ti-MOFs), as an appealing type of artificial photocatalyst, have shown great potential in the field of solar energy conversion due to their well-studied photoredox activity (similar to TiO2 ) and good optical responsiveness of linkers, which serve as the antenna to absorb visible-light. Although much effort has been dedicated to developing Ti-MOFs with high photocatalytic activity, their solar energy conversion performances are still poor. Herein, we have implemented a covalent-integration strategy to construct a series of multivariate Ti-MOF/COF hybrid materials PdTCPPâPCN-415(NH2 )/TpPa (composites 1, 2, and 3), featuring excellent visible-light utilization, a suitable band gap, and high surface area for photocatalytic H2 production. Notably, the resulting composites demonstrated remarkably enhanced visible-light-driven photocatalytic H2 evolution performance, especially for the composite 2 with a maximum H2 evolution rate of 13.98â mmol g-1 h-1 (turnover frequency (TOF)=227â h-1 ), which is much higher than that of PdTCPPâPCN-415(NH2 ) (0.21â mmol g-1 h-1 ) and TpPa (6.51â mmol g-1 h-1 ). Our work thereby suggests a new approach to highly efficient photocatalysts for H2 evolution and beyond.
RESUMEN
Exponential growth in the field of covalent-organic frameworks (COFs) is emanating from the direct correlation between designing principles and desired properties. The comparison of catalytic activity between single-pore and dual-pore COFs is of importance to establish structure-function relationship. Herein, the synthesis of imine-linked dual-pore [(BPyDC)]x % -ETTA COFs (x = 0%, 25%, 50%, 75%, 100%) with controllable bipyridine content is fulfilled by three-component condensation of 4,4',4â³,4'â³-(ethene-1,1,2,2-tetrayl)tetraaniline (ETTA), 4,4'-biphenyldialdehyde, and 2,2'-bipyridyl-5,5'-dialdehyde in different stoichiometric ratio. The strong coordination of bipyridine moieties of [(BPyDC)]x % -ETTA COFs with palladium imparts efficient catalytic active sites for selective functionalization of sp2 CH bond to CX (X = Br, Cl) or CO bonds in good yield. To broaden the scope of regioselective CH functionalization, a wide range of electronically and sterically substituted substrates under optimized catalytic condition are investigated. A comparison of the catalytic activity of palladium decorated dual-pore frameworks with single-pore imine-linked Pd(II)â@âPy-2,2'-BPyDC frameworkâ is undertaken. The finding of this work provides a sporadic example of chelation-assisted CH functionalization and disclosed an in-depth comparison of the relationship between superior catalytic activity and core properties of rationally designed imine linked frameworks.
RESUMEN
Rhenium is one of the most valuable elements found in nature, and its capture and recycle are highly desirable for resource recovery. However, the effective and efficient collection of this material from industrial waste remains quite challenging. Herein, a tetraphenylmethane-based cationic polymeric network (CPN-tpm) nanotrap is designed, synthesized, and evaluated for ReO4- recovery. 3D building units are used to construct imidazolium salt-based polymers with positive charges, which yields a record maximum uptake capacity of 1133 mg g-1 for ReO4- collection as well as fast kinetics ReO4- uptake. The sorption equilibrium is reached within 20 min and a kd value of 8.5 × 105 mL g-1 is obtained. The sorption capacity of CPN-tpm remains stable over a wide range of pH values and the removal efficiency exceeds 60% for pH levels below 2. Moreover, CPN-tpm exhibits good recyclability for at least five cycles of the sorption-desorption process. This work provides a new route for constructing a kind of new high-performance polymeric material for rhenium recovery and rhenium-contained industrial wastewater treatment.
Asunto(s)
Renio , Aniones , Polímeros , Aguas ResidualesRESUMEN
In this work, by combining the superiority of polyoxometalates (POMs) and catalytic single-metal site Co of metalloporphyrin, a series of mixed-valence POM-based metal-organic frameworks (MOFs) composites is synthesized by a post-modification method. The electron-transfer property of POM@PCN-222(Co) composite is significantly enhanced owing to the directional electron-transfer from POM to single-metal site Co in PCN-222(Co). In particular, H-POM@PCN-222(Co) gives a high Faradaic efficiency of 96.2% for electroreduction of CO2 into CO and good stability over 10 h. DFT calculations confirm that the directional electron transfer, which accelerates the multi-electron transfer from the electrode to active single-metal site Co, enriches the electron density of the Co center, and ultimately reduces the energy of the rate-determining step, thus increasing the catalytic activity of CO2 reduction reaction (CO2 RR). This work therefore suggests some new insight for the design of efficient electrocatalysts for CO2 RR.
RESUMEN
A new bidentate Schiff base ligand (ATBS [4-bromo-2-(thiazole-2-yliminomethyl)phenol]) was synthesized via the condensation reaction of 2-aminothiazole with 5-bromosalicylaldehyde in ethanol. The reaction of ATBS with transition metal salts of Cu(II), Co(II), Ni(II), and Mn(II) afforded the corresponding ATBS-M complexes. Results from physicochemical and spectral analyses, such as elemental analysis, infrared, UV-Vis spectroscopy, magnetic susceptibility, and molar conductance, revealed a nonelectrolytic nature with octahedral (Oh ) geometry and a metal/ligand ratio of 1:2 for Cu(II), Co(II), and Ni(II), but 1:1 for the Mn(II) complex. The density functional theory (DFT) calculations are correlated very well with the proposed structure and molecular geometry of the complexes as [M(ATBS)2 ] (M = Cu, Co, and Ni) and [Mn(ATBS)(H2 O)2 ]. Significantly, the prepared compounds showed strong inhibition activity for a wide spectrum of bacteria (Escherichia coli, Bacillus subtilis, and Staphylococcus aureus) and fungi (Candida albicans, Aspergillus flavus, and Trichophyton rubrum), with the ATBS-Ni complex being the most promising antibiotic agent. Molecular docking studies of the binding interaction between the title complexes with the bacterial protein receptor CYP51 revealed clear insights about the inhibition nature against the studied microorganisms, with the following order: ATBS-Cu > ATBS-Mn > ATBS-Ni > ATBS-Co for complex stability. Moreover, the cytotoxicity measurements of all prepared metal complexes against the colon carcinoma (HCT-116) and hepatocellular carcinoma (Hep-G2) cell lines showed exceptional anticancer efficacy of the complexes as compared with the free ATBS Schiff base ligand. Significantly, the results attested that ATBS-Cu is the most effective complex against HCT-116 cells, whereas ATBS-Mn has the highest cytotoxic efficiency against Hep-G2 cells. Furthermore, electronic spectra, viscosity measurements, and gel electrophoresis techniques were employed to probe the interaction of all prepared ATBS-metal complexes with calf thymus (CT)-DNA. Results confirmed that all complexes are strongly bound to CT-DNA via intercalation mode, with the ATBS-Co complex having the highest binding ability.