Enhanced cellular responses of human bone marrow stromal cells cultured on pretreated surface with allogenic platelet-rich plasma.

The principal objective of this study was to evaluate the effects of surface pretreatment with platelet-rich plasma (PRP) on the cellular functions of human bone marrow stromal cells (hBMSCs). The surfaces of tissue culture plates (TCPs) were pretreated by adding PRP followed by centrifugation to bring platelets closer to the surface, followed by incubation for 60 min at 37°C. Then, hBMSCs were seeded onto TCP and TCP pretreated with PRP (TCP-PRP), followed by culture in osteogenic medium. Cell attachment, proliferation, and osteogenic differentiation were evaluated. Field emission scanning electron microscope (FE-SEM; JSM-7401F, JEOL Ltd., Japan) observations were conducted. The attachment of hBMSCs was significantly lower on TCP-PRP than on TCP. However, when the cell numbers were normalized with those observed on day 1 of culture, cellular proliferation on 5 days was significantly higher on TCP-PRP. Alkaline phosphatase activity, an index of early phase of osteoblastic differentiation, was significantly higher on TCP-PRP on day 14. Calcium deposition amount, an index of terminal osteoblastic differentiation, was also significantly higher on TCP-PRP on days 14 and 21. The results of von Kossa staining confirmed that, on day 21, the area of mineralized nodules was significantly larger on TCP-PRP. FE-SEM observation demonstrated that activated platelets and fibrin network covered the surface after PRP treatment. An increase in the number of hBMSCs and their cellular products was evident on the FE-SEM observation, and the fibrin network remained on day 21. Our results demonstrate that a PRP-treated surface enhanced early proliferation and late osteogenic differentiation of hBMSCs.

Platelet-Rich Plasma Pretreatment on Grit-Blasted Titanium Alloy for Enhanced Osteogenic Differentiation of Human Adipose-Derived Stem Cells.

BACKGROUND: Adequate bone formation around titanium alloy implants is integral to successful implantation surgery. Stem cell-coated implants may accelerate peri-implant bone formation. This study investigates the effect of platelet-rich plasma (PRP) pretreatment on a titanium-alloy surface in terms of proliferation and osteogenic differentiation of human adipose-derived stem cells (hADSCs). METHODS: Allogenic leukocyte-depleted PRP was obtained from blood supernatants. The hADSCs were isolated from thigh subcutaneous fat tissue. Grit-blasted titanium plugs were used in two different groups. In one group, 200 µL of PRP was added to the grit-blasted titanium plugs. The hADSCs were seeded in two groups: grit-blasted titanium plugs with or without PRP. The number of hADSCs was measured after 4 hours, 3 days, and 7 days of culture using Cell Counting Kit-8. Osteogenesis of hADSCs was measured by using an alkaline phosphatase activity assay on days 7 and 14, and a calcium assay on days 14 and 21. Osteogenic gene expression was measured by using reverse transcription polymerase chain reaction analysis of alkaline phosphatase, osteocalcin, and type I collagen mRNA. The microscopic morphology of grit-blasted titanium plugs with or without PRP was examined with a field-emission scanning electron microscope using a JSM-7401F apparatus on days 1 and 7. RESULTS: Proliferation and osteogenic differentiation of hADSCs were found to be significantly higher on the grit-blasted titanium alloy preprocessed with PRP than the same alloy without pretreatment. Furthermore, a structural fibrillar mesh developed compactly on the grit-blasted titanium alloy with the PRP pretreatment. CONCLUSIONS: Our results demonstrate that a hADSC-based approach can be used for tissue-engineered peri-implant bone formation and that PRP pretreatment on the grit-blasted titanium alloy can improve proliferation and osteogenic differentiation of hADSCs.

Simple Solvent Engineering for High-Mobility and Thermally Robust Conjugated Polymer Nanowire Field-Effect Transistors.

Electron donor (D)-acceptor (A)-type conjugated polymers (CPs) have emerged as promising semiconductor candidates for organic field-effect transistors. Despite their high charge carrier mobilities, optimization of electrical properties of D-A-type CPs generally suffers from complicated post-deposition treatments such as high-temperature thermal annealing or solvent-vapor annealing. In this work, we report a high-mobility diketopyrrolopyrrole-based D-A-type CP nanowires, self-assembled by a simple but very effective solvent engineering method that requires no additional processes after film deposition. In situ grown uniform nanowires at room temperature were shown to possess distinct edge-on chain orientation that is beneficial for lateral charge transport between source and drain electrodes in FETs. FETs based on the polymer nanowire networks exhibit impressive hole mobility of up to 4.0 cm2 V-1 s-1. Moreover, nanowire FETs showed excellent operational stability in high temperature up to 200 °C because of the strong interchain interaction and alignment.

Meniscal repair in vivo using human chondrocyte-seeded PLGA mesh scaffold pretreated with platelet-rich plasma.

The objective of this study was to test the hypothesis that platelet-rich plasma (PRP) pretreatment on a poly-lactic-co-glycolic acid (PLGA) mesh scaffold enhances the healing capacity of the meniscus with human chondrocyte-seeded scaffolds in vivo, even when the seeded number of cells was reduced from 10 million to one million. A flexible PLGA mesh scaffold was pretreated with PRP using a centrifugal technique. One million human articular chondrocytes were seeded onto the scaffold by dynamic oscillation. After 7 days, scaffolds were placed between human meniscal discs and were implanted subcutaneously in nude mice for 6 weeks (n = 16/group). Fluorescence microscopy demonstrated uniform attachment of the chondrocytes throughout the scaffolds 24 h following seeding. Cell attachment analysis revealed a significantly increased number of chondrocytes on PRP-pretreated than non-treated scaffolds (p < 0.05). Field emission scanning electron microscopy revealed chondrocytes attached to the PRP-pretreated scaffolds interconnecting their cellular processes with the fibrin network at 24 h and day 7 of culture. Of the 16 constructs containing PRP-pretreated scaffolds implanted in mice, six menisci healed completely, nine healed incompletely and one did not heal. Histological results from the 16 control constructs containing non-treated scaffolds revealed that none had healed completely, four healed incompletely and 12 did not heal. The histological outcome between the groups was significantly different (p < 0.05). These findings suggest that human articular chondrocytes on PRP-pretreated PLGA mesh scaffolds demonstrate increased cell attachment and enhance the healing capacity of meniscus with a reduced number of seeding cells in a meniscal repair mouse model. Copyright © 2014 John Wiley & Sons, Ltd.

Cranial bone regeneration according to different particle sizes and densities of demineralized dentin matrix in the rabbit model.

BACKGROUND: The objective of this study was to place bone graft materials in cranial defects in a rabbit model and compare their bone regenerating ability according to the size and density of demineralized dentin matrix (DDM). METHODS: We selected nine healthy male rabbits that were raised under the same conditions and that weighed about 3 kg. Two circular defects 8 mm in diameter were created in each side of the cranium. The defects were grafted with DDM using four different particle sizes and densities: 0.1 mL of 0.25- to 1.0-mm particles (group 1); 0.2 mL of 0.25- to 1.0-mm particles (group 2); 0.1 mL of 1.0- to 2.0-mm particles (group 3); and 0.2 mL of 1.0- to 2.0-mm particles (group 4). After 2, 4, and 8 weeks, the rabbits were sacrificed, and bone samples were evaluated by means of histologic, histomorphometric, and quantitative RT-PCR analysis. RESULTS: In group 1, osteoblast activity and bone formation were greater than in the other three groups on histological examination. In groups 2, 3, and 4, dense connective tissue was seen around original bone even after 8 weeks. Histomorphometric analysis of representative sections in group 1 showed a higher rate of new bone formation, but the difference from the other groups was not statistically significant. RT-PCR analysis indicated a correlation between bone formation and protein (osteonectin and osteopontin) expression. CONCLUSIONS: DDM with a space between particles of 200 µm was effective in bone formation, suggesting that materials with a small particle size could reasonably be used for bone grafting.

Pre-treatment of titanium alloy with platelet-rich plasma enhances human osteoblast responses.

Osseointegration, the histological direct bone-to-implant contact, is the ultimate goal of implant healing and the first prerequisite for long-term success of endosseous implants. It is well-known that metal implants with rough surfaces achieve better osseointegration than those with smooth surfaces in vivo. The implantation of metal materials into bone is always accompanied by bleeding. The implant surface is initially coated with blood and these initial events could determine subsequent osseointegration. However, there is little concordance between in vitro results and in vivo findings regarding the effect of surface roughness on osseointegration. Here, we show that the osteoblast response to metal surfaces pre-treated with platelets and plasma proteins elucidates the superior osseointegration of rough surfaced implants in vivo. We found that osteoblast attachment, proliferation, and osteoblastic differentiation were significantly higher on a rough titanium surface pre-treated with platelet-rich plasma (PRP) than on the same surface without pretreatment. Furthermore, we found that the three-dimensional fibrillar network formed on the rough surface of the titanium by PRP pre-treatment might enhance osteoblast responses. Our results demonstrate why osseointegration is found to be most active on metal implants with a rough surface in vivo. We anticipate that our assay would be a useful tool for mimicking the in vivo model of osseointegration. Because cellular responses to the titanium implant that are pre-treated with platelet and plasma proteins on their surfaces after the biomimetic process in vitro, may be more similar to the events that occur in vivo.

Comparison of three different methods for effective introduction of platelet-rich plasma on PLGA woven mesh.

For successful tissue regeneration, effective cell delivery to defect site is very important. Various types of polymer biomaterials have been developed and applied for effective cell delivery. PLGA (poly lactic-co-glycolic acid), a synthetic polymer, is a commercially available and FDA approved material. Platelet-rich plasma (PRP) is an autologous growth factor cocktail containing various growth factors including PDGF, TGFß-1 and BMPs, and has shown positive effects on cell behaviors. We hypothesized that PRP pretreatment on PLGA mesh using different methods would cause different patterns of platelet adhesion and stages which would modulate cell adhesion and proliferation on the PLGA mesh. In this study, we pretreated PRP on PLGA using three different methods including simple dripping (SD), dynamic oscillation (DO) and centrifugation (CE), then observed the amount of adhered platelets and their activation stage distribution. The highest amount of platelets was observed on CE mesh and calcium treated CE mesh. Moreover, calcium addition after PRP coating triggered dramatic activation of platelets which showed large and flat morphologies of platelets with rich fibrin networks. Human chondrocytes (hCs) and human bone marrow stromal cells (hBMSCs) were next cultured on PRP-pretreated PLGA meshes using different preparation methods. CE mesh showed a significant increase in the initial cell adhesion of hCs and proliferation of hBMSCs compared with SD and DO meshes. The results demonstrated that the centrifugation method can be considered as a promising coating method to introduce PRP on PLGA polymeric material which could improve cell-material interaction using a simple method.