Role of Dipolar Organic Cations on Light-triggered Charge Transfer at TiO2 /CH3 NH3 PbI3 Interfaces.

The TiO2 /MAPbI3 (MA=CH3 NH3 ) interfaces have manifested correlation with current-voltage hysteresis in perovskite solar cells (PSCs) under light illumination conditions, but the relations between the photo-induced charge transfer and the collective polarization response of the dipolar MA cations are largely unexplored. In this work, we adopt density functional theory (DFT) and time-dependent DFT approach to study the light-triggered charge transfer across the TiO2 /MAPbI3 interfaces with MAI- and PbI-exposed terminations. It is found that regardless of the surface exposure of the MAPbI3 , the photo-induced charge transfer varies when going from the ground-state geometries to the excited-state configurations. Besides, thanks to the electrostatic interactions between the ends of MA cations and the photogenerated electrons, the photo-induced charge transfer across the interfaces is enhanced (weakened) by the negatively (positively) charged CH3 (NH3 ) moieties of the MA species. Resultantly, the positively charged iodine vacancies at the TiO2 /MAPbI3 interfaces tend to inhibit the charge transfer induced by light. Combining with the energy level alignment which is significantly modulated by the orientation of the MA species at the interfaces, the dipolar MA cations might be a double-edge sword for the hysteresis in PSCs with the TiO2 /MAPbI3 interfaces.

Frenkel defects promote polaronic exciton dissociation in methylammonium lead iodide perovskites.

Hybrid organic-inorganic perovskite materials, such as CH3NH3PbI3, exhibit substantial potential in a variety of optoelectronic applications. Nevertheless, the interplay between the photoinduced excitations and iodine Frenkel defects which are abundant in CH3NH3PbI3 films remains poorly understood. Here we study the light-triggered electronic and excitonic properties in the presence of iodine Frenkel defects in CH3NH3PbI3 by using a combination of density functional theory (DFT) and time-dependent DFT approaches, the latter of which treats electron-hole and electron-nucleus interactions on the same footing. For isolated Frenkel defects, electrons are trapped close to the iodine vacancies and the electron-hole correlation brings the holes in close vicinity to the electrons, yielding tightly bound polaronic excitons. However, in the presence of multiple interactive Frenkel defects, the holes are pulled out from an electron-hole Coulomb well by the iodine interstitials, leading to spatially separated electron-hole pairs. The X-ray photoelectron spectra are then simulated, unravelling the light-triggered charge transfer induced by Frenkel defects at the atomistic level. We also find that the energy and spatial distributions of polaronic excitons at the Frenkel defects can be controlled by the dynamical rotation of organic cations.

The lowest-energy charge-transfer state and its role in charge separation in organic photovoltaics.

Energy independent, yet higher than 90% internal quantum efficiency (IQE), has been observed in many organic photovoltaics (OPVs). However, its physical origin remains largely unknown and controversial. The hypothesis that the lowest charge-transfer (CT) state may be weakly bound at the interface has been proposed to rationalize the experimental observations. In this paper, we study the nature of the lowest-energy CT (CT1) state, and show conclusively that the CT1 state is localized in typical OPVs. The electronic couplings in the donor and acceptor are found to determine the localization of the CT1 state. We examine the geminate recombination of the CT1 state and estimate its lifetime from first principles. We identify the vibrational modes that contribute to the geminate recombination. Using material parameters determined from first principles and experiments, we carry out kinetic Monte Carlo simulations to examine the charge separation of the localized CT1 state. We find that the localized CT1 state can indeed yield efficient charge separation with IQE higher than 90%. Dynamic disorder and configuration entropy can provide the energetic and entropy driving force for charge separation. Charge separation efficiency depends more sensitively on the dimension and crystallinity of the acceptor parallel to the interface than that normal to the interface. Reorganization energy is found to be the most important material parameter for charge separation, and lowering the reorganization energy of the donor should be pursued in the materials design.

Theoretical comparative studies on transport properties of pentacene, pentathienoacene, and 6,13-dichloropentacene.

Pentacene derivative 6,13-dichloropentacene (DCP) is one of the latest additions to the family of organic semiconductors with a great potential for use in transistors. We carry out a detailed theoretical calculation for DCP, with systematical comparison to pentacene, pentathienoacene (PTA, the thiophene equivalent of pentacene), to gain insights in the theoretical design of organic transport materials. The charge transport parameters and carrier mobilities are investigated from the first-principles calculations, based on the widely used Marcus electron transfer theory and quantum nuclear tunneling model, coupled with random walk simulation. Molecular structure and the crystal packing type are essential to understand the differences in their transport behaviors. With the effect of molecule modification, significant one-dimensional π-stacks are found within the molecular layer in PTA and DCP crystals. The charge transport along the a-axis plays a dominant role for the carrier mobilities in the DCP crystal due to the strong transfer integrals within the a-axis. Pentacene shows a relatively large 3D mobility. This is attributed to the relatively uniform electronic couplings, which thus provides more transport pathways. PTA has a much smaller 3D mobility than pentacene and DCP for the obvious increase of the reorganization energy with the introduction of thiophene. It is found that PTA and DCP exhibit lower HOMO (highest occupied molecular orbital) levels and better environmental stability, indicating the potential applications in organic electronics.

Organic cations promote exciton dissociation in Ruddlesden-Popper lead iodide perovskites: a theoretical study.

Two-dimensional (2D) Ruddlesden-Popper perovskites (RPPs) are a class of quantum well (QW) materials showing large exciton binding energy owing to quantum confinement. The existence of localized edge states was proposed to accelerate exciton dissociation into long-lived charge carriers in 2D RPPs, but recent experimental reports suggested that highly efficient internal exciton dissociation is achievable in 2D RPPs despite the absence of edge states. Herein, we adopt first-principles calculations to unveil the physical origin of the high internal quantum efficiency in the bulk region of widely familiar (BA)2(MA)n-1PbnI3n+1 (BA = butylammonium; MA = methylammonium) materials. We discover that the dipolar nature of MA cations provides the driving force for the separation of photoexcited electron-hole pairs inside QWs as the inorganic layer thickens from n = 1 to n = 3. Concurrently, electronic coupling between organic spacer layers and QWs is enhanced in the energetically favorable configurations where MA cations orient with their CH3 groups towards the exterior PbI2 layers of QWs in the n = 3 structure. Consequently, hole delocalization is promoted along the out-of-plane direction of QWs, which in turn facilitates exciton dissociation into free charge carriers despite large exciton binding energy. Our simulations reveal that the hydrogen bonding between organic species (including both MA and BA cations) and iodine atoms, which is subtly interconnected, engineers the response of morphology in QWs and electronic interactions at organic-inorganic interfaces, providing novel insights for the exciton-free carrier behavior in the bulk area of 2D RPPs.

Enhanced piezocatalytic and piezo-photocatalytic dye degradation via S-scheme mechanism with photodeposited nickel oxide nanoparticles on PbBiO2Br nanosheets.

The fabrication of an S-scheme heterojunction demonstrates as an efficient strategy for achieving efficient charge separation and enhancing catalytic activity of piezocatalysts. In this study, a new S-scheme heterojunction was fabricated on the PbBiO2Br surface through the photo-deposition of NiO nanoparticles. It was then employed in the piezoelectric catalytic degradation of Rhodamine B (RhB). The results demonstrate that the NiO/PbBiO2Br composite exhibits efficient performance in piezocatalytic RhB degradation. The optimal sample is the NiO/PbBiO2Br synthesized after 2 h of irradiation, achieving a RhB degradation rate of 3.11 h-1, which is 12.4 times higher than that of pure PbBiO2Br. Simultaneous exposure to visible light and ultrasound further increases in the RhB degradation rate, reaching 4.60 h-1, highlighting the synergistic effect of light and piezoelectricity in the NiO/PbBiO2Br composite. A comprehensive exploration of the charge migration mechanism at the NiO/PbBiO2Br heterojunction was undertaken through electrochemical analyses, theoretical calculations, and in-situ X-ray photoelectron spectroscopy analysis. The outcomes reveal that p-type semiconductor NiO and n-type semiconductor PbBiO2Br possess matching band structures, establishing an S-scheme heterojunction structure at their interface. Under the combined effects of band bending, interface electric fields, and Coulomb attraction, electrons and holes migrate and accumulate on the conduction band of PbBiO2Br and valence band of NiO, respectively, thereby achieving effective spatial separation of charge carriers. The catalyst's synergistic photo-piezoelectric catalysis effect can be ascribed to its role in promoting the generation and separation of charge carriers under both light irradiation and the piezoelectric field. The results of this investigation offer valuable insights into the development and production of catalytic materials that exhibit outstanding performance through the synergy of piezocatalysis and photocatalysis.

One-dimensional scintillator film with benign grain boundaries for high-resolution and fast x-ray imaging.

Fast and high-resolution x-ray imaging demands scintillator films with negligible afterglow, high scintillation yield, and minimized cross-talk. However, grain boundaries (GBs) are abundant in polycrystalline scintillator film, and, for current inorganic scintillators, detrimental dangling bonds at GBs inevitably extend radioluminescence lifetime and increase nonradiative recombination loss, deteriorating afterglow and scintillation yield. Here, we demonstrate that scintillators with one-dimensional (1D) crystal structure, Cs5Cu3Cl6I2 explored here, possess benign GBs without dangling bonds, yielding nearly identical afterglow and scintillation yield for single crystals and polycrystalline films. Because of its 1D crystal structure, Cs5Cu3Cl6I2 films with desired columnar morphology are easily obtained via close space sublimation, exhibit negligible afterglow (0.1% at 10 ms) and high scintillation yield (1.2 times of CsI:Tl). We have also demonstrated fast x-ray imaging with 27 line pairs mm-1 resolution and frame rate up to 33 fps, surpassing most existing scintillators. We believe that the 1D scintillators can greatly boost x-ray imaging performance.

Influence of lattice dynamics on charge transport in the dianthra[2,3-b:2',3'-f]-thieno[3,2-b]thiophene organic crystals from a theoretical study.

The influence of lattice dynamics on carrier mobility has received much attention in organic crystalline semiconductors, because the molecular components are held together by weak interactions and the transfer integrals between neighboring molecular orbitals are extremely sensitive to small nuclear displacements. Recently, it has been shown that the dynamic disorder has little effect on hole mobility in the ab plane of pentacene, but a reasonable explanation is absent for such a puzzle. To better understand the effect of lattice vibrations on carrier transport, a further study is required for other organic materials. In this work, a mixed molecular dynamic and quantum-chemical methodology is used to assess the effect of nuclear dynamics on hole mobility in the dianthra[2,3-b:2',3'-f]-thieno[3,2-b]thiophene (DATT) crystals which exhibit high air stability with the hole mobility as large as that in rubrene-based devices. It is found that the lattice vibrations lead to an increasing encumbrance for hole transport in the ab plane of the DATT crystals as the temperature increases. By comparing the crystal structures of DATT and pentacene, the reduced hole mobility in DATT is attributed to the unsymmetric arrays of nearest-neighboring molecular dimers in the ab plane, because the electronic coupling exhibits unbalanced thermal fluctuations for the nearest-neighboring dimers which then induces a stronger oscillation for carriers along the directions with asymmetric packing. To further relate the dynamic disorder with hole transport, the variations of anisotropic mobilities are also analyzed. As a result, the negligible effect of lattice dynamics on the hole mobility in pentacene is explained by the centrosymmetric molecular packing of the nearest-neighboring molecular pairs in the ab plane.

How Do A-Site Cations Regulate Trap States at Defective Surfaces of Lead Iodide Perovskites?

The defect properties at surfaces or grain boundaries of metal halide perovskites are largely unexplored due to the complexity of surface structures stirred by the rotational A-site cations with varied dipole moments. Using a combination of density functional theory (DFT) and time-dependent DFT methods, we study the nature of iodine vacancies at the surfaces of lead iodide perovskites (APbI3) with A-site cations including methylammonium (MA = CH3NH3+), formamidinium, and cesium. It is found that the light-induced charge distributions are sensitively dependent on MA orientation at the MAI-terminated surfaces with vacancies at the apical position while the electronic excitation is marginally affected by A-site species at both the AI- and PbI-terminated surfaces with vacancies at the equatorial site. Such variations of electronic excitation are rationalized by analyzing the electrostatic interactions between the A-site cations and charged defects as well as the projected p orbitals of Pb atoms at the bottom of the conduction band.

Crystalline Phases Regulate Electronic Trap States at Defective Surfaces of Lead Halide Perovskites.

The role of organic cations in A-sites of lead halide perovskites (LHPs) on carrier dynamics has been debated in an effort to understand the remarkable properties in these materials. However, the change of A-site species in LHPs often leads to the variation of crystalline phases at room temperature. Herein, we combine density functional theory (DFT) and time-dependent DFT methods to study electron traps in CH3NH3PbI3 which exhibits different structural phases with temperature and in APbBr3 [A = CH3NH3, CH(NH2)2, or Cs] with their crystalline phases at room temperature. Regardless of halide species, electron traps arising from halide vacancies at surfaces are spatially localized in tetragonal phase and turn to be rather delocalized in orthorhombic and cubic phases. The reason is revealed by analyzing the projected p orbitals of Pb atoms at conduction band edges, providing a novel strategy of healing surface defects to improving the performances of the LHP solar cells.

Influences of molecular packing on the charge mobility of organic semiconductors: from quantum charge transfer rate theory beyond the first-order perturbation.

The electronic coupling between adjacent molecules is an important parameter for the charge transport properties of organic semiconductors. In a previous paper, a semiclassical generalized nonadiabatic transition state theory was used to investigate the nonperturbative effect of the electronic coupling on the charge transport properties, but it is not applicable at low temperatures due to the presence of high-frequency modes from the intramolecular conjugated carbon-carbon stretching vibrations [G. J. Nan et al., J. Chem. Phys., 2009, 130, 024704]. In the present paper, we apply a quantum charge transfer rate formula based on the imaginary-time flux-flux correlation function without the weak electronic coupling approximation. The imaginary-time flux-flux correlation function is then expressed in terms of the vibrational-mode path average and is evaluated by the path integral approach. All parameters are computed by quantum chemical approaches, and the mobility is obtained by kinetic Monte-Carlo simulation. We evaluate the intra-layer mobility of sexithiophene crystal structures in high- and low-temperature phases for a wide range of temperatures. In the case of strong coupling, the quantum charge transfer rates were found to be significantly smaller than those calculated using the weak electronic coupling approximation, which leads to reduced mobility especially at low temperatures. As a consequence, the mobility becomes less dependent on temperature when the molecular packing leads to strong electronic coupling in some charge transport directions. The temperature-independent charge mobility in organic thin-film transistors from experimental measurements may be explained from the present model with the grain boundaries considered. In addition, we point out that the widely used Marcus equation is invalid in calculating charge carrier transfer rates in sexithiophene crystals.

Computational methods for design of organic materials with high charge mobility.

Charge carrier mobility is at the center of organic electronic devices. The strong couplings between electrons and nuclear motions lead to complexities in theoretical description of charge transport, which pose a major challenge for the fundamental understanding and computational design of transport organic materials. This tutorial review describes recent progresses in developing computational tools to assess the carrier mobility in organic molecular semiconductors at the first-principles level. Some rational molecular design strategies for high mobility organic materials are outlined.

Unveiling the Nature of Light-Triggered Hole Traps in Lead Halide Perovskites: A Study with Time-Dependent Density Functional Theory.

Structural variations of lead halide perovskites (LHPs) upon light illumination play an important role in their photovoltaic applications. However, density functional theory (DFT)-based simulations have often been performed to unveil the nature of defects in LHPs without light illumination. So far, the nature of traps in LHPs triggered by the light remains largely unexplored. In this work, hole traps induced by the halogen interstitial in LHPs are studied by combining DFT and time-dependent DFT approaches, the latter of which treats electron-hole and electron-nuclei interactions on the same footing. Both a semilocal exchange functional and hybrid functional are adopted to relax the ground-state and excited-state geometries followed by the calculations of energy levels of hole traps. The effect of the self-interaction corrections on the light-triggered geometric deformation and the electronic structure of hole traps is analyzed. Relaxation energies that correspond to the light-triggered geometric deformation are also calculated with different functionals. The relationship between the hole traps and light-triggered geometric variations are then explored.

Organic Cations Protect Methylammonium Lead Iodide Perovskites against Small Exciton-Polaron Formation.

Working organic-inorganic lead halide perovskite-based devices are notoriously sensitive to surface and interface effects. Using a combination of density functional theory (DFT) and time-dependent DFT methods, we report a comprehensive study of the changes (with respect to the bulk) in geometric and electronic structures going on at the (001) surface of a (tetragonal phase) methylammonium lead iodide perovskite slab, in the dark and upon photoexcitation. The formation of a hydrogen bonding pattern between the -NH3 groups of the organic cations and the iodine atoms of the outer inorganic layout is found to critically contribute to the relative thermodynamic stability of slabs with varying surface compositions and terminations. Most importantly, our results show that the hydrogen bond locking effects induced by the MA groups tend to protect the external two-dimensional lattice against large local structural deformations, i.e., the formation of a small exciton-polaron, at variance with purely inorganic lead halide perovskites.

Nonperturbative time-convolutionless quantum master equation from the path integral approach.

The time-convolutionless quantum master equation is widely used to simulate reduced dynamics of a quantum system coupled to a bath. However, except for several special cases, applications of this equation are based on perturbative calculation of the dissipative tensor, and are limited to the weak system-bath coupling regime. In this paper, we derive an exact time-convolutionless quantum master equation from the path integral approach, which provides a new way to calculate the dissipative tensor nonperturbatively. Application of the new method is demonstrated in the case of an asymmetrical two-level system linearly coupled to a harmonic bath.

Charge transfer rates in organic semiconductors beyond first-order perturbation: from weak to strong coupling regimes.

Semiclassical Marcus electron transfer theory is often employed to investigate the charge transport properties of organic semiconductors. However, quite often the electronic couplings vary several orders of magnitude in organic crystals, which goes beyond the application scope of semiclassical Marcus theory with the first-order perturbative nature. In this work, we employ a generalized nonadiabatic transition state theory (GNTST) [Zhao et al., J. Phys. Chem. A 110, 8204 (2004)], which can evaluate the charge transfer rates from weak to strong couplings, to study charge transport properties in prototypical organic semiconductors: quaterthiophene and sexithiophene single crystals. By comparing with GNTST results, we find that the semiclassical Marcus theory is valid for the case of the coupling <10 meV for quaterthiophene and <5 meV for sexithiophene. It is shown that the present approach can be applied to design organic semiconductors with general electronic coupling terms. Taking oligothiophenes as examples, we find that our GNTST-calculated hole mobility is about three times as large as that from the semiclassical Marcus theory. The difference arises from the quantum nuclear tunneling and the nonperturbative effects.

Electron transfer dynamics: Zusman equation versus exact theory.

The Zusman equation has been widely used to study the effect of solvent dynamics on electron transfer reactions. However, application of this equation is limited by the classical treatment of the nuclear degrees of freedom. In this paper, we revisit the Zusman equation in the framework of the exact hierarchical equations of motion formalism, and show that a high temperature approximation of the hierarchical theory is equivalent to the Zusman equation in describing electron transfer dynamics. Thus the exact hierarchical formalism naturally extends the Zusman equation to include quantum nuclear dynamics at low temperatures. This new finding has also inspired us to rescale the original hierarchical equations and incorporate a filtering algorithm to efficiently propagate the hierarchical equations. Numerical exact results are also presented for the electron transfer reaction dynamics and rate constant calculations.

Efficient hierarchical Liouville space propagator to quantum dissipative dynamics.

We propose an efficient method to propagate the hierarchical quantum master equations based on a reformulation of the original formalism and the incorporation of a filtering algorithm that automatically truncates the hierarchy with a preselected tolerance. The new method is applied to calculate electron transfer dynamics in a spin-boson model and the absorption spectra of an excitonic dimmer. The proposed method significantly reduces the number of auxiliary density operators used in the hierarchical equation approach and thus provides an efficient way capable of studying real time dynamics of non-Markovian quantum dissipative systems in strong system-bath coupling and low temperature regimes.

Self-Healing of Photocurrent Degradation in Perovskite Solar Cells: The Role of Defect-Trapped Excitons.

Solution-processed lead halide perovskites have emerged as one of the most promising materials in optoelectronic applications. However, the perovskites are not stable over prolonged solar illumination. A recent experimental study has revealed light-activated photocurrent degradation and self-healing in lead halide perovskites, which has important implications in tackling the photostability problems of the perovskites. Unfortunately, the physical origin of the experimental observations is unclear. In this work, we propose a first-principles theory that can elucidate all key experimental observations. By focusing on defect-trapped excitons, the theory can rationalize both fast and slow time scales of self-healing, contrasting dynamics of the photocurrent degradation and its recovery, and the steep temperature dependence of the two competing processes. We further predict that the same phenomenon of self-healing could also be observed in other lead halide perovskites with even faster time scales of recovery. The work provides a general framework for elucidating defect-controlled excitation dynamics in perovskites.

Engineering Chemically Active Defects in Monolayer MoS2 Transistors via Ion-Beam Irradiation and Their Healing via Vapor Deposition of Alkanethiols.

Irradiation of 2D sheets of transition metal dichalcogenides with ion beams has emerged as an effective approach to engineer chemically active defects in 2D materials. In this context, argon-ion bombardment has been utilized to introduce sulfur vacancies in monolayer molybdenum disulfide (MoS2 ). However, a detailed understanding of the effects of generated defects on the functional properties of 2D MoS2 is still lacking. In this work, the correlation between critical electronic device parameters and the density of sulfur vacancies is systematically investigated through the fabrication and characterization of back-gated monolayer MoS2 field-effect transistors (FETs) exposed to a variable fluence of low-energy argon ions. The electrical properties of pristine and ion-irradiated FETs can be largely improved/recovered by exposing the devices to vapors of short linear thiolated molecules. Such a solvent-free chemical treatment-carried out strictly under inert atmosphere-rules out secondary healing effects induced by oxygen or oxygen-containing molecules. The results provide a guideline to design monolayer MoS2 optoelectronic devices with a controlled density of sulfur vacancies, which can be further exploited to introduce ad hoc molecular functionalities by means of thiol chemistry approaches.