Sensor Equipped UAS for Non-Contact Bridge Inspections: Field Application.

In the future, sensors mounted on uncrewed aerial systems (UASs) will play a critical role in increasing both the speed and safety of structural inspections. Environmental and safety concerns make structural inspections and maintenance challenging when conducted using traditional methods, especially for large structures. The methods developed and tested in the laboratory need to be tested in the field on real-size structures to identify their potential for full implementation. This paper presents results from a full-scale field implementation of a novel sensor equipped with UAS to measure non-contact transverse displacement from a pedestrian bridge. To this end, the authors modified and upgraded a low-cost system that previously showed promise in laboratory and small-scale outdoor settings so that it could be tested on an in-service bridge. The upgraded UAS system uses a commodity drone platform, low-cost sensors including a laser range-finder, and a computer vision-based algorithm with the aim of measuring bridge displacements under load indicative of structural problems. The aim of this research is to alleviate the costs and challenges associated with sensor attachment in bridge inspections and deliver the first prototype of a UAS-based non-contact out-of-plane displacement measurement. This work helps to define the capabilities and limitations of the proposed low-cost system in obtaining non-contact transverse displacement in outdoor experiments.

Use of Remote Structural Tap Testing Devices Deployed via Ground Vehicle for Health Monitoring of Transportation Infrastructure.

Transportation infrastructure is an integral part of the world's overall functionality; however, current transportation infrastructure has aged since it was first developed and implemented. Consequently, given its condition, preservation has become a main priority for transportation agencies. Billions of dollars annually are required to maintain the United States' transportation system; however, with limited budgets the prioritization of maintenance and repairs is key. Structural Health Monitoring (SHM) methods can efficiently inform the prioritization of preservation efforts. This paper presents an acoustic monitoring SHM method, deemed tap testing, which is used to detect signs of deterioration in structural/mechanical surfaces through nondestructive means. This method is proposed as a tool to assist bridge inspectors, who already utilize a costly form of SHM methodology when conducting inspections in the field. Challenges arise when it comes to this method of testing, especially when SHM device deployment is done by hand, and when the results are based solely upon a given inspector's abilities. This type of monitoring solution is also, in general, only available to experts, and is associated with special cases that justify their cost. With the creation of a low-cost, cyber-physical system that interrogates and classifies the mechanical health of given surfaces, we lower the cost of SHM, decrease the challenges faced when conducting such tests, and enable communities with a revolutionary solution that is adaptable to their needs. The authors of this paper created and tested a low-cost, interrogating robot that informs users of structural/mechanical defects. This research describes the further development, validation of, and experimentation with, a tap testing device that utilizes remote technology.

Measuring Transverse Displacements Using Unmanned Aerial Systems Laser Doppler Vibrometer (UAS-LDV): Development and Field Validation.

Measurement of bridge displacements is important for ensuring the safe operation of railway bridges. Traditionally, contact sensors such as Linear Variable Displacement Transducers (LVDT) and accelerometers have been used to measure the displacement of the railway bridges. However, these sensors need significant effort in installation and maintenance. Therefore, railroad management agencies are interested in new means to measure bridge displacements. This research focuses on mounting Laser Doppler Vibrometer (LDV) on an Unmanned Aerial System (UAS) to enable contact-free transverse dynamic displacement of railroad bridges. Researchers conducted three field tests by flying the Unmanned Aerial Systems Laser Doppler Vibrometer (UAS-LDV) 1.5 m away from the ground and measured the displacement of a moving target at various distances. The accuracy of the UAS-LDV measurements was compared to the Linear Variable Differential Transducer (LVDT) measurements. The results of the three field tests showed that the proposed system could measure non-contact, reference-free dynamic displacement with an average peak and root mean square (RMS) error for the three experiments of 10% and 8% compared to LVDT, respectively. Such errors are acceptable for field measurements in railroads, as the interest prior to bridge monitoring implementation of a new approach is to demonstrate similar success for different flights, as reported in the three results. This study also identified barriers for industrial adoption of this technology and proposed operational development practices for both technical and cost-effective implementation.